kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
+ kirkwood-mv88f6281gtw-ge.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
--- /dev/null
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "Marvell 88F6281 GTW GE Board";
+ compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ ocp@f1000000 {
+ pinctrl@10000 {
+ pmx_usb_led: pmx-usb-led {
+ marvell,pins = "mpp12";
+ marvell,function = "gpo";
+ };
+
+ pmx_leds: pmx-leds {
+ marvell,pins = "mpp20", "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_keys: pmx-keys {
+ marvell,pins = "mpp46", "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ spi@10600 {
+ pinctrl-0 = <&pmx_spi>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+ };
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&pmx_uart0>;
+ pinctrl-names = "default";
+ clock-frequency = <200000000>;
+ status = "ok";
+ };
+
+ ehci@50000 {
+ status = "okay";
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+ pinctrl-names = "default";
+
+ green-status {
+ label = "gtw:green:Status";
+ gpios = <&gpio0 20 0>;
+ };
+
+ red-status {
+ label = "gtw:red:Status";
+ gpios = <&gpio0 21 0>;
+ };
+
+ green-usb {
+ label = "gtw:green:USB";
+ gpios = <&gpio0 12 0>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_keys>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "SWR Button";
+ linux,code = <0x198>; /* KEY_RESTART */
+ gpios = <&gpio1 15 1>;
+ };
+ button@2 {
+ label = "WPS Button";
+ linux,code = <0x211>; /* KEY_WPS_BUTTON */
+ gpios = <&gpio1 14 1>;
+ };
+ };
+};
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
-config MACH_MV88F6281GTW_GE
- bool "Marvell 88F6281 GTW GE Board"
- select KIRKWOOD_LEGACY
- help
- Say 'Y' here if you want your kernel to support the
- Marvell 88F6281 GTW GE Board.
-
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
select KIRKWOOD_LEGACY
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
+config MACH_MV88F6281GTW_GE_DT
+ bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell 88F6281 GTW GE Board (Flattened Device Tree).
+
endmenu
endif
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
+ if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
+ mv88f6281gtw_ge_init();
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[4] = "wan",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &mv88f6281gtw_ge_switch_chip_data,
+};
+
+void __init mv88f6281gtw_ge_init(void)
+{
+ kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+ kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+}
static inline void dnskw_init(void) {};
#endif
+#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
+void mv88f6281gtw_ge_init(void);
+#else
+static inline void mv88f6281gtw_ge_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
+++ /dev/null
-/*
- * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
- .port_names[0] = "lan1",
- .port_names[1] = "lan2",
- .port_names[2] = "lan3",
- .port_names[3] = "lan4",
- .port_names[4] = "wan",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
- .nr_chips = 1,
- .chip = &mv88f6281gtw_ge_switch_chip_data,
-};
-
-static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
- .type = "mx25l12805d",
-};
-
-static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &mv88f6281gtw_ge_spi_slave_data,
- .irq = -1,
- .max_speed_hz = 50000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
- {
- .code = KEY_RESTART,
- .gpio = 47,
- .desc = "SWR Button",
- .active_low = 1,
- }, {
- .code = KEY_WPS_BUTTON,
- .gpio = 46,
- .desc = "WPS Button",
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
- .buttons = mv88f6281gtw_ge_button_pins,
- .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_buttons = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &mv88f6281gtw_ge_button_data,
- },
-};
-
-static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
- {
- .name = "gtw:green:Status",
- .gpio = 20,
- .active_low = 0,
- }, {
- .name = "gtw:red:Status",
- .gpio = 21,
- .active_low = 0,
- }, {
- .name = "gtw:green:USB",
- .gpio = 12,
- .active_low = 0,
- },
-};
-
-static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
- .leds = mv88f6281gtw_ge_led_pins,
- .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &mv88f6281gtw_ge_led_data,
- },
-};
-
-static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
- MPP12_GPO, /* Status#_USB pin */
- MPP20_GPIO, /* Status#_GLED pin */
- MPP21_GPIO, /* Status#_RLED pin */
- MPP46_GPIO, /* WPS_Switch pin */
- MPP47_GPIO, /* SW_Init pin */
- 0
-};
-
-static void __init mv88f6281gtw_ge_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_init();
- kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
-
- kirkwood_ehci_init();
- kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
- kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
- spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
- ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
- kirkwood_spi_init();
- kirkwood_uart0_init();
- platform_device_register(&mv88f6281gtw_ge_leds);
- platform_device_register(&mv88f6281gtw_ge_buttons);
-}
-
-static int __init mv88f6281gtw_ge_pci_init(void)
-{
- if (machine_is_mv88f6281gtw_ge())
- kirkwood_pcie_init(KW_PCIE0);
-
- return 0;
-}
-subsys_initcall(mv88f6281gtw_ge_pci_init);
-
-MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
- /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .atag_offset = 0x100,
- .init_machine = mv88f6281gtw_ge_init,
- .map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
- .init_irq = kirkwood_init_irq,
- .init_time = kirkwood_timer_init,
- .restart = kirkwood_restart,
-MACHINE_END
projects / ~andy / linux / commitdiff