ARM: dts: imx27 cpufreq-cpu0 frequencies

Set operating-points for imx27. There is no regulator support, so the
voltages are 0. The frequencies should be the same for all imx27 boards,
so it is defined here and can be overwritten if necessary.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index dce851c7174d6c41bbd253c6a844af5f282e02c6..a587294fe28403b70e67304ae868c2d5c8fb77a0 100644 (file)
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -49,6 +49,24 @@
                };
        };
 
+       cpus {
+               #size-cells = <0>;
+               #address-cells = <1>;
+
+               cpu {
+                       device_type = "cpu";
+                       compatible = "arm,arm926ej-s";
+                       operating-points = <
+                               /* kHz  uV (No regulator support) */
+                               133000  0
+                               399000  0
+                       >;
+                       clock-latency = <61036>; /* two CLK32 periods */
+                       clocks = <&clks 18>;
+                       clock-names = "cpu";
+               };
+       };
+
        soc {
                #address-cells = <1>;
                #size-cells = <1>;