return 0;
}
+/*
+ * DO NOT change the device Ids. The naming is intentionally specific as both
+ * the PMIC and CODEC parts of this chip are instantiated separately as I2C
+ * devices (both have configurable I2C addresses, and are to all intents and
+ * purposes separate). As a result there are specific DA9055 ids for PMIC
+ * and CODEC, which must be different to operate together.
+ */
static struct i2c_device_id da9055_i2c_id[] = {
- {"da9055", 0},
+ {"da9055-pmic", 0},
{ }
};
+MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
static struct i2c_driver da9055_i2c_driver = {
.probe = da9055_i2c_probe,
.remove = da9055_i2c_remove,
.id_table = da9055_i2c_id,
.driver = {
- .name = "da9055",
+ .name = "da9055-pmic",
.owner = THIS_MODULE,
},
};
config SND_BF5XX_SOC_SSM2602
tristate "SoC SSM2602 Audio Codec Add-On Card support"
- depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
select SND_BF5XX_SOC_I2S if !BF60x
select SND_BF6XX_SOC_I2S if BF60x
select SND_SOC_SSM2602
config SND_SOC_BFIN_EVAL_ADAU1701
tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"
- depends on SND_BF5XX_I2S
+ depends on SND_BF5XX_I2S && I2C
select SND_BF5XX_SOC_I2S
select SND_SOC_ADAU1701
- select I2C
help
Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ
board connected to one of the Blackfin evaluation boards like the
config SND_SOC_BFIN_EVAL_ADAV80X
tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"
- depends on SND_BF5XX_I2S && (SPI_MASTER || I2C)
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
select SND_BF5XX_SOC_I2S
select SND_SOC_ADAV80X
help
config SND_BF5XX_SOC_AD1836
tristate "SoC AD1836 Audio support for BF5xx"
- depends on SND_BF5XX_I2S
+ depends on SND_BF5XX_I2S && SPI_MASTER
select SND_BF5XX_SOC_I2S
select SND_SOC_AD1836
help
config SND_BF5XX_SOC_AD193X
tristate "SoC AD193X Audio support for Blackfin"
- depends on SND_BF5XX_I2S
+ depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI
select SND_BF5XX_SOC_I2S
select SND_SOC_AD193X
help
return 0;
}
+/*
+ * DO NOT change the device Ids. The naming is intentionally specific as both
+ * the CODEC and PMIC parts of this chip are instantiated separately as I2C
+ * devices (both have configurable I2C addresses, and are to all intents and
+ * purposes separate). As a result there are specific DA9055 Ids for CODEC
+ * and PMIC, which must be different to operate together.
+ */
static const struct i2c_device_id da9055_i2c_id[] = {
- { "da9055", 0 },
+ { "da9055-codec", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, da9055_i2c_id);
/* I2C codec control layer */
static struct i2c_driver da9055_i2c_driver = {
.driver = {
- .name = "da9055",
+ .name = "da9055-codec",
.owner = THIS_MODULE,
},
.probe = da9055_i2c_probe,
case M98090_REG_RECORD_TDM_SLOT:
case M98090_REG_SAMPLE_RATE:
case M98090_REG_DMIC34_BIQUAD_BASE ... M98090_REG_DMIC34_BIQUAD_BASE + 0x0E:
+ case M98090_REG_REVISION_ID:
return true;
default:
return false;
switch (level) {
case SND_SOC_BIAS_ON:
- if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
- ret = regcache_sync(max98090->regmap);
-
- if (ret != 0) {
- dev_err(codec->dev,
- "Failed to sync cache: %d\n", ret);
- return ret;
- }
- }
-
if (max98090->jack_state == M98090_JACK_STATE_HEADSET) {
/*
* Set to normal bias level.
break;
case SND_SOC_BIAS_STANDBY:
+ if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ ret = regcache_sync(max98090->regmap);
+ if (ret != 0) {
+ dev_err(codec->dev,
+ "Failed to sync cache: %d\n", ret);
+ return ret;
+ }
+ }
+ break;
+
case SND_SOC_BIAS_OFF:
/* Set internal pull-up to lowest power mode */
snd_soc_update_bits(codec, M98090_REG_JACK_DETECT,
#ifdef CONFIG_ACPI
static struct acpi_device_id rt5640_acpi_match[] = {
{ "INT33CA", 0 },
+ { "10EC5640", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, rt5640_acpi_match);
.driver = {
.name = "davinci_evm",
.owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
.of_match_table = of_match_ptr(davinci_evm_dt_ids),
},
};
unsigned int fmt)
{
struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(cpu_dai);
+ int ret = 0;
+ pm_runtime_get_sync(mcasp->dev);
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_B:
case SND_SOC_DAIFMT_AC97:
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
-
- return 0;
+out:
+ pm_runtime_put_sync(mcasp->dev);
+ return ret;
}
static int davinci_mcasp_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
return 0;
}
-static int davinci_hw_common_param(struct davinci_mcasp *mcasp, int stream,
+static int mcasp_common_hw_param(struct davinci_mcasp *mcasp, int stream,
int channels)
{
int i;
return 0;
}
-static void davinci_hw_param(struct davinci_mcasp *mcasp, int stream)
+static int mcasp_i2s_hw_param(struct davinci_mcasp *mcasp, int stream)
{
int i, active_slots;
u32 mask = 0;
u32 busel = 0;
+ if ((mcasp->tdm_slots < 2) || (mcasp->tdm_slots > 32)) {
+ dev_err(mcasp->dev, "tdm slot %d not supported\n",
+ mcasp->tdm_slots);
+ return -EINVAL;
+ }
+
active_slots = (mcasp->tdm_slots > 31) ? 32 : mcasp->tdm_slots;
for (i = 0; i < active_slots; i++)
mask |= (1 << i);
if (!mcasp->dat_port)
busel = TXSEL;
- if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* bit stream is MSB first with no delay */
- /* DSP_B mode */
- mcasp_set_reg(mcasp, DAVINCI_MCASP_TXTDM_REG, mask);
- mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, busel | TXORD);
-
- if ((mcasp->tdm_slots >= 2) && (mcasp->tdm_slots <= 32))
- mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG,
- FSXMOD(mcasp->tdm_slots), FSXMOD(0x1FF));
- else
- printk(KERN_ERR "playback tdm slot %d not supported\n",
- mcasp->tdm_slots);
- } else {
- /* bit stream is MSB first with no delay */
- /* DSP_B mode */
- mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, busel | RXORD);
- mcasp_set_reg(mcasp, DAVINCI_MCASP_RXTDM_REG, mask);
-
- if ((mcasp->tdm_slots >= 2) && (mcasp->tdm_slots <= 32))
- mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG,
- FSRMOD(mcasp->tdm_slots), FSRMOD(0x1FF));
- else
- printk(KERN_ERR "capture tdm slot %d not supported\n",
- mcasp->tdm_slots);
- }
+ mcasp_set_reg(mcasp, DAVINCI_MCASP_TXTDM_REG, mask);
+ mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, busel | TXORD);
+ mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG,
+ FSXMOD(mcasp->tdm_slots), FSXMOD(0x1FF));
+
+ mcasp_set_reg(mcasp, DAVINCI_MCASP_RXTDM_REG, mask);
+ mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, busel | RXORD);
+ mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG,
+ FSRMOD(mcasp->tdm_slots), FSRMOD(0x1FF));
+
+ return 0;
}
/* S/PDIF */
-static void davinci_hw_dit_param(struct davinci_mcasp *mcasp)
+static int mcasp_dit_hw_param(struct davinci_mcasp *mcasp)
{
/* Set the TX format : 24 bit right rotation, 32 bit slot, Pad 0
and LSB first */
/* Enable the DIT */
mcasp_set_bits(mcasp, DAVINCI_MCASP_TXDITCTL_REG, DITEN);
+
+ return 0;
}
static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
u8 slots = mcasp->tdm_slots;
u8 active_serializers;
int channels;
+ int ret;
struct snd_interval *pcm_channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
channels = pcm_channels->min;
active_serializers = (channels + slots - 1) / slots;
- if (davinci_hw_common_param(mcasp, substream->stream, channels) == -EINVAL)
+ if (mcasp_common_hw_param(mcasp, substream->stream, channels) == -EINVAL)
return -EINVAL;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
fifo_level = mcasp->txnumevt * active_serializers;
fifo_level = mcasp->rxnumevt * active_serializers;
if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE)
- davinci_hw_dit_param(mcasp);
+ ret = mcasp_dit_hw_param(mcasp);
else
- davinci_hw_param(mcasp, substream->stream);
+ ret = mcasp_i2s_hw_param(mcasp, substream->stream);
+
+ if (ret)
+ return ret;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_U8:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- ret = pm_runtime_get_sync(mcasp->dev);
- if (IS_ERR_VALUE(ret))
- dev_err(mcasp->dev, "pm_runtime_get_sync() failed\n");
davinci_mcasp_start(mcasp, substream->stream);
break;
-
case SNDRV_PCM_TRIGGER_SUSPEND:
- davinci_mcasp_stop(mcasp, substream->stream);
- ret = pm_runtime_put_sync(mcasp->dev);
- if (IS_ERR_VALUE(ret))
- dev_err(mcasp->dev, "pm_runtime_put_sync() failed\n");
- break;
-
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
davinci_mcasp_stop(mcasp, substream->stream);
regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA,
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask));
regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB,
- ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(tx_mask));
+ ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask));
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA,
ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask));
regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB,
- ESAI_xSMA_xS_MASK, ESAI_xSMB_xS(rx_mask));
+ ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
esai_priv->slot_width = slot_width;
#define ESAI_xSMB_xS_SHIFT 0
#define ESAI_xSMB_xS_WIDTH 16
#define ESAI_xSMB_xS_MASK (((1 << ESAI_xSMB_xS_WIDTH) - 1) << ESAI_xSMB_xS_SHIFT)
-#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMA_xS_MASK)
+#define ESAI_xSMB_xS(v) (((v) >> ESAI_xSMA_xS_WIDTH) & ESAI_xSMB_xS_MASK)
/* Port C Direction Register -- REG_ESAI_PRRC 0xF8 */
#define ESAI_PRRC_PDC_SHIFT 0
.driver = {
.name = "imx_mc13783",
.owner = THIS_MODULE,
- .pm = &snd_soc_pm_ops,
},
.probe = imx_mc13783_probe,
.remove = imx_mc13783_remove
static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd)
{
- struct imx_sgtl5000_data *data = container_of(rtd->card,
- struct imx_sgtl5000_data, card);
+ struct imx_sgtl5000_data *data = snd_soc_card_get_drvdata(rtd->card);
struct device *dev = rtd->card->dev;
int ret;
data->card.dapm_widgets = imx_sgtl5000_dapm_widgets;
data->card.num_dapm_widgets = ARRAY_SIZE(imx_sgtl5000_dapm_widgets);
+ platform_set_drvdata(pdev, &data->card);
+ snd_soc_card_set_drvdata(&data->card, data);
+
ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
goto fail;
}
- platform_set_drvdata(pdev, data);
of_node_put(ssi_np);
of_node_put(codec_np);
static int imx_sgtl5000_remove(struct platform_device *pdev)
{
- struct imx_sgtl5000_data *data = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct imx_sgtl5000_data *data = snd_soc_card_get_drvdata(card);
clk_put(data->codec_clk);
{
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
struct imx_priv *priv = &card_priv;
- struct imx_wm8962_data *data = platform_get_drvdata(priv->pdev);
+ struct imx_wm8962_data *data = snd_soc_card_get_drvdata(card);
struct device *dev = &priv->pdev->dev;
unsigned int pll_out;
int ret;
{
struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
struct imx_priv *priv = &card_priv;
- struct imx_wm8962_data *data = platform_get_drvdata(priv->pdev);
+ struct imx_wm8962_data *data = snd_soc_card_get_drvdata(card);
struct device *dev = &priv->pdev->dev;
int ret;
data->card.late_probe = imx_wm8962_late_probe;
data->card.set_bias_level = imx_wm8962_set_bias_level;
+ platform_set_drvdata(pdev, &data->card);
+ snd_soc_card_set_drvdata(&data->card, data);
+
ret = devm_snd_soc_register_card(&pdev->dev, &data->card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
goto clk_fail;
}
- platform_set_drvdata(pdev, data);
of_node_put(ssi_np);
of_node_put(codec_np);
static int imx_wm8962_remove(struct platform_device *pdev)
{
- struct imx_wm8962_data *data = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct imx_wm8962_data *data = snd_soc_card_get_drvdata(card);
if (!IS_ERR(data->codec_clk))
clk_disable_unprepare(data->codec_clk);
select SND_SOC_WM8750
select SND_S3C2412_SOC_I2S
help
- Sat Y if you want to add support for SoC audio on the Jive.
+ Say Y if you want to add support for SoC audio on the Jive.
config SND_SOC_SAMSUNG_SMDK_WM8580
tristate "SoC I2S Audio support for WM8580 on SMDK"
config SND_SOC_SAMSUNG_SMDK_WM9713
tristate "SoC AC97 Audio support for SMDK with WM9713"
- depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110 || MACH_SMDKV310 || MACH_SMDKC210)
+ depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
select SND_SOC_WM9713
select SND_SAMSUNG_AC97
help
- Sat Y if you want to add support for SoC audio on the SMDK.
+ Say Y if you want to add support for SoC audio on the SMDK.
config SND_SOC_SMARTQ
tristate "SoC I2S Audio support for SmartQ board"
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(drvdata->base))
return PTR_ERR(drvdata->base);
- drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
platform_set_drvdata(pdev, drvdata);
drvdata->physbase = r->start;
if (sizeof(drvdata->physbase) > sizeof(r->start) &&
projects / ~andy / linux / commitdiff