Merge with mainline to bring in sync changes to cyttsp4 driver.
--- /dev/null
+Input: sysrq reset sequence
+
+A simple binding to represent a set of keys as described in
+include/uapi/linux/input.h. This is to communicate a sequence of keys to the
+sysrq driver. Upon holding the keys for a specified amount of time (if
+specified) the system is sync'ed and reset.
+
+Key sequences are global to the system but all the keys in a set must be coming
+from the same input device.
+
+The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
+a set of keys.
+
+Required property:
+sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
+
+Optional property:
+timeout-ms: duration keys must be pressed together in milliseconds before
+generating a sysrq. If omitted the system is rebooted immediately when a valid
+sequence has been recognized.
+
+Example:
+
+ chosen {
+ linux,sysrq-reset-seq {
+ keyset = <0x03
+ 0x04
+ 0x0a>;
+ timeout-ms = <3000>;
+ };
+ };
+
+Would represent KEY_2, KEY_3 and KEY_9.
- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- wakeup-gpios: the gpio pin to be used for waking up the controller
- as well as uased as irq pin
+ and also used as irq pin
Example:
F: drivers/media/common/cypress_firmware*
CYTTSP TOUCHSCREEN DRIVER
-M: Javier Martinez Canillas <javier@dowhile0.org>
+M: Ferruh Yigit <fery@cypress.com>
L: linux-input@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/input/touchscreen/cyttsp*
F: include/linux/input/cyttsp.h
S: Maintained
F: drivers/platform/x86/ideapad-laptop.c
+IDEAPAD LAPTOP SLIDEBAR DRIVER
+M: Andrey Moiseev <o2g.org.ru@gmail.com>
+L: linux-input@vger.kernel.org
+W: https://github.com/o2genum/ideapad-slidebar
+S: Maintained
+F: drivers/input/misc/ideapad_slidebar.c
+
IDE/ATAPI DRIVERS
M: Borislav Petkov <bp@alien8.de>
L: linux-ide@vger.kernel.org
int irq;
int error;
- plat_data = client->dev.platform_data;
+ plat_data = dev_get_platdata(&client->dev);
if (!plat_data)
return -EINVAL;
if (irq < 0) {
dev_err(&client->dev,
"Failed to get irq number for button gpio\n");
+ error = irq;
goto err_free_button_gpio;
}
static int dc_pad_open(struct input_dev *dev)
{
- struct dc_pad *pad = dev->dev.platform_data;
+ struct dc_pad *pad = dev_get_platdata(&dev->dev);
maple_getcond_callback(pad->mdev, dc_pad_callback, HZ/20,
MAPLE_FUNC_CONTROLLER);
static void dc_pad_close(struct input_dev *dev)
{
- struct dc_pad *pad = dev->dev.platform_data;
+ struct dc_pad *pad = dev_get_platdata(&dev->dev);
maple_getcond_callback(pad->mdev, dc_pad_callback, 0,
MAPLE_FUNC_CONTROLLER);
return -EINVAL;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "no I/O memory defined in platform data\n");
- return -EINVAL;
- }
-
input_dev = devm_input_allocate_device(&pdev->dev);
if (!input_dev) {
dev_err(&pdev->dev, "failed to allocate the input device\n");
setup_timer(&keypad->check_matrix_timer,
imx_keypad_check_for_events, (unsigned long) keypad);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad->mmio_base))
return PTR_ERR(keypad->mmio_base);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int max7359_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return -EINVAL;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "missing platform resources\n");
- return -EINVAL;
- }
-
keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad),
GFP_KERNEL);
if (!keypad) {
return PTR_ERR(keypad->clk);
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad->reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad->reg_base))
return PTR_ERR(keypad->reg_base);
#define OMAP4_KBD_FULLCODE63_32 0x48
/* OMAP4 bit definitions */
-#define OMAP4_DEF_IRQENABLE_EVENTEN (1 << 0)
-#define OMAP4_DEF_IRQENABLE_LONGKEY (1 << 1)
-#define OMAP4_DEF_IRQENABLE_TIMEOUTEN (1 << 2)
-#define OMAP4_DEF_WUP_EVENT_ENA (1 << 0)
-#define OMAP4_DEF_WUP_LONG_KEY_ENA (1 << 1)
-#define OMAP4_DEF_CTRL_NOSOFTMODE (1 << 1)
-#define OMAP4_DEF_CTRLPTVVALUE (1 << 2)
-#define OMAP4_DEF_CTRLPTV (1 << 1)
+#define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0)
+#define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1)
+#define OMAP4_DEF_WUP_EVENT_ENA BIT(0)
+#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1)
+#define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1)
+#define OMAP4_DEF_CTRL_PTV_SHIFT 2
/* OMAP4 values */
-#define OMAP4_VAL_IRQDISABLE 0x00
-#define OMAP4_VAL_DEBOUNCINGTIME 0x07
-#define OMAP4_VAL_FUNCTIONALCFG 0x1E
-
-#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF
+#define OMAP4_VAL_IRQDISABLE 0x0
+#define OMAP4_VAL_DEBOUNCINGTIME 0x7
+#define OMAP4_VAL_PVT 0x7
enum {
KBD_REVISION_OMAP4 = 0,
struct input_dev *input;
void __iomem *base;
+ bool irq_wake_enabled;
unsigned int irq;
unsigned int rows;
}
-/* Interrupt handler */
-static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
+/* Interrupt handlers */
+static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
+{
+ struct omap4_keypad *keypad_data = dev_id;
+
+ if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
+ /* Disable interrupts */
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_VAL_IRQDISABLE);
+ return IRQ_WAKE_THREAD;
+ }
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
struct input_dev *input_dev = keypad_data->input;
unsigned int col, row, code, changed;
u32 *new_state = (u32 *) key_state;
- /* Disable interrupts */
- kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
- OMAP4_VAL_IRQDISABLE);
-
*new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
*(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
disable_irq(keypad_data->irq);
kbd_writel(keypad_data, OMAP4_KBD_CTRL,
- OMAP4_VAL_FUNCTIONALCFG);
+ OMAP4_DEF_CTRL_NOSOFTMODE |
+ (OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
OMAP4_VAL_DEBOUNCINGTIME);
+ /* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
- OMAP4_VAL_IRQDISABLE);
+ kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_DEF_IRQENABLE_EVENTEN |
OMAP4_DEF_IRQENABLE_LONGKEY);
goto err_free_keymap;
}
- error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
- IRQF_TRIGGER_RISING,
- "omap4-keypad", keypad_data);
+ error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
+ omap4_keypad_irq_thread_fn, 0,
+ "omap4-keypad", keypad_data);
if (error) {
dev_err(&pdev->dev, "failed to register interrupt\n");
goto err_free_input;
}
+ device_init_wakeup(&pdev->dev, true);
pm_runtime_put_sync(&pdev->dev);
error = input_register_device(keypad_data->input);
err_pm_disable:
pm_runtime_disable(&pdev->dev);
+ device_init_wakeup(&pdev->dev, false);
free_irq(keypad_data->irq, keypad_data);
err_free_keymap:
kfree(keypad_data->keymap);
pm_runtime_disable(&pdev->dev);
+ device_init_wakeup(&pdev->dev, false);
+
input_unregister_device(keypad_data->input);
iounmap(keypad_data->base);
MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
#endif
+#ifdef CONFIG_PM_SLEEP
+static int omap4_keypad_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+ int error;
+
+ if (device_may_wakeup(&pdev->dev)) {
+ error = enable_irq_wake(keypad_data->irq);
+ if (!error)
+ keypad_data->irq_wake_enabled = true;
+ }
+
+ return 0;
+}
+
+static int omap4_keypad_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev) && keypad_data->irq_wake_enabled) {
+ disable_irq_wake(keypad_data->irq);
+ keypad_data->irq_wake_enabled = false;
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(omap4_keypad_pm_ops,
+ omap4_keypad_suspend, omap4_keypad_resume);
+
static struct platform_driver omap4_keypad_driver = {
.probe = omap4_keypad_probe,
.remove = omap4_keypad_remove,
.driver = {
.name = "omap4-keypad",
.owner = THIS_MODULE,
+ .pm = &omap4_keypad_pm_ops,
.of_match_table = of_match_ptr(omap_keypad_dt_match),
},
};
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int qt1070_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct qt1070_data *data = i2c_get_clientdata(client);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(data->irq);
+
+ return 0;
+}
+
+static int qt1070_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct qt1070_data *data = i2c_get_clientdata(client);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(data->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume);
+
static const struct i2c_device_id qt1070_id[] = {
{ "qt1070", 0 },
{ },
.driver = {
.name = "qt1070",
.owner = THIS_MODULE,
+ .pm = &qt1070_pm_ops,
},
.id_table = qt1070_id,
.probe = qt1070_probe,
int irq;
int error;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no keyboard resource defined\n");
- return -EBUSY;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "not able to get irq for the device\n");
kbd->suspended_rate = pdata->suspended_rate;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
kbd->io_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(kbd->io_base))
return PTR_ERR(kbd->io_base);
if (!tegra_kbc_check_pin_cfg(kbc, &num_rows))
return -EINVAL;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
-
kbc->irq = platform_get_irq(pdev, 0);
if (kbc->irq < 0) {
dev_err(&pdev->dev, "failed to get keyboard IRQ\n");
setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
kbc->mmio = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(kbc->mmio))
return PTR_ERR(kbc->mmio);
If unsure, say N.
+config INPUT_IDEAPAD_SLIDEBAR
+ tristate "IdeaPad Laptop Slidebar"
+ depends on INPUT
+ depends on SERIO_I8042
+ help
+ Say Y here if you have an IdeaPad laptop with a slidebar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ideapad_slidebar.
+
endif
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
err_free_mem:
input_free_polled_device(poll_dev);
kfree(bdev);
- dev_set_drvdata(&pdev->dev, NULL);
return error;
}
input_free_polled_device(bdev->poll_dev);
iounmap(bdev->reg);
kfree(bdev);
- dev_set_drvdata(dev, NULL);
return 0;
}
--- /dev/null
+/*
+ * Input driver for slidebars on some Lenovo IdeaPad laptops
+ *
+ * Copyright (C) 2013 Andrey Moiseev <o2g.org.ru@gmail.com>
+ *
+ * Reverse-engineered from Lenovo SlideNav software (SBarHook.dll).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+/*
+ * Currently tested and works on:
+ * Lenovo IdeaPad Y550
+ * Lenovo IdeaPad Y550P
+ *
+ * Other models can be added easily. To test,
+ * load with 'force' parameter set 'true'.
+ *
+ * LEDs blinking and input mode are managed via sysfs,
+ * (hex, unsigned byte value):
+ * /sys/devices/platform/ideapad_slidebar/slidebar_mode
+ *
+ * The value is in byte range, however, I only figured out
+ * how bits 0b10011001 work. Some other bits, probably,
+ * are meaningfull too.
+ *
+ * Possible states:
+ *
+ * STD_INT, ONMOV_INT, OFF_INT, LAST_POLL, OFF_POLL
+ *
+ * Meaning:
+ * released touched
+ * STD 'heartbeat' lights follow the finger
+ * ONMOV no lights lights follow the finger
+ * LAST at last pos lights follow the finger
+ * OFF no lights no lights
+ *
+ * INT all input events are generated, interrupts are used
+ * POLL no input events by default, to get them,
+ * send 0b10000000 (read below)
+ *
+ * Commands: write
+ *
+ * All | 0b01001 -> STD_INT
+ * possible | 0b10001 -> ONMOV_INT
+ * states | 0b01000 -> OFF_INT
+ *
+ * | 0b0 -> LAST_POLL
+ * STD_INT or ONMOV_INT |
+ * | 0b1 -> STD_INT
+ *
+ * | 0b0 -> OFF_POLL
+ * OFF_INT or OFF_POLL |
+ * | 0b1 -> OFF_INT
+ *
+ * Any state | 0b10000000 -> if the slidebar has updated data,
+ * produce one input event (last position),
+ * switch to respective POLL mode
+ * (like 0x0), if not in POLL mode yet.
+ *
+ * Get current state: read
+ *
+ * masked by 0x11 read value means:
+ *
+ * 0x00 LAST
+ * 0x01 STD
+ * 0x10 OFF
+ * 0x11 ONMOV
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/dmi.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/i8042.h>
+#include <linux/serio.h>
+
+#define IDEAPAD_BASE 0xff29
+
+static bool force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
+
+static DEFINE_SPINLOCK(io_lock);
+
+static struct input_dev *slidebar_input_dev;
+static struct platform_device *slidebar_platform_dev;
+
+static u8 slidebar_pos_get(void)
+{
+ u8 res;
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_lock, flags);
+ outb(0xf4, 0xff29);
+ outb(0xbf, 0xff2a);
+ res = inb(0xff2b);
+ spin_unlock_irqrestore(&io_lock, flags);
+
+ return res;
+}
+
+static u8 slidebar_mode_get(void)
+{
+ u8 res;
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_lock, flags);
+ outb(0xf7, 0xff29);
+ outb(0x8b, 0xff2a);
+ res = inb(0xff2b);
+ spin_unlock_irqrestore(&io_lock, flags);
+
+ return res;
+}
+
+static void slidebar_mode_set(u8 mode)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&io_lock, flags);
+ outb(0xf7, 0xff29);
+ outb(0x8b, 0xff2a);
+ outb(mode, 0xff2b);
+ spin_unlock_irqrestore(&io_lock, flags);
+}
+
+static bool slidebar_i8042_filter(unsigned char data, unsigned char str,
+ struct serio *port)
+{
+ static bool extended = false;
+
+ /* We are only interested in data coming form KBC port */
+ if (str & I8042_STR_AUXDATA)
+ return false;
+
+ /* Scancodes: e03b on move, e0bb on release. */
+ if (data == 0xe0) {
+ extended = true;
+ return true;
+ }
+
+ if (!extended)
+ return false;
+
+ extended = false;
+
+ if (likely((data & 0x7f) != 0x3b)) {
+ serio_interrupt(port, 0xe0, 0);
+ return false;
+ }
+
+ if (data & 0x80) {
+ input_report_key(slidebar_input_dev, BTN_TOUCH, 0);
+ } else {
+ input_report_key(slidebar_input_dev, BTN_TOUCH, 1);
+ input_report_abs(slidebar_input_dev, ABS_X, slidebar_pos_get());
+ }
+ input_sync(slidebar_input_dev);
+
+ return true;
+}
+
+static ssize_t show_slidebar_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%x\n", slidebar_mode_get());
+}
+
+static ssize_t store_slidebar_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u8 mode;
+ int error;
+
+ error = kstrtou8(buf, 0, &mode);
+ if (error)
+ return error;
+
+ slidebar_mode_set(mode);
+
+ return count;
+}
+
+static DEVICE_ATTR(slidebar_mode, S_IWUSR | S_IRUGO,
+ show_slidebar_mode, store_slidebar_mode);
+
+static struct attribute *ideapad_attrs[] = {
+ &dev_attr_slidebar_mode.attr,
+ NULL
+};
+
+static struct attribute_group ideapad_attr_group = {
+ .attrs = ideapad_attrs
+};
+
+static const struct attribute_group *ideapad_attr_groups[] = {
+ &ideapad_attr_group,
+ NULL
+};
+
+static int __init ideapad_probe(struct platform_device* pdev)
+{
+ int err;
+
+ if (!request_region(IDEAPAD_BASE, 3, "ideapad_slidebar")) {
+ dev_err(&pdev->dev, "IO ports are busy\n");
+ return -EBUSY;
+ }
+
+ slidebar_input_dev = input_allocate_device();
+ if (!slidebar_input_dev) {
+ dev_err(&pdev->dev, "Failed to allocate input device\n");
+ err = -ENOMEM;
+ goto err_release_ports;
+ }
+
+ slidebar_input_dev->name = "IdeaPad Slidebar";
+ slidebar_input_dev->id.bustype = BUS_HOST;
+ slidebar_input_dev->dev.parent = &pdev->dev;
+ input_set_capability(slidebar_input_dev, EV_KEY, BTN_TOUCH);
+ input_set_capability(slidebar_input_dev, EV_ABS, ABS_X);
+ input_set_abs_params(slidebar_input_dev, ABS_X, 0, 0xff, 0, 0);
+
+ err = i8042_install_filter(slidebar_i8042_filter);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to install i8042 filter: %d\n", err);
+ goto err_free_dev;
+ }
+
+ err = input_register_device(slidebar_input_dev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Failed to register input device: %d\n", err);
+ goto err_remove_filter;
+ }
+
+ return 0;
+
+err_remove_filter:
+ i8042_remove_filter(slidebar_i8042_filter);
+err_free_dev:
+ input_free_device(slidebar_input_dev);
+err_release_ports:
+ release_region(IDEAPAD_BASE, 3);
+ return err;
+}
+
+static int ideapad_remove(struct platform_device *pdev)
+{
+ i8042_remove_filter(slidebar_i8042_filter);
+ input_unregister_device(slidebar_input_dev);
+ release_region(IDEAPAD_BASE, 3);
+
+ return 0;
+}
+
+static struct platform_driver slidebar_drv = {
+ .driver = {
+ .name = "ideapad_slidebar",
+ .owner = THIS_MODULE,
+ },
+ .remove = ideapad_remove,
+};
+
+static int __init ideapad_dmi_check(const struct dmi_system_id *id)
+{
+ pr_info("Laptop model '%s'\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id ideapad_dmi[] __initconst = {
+ {
+ .ident = "Lenovo IdeaPad Y550",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20017"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550")
+ },
+ .callback = ideapad_dmi_check
+ },
+ {
+ .ident = "Lenovo IdeaPad Y550P",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "20035"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550P")
+ },
+ .callback = ideapad_dmi_check
+ },
+ { NULL, }
+};
+MODULE_DEVICE_TABLE(dmi, ideapad_dmi);
+
+static int __init slidebar_init(void)
+{
+ int err;
+
+ if (!force && !dmi_check_system(ideapad_dmi)) {
+ pr_err("DMI does not match\n");
+ return -ENODEV;
+ }
+
+ slidebar_platform_dev = platform_device_alloc("ideapad_slidebar", -1);
+ if (!slidebar_platform_dev) {
+ pr_err("Not enough memory\n");
+ return -ENOMEM;
+ }
+
+ slidebar_platform_dev->dev.groups = ideapad_attr_groups;
+
+ err = platform_device_add(slidebar_platform_dev);
+ if (err) {
+ pr_err("Failed to register platform device\n");
+ goto err_free_dev;
+ }
+
+ err = platform_driver_probe(&slidebar_drv, ideapad_probe);
+ if (err) {
+ pr_err("Failed to register platform driver\n");
+ goto err_delete_dev;
+ }
+
+ return 0;
+
+err_delete_dev:
+ platform_device_del(slidebar_platform_dev);
+err_free_dev:
+ platform_device_put(slidebar_platform_dev);
+ return err;
+}
+
+static void __exit slidebar_exit(void)
+{
+ platform_device_unregister(slidebar_platform_dev);
+ platform_driver_unregister(&slidebar_drv);
+}
+
+module_init(slidebar_init);
+module_exit(slidebar_exit);
+
+MODULE_AUTHOR("Andrey Moiseev <o2g.org.ru@gmail.com>");
+MODULE_DESCRIPTION("Slidebar input support for some Lenovo IdeaPad laptops");
+MODULE_LICENSE("GPL");
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int pwm_beeper_suspend(struct device *dev)
{
struct pwm_beeper *beeper = dev_get_drvdata(dev);
input_unregister_polled_device(poll_dev);
input_free_polled_device(poll_dev);
- dev_set_drvdata(&pdev->dev, NULL);
return 0;
}
static int twl6040_vibra_probe(struct platform_device *pdev)
{
- struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
struct device *twl6040_core_dev = pdev->dev.parent;
struct device_node *twl6040_core_node = NULL;
struct vibra_info *info;
"vibra");
#endif
- if (!pdata && !twl6040_core_node) {
- dev_err(&pdev->dev, "platform_data not available\n");
+ if (!twl6040_core_node) {
+ dev_err(&pdev->dev, "parent of node is missing?\n");
return -EINVAL;
}
info->dev = &pdev->dev;
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
- if (pdata) {
- info->vibldrv_res = pdata->vibldrv_res;
- info->vibrdrv_res = pdata->vibrdrv_res;
- info->viblmotor_res = pdata->viblmotor_res;
- info->vibrmotor_res = pdata->vibrmotor_res;
- vddvibl_uV = pdata->vddvibl_uV;
- vddvibr_uV = pdata->vddvibr_uV;
- } else {
- of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
- &info->vibldrv_res);
- of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
- &info->vibrdrv_res);
- of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
- &info->viblmotor_res);
- of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
- &info->vibrmotor_res);
- of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV",
- &vddvibl_uV);
- of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV",
- &vddvibr_uV);
- }
+
+ of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
+ &info->vibldrv_res);
+ of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
+ &info->vibrdrv_res);
+ of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
+ &info->viblmotor_res);
+ of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
+ &info->vibrmotor_res);
+ of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
+ of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
* When booted with Device tree the regulators are attached to the
* parent device (twl6040 MFD core)
*/
- ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
- ARRAY_SIZE(info->supplies), info->supplies);
+ ret = regulator_bulk_get(twl6040_core_dev, ARRAY_SIZE(info->supplies),
+ info->supplies);
if (ret) {
dev_err(info->dev, "couldn't get regulators %d\n", ret);
return ret;
MODULE_AUTHOR("Miloslav Trmac <mitr@volny.cz>");
MODULE_DESCRIPTION("Wistron laptop button driver");
MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.3");
static bool force; /* = 0; */
module_param(force, bool, 0);
{ KE_KEY, 0x36, {KEY_WWW} },
{ KE_WIFI, 0x30 },
{ KE_BLUETOOTH, 0x44 },
- { KE_END, FE_UNTESTED }
+ { KE_END, 0 }
};
static struct key_entry keymap_wistron_generic[] __initdata = {
* a list of buttons and their key codes (reported when loading this module
* with force=1) and the output of dmidecode to $MODULE_AUTHOR.
*/
-static const struct dmi_system_id __initconst dmi_ids[] = {
+static const struct dmi_system_id dmi_ids[] __initconst = {
{
/* Fujitsu-Siemens Amilo Pro V2000 */
.callback = dmi_matched,
},
{ NULL, }
};
+MODULE_DEVICE_TABLE(dmi, dmi_ids);
/* Copy the good keymap, as the original ones are free'd */
static int __init copy_keymap(void)
{
struct cytp_data *cytp;
- cytp = (struct cytp_data *)kzalloc(sizeof(struct cytp_data), GFP_KERNEL);
+ cytp = kzalloc(sizeof(struct cytp_data), GFP_KERNEL);
psmouse->private = (void *)cytp;
if (cytp == NULL)
return -ENOMEM;
return 1;
}
-static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
+static const struct dmi_system_id lifebook_dmi_table[] __initconst = {
{
/* FLORA-ie 55mi */
.matches = {
static bool impaired_toshiba_kbc;
-static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
+static const struct dmi_system_id toshiba_dmi_table[] __initconst = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
/* Toshiba Satellite */
static bool broken_olpc_ec;
-static const struct dmi_system_id __initconst olpc_dmi_table[] = {
+static const struct dmi_system_id olpc_dmi_table[] __initconst = {
#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
{
/* OLPC XO-1 or XO-1.5 */
int irq;
int error, id, i;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no IO memory defined\n");
- return -EINVAL;
- }
-
irq = platform_get_irq_byname(pdev, "arc_ps2_irq");
if (irq < 0) {
dev_err(&pdev->dev, "no IRQ defined\n");
return -ENOMEM;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
arc_ps2->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(arc_ps2->addr))
return PTR_ERR(arc_ps2->addr);
#define I8042_CTL_TIMEOUT 10000
-/*
- * Status register bits.
- */
-
-#define I8042_STR_PARITY 0x80
-#define I8042_STR_TIMEOUT 0x40
-#define I8042_STR_AUXDATA 0x20
-#define I8042_STR_KEYLOCK 0x10
-#define I8042_STR_CMDDAT 0x08
-#define I8042_STR_MUXERR 0x04
-#define I8042_STR_IBF 0x02
-#define I8042_STR_OBF 0x01
-
-/*
- * Control register bits.
- */
-
-#define I8042_CTR_KBDINT 0x01
-#define I8042_CTR_AUXINT 0x02
-#define I8042_CTR_IGNKEYLOCK 0x08
-#define I8042_CTR_KBDDIS 0x10
-#define I8042_CTR_AUXDIS 0x20
-#define I8042_CTR_XLATE 0x40
-
/*
* Return codes.
*/
np = pdev->dev.of_node;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENOENT;
-
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base)) {
dev_err(&pdev->dev, "Failed to map WTM registers\n");
return logical_extents / physical_extents;
}
-/*
- * The physical dimension specified by the HID descriptor is likely not in
- * the "100th of a mm" units expected by wacom_calculate_touch_res. This
- * function adjusts the value of [xy]_phy based on the unit and exponent
- * provided by the HID descriptor. If an error occurs durring conversion
- * (e.g. from the unit being left unspecified) [xy]_phy is not modified.
- */
-static void wacom_fix_phy_from_hid(struct wacom_features *features)
-{
- int xres = wacom_calc_hid_res(features->x_max, features->x_phy,
- features->unit, features->unitExpo);
- int yres = wacom_calc_hid_res(features->y_max, features->y_phy,
- features->unit, features->unitExpo);
-
- if (xres > 0 && yres > 0) {
- features->x_phy = (100 * features->x_max) / xres;
- features->y_phy = (100 * features->y_max) / yres;
- }
-}
-
-/*
- * Static values for max X/Y and resolution of Pen interface is stored in
- * features. This mean physical size of active area can be computed.
- * This is useful to do when Pen and Touch have same active area of tablet.
- * This means for Touch device, we only need to find max X/Y value and we
- * have enough information to compute resolution of touch.
- */
-static void wacom_set_phy_from_res(struct wacom_features *features)
-{
- features->x_phy = (features->x_max * 100) / features->x_resolution;
- features->y_phy = (features->y_max * 100) / features->y_resolution;
-}
-
static int wacom_parse_logical_collection(unsigned char *report,
struct wacom_features *features)
{
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
features->device_type = BTN_TOOL_FINGER;
- wacom_set_phy_from_res(features);
-
features->x_max = features->y_max =
get_unaligned_le16(&report[10]);
}
}
error = wacom_parse_hid(intf, hid_desc, features);
- if (error)
- goto out;
- wacom_fix_phy_from_hid(features);
out:
return error;
*((struct wacom_features *)id->driver_info);
wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
wacom_wac2->features.device_type = BTN_TOOL_FINGER;
- wacom_set_phy_from_res(&wacom_wac2->features);
wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
error = wacom_register_input(wacom2);
if (error)
return;
}
+/*
+ * Not all devices report physical dimensions from HID.
+ * Compute the default from hardcoded logical dimension
+ * and resolution before driver overwrites them.
+ */
+static void wacom_set_default_phy(struct wacom_features *features)
+{
+ if (features->x_resolution) {
+ features->x_phy = (features->x_max * 100) /
+ features->x_resolution;
+ features->y_phy = (features->y_max * 100) /
+ features->y_resolution;
+ }
+}
+
+static void wacom_calculate_res(struct wacom_features *features)
+{
+ features->x_resolution = wacom_calc_hid_res(features->x_max,
+ features->x_phy,
+ features->unit,
+ features->unitExpo);
+ features->y_resolution = wacom_calc_hid_res(features->y_max,
+ features->y_phy,
+ features->unit,
+ features->unitExpo);
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ /* set the default size in case we do not get them from hid */
+ wacom_set_default_phy(features);
+
/* Retrieve the physical and logical size for touch devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
- wacom_set_phy_from_res(features);
-
features->x_max = 4096;
features->y_max = 4096;
} else {
wacom_setup_device_quirks(features);
+ /* set unit to "100th of a mm" for devices not reported by HID */
+ if (!features->unit) {
+ features->unit = 0x11;
+ features->unitExpo = 16 - 3;
+ }
+ wacom_calculate_res(features);
+
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
" Pen" : " Finger",
sizeof(wacom_wac->name));
-
other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
other_dev = dev;
usb_set_intfdata(intf, wacom);
if (features->quirks & WACOM_QUIRK_MONITOR) {
- if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+ if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
+ error = -EIO;
goto fail5;
+ }
}
return 0;
wacom_query_tablet_data(intf, features);
wacom_led_control(wacom);
- if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR)
- && usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
+ if ((wacom->open || (features->quirks & WACOM_QUIRK_MONITOR)) &&
+ usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
rv = -EIO;
mutex_unlock(&wacom->lock);
}
}
-static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
- unsigned int physical_max)
-{
- /* Touch physical dimensions are in 100th of mm */
- return (logical_max * 100) / physical_max;
-}
-
static void wacom_abs_set_axis(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
input_set_abs_params(input_dev, ABS_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_X,
- wacom_calculate_touch_res(features->x_max,
- features->x_phy));
+ features->x_resolution);
input_abs_set_res(input_dev, ABS_Y,
- wacom_calculate_touch_res(features->y_max,
- features->y_phy));
+ features->y_resolution);
}
if (features->touch_max > 1) {
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
- wacom_calculate_touch_res(features->x_max,
- features->x_phy));
+ features->x_resolution);
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
- wacom_calculate_touch_res(features->y_max,
- features->y_phy));
+ features->y_resolution);
}
}
}
return err;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int cy8ctmg110_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
}
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);
-#endif
static int cy8ctmg110_remove(struct i2c_client *client)
{
.driver = {
.owner = THIS_MODULE,
.name = CY8CTMG110_DRIVER_NAME,
-#ifdef CONFIG_PM
.pm = &cy8ctmg110_pm,
-#endif
},
.id_table = cy8ctmg110_idtable,
.probe = cy8ctmg110_probe,
dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
- if (!cd)
- return;
-
if (!work_pending(&cd->watchdog_work))
schedule_work(&cd->watchdog_work);
return rc;
}
-static int cyttsp4_core_sleep(struct cyttsp4 *cd)
-{
- int rc;
-
- rc = cyttsp4_request_exclusive(cd, cd->dev,
- CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
- if (rc < 0) {
- dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
- __func__, cd->exclusive_dev, cd->dev);
- return 0;
- }
-
- rc = cyttsp4_core_sleep_(cd);
-
- if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
- dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
- else
- dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
-
- return rc;
-}
-
-static int cyttsp4_core_wake_(struct cyttsp4 *cd)
-{
- struct device *dev = cd->dev;
- int rc;
- u8 mode;
- int t;
-
- /* Already woken? */
- mutex_lock(&cd->system_lock);
- if (cd->sleep_state == SS_SLEEP_OFF) {
- mutex_unlock(&cd->system_lock);
- return 0;
- }
- cd->int_status &= ~CY_INT_IGNORE;
- cd->int_status |= CY_INT_AWAKE;
- cd->sleep_state = SS_WAKING;
-
- if (cd->cpdata->power) {
- dev_dbg(dev, "%s: Power up HW\n", __func__);
- rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
- } else {
- dev_dbg(dev, "%s: No power function\n", __func__);
- rc = -ENOSYS;
- }
- if (rc < 0) {
- dev_err(dev, "%s: HW Power up fails r=%d\n",
- __func__, rc);
-
- /* Initiate a read transaction to wake up */
- cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
- } else
- dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
- __func__);
- mutex_unlock(&cd->system_lock);
-
- t = wait_event_timeout(cd->wait_q,
- (cd->int_status & CY_INT_AWAKE) == 0,
- msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
- if (IS_TMO(t)) {
- dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
- mutex_lock(&cd->system_lock);
- cd->int_status &= ~CY_INT_AWAKE;
- /* Try starting up */
- cyttsp4_queue_startup_(cd);
- mutex_unlock(&cd->system_lock);
- }
-
- mutex_lock(&cd->system_lock);
- cd->sleep_state = SS_SLEEP_OFF;
- mutex_unlock(&cd->system_lock);
-
- cyttsp4_start_wd_timer(cd);
-
- return 0;
-}
-
-static int cyttsp4_core_wake(struct cyttsp4 *cd)
-{
- int rc;
-
- rc = cyttsp4_request_exclusive(cd, cd->dev,
- CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
- if (rc < 0) {
- dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
- __func__, cd->exclusive_dev, cd->dev);
- return 0;
- }
-
- rc = cyttsp4_core_wake_(cd);
-
- if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
- dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
- else
- dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
-
- return rc;
-}
-
static int cyttsp4_startup_(struct cyttsp4 *cd)
{
int retry = CY_CORE_STARTUP_RETRY_COUNT;
}
#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
+static int cyttsp4_core_sleep(struct cyttsp4 *cd)
+{
+ int rc;
+
+ rc = cyttsp4_request_exclusive(cd, cd->dev,
+ CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
+ if (rc < 0) {
+ dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+ __func__, cd->exclusive_dev, cd->dev);
+ return 0;
+ }
+
+ rc = cyttsp4_core_sleep_(cd);
+
+ if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+ dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+ else
+ dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+ return rc;
+}
+
+static int cyttsp4_core_wake_(struct cyttsp4 *cd)
+{
+ struct device *dev = cd->dev;
+ int rc;
+ u8 mode;
+ int t;
+
+ /* Already woken? */
+ mutex_lock(&cd->system_lock);
+ if (cd->sleep_state == SS_SLEEP_OFF) {
+ mutex_unlock(&cd->system_lock);
+ return 0;
+ }
+ cd->int_status &= ~CY_INT_IGNORE;
+ cd->int_status |= CY_INT_AWAKE;
+ cd->sleep_state = SS_WAKING;
+
+ if (cd->cpdata->power) {
+ dev_dbg(dev, "%s: Power up HW\n", __func__);
+ rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
+ } else {
+ dev_dbg(dev, "%s: No power function\n", __func__);
+ rc = -ENOSYS;
+ }
+ if (rc < 0) {
+ dev_err(dev, "%s: HW Power up fails r=%d\n",
+ __func__, rc);
+
+ /* Initiate a read transaction to wake up */
+ cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+ } else
+ dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
+ __func__);
+ mutex_unlock(&cd->system_lock);
+
+ t = wait_event_timeout(cd->wait_q,
+ (cd->int_status & CY_INT_AWAKE) == 0,
+ msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
+ if (IS_TMO(t)) {
+ dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
+ mutex_lock(&cd->system_lock);
+ cd->int_status &= ~CY_INT_AWAKE;
+ /* Try starting up */
+ cyttsp4_queue_startup_(cd);
+ mutex_unlock(&cd->system_lock);
+ }
+
+ mutex_lock(&cd->system_lock);
+ cd->sleep_state = SS_SLEEP_OFF;
+ mutex_unlock(&cd->system_lock);
+
+ cyttsp4_start_wd_timer(cd);
+
+ return 0;
+}
+
+static int cyttsp4_core_wake(struct cyttsp4 *cd)
+{
+ int rc;
+
+ rc = cyttsp4_request_exclusive(cd, cd->dev,
+ CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
+ if (rc < 0) {
+ dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+ __func__, cd->exclusive_dev, cd->dev);
+ return 0;
+ }
+
+ rc = cyttsp4_core_wake_(cd);
+
+ if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+ dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+ else
+ dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+ return rc;
+}
+
static int cyttsp4_core_suspend(struct device *dev)
{
struct cyttsp4 *cd = dev_get_drvdata(dev);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int eeti_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);
-#endif
static const struct i2c_device_id eeti_ts_id[] = {
{ "eeti_ts", 0 },
static struct i2c_driver eeti_ts_driver = {
.driver = {
.name = "eeti_ts",
-#ifdef CONFIG_PM
.pm = &eeti_ts_pm,
-#endif
},
.probe = eeti_ts_probe,
.remove = eeti_ts_remove,
release_region(HTCPEN_PORT_INIT, 1);
release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
- dev_set_drvdata(dev, NULL);
-
return 0;
}
}
};
-static struct dmi_system_id __initdata htcshift_dmi_table[] = {
+static struct dmi_system_id htcshift_dmi_table[] __initdata = {
{
.ident = "Shift",
.matches = {
struct input_dev *input_dev;
int error;
- data = kzalloc(sizeof(struct max11801_data), GFP_KERNEL);
- input_dev = input_allocate_device();
+ data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+ input_dev = devm_input_allocate_device(&client->dev);
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
- error = -ENOMEM;
- goto err_free_mem;
+ return -ENOMEM;
}
data->client = client;
max11801_ts_phy_init(data);
- error = request_threaded_irq(client->irq, NULL, max11801_ts_interrupt,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "max11801_ts", data);
+ error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ max11801_ts_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "max11801_ts", data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
- goto err_free_mem;
+ return error;
}
error = input_register_device(data->input_dev);
if (error)
- goto err_free_irq;
+ return error;
i2c_set_clientdata(client, data);
return 0;
-
-err_free_irq:
- free_irq(client->irq, data);
-err_free_mem:
- input_free_device(input_dev);
- kfree(data);
- return error;
-}
-
-static int max11801_ts_remove(struct i2c_client *client)
-{
- struct max11801_data *data = i2c_get_clientdata(client);
-
- free_irq(client->irq, data);
- input_unregister_device(data->input_dev);
- kfree(data);
-
- return 0;
}
static const struct i2c_device_id max11801_ts_id[] = {
},
.id_table = max11801_ts_id,
.probe = max11801_ts_probe,
- .remove = max11801_ts_remove,
};
module_i2c_driver(max11801_ts_driver);
#include <linux/moduleparam.h>
#include <linux/jiffies.h>
#include <linux/syscalls.h>
+#include <linux/of.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
}
}
+#ifdef CONFIG_OF
+static void sysrq_of_get_keyreset_config(void)
+{
+ u32 key;
+ struct device_node *np;
+ struct property *prop;
+ const __be32 *p;
+
+ np = of_find_node_by_path("/chosen/linux,sysrq-reset-seq");
+ if (!np) {
+ pr_debug("No sysrq node found");
+ return;
+ }
+
+ /* Reset in case a __weak definition was present */
+ sysrq_reset_seq_len = 0;
+
+ of_property_for_each_u32(np, "keyset", prop, p, key) {
+ if (key == KEY_RESERVED || key > KEY_MAX ||
+ sysrq_reset_seq_len == SYSRQ_KEY_RESET_MAX)
+ break;
+
+ sysrq_reset_seq[sysrq_reset_seq_len++] = (unsigned short)key;
+ }
+
+ /* Get reset timeout if any. */
+ of_property_read_u32(np, "timeout-ms", &sysrq_reset_downtime_ms);
+}
+#else
+static void sysrq_of_get_keyreset_config(void)
+{
+}
+#endif
+
static void sysrq_reinject_alt_sysrq(struct work_struct *work)
{
struct sysrq_state *sysrq =
int error;
int i;
+ /* First check if a __weak interface was instantiated. */
for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
key = platform_sysrq_reset_seq[i];
if (key == KEY_RESERVED || key > KEY_MAX)
sysrq_reset_seq[sysrq_reset_seq_len++] = key;
}
+ /*
+ * DT configuration takes precedence over anything that would
+ * have been defined via the __weak interface.
+ */
+ sysrq_of_get_keyreset_config();
+
error = input_register_handler(&sysrq_handler);
if (error)
pr_err("Failed to register input handler, error %d", error);
#define I8042_CMD_MUX_PFX 0x0090
#define I8042_CMD_MUX_SEND 0x1090
+/*
+ * Status register bits.
+ */
+
+#define I8042_STR_PARITY 0x80
+#define I8042_STR_TIMEOUT 0x40
+#define I8042_STR_AUXDATA 0x20
+#define I8042_STR_KEYLOCK 0x10
+#define I8042_STR_CMDDAT 0x08
+#define I8042_STR_MUXERR 0x04
+#define I8042_STR_IBF 0x02
+#define I8042_STR_OBF 0x01
+
+/*
+ * Control register bits.
+ */
+
+#define I8042_CTR_KBDINT 0x01
+#define I8042_CTR_AUXINT 0x02
+#define I8042_CTR_IGNKEYLOCK 0x08
+#define I8042_CTR_KBDDIS 0x10
+#define I8042_CTR_AUXDIS 0x20
+#define I8042_CTR_XLATE 0x40
+
struct serio;
#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
#define SYN_CONFIG 1
#define SYN_MT_REPORT 2
#define SYN_DROPPED 3
+#define SYN_MAX 0xf
+#define SYN_CNT (SYN_MAX+1)
/*
* Keys and buttons
projects / ~andy / linux / commitdiff