Merge remote-tracking branch 'scott/next' into next

<<
This contains a fix for a chroma_defconfig build break that was
introduced by e6500 tablewalk support, and a device tree binding patch
that missed the previous pull request due to some last-minute polishing.
>>

diff --git a/Documentation/devicetree/bindings/clock/corenet-clock.txt b/Documentation/devicetree/bindings/clock/corenet-clock.txt
new file mode 100644 (file)
index 0000000..24711af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/corenet-clock.txt
@@ -0,0 +1,134 @@
+* Clock Block on Freescale CoreNet Platforms
+
+Freescale CoreNet chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a specific clock block compatible string
+       and a single chassis clock compatible string.
+       Clock block strings include, but not limited to, one of the:
+       * "fsl,p2041-clockgen"
+       * "fsl,p3041-clockgen"
+       * "fsl,p4080-clockgen"
+       * "fsl,p5020-clockgen"
+       * "fsl,p5040-clockgen"
+       * "fsl,t4240-clockgen"
+       * "fsl,b4420-clockgen"
+       * "fsl,b4860-clockgen"
+       Chassis clock strings include:
+       * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+       * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+       address space defined by its parent bus, and resource zero
+       represents the clock register set
+- clock-frequency: Input system clock frequency
+
+Recommended properties:
+- ranges: Allows valid translation between child's address space and
+       parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+       physical base addresses.  Must be present if the device has
+       sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+       the size of an address. Must be present if the device has
+       sub-nodes and set to 1 if present
+
+2. Clock Provider/Consumer Binding
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+       * "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+       * "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+       * "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+       * "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+       * "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+               It takes parent's clock-frequency as its clock.
+       * "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+               It takes parent's clock-frequency as its clock.
+- #clock-cells: From common clock binding. The number of cells in a
+       clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+       clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+       For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+       clock-specifier cell may take the following values:
+       * 0 - equal to the PLL frequency
+       * 1 - equal to the PLL frequency divided by 2
+       * 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+       output clocks
+- reg: Should be the offset and length of clock block base address.
+       The length should be 4.
+
+Example for clock block and clock provider:
+/ {
+       clockgen: global-utilities@e1000 {
+               compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+               ranges = <0x0 0xe1000 0x1000>;
+               clock-frequency = <133333333>;
+               reg = <0xe1000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               sysclk: sysclk {
+                       #clock-cells = <0>;
+                       compatible = "fsl,qoriq-sysclk-1.0";
+                       clock-output-names = "sysclk";
+               }
+
+               pll0: pll0@800 {
+                       #clock-cells = <1>;
+                       reg = <0x800 0x4>;
+                       compatible = "fsl,qoriq-core-pll-1.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll0", "pll0-div2";
+               };
+
+               pll1: pll1@820 {
+                       #clock-cells = <1>;
+                       reg = <0x820 0x4>;
+                       compatible = "fsl,qoriq-core-pll-1.0";
+                       clocks = <&sysclk>;
+                       clock-output-names = "pll1", "pll1-div2";
+               };
+
+               mux0: mux0@0 {
+                       #clock-cells = <0>;
+                       reg = <0x0 0x4>;
+                       compatible = "fsl,qoriq-core-mux-1.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+                       clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+                       clock-output-names = "cmux0";
+               };
+
+               mux1: mux1@20 {
+                       #clock-cells = <0>;
+                       reg = <0x20 0x4>;
+                       compatible = "fsl,qoriq-core-mux-1.0";
+                       clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+                       clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+                       clock-output-names = "cmux1";
+               };
+       };
+  }
+
+Example for clock consumer:
+
+/ {
+       cpu0: PowerPC,e5500@0 {
+               ...
+               clocks = <&mux0>;
+               ...
+       };
+  }

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d15594ec213dc33cfd20baa7b01e3bd2bcec5654..a5e5d2ec380b3b2500a0743242caca1b4f0d14b7 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -532,6 +532,7 @@ config PPC_16K_PAGES
 
 config PPC_64K_PAGES
        bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
+       depends on !PPC_FSL_BOOK3E
        select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES

diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 16250b162375da69581f7c7d563ea8f6d2632c79..c95eb323e9ae5ac8e07feb28c024127266e405a8 100644 (file)
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -240,6 +240,7 @@ itlb_miss_fault_bolted:
        beq     tlb_miss_common_bolted
        b       itlb_miss_kernel_bolted
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
 /*
  * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
  *
@@ -409,7 +410,7 @@ itlb_miss_fault_e6500:
        TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
        tlb_epilog_bolted
        b       exc_instruction_storage_book3e
-
+#endif /* CONFIG_PPC_FSL_BOOK3E */
 
 /**********************************************************************
  *                                                                    *

diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 735839b74dc5a3d20cbf8eab97459f76e8b1d4aa..b37a58e1c92da8bfa9092828f6d3a92126da29d9 100644 (file)
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -557,10 +557,12 @@ static void setup_mmu_htw(void)
                patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
                patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
                break;
+#ifdef CONFIG_PPC_FSL_BOOK3E
        case PPC_HTW_E6500:
                patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
                patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
                break;
+#endif
        }
        pr_info("MMU: Book3E HW tablewalk %s\n",
                book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");