queuing transfers that arrive in the meantime. When the driver is
finished with this message, it must call
spi_finalize_current_message() so the subsystem can issue the next
- transfer. This may sleep.
+ message. This may sleep.
+
+ master->transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ The subsystem calls the driver to transfer a single transfer while
+ queuing transfers that arrive in the meantime. When the driver is
+ finished with this transfer, it must call
+ spi_finalize_current_transfer() so the subsystem can issue the next
+ transfer. This may sleep. Note: transfer_one and transfer_one_message
+ are mutually exclusive; when both are set, the generic subsystem does
+ not call your transfer_one callback.
+
+ Return values:
+ negative errno: error
+ 0: transfer is finished
+ 1: transfer is still in progress
DEPRECATED METHODS
def_tristate SPI_PXA2XX && PCI
config SPI_RSPI
- tristate "Renesas RSPI controller"
+ tristate "Renesas RSPI/QSPI controller"
depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE
help
- SPI driver for Renesas RSPI blocks.
+ SPI driver for Renesas RSPI and QSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
init_completion(&hw->done);
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ if (hw->pdata->lsb)
+ master->mode_bits |= SPI_LSB_FIRST;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
* message while queuing transfers that arrive in the meantime. When the
* driver is finished with this message, it must call
* spi_finalize_current_message() so the subsystem can issue the next
- * transfer
+ * message
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
* - return 1 if the transfer is still in progress. When
* the driver is finished with this transfer it must
* call spi_finalize_current_transfer() so the subsystem
- * can issue the next transfer
+ * can issue the next transfer. Note: transfer_one and
+ * transfer_one_message are mutually exclusive; when both
+ * are set, the generic subsystem does not call your
+ * transfer_one callback.
* @unprepare_message: undo any work done by prepare_message().
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that