#include <asm/compiler.h>
-#define mb() \
-__asm__ __volatile__("mb": : :"memory")
+#define mb() __asm__ __volatile__("mb": : :"memory")
+#define rmb() __asm__ __volatile__("mb": : :"memory")
+#define wmb() __asm__ __volatile__("wmb": : :"memory")
-#define rmb() \
-__asm__ __volatile__("mb": : :"memory")
-
-#define wmb() \
-__asm__ __volatile__("wmb": : :"memory")
-
-#define read_barrier_depends() \
-__asm__ __volatile__("mb": : :"memory")
+#define read_barrier_depends() __asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
#define __ASM_SMP_MB "\tmb\n"
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
#else
#define __ASM_SMP_MB
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
#endif
-#define set_mb(var, value) \
-do { var = value; mb(); } while (0)
+#include <asm-generic/barrier.h>
#endif /* __BARRIER_H */
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += barrier.h
#ifndef __ASM_AVR32_BARRIER_H
#define __ASM_AVR32_BARRIER_H
-#define nop() asm volatile("nop")
-
-#define mb() asm volatile("" : : : "memory")
-#define rmb() mb()
-#define wmb() asm volatile("sync 0" : : : "memory")
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value) do { var = value; mb(); } while(0)
+/*
+ * Weirdest thing ever.. no full barrier, but it has a write barrier!
+ */
+#define wmb() asm volatile("sync 0" : : : "memory")
#ifdef CONFIG_SMP
# error "The AVR32 port does not support SMP"
-#else
-# define smp_mb() barrier()
-# define smp_rmb() barrier()
-# define smp_wmb() barrier()
-# define smp_read_barrier_depends() do { } while(0)
#endif
+#include <asm-generic/barrier.h>
#endif /* __ASM_AVR32_BARRIER_H */
# define rmb() do { barrier(); smp_check_barrier(); } while (0)
# define wmb() do { barrier(); smp_mark_barrier(); } while (0)
# define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0)
-#else
-# define mb() barrier()
-# define rmb() barrier()
-# define wmb() barrier()
-# define read_barrier_depends() do { } while (0)
#endif
-#else /* !CONFIG_SMP */
-
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define read_barrier_depends() do { } while (0)
-
#endif /* !CONFIG_SMP */
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define smp_read_barrier_depends() read_barrier_depends()
+#include <asm-generic/barrier.h>
#endif /* _BLACKFIN_BARRIER_H */
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += barrier.h
+++ /dev/null
-#ifndef __ASM_CRIS_BARRIER_H
-#define __ASM_CRIS_BARRIER_H
-
-#define nop() __asm__ __volatile__ ("nop");
-
-#define barrier() __asm__ __volatile__("": : :"memory")
-#define mb() barrier()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#endif /* __ASM_CRIS_BARRIER_H */
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
-#define read_barrier_depends() do { } while (0)
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do {} while(0)
-#define set_mb(var, value) \
- do { var = (value); barrier(); } while (0)
+#include <asm-generic/barrier.h>
#endif /* _ASM_BARRIER_H */
generic-y += unaligned.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += barrier.h
#define nop() __asm__ __volatile__ ("nop" : : )
-/*
- * Memory barrier.
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- */
-#define mb() barrier()
-#define rmb() mb()
-#define wmb() mb()
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
+#include <asm-generic/barrier.h>
#endif /* _ASM_M32R_BARRIER_H */
#ifndef _M68K_BARRIER_H
#define _M68K_BARRIER_H
-/*
- * Force strict CPU ordering.
- * Not really required on m68k...
- */
#define nop() do { asm volatile ("nop"); barrier(); } while (0)
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define read_barrier_depends() ((void)0)
-#define set_mb(var, value) ({ (var) = (value); wmb(); })
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() ((void)0)
+#include <asm-generic/barrier.h>
#endif /* _M68K_BARRIER_H */
generic-y += trace_clock.h
generic-y += syscalls.h
generic-y += preempt.h
+generic-y += barrier.h
+++ /dev/null
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BARRIER_H
-#define _ASM_MICROBLAZE_BARRIER_H
-
-#define nop() asm volatile ("nop")
-
-#define smp_read_barrier_depends() do {} while (0)
-#define read_barrier_depends() do {} while (0)
-
-#define mb() barrier()
-#define rmb() mb()
-#define wmb() mb()
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-
-#endif /* _ASM_MICROBLAZE_BARRIER_H */
generic-y += exec.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += barrier.h
+++ /dev/null
-/* MN10300 memory barrier definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_BARRIER_H
-#define _ASM_BARRIER_H
-
-#define nop() asm volatile ("nop")
-
-#define mb() asm volatile ("": : :"memory")
-#define rmb() mb()
-#define wmb() asm volatile ("": : :"memory")
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
-#else /* CONFIG_SMP */
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#endif /* CONFIG_SMP */
-
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
-#define read_barrier_depends() do {} while (0)
-#define smp_read_barrier_depends() do {} while (0)
-
-#endif /* _ASM_BARRIER_H */
poll.h xor.h clkdev.h exec.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += barrier.h
+++ /dev/null
-#ifndef __PARISC_BARRIER_H
-#define __PARISC_BARRIER_H
-
-/*
-** This is simply the barrier() macro from linux/kernel.h but when serial.c
-** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
-** hasn't yet been included yet so it fails, thus repeating the macro here.
-**
-** PA-RISC architecture allows for weakly ordered memory accesses although
-** none of the processors use it. There is a strong ordered bit that is
-** set in the O-bit of the page directory entry. Operating systems that
-** can not tolerate out of order accesses should set this bit when mapping
-** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
-** of the processor implemented the PSW O-bit). The PCX-W ERS states that
-** the TLB O-bit is not implemented so the page directory does not need to
-** have the O-bit set when mapping pages (section 3.1). This section also
-** states that the PSW Y, Z, G, and O bits are not implemented.
-** So it looks like nothing needs to be done for parisc-linux (yet).
-** (thanks to chada for the above comment -ggg)
-**
-** The __asm__ op below simple prevents gcc/ld from reordering
-** instructions across the mb() "call".
-*/
-#define mb() __asm__ __volatile__("":::"memory") /* barrier() */
-#define rmb() mb()
-#define wmb() mb()
-#define smp_mb() mb()
-#define smp_rmb() mb()
-#define smp_wmb() mb()
-#define smp_read_barrier_depends() do { } while(0)
-#define read_barrier_depends() do { } while(0)
-
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-
-#endif /* __PARISC_BARRIER_H */
generic-y += trace_clock.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += barrier.h
+++ /dev/null
-#ifndef _ASM_SCORE_BARRIER_H
-#define _ASM_SCORE_BARRIER_H
-
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-
-#define read_barrier_depends() do {} while (0)
-#define smp_read_barrier_depends() do {} while (0)
-
-#define set_mb(var, value) do {var = value; wmb(); } while (0)
-
-#endif /* _ASM_SCORE_BARRIER_H */
#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
#define mb() __asm__ __volatile__ ("synco": : :"memory")
#define rmb() mb()
-#define wmb() __asm__ __volatile__ ("synco": : :"memory")
+#define wmb() mb()
#define ctrl_barrier() __icbi(PAGE_OFFSET)
-#define read_barrier_depends() do { } while(0)
#else
-#define mb() __asm__ __volatile__ ("": : :"memory")
-#define rmb() mb()
-#define wmb() __asm__ __volatile__ ("": : :"memory")
#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
-#define read_barrier_depends() do { } while(0)
-#endif
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
#endif
#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#include <asm-generic/barrier.h>
+
#endif /* __ASM_SH_BARRIER_H */
#ifndef __SPARC_BARRIER_H
#define __SPARC_BARRIER_H
-/* XXX Change this if we ever use a PSO mode kernel. */
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(__var, __value) do { __var = __value; mb(); } while(0)
-#define smp_mb() __asm__ __volatile__("":::"memory")
-#define smp_rmb() __asm__ __volatile__("":::"memory")
-#define smp_wmb() __asm__ __volatile__("":::"memory")
-#define smp_read_barrier_depends() do { } while(0)
+#include <asm/processor.h> /* for nop() */
+#include <asm-generic/barrier.h>
#endif /* !(__SPARC_BARRIER_H) */
#include <arch/spr_def.h>
#include <asm/timex.h>
-/*
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- */
-#define read_barrier_depends() do { } while (0)
-
#define __sync() __insn_mf()
#include <hv/syscall_public.h>
#define mb() fast_mb()
#define iob() fast_iob()
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#endif
-
-#define set_mb(var, value) \
- do { var = value; mb(); } while (0)
+#include <asm-generic/barrier.h>
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_TILE_BARRIER_H */
#define dsb() __asm__ __volatile__ ("" : : : "memory")
#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#define mb() barrier()
-#define rmb() barrier()
-#define wmb() barrier()
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define read_barrier_depends() do { } while (0)
-#define smp_read_barrier_depends() do { } while (0)
-
-#define set_mb(var, value) do { var = value; smp_mb(); } while (0)
+#include <asm-generic/barrier.h>
#endif /* __UNICORE_BARRIER_H__ */
#ifndef _XTENSA_SYSTEM_H
#define _XTENSA_SYSTEM_H
-#define smp_read_barrier_depends() do { } while(0)
-#define read_barrier_depends() do { } while(0)
-
#define mb() ({ __asm__ __volatile__("memw" : : : "memory"); })
#define rmb() barrier()
#define wmb() mb()
#ifdef CONFIG_SMP
#error smp_* not defined
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
#endif
-#define set_mb(var, value) do { var = value; mb(); } while (0)
+#include <asm-generic/barrier.h>
#endif /* _XTENSA_SYSTEM_H */
-/* Generic barrier definitions, based on MN10300 definitions.
+/*
+ * Generic barrier definitions, originally based on MN10300 definitions.
*
* It should be possible to use these on really simple architectures,
* but it serves more as a starting point for new ports.
#ifndef __ASSEMBLY__
-#define nop() asm volatile ("nop")
+#include <linux/compiler.h>
+
+#ifndef nop
+#define nop() asm volatile ("nop")
+#endif
/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
+ * Force strict CPU ordering. And yes, this is required on UP too when we're
+ * talking to devices.
*
- * This implementation only contains a compiler barrier.
+ * Fall back to compiler barriers if nothing better is provided.
*/
-#define mb() asm volatile ("": : :"memory")
+#ifndef mb
+#define mb() barrier()
+#endif
+
+#ifndef rmb
#define rmb() mb()
-#define wmb() asm volatile ("": : :"memory")
+#endif
+
+#ifndef wmb
+#define wmb() mb()
+#endif
+
+#ifndef read_barrier_depends
+#define read_barrier_depends() do { } while (0)
+#endif
#ifdef CONFIG_SMP
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
#endif
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
-#define read_barrier_depends() do {} while (0)
-#define smp_read_barrier_depends() do {} while (0)
+#ifndef set_mb
+#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
+#endif
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_GENERIC_BARRIER_H */
projects / ~andy / linux / commitdiff