[~andy/linux] / kernel / time / timekeeping.c

/*
 *  linux/kernel/time/timekeeping.c
 *
 *  Kernel timekeeping code and accessor functions
 *
 *  This code was moved from linux/kernel/timer.c.
 *  Please see that file for copyright and history logs.
 *
 */

#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/syscore_ops.h>
#include <linux/clocksource.h>
#include <linux/jiffies.h>
#include <linux/time.h>
#include <linux/tick.h>
#include <linux/stop_machine.h>

/* Structure holding internal timekeeping values. */
struct timekeeper {
        /* Current clocksource used for timekeeping. */
        struct clocksource      *clock;
        /* NTP adjusted clock multiplier */
        u32                     mult;
        /* The shift value of the current clocksource. */
        u32                     shift;
        /* Number of clock cycles in one NTP interval. */
        cycle_t                 cycle_interval;
        /* Number of clock shifted nano seconds in one NTP interval. */
        u64                     xtime_interval;
        /* shifted nano seconds left over when rounding cycle_interval */
        s64                     xtime_remainder;
        /* Raw nano seconds accumulated per NTP interval. */
        u32                     raw_interval;

        /* Current CLOCK_REALTIME time in seconds */
        u64                     xtime_sec;
        /* Clock shifted nano seconds */
        u64                     xtime_nsec;

        /* Difference between accumulated time and NTP time in ntp
         * shifted nano seconds. */
        s64                     ntp_error;
        /* Shift conversion between clock shifted nano seconds and
         * ntp shifted nano seconds. */
        u32                     ntp_error_shift;

        /*
         * wall_to_monotonic is what we need to add to xtime (or xtime corrected
         * for sub jiffie times) to get to monotonic time.  Monotonic is pegged
         * at zero at system boot time, so wall_to_monotonic will be negative,
         * however, we will ALWAYS keep the tv_nsec part positive so we can use
         * the usual normalization.
         *
         * wall_to_monotonic is moved after resume from suspend for the
         * monotonic time not to jump. We need to add total_sleep_time to
         * wall_to_monotonic to get the real boot based time offset.
         *
         * - wall_to_monotonic is no longer the boot time, getboottime must be
         * used instead.
         */
        struct timespec         wall_to_monotonic;
        /* Offset clock monotonic -> clock realtime */
        ktime_t                 offs_real;
        /* time spent in suspend */
        struct timespec         total_sleep_time;
        /* Offset clock monotonic -> clock boottime */
        ktime_t                 offs_boot;
        /* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
        struct timespec         raw_time;
        /* Seqlock for all timekeeper values */
        seqlock_t               lock;
};

static struct timekeeper timekeeper;

/*
 * This read-write spinlock protects us from races in SMP while
 * playing with xtime.
 */
__cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);

/* flag for if timekeeping is suspended */
int __read_mostly timekeeping_suspended;

static inline void tk_normalize_xtime(struct timekeeper *tk)
{
        while (tk->xtime_nsec >= ((u64)NSEC_PER_SEC << tk->shift)) {
                tk->xtime_nsec -= (u64)NSEC_PER_SEC << tk->shift;
                tk->xtime_sec++;
        }
}

static struct timespec tk_xtime(struct timekeeper *tk)
{
        struct timespec ts;

        ts.tv_sec = tk->xtime_sec;
        ts.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
        return ts;
}

static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts)
{
        tk->xtime_sec = ts->tv_sec;
        tk->xtime_nsec = (u64)ts->tv_nsec << tk->shift;
}

static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts)
{
        tk->xtime_sec += ts->tv_sec;
        tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift;
        tk_normalize_xtime(tk);
}

static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm)
{
        struct timespec tmp;

        /*
         * Verify consistency of: offset_real = -wall_to_monotonic
         * before modifying anything
         */
        set_normalized_timespec(&tmp, -tk->wall_to_monotonic.tv_sec,
                                        -tk->wall_to_monotonic.tv_nsec);
        WARN_ON_ONCE(tk->offs_real.tv64 != timespec_to_ktime(tmp).tv64);
        tk->wall_to_monotonic = wtm;
        set_normalized_timespec(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
        tk->offs_real = timespec_to_ktime(tmp);
}

static void tk_set_sleep_time(struct timekeeper *tk, struct timespec t)
{
        /* Verify consistency before modifying */
        WARN_ON_ONCE(tk->offs_boot.tv64 != timespec_to_ktime(tk->total_sleep_time).tv64);

        tk->total_sleep_time    = t;
        tk->offs_boot           = timespec_to_ktime(t);
}

/**
 * timekeeper_setup_internals - Set up internals to use clocksource clock.
 *
 * @clock:              Pointer to clocksource.
 *
 * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
 * pair and interval request.
 *
 * Unless you're the timekeeping code, you should not be using this!
 */
static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
{
        cycle_t interval;
        u64 tmp, ntpinterval;
        struct clocksource *old_clock;

        old_clock = tk->clock;
        tk->clock = clock;
        clock->cycle_last = clock->read(clock);

        /* Do the ns -> cycle conversion first, using original mult */
        tmp = NTP_INTERVAL_LENGTH;
        tmp <<= clock->shift;
        ntpinterval = tmp;
        tmp += clock->mult/2;
        do_div(tmp, clock->mult);
        if (tmp == 0)
                tmp = 1;

        interval = (cycle_t) tmp;
        tk->cycle_interval = interval;

        /* Go back from cycles -> shifted ns */
        tk->xtime_interval = (u64) interval * clock->mult;
        tk->xtime_remainder = ntpinterval - tk->xtime_interval;
        tk->raw_interval =
                ((u64) interval * clock->mult) >> clock->shift;

         /* if changing clocks, convert xtime_nsec shift units */
        if (old_clock) {
                int shift_change = clock->shift - old_clock->shift;
                if (shift_change < 0)
                        tk->xtime_nsec >>= -shift_change;
                else
                        tk->xtime_nsec <<= shift_change;
        }
        tk->shift = clock->shift;

        tk->ntp_error = 0;
        tk->ntp_error_shift = NTP_SCALE_SHIFT - clock->shift;

        /*
         * The timekeeper keeps its own mult values for the currently
         * active clocksource. These value will be adjusted via NTP
         * to counteract clock drifting.
         */
        tk->mult = clock->mult;
}

/* Timekeeper helper functions. */
static inline s64 timekeeping_get_ns(struct timekeeper *tk)
{
        cycle_t cycle_now, cycle_delta;
        struct clocksource *clock;
        s64 nsec;

        /* read clocksource: */
        clock = tk->clock;
        cycle_now = clock->read(clock);

        /* calculate the delta since the last update_wall_time: */
        cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;

        nsec = cycle_delta * tk->mult + tk->xtime_nsec;
        nsec >>= tk->shift;

        /* If arch requires, add in gettimeoffset() */
        return nsec + arch_gettimeoffset();
}

static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
{
        cycle_t cycle_now, cycle_delta;
        struct clocksource *clock;
        s64 nsec;

        /* read clocksource: */
        clock = tk->clock;
        cycle_now = clock->read(clock);

        /* calculate the delta since the last update_wall_time: */
        cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;

        /* convert delta to nanoseconds. */
        nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);

        /* If arch requires, add in gettimeoffset() */
        return nsec + arch_gettimeoffset();
}

/* must hold write on timekeeper.lock */
static void timekeeping_update(struct timekeeper *tk, bool clearntp)
{
        struct timespec xt;

        if (clearntp) {
                tk->ntp_error = 0;
                ntp_clear();
        }
        xt = tk_xtime(tk);
        update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult);
}

/**
 * timekeeping_forward_now - update clock to the current time
 *
 * Forward the current clock to update its state since the last call to
 * update_wall_time(). This is useful before significant clock changes,
 * as it avoids having to deal with this time offset explicitly.
 */
static void timekeeping_forward_now(struct timekeeper *tk)
{
        cycle_t cycle_now, cycle_delta;
        struct clocksource *clock;
        s64 nsec;

        clock = tk->clock;
        cycle_now = clock->read(clock);
        cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
        clock->cycle_last = cycle_now;

        tk->xtime_nsec += cycle_delta * tk->mult;

        /* If arch requires, add in gettimeoffset() */
        tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift;

        tk_normalize_xtime(tk);

        nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
        timespec_add_ns(&tk->raw_time, nsec);
}

/**
 * getnstimeofday - Returns the time of day in a timespec
 * @ts:         pointer to the timespec to be set
 *
 * Returns the time of day in a timespec.
 */
void getnstimeofday(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        s64 nsecs = 0;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqbegin(&tk->lock);

                ts->tv_sec = tk->xtime_sec;
                ts->tv_nsec = timekeeping_get_ns(tk);

        } while (read_seqretry(&tk->lock, seq));

        timespec_add_ns(ts, nsecs);
}
EXPORT_SYMBOL(getnstimeofday);

ktime_t ktime_get(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned int seq;
        s64 secs, nsecs;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqbegin(&tk->lock);
                secs = tk->xtime_sec + tk->wall_to_monotonic.tv_sec;
                nsecs = timekeeping_get_ns(tk) + tk->wall_to_monotonic.tv_nsec;

        } while (read_seqretry(&tk->lock, seq));
        /*
         * Use ktime_set/ktime_add_ns to create a proper ktime on
         * 32-bit architectures without CONFIG_KTIME_SCALAR.
         */
        return ktime_add_ns(ktime_set(secs, 0), nsecs);
}
EXPORT_SYMBOL_GPL(ktime_get);

/**
 * ktime_get_ts - get the monotonic clock in timespec format
 * @ts:         pointer to timespec variable
 *
 * The function calculates the monotonic clock from the realtime
 * clock and the wall_to_monotonic offset and stores the result
 * in normalized timespec format in the variable pointed to by @ts.
 */
void ktime_get_ts(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec tomono;
        unsigned int seq;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqbegin(&tk->lock);
                ts->tv_sec = tk->xtime_sec;
                ts->tv_nsec = timekeeping_get_ns(tk);
                tomono = tk->wall_to_monotonic;

        } while (read_seqretry(&tk->lock, seq));

        set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
                                ts->tv_nsec + tomono.tv_nsec);
}
EXPORT_SYMBOL_GPL(ktime_get_ts);

#ifdef CONFIG_NTP_PPS

/**
 * getnstime_raw_and_real - get day and raw monotonic time in timespec format
 * @ts_raw:     pointer to the timespec to be set to raw monotonic time
 * @ts_real:    pointer to the timespec to be set to the time of day
 *
 * This function reads both the time of day and raw monotonic time at the
 * same time atomically and stores the resulting timestamps in timespec
 * format.
 */
void getnstime_raw_and_real(struct timespec *ts_raw, struct timespec *ts_real)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        s64 nsecs_raw, nsecs_real;

        WARN_ON_ONCE(timekeeping_suspended);

        do {
                seq = read_seqbegin(&tk->lock);

                *ts_raw = tk->raw_time;
                ts_real->tv_sec = tk->xtime_sec;
                ts_real->tv_nsec = 0;

                nsecs_raw = timekeeping_get_ns_raw(tk);
                nsecs_real = timekeeping_get_ns(tk);

        } while (read_seqretry(&tk->lock, seq));

        timespec_add_ns(ts_raw, nsecs_raw);
        timespec_add_ns(ts_real, nsecs_real);
}
EXPORT_SYMBOL(getnstime_raw_and_real);

#endif /* CONFIG_NTP_PPS */

/**
 * do_gettimeofday - Returns the time of day in a timeval
 * @tv:         pointer to the timeval to be set
 *
 * NOTE: Users should be converted to using getnstimeofday()
 */
void do_gettimeofday(struct timeval *tv)
{
        struct timespec now;

        getnstimeofday(&now);
        tv->tv_sec = now.tv_sec;
        tv->tv_usec = now.tv_nsec/1000;
}
EXPORT_SYMBOL(do_gettimeofday);

/**
 * do_settimeofday - Sets the time of day
 * @tv:         pointer to the timespec variable containing the new time
 *
 * Sets the time of day to the new time and update NTP and notify hrtimers
 */
int do_settimeofday(const struct timespec *tv)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec ts_delta, xt;
        unsigned long flags;

        if (!timespec_valid(tv))
                return -EINVAL;

        write_seqlock_irqsave(&tk->lock, flags);

        timekeeping_forward_now(tk);

        xt = tk_xtime(tk);
        ts_delta.tv_sec = tv->tv_sec - xt.tv_sec;
        ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec;

        tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, ts_delta));

        tk_set_xtime(tk, tv);

        timekeeping_update(tk, true);

        write_sequnlock_irqrestore(&tk->lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();

        return 0;
}
EXPORT_SYMBOL(do_settimeofday);

/**
 * timekeeping_inject_offset - Adds or subtracts from the current time.
 * @tv:         pointer to the timespec variable containing the offset
 *
 * Adds or subtracts an offset value from the current time.
 */
int timekeeping_inject_offset(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long flags;
        struct timespec tmp;
        int ret = 0;

        if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC)
                return -EINVAL;

        write_seqlock_irqsave(&tk->lock, flags);

        timekeeping_forward_now(tk);

        /* Make sure the proposed value is valid */
        tmp = timespec_add(tk_xtime(tk),  *ts);
        if (!timespec_valid(&tmp)) {
                ret = -EINVAL;
                goto error;
        }

        tk_xtime_add(tk, ts);
        tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts));

error: /* even if we error out, we forwarded the time, so call update */
        timekeeping_update(tk, true);

        write_sequnlock_irqrestore(&tk->lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();

        return ret;
}
EXPORT_SYMBOL(timekeeping_inject_offset);

/**
 * change_clocksource - Swaps clocksources if a new one is available
 *
 * Accumulates current time interval and initializes new clocksource
 */
static int change_clocksource(void *data)
{
        struct timekeeper *tk = &timekeeper;
        struct clocksource *new, *old;
        unsigned long flags;

        new = (struct clocksource *) data;

        write_seqlock_irqsave(&tk->lock, flags);

        timekeeping_forward_now(tk);
        if (!new->enable || new->enable(new) == 0) {
                old = tk->clock;
                tk_setup_internals(tk, new);
                if (old->disable)
                        old->disable(old);
        }
        timekeeping_update(tk, true);

        write_sequnlock_irqrestore(&tk->lock, flags);

        return 0;
}

/**
 * timekeeping_notify - Install a new clock source
 * @clock:              pointer to the clock source
 *
 * This function is called from clocksource.c after a new, better clock
 * source has been registered. The caller holds the clocksource_mutex.
 */
void timekeeping_notify(struct clocksource *clock)
{
        struct timekeeper *tk = &timekeeper;

        if (tk->clock == clock)
                return;
        stop_machine(change_clocksource, clock, NULL);
        tick_clock_notify();
}

/**
 * ktime_get_real - get the real (wall-) time in ktime_t format
 *
 * returns the time in ktime_t format
 */
ktime_t ktime_get_real(void)
{
        struct timespec now;

        getnstimeofday(&now);

        return timespec_to_ktime(now);
}
EXPORT_SYMBOL_GPL(ktime_get_real);

/**
 * getrawmonotonic - Returns the raw monotonic time in a timespec
 * @ts:         pointer to the timespec to be set
 *
 * Returns the raw monotonic time (completely un-modified by ntp)
 */
void getrawmonotonic(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        s64 nsecs;

        do {
                seq = read_seqbegin(&tk->lock);
                nsecs = timekeeping_get_ns_raw(tk);
                *ts = tk->raw_time;

        } while (read_seqretry(&tk->lock, seq));

        timespec_add_ns(ts, nsecs);
}
EXPORT_SYMBOL(getrawmonotonic);

/**
 * timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
 */
int timekeeping_valid_for_hres(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        int ret;

        do {
                seq = read_seqbegin(&tk->lock);

                ret = tk->clock->flags & CLOCK_SOURCE_VALID_FOR_HRES;

        } while (read_seqretry(&tk->lock, seq));

        return ret;
}

/**
 * timekeeping_max_deferment - Returns max time the clocksource can be deferred
 */
u64 timekeeping_max_deferment(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        u64 ret;

        do {
                seq = read_seqbegin(&tk->lock);

                ret = tk->clock->max_idle_ns;

        } while (read_seqretry(&tk->lock, seq));

        return ret;
}

/**
 * read_persistent_clock -  Return time from the persistent clock.
 *
 * Weak dummy function for arches that do not yet support it.
 * Reads the time from the battery backed persistent clock.
 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
 *
 *  XXX - Do be sure to remove it once all arches implement it.
 */
void __attribute__((weak)) read_persistent_clock(struct timespec *ts)
{
        ts->tv_sec = 0;
        ts->tv_nsec = 0;
}

/**
 * read_boot_clock -  Return time of the system start.
 *
 * Weak dummy function for arches that do not yet support it.
 * Function to read the exact time the system has been started.
 * Returns a timespec with tv_sec=0 and tv_nsec=0 if unsupported.
 *
 *  XXX - Do be sure to remove it once all arches implement it.
 */
void __attribute__((weak)) read_boot_clock(struct timespec *ts)
{
        ts->tv_sec = 0;
        ts->tv_nsec = 0;
}

/*
 * timekeeping_init - Initializes the clocksource and common timekeeping values
 */
void __init timekeeping_init(void)
{
        struct timekeeper *tk = &timekeeper;
        struct clocksource *clock;
        unsigned long flags;
        struct timespec now, boot, tmp;

        read_persistent_clock(&now);
        if (!timespec_valid(&now)) {
                pr_warn("WARNING: Persistent clock returned invalid value!\n"
                        "         Check your CMOS/BIOS settings.\n");
                now.tv_sec = 0;
                now.tv_nsec = 0;
        }

        read_boot_clock(&boot);
        if (!timespec_valid(&boot)) {
                pr_warn("WARNING: Boot clock returned invalid value!\n"
                        "         Check your CMOS/BIOS settings.\n");
                boot.tv_sec = 0;
                boot.tv_nsec = 0;
        }

        seqlock_init(&tk->lock);

        ntp_init();

        write_seqlock_irqsave(&tk->lock, flags);
        clock = clocksource_default_clock();
        if (clock->enable)
                clock->enable(clock);
        tk_setup_internals(tk, clock);

        tk_set_xtime(tk, &now);
        tk->raw_time.tv_sec = 0;
        tk->raw_time.tv_nsec = 0;
        if (boot.tv_sec == 0 && boot.tv_nsec == 0)
                boot = tk_xtime(tk);

        set_normalized_timespec(&tmp, -boot.tv_sec, -boot.tv_nsec);
        tk_set_wall_to_mono(tk, tmp);

        tmp.tv_sec = 0;
        tmp.tv_nsec = 0;
        tk_set_sleep_time(tk, tmp);

        write_sequnlock_irqrestore(&tk->lock, flags);
}

/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;

/**
 * __timekeeping_inject_sleeptime - Internal function to add sleep interval
 * @delta: pointer to a timespec delta value
 *
 * Takes a timespec offset measuring a suspend interval and properly
 * adds the sleep offset to the timekeeping variables.
 */
static void __timekeeping_inject_sleeptime(struct timekeeper *tk,
                                                        struct timespec *delta)
{
        if (!timespec_valid(delta)) {
                printk(KERN_WARNING "__timekeeping_inject_sleeptime: Invalid "
                                        "sleep delta value!\n");
                return;
        }
        tk_xtime_add(tk, delta);
        tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *delta));
        tk_set_sleep_time(tk, timespec_add(tk->total_sleep_time, *delta));
}

/**
 * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
 * @delta: pointer to a timespec delta value
 *
 * This hook is for architectures that cannot support read_persistent_clock
 * because their RTC/persistent clock is only accessible when irqs are enabled.
 *
 * This function should only be called by rtc_resume(), and allows
 * a suspend offset to be injected into the timekeeping values.
 */
void timekeeping_inject_sleeptime(struct timespec *delta)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long flags;
        struct timespec ts;

        /* Make sure we don't set the clock twice */
        read_persistent_clock(&ts);
        if (!(ts.tv_sec == 0 && ts.tv_nsec == 0))
                return;

        write_seqlock_irqsave(&tk->lock, flags);

        timekeeping_forward_now(tk);

        __timekeeping_inject_sleeptime(tk, delta);

        timekeeping_update(tk, true);

        write_sequnlock_irqrestore(&tk->lock, flags);

        /* signal hrtimers about time change */
        clock_was_set();
}

/**
 * timekeeping_resume - Resumes the generic timekeeping subsystem.
 *
 * This is for the generic clocksource timekeeping.
 * xtime/wall_to_monotonic/jiffies/etc are
 * still managed by arch specific suspend/resume code.
 */
static void timekeeping_resume(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long flags;
        struct timespec ts;

        read_persistent_clock(&ts);

        clocksource_resume();

        write_seqlock_irqsave(&tk->lock, flags);

        if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
                ts = timespec_sub(ts, timekeeping_suspend_time);
                __timekeeping_inject_sleeptime(tk, &ts);
        }
        /* re-base the last cycle value */
        tk->clock->cycle_last = tk->clock->read(tk->clock);
        tk->ntp_error = 0;
        timekeeping_suspended = 0;
        timekeeping_update(tk, false);
        write_sequnlock_irqrestore(&tk->lock, flags);

        touch_softlockup_watchdog();

        clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);

        /* Resume hrtimers */
        hrtimers_resume();
}

static int timekeeping_suspend(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long flags;
        struct timespec         delta, delta_delta;
        static struct timespec  old_delta;

        read_persistent_clock(&timekeeping_suspend_time);

        write_seqlock_irqsave(&tk->lock, flags);
        timekeeping_forward_now(tk);
        timekeeping_suspended = 1;

        /*
         * To avoid drift caused by repeated suspend/resumes,
         * which each can add ~1 second drift error,
         * try to compensate so the difference in system time
         * and persistent_clock time stays close to constant.
         */
        delta = timespec_sub(tk_xtime(tk), timekeeping_suspend_time);
        delta_delta = timespec_sub(delta, old_delta);
        if (abs(delta_delta.tv_sec)  >= 2) {
                /*
                 * if delta_delta is too large, assume time correction
                 * has occured and set old_delta to the current delta.
                 */
                old_delta = delta;
        } else {
                /* Otherwise try to adjust old_system to compensate */
                timekeeping_suspend_time =
                        timespec_add(timekeeping_suspend_time, delta_delta);
        }
        write_sequnlock_irqrestore(&tk->lock, flags);

        clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
        clocksource_suspend();

        return 0;
}

/* sysfs resume/suspend bits for timekeeping */
static struct syscore_ops timekeeping_syscore_ops = {
        .resume         = timekeeping_resume,
        .suspend        = timekeeping_suspend,
};

static int __init timekeeping_init_ops(void)
{
        register_syscore_ops(&timekeeping_syscore_ops);
        return 0;
}

device_initcall(timekeeping_init_ops);

/*
 * If the error is already larger, we look ahead even further
 * to compensate for late or lost adjustments.
 */
static __always_inline int timekeeping_bigadjust(struct timekeeper *tk,
                                                 s64 error, s64 *interval,
                                                 s64 *offset)
{
        s64 tick_error, i;
        u32 look_ahead, adj;
        s32 error2, mult;

        /*
         * Use the current error value to determine how much to look ahead.
         * The larger the error the slower we adjust for it to avoid problems
         * with losing too many ticks, otherwise we would overadjust and
         * produce an even larger error.  The smaller the adjustment the
         * faster we try to adjust for it, as lost ticks can do less harm
         * here.  This is tuned so that an error of about 1 msec is adjusted
         * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
         */
        error2 = tk->ntp_error >> (NTP_SCALE_SHIFT + 22 - 2 * SHIFT_HZ);
        error2 = abs(error2);
        for (look_ahead = 0; error2 > 0; look_ahead++)
                error2 >>= 2;

        /*
         * Now calculate the error in (1 << look_ahead) ticks, but first
         * remove the single look ahead already included in the error.
         */
        tick_error = ntp_tick_length() >> (tk->ntp_error_shift + 1);
        tick_error -= tk->xtime_interval >> 1;
        error = ((error - tick_error) >> look_ahead) + tick_error;

        /* Finally calculate the adjustment shift value.  */
        i = *interval;
        mult = 1;
        if (error < 0) {
                error = -error;
                *interval = -*interval;
                *offset = -*offset;
                mult = -1;
        }
        for (adj = 0; error > i; adj++)
                error >>= 1;

        *interval <<= adj;
        *offset <<= adj;
        return mult << adj;
}

/*
 * Adjust the multiplier to reduce the error value,
 * this is optimized for the most common adjustments of -1,0,1,
 * for other values we can do a bit more work.
 */
static void timekeeping_adjust(struct timekeeper *tk, s64 offset)
{
        s64 error, interval = tk->cycle_interval;
        int adj;

        /*
         * The point of this is to check if the error is greater than half
         * an interval.
         *
         * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs.
         *
         * Note we subtract one in the shift, so that error is really error*2.
         * This "saves" dividing(shifting) interval twice, but keeps the
         * (error > interval) comparison as still measuring if error is
         * larger than half an interval.
         *
         * Note: It does not "save" on aggravation when reading the code.
         */
        error = tk->ntp_error >> (tk->ntp_error_shift - 1);
        if (error > interval) {
                /*
                 * We now divide error by 4(via shift), which checks if
                 * the error is greater than twice the interval.
                 * If it is greater, we need a bigadjust, if its smaller,
                 * we can adjust by 1.
                 */
                error >>= 2;
                /*
                 * XXX - In update_wall_time, we round up to the next
                 * nanosecond, and store the amount rounded up into
                 * the error. This causes the likely below to be unlikely.
                 *
                 * The proper fix is to avoid rounding up by using
                 * the high precision tk->xtime_nsec instead of
                 * xtime.tv_nsec everywhere. Fixing this will take some
                 * time.
                 */
                if (likely(error <= interval))
                        adj = 1;
                else
                        adj = timekeeping_bigadjust(tk, error, &interval, &offset);
        } else {
                if (error < -interval) {
                        /* See comment above, this is just switched for the negative */
                        error >>= 2;
                        if (likely(error >= -interval)) {
                                adj = -1;
                                interval = -interval;
                                offset = -offset;
                        } else {
                                adj = timekeeping_bigadjust(tk, error, &interval, &offset);
                        }
                } else {
                        goto out_adjust;
                }
        }

        if (unlikely(tk->clock->maxadj &&
                (tk->mult + adj > tk->clock->mult + tk->clock->maxadj))) {
                printk_once(KERN_WARNING
                        "Adjusting %s more than 11%% (%ld vs %ld)\n",
                        tk->clock->name, (long)tk->mult + adj,
                        (long)tk->clock->mult + tk->clock->maxadj);
        }
        /*
         * So the following can be confusing.
         *
         * To keep things simple, lets assume adj == 1 for now.
         *
         * When adj != 1, remember that the interval and offset values
         * have been appropriately scaled so the math is the same.
         *
         * The basic idea here is that we're increasing the multiplier
         * by one, this causes the xtime_interval to be incremented by
         * one cycle_interval. This is because:
         *      xtime_interval = cycle_interval * mult
         * So if mult is being incremented by one:
         *      xtime_interval = cycle_interval * (mult + 1)
         * Its the same as:
         *      xtime_interval = (cycle_interval * mult) + cycle_interval
         * Which can be shortened to:
         *      xtime_interval += cycle_interval
         *
         * So offset stores the non-accumulated cycles. Thus the current
         * time (in shifted nanoseconds) is:
         *      now = (offset * adj) + xtime_nsec
         * Now, even though we're adjusting the clock frequency, we have
         * to keep time consistent. In other words, we can't jump back
         * in time, and we also want to avoid jumping forward in time.
         *
         * So given the same offset value, we need the time to be the same
         * both before and after the freq adjustment.
         *      now = (offset * adj_1) + xtime_nsec_1
         *      now = (offset * adj_2) + xtime_nsec_2
         * So:
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * adj_2) + xtime_nsec_2
         * And we know:
         *      adj_2 = adj_1 + 1
         * So:
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * (adj_1+1)) + xtime_nsec_2
         *      (offset * adj_1) + xtime_nsec_1 =
         *              (offset * adj_1) + offset + xtime_nsec_2
         * Canceling the sides:
         *      xtime_nsec_1 = offset + xtime_nsec_2
         * Which gives us:
         *      xtime_nsec_2 = xtime_nsec_1 - offset
         * Which simplfies to:
         *      xtime_nsec -= offset
         *
         * XXX - TODO: Doc ntp_error calculation.
         */
        tk->mult += adj;
        tk->xtime_interval += interval;
        tk->xtime_nsec -= offset;
        tk->ntp_error -= (interval - offset) << tk->ntp_error_shift;

out_adjust:
        /*
         * It may be possible that when we entered this function, xtime_nsec
         * was very small.  Further, if we're slightly speeding the clocksource
         * in the code above, its possible the required corrective factor to
         * xtime_nsec could cause it to underflow.
         *
         * Now, since we already accumulated the second, cannot simply roll
         * the accumulated second back, since the NTP subsystem has been
         * notified via second_overflow. So instead we push xtime_nsec forward
         * by the amount we underflowed, and add that amount into the error.
         *
         * We'll correct this error next time through this function, when
         * xtime_nsec is not as small.
         */
        if (unlikely((s64)tk->xtime_nsec < 0)) {
                s64 neg = -(s64)tk->xtime_nsec;
                tk->xtime_nsec = 0;
                tk->ntp_error += neg << tk->ntp_error_shift;
        }

}

/**
 * accumulate_nsecs_to_secs - Accumulates nsecs into secs
 *
 * Helper function that accumulates a the nsecs greater then a second
 * from the xtime_nsec field to the xtime_secs field.
 * It also calls into the NTP code to handle leapsecond processing.
 *
 */
static inline void accumulate_nsecs_to_secs(struct timekeeper *tk)
{
        u64 nsecps = (u64)NSEC_PER_SEC << tk->shift;

        while (tk->xtime_nsec >= nsecps) {
                int leap;

                tk->xtime_nsec -= nsecps;
                tk->xtime_sec++;

                /* Figure out if its a leap sec and apply if needed */
                leap = second_overflow(tk->xtime_sec);
                if (unlikely(leap)) {
                        struct timespec ts;

                        tk->xtime_sec += leap;

                        ts.tv_sec = leap;
                        ts.tv_nsec = 0;
                        tk_set_wall_to_mono(tk,
                                timespec_sub(tk->wall_to_monotonic, ts));

                        clock_was_set_delayed();
                }
        }
}

/**
 * logarithmic_accumulation - shifted accumulation of cycles
 *
 * This functions accumulates a shifted interval of cycles into
 * into a shifted interval nanoseconds. Allows for O(log) accumulation
 * loop.
 *
 * Returns the unconsumed cycles.
 */
static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset,
                                                u32 shift)
{
        u64 raw_nsecs;

        /* If the offset is smaller then a shifted interval, do nothing */
        if (offset < tk->cycle_interval<<shift)
                return offset;

        /* Accumulate one shifted interval */
        offset -= tk->cycle_interval << shift;
        tk->clock->cycle_last += tk->cycle_interval << shift;

        tk->xtime_nsec += tk->xtime_interval << shift;
        accumulate_nsecs_to_secs(tk);

        /* Accumulate raw time */
        raw_nsecs = tk->raw_interval << shift;
        raw_nsecs += tk->raw_time.tv_nsec;
        if (raw_nsecs >= NSEC_PER_SEC) {
                u64 raw_secs = raw_nsecs;
                raw_nsecs = do_div(raw_secs, NSEC_PER_SEC);
                tk->raw_time.tv_sec += raw_secs;
        }
        tk->raw_time.tv_nsec = raw_nsecs;

        /* Accumulate error between NTP and clock interval */
        tk->ntp_error += ntp_tick_length() << shift;
        tk->ntp_error -= (tk->xtime_interval + tk->xtime_remainder) <<
                                                (tk->ntp_error_shift + shift);

        return offset;
}

/**
 * update_wall_time - Uses the current clocksource to increment the wall time
 *
 */
static void update_wall_time(void)
{
        struct clocksource *clock;
        struct timekeeper *tk = &timekeeper;
        cycle_t offset;
        int shift = 0, maxshift;
        unsigned long flags;
        s64 remainder;

        write_seqlock_irqsave(&tk->lock, flags);

        /* Make sure we're fully resumed: */
        if (unlikely(timekeeping_suspended))
                goto out;

        clock = tk->clock;

#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
        offset = tk->cycle_interval;
#else
        offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
#endif

        /* Check if there's really nothing to do */
        if (offset < tk->cycle_interval)
                goto out;

        /*
         * With NO_HZ we may have to accumulate many cycle_intervals
         * (think "ticks") worth of time at once. To do this efficiently,
         * we calculate the largest doubling multiple of cycle_intervals
         * that is smaller than the offset.  We then accumulate that
         * chunk in one go, and then try to consume the next smaller
         * doubled multiple.
         */
        shift = ilog2(offset) - ilog2(tk->cycle_interval);
        shift = max(0, shift);
        /* Bound shift to one less than what overflows tick_length */
        maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
        shift = min(shift, maxshift);
        while (offset >= tk->cycle_interval) {
                offset = logarithmic_accumulation(tk, offset, shift);
                if (offset < tk->cycle_interval<<shift)
                        shift--;
        }

        /* correct the clock when NTP error is too big */
        timekeeping_adjust(tk, offset);


        /*
        * Store only full nanoseconds into xtime_nsec after rounding
        * it up and add the remainder to the error difference.
        * XXX - This is necessary to avoid small 1ns inconsistnecies caused
        * by truncating the remainder in vsyscalls. However, it causes
        * additional work to be done in timekeeping_adjust(). Once
        * the vsyscall implementations are converted to use xtime_nsec
        * (shifted nanoseconds), this can be killed.
        */
        remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1);
        tk->xtime_nsec -= remainder;
        tk->xtime_nsec += 1ULL << tk->shift;
        tk->ntp_error += remainder << tk->ntp_error_shift;

        /*
         * Finally, make sure that after the rounding
         * xtime_nsec isn't larger than NSEC_PER_SEC
         */
        accumulate_nsecs_to_secs(tk);

        timekeeping_update(tk, false);

out:
        write_sequnlock_irqrestore(&tk->lock, flags);

}

/**
 * getboottime - Return the real time of system boot.
 * @ts:         pointer to the timespec to be set
 *
 * Returns the wall-time of boot in a timespec.
 *
 * This is based on the wall_to_monotonic offset and the total suspend
 * time. Calls to settimeofday will affect the value returned (which
 * basically means that however wrong your real time clock is at boot time,
 * you get the right time here).
 */
void getboottime(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec boottime = {
                .tv_sec = tk->wall_to_monotonic.tv_sec +
                                tk->total_sleep_time.tv_sec,
                .tv_nsec = tk->wall_to_monotonic.tv_nsec +
                                tk->total_sleep_time.tv_nsec
        };

        set_normalized_timespec(ts, -boottime.tv_sec, -boottime.tv_nsec);
}
EXPORT_SYMBOL_GPL(getboottime);

/**
 * get_monotonic_boottime - Returns monotonic time since boot
 * @ts:         pointer to the timespec to be set
 *
 * Returns the monotonic time since boot in a timespec.
 *
 * This is similar to CLOCK_MONTONIC/ktime_get_ts, but also
 * includes the time spent in suspend.
 */
void get_monotonic_boottime(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec tomono, sleep;
        unsigned int seq;

        WARN_ON(timekeeping_suspended);

        do {
                seq = read_seqbegin(&tk->lock);
                ts->tv_sec = tk->xtime_sec;
                ts->tv_nsec = timekeeping_get_ns(tk);
                tomono = tk->wall_to_monotonic;
                sleep = tk->total_sleep_time;

        } while (read_seqretry(&tk->lock, seq));

        set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec,
                        ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec);
}
EXPORT_SYMBOL_GPL(get_monotonic_boottime);

/**
 * ktime_get_boottime - Returns monotonic time since boot in a ktime
 *
 * Returns the monotonic time since boot in a ktime
 *
 * This is similar to CLOCK_MONTONIC/ktime_get, but also
 * includes the time spent in suspend.
 */
ktime_t ktime_get_boottime(void)
{
        struct timespec ts;

        get_monotonic_boottime(&ts);
        return timespec_to_ktime(ts);
}
EXPORT_SYMBOL_GPL(ktime_get_boottime);

/**
 * monotonic_to_bootbased - Convert the monotonic time to boot based.
 * @ts:         pointer to the timespec to be converted
 */
void monotonic_to_bootbased(struct timespec *ts)
{
        struct timekeeper *tk = &timekeeper;

        *ts = timespec_add(*ts, tk->total_sleep_time);
}
EXPORT_SYMBOL_GPL(monotonic_to_bootbased);

unsigned long get_seconds(void)
{
        struct timekeeper *tk = &timekeeper;

        return tk->xtime_sec;
}
EXPORT_SYMBOL(get_seconds);

struct timespec __current_kernel_time(void)
{
        struct timekeeper *tk = &timekeeper;

        return tk_xtime(tk);
}

struct timespec current_kernel_time(void)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec now;
        unsigned long seq;

        do {
                seq = read_seqbegin(&tk->lock);

                now = tk_xtime(tk);
        } while (read_seqretry(&tk->lock, seq));

        return now;
}
EXPORT_SYMBOL(current_kernel_time);

struct timespec get_monotonic_coarse(void)
{
        struct timekeeper *tk = &timekeeper;
        struct timespec now, mono;
        unsigned long seq;

        do {
                seq = read_seqbegin(&tk->lock);

                now = tk_xtime(tk);
                mono = tk->wall_to_monotonic;
        } while (read_seqretry(&tk->lock, seq));

        set_normalized_timespec(&now, now.tv_sec + mono.tv_sec,
                                now.tv_nsec + mono.tv_nsec);
        return now;
}

/*
 * The 64-bit jiffies value is not atomic - you MUST NOT read it
 * without sampling the sequence number in xtime_lock.
 * jiffies is defined in the linker script...
 */
void do_timer(unsigned long ticks)
{
        jiffies_64 += ticks;
        update_wall_time();
        calc_global_load(ticks);
}

/**
 * get_xtime_and_monotonic_and_sleep_offset() - get xtime, wall_to_monotonic,
 *    and sleep offsets.
 * @xtim:       pointer to timespec to be set with xtime
 * @wtom:       pointer to timespec to be set with wall_to_monotonic
 * @sleep:      pointer to timespec to be set with time in suspend
 */
void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
                                struct timespec *wtom, struct timespec *sleep)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;

        do {
                seq = read_seqbegin(&tk->lock);
                *xtim = tk_xtime(tk);
                *wtom = tk->wall_to_monotonic;
                *sleep = tk->total_sleep_time;
        } while (read_seqretry(&tk->lock, seq));
}

#ifdef CONFIG_HIGH_RES_TIMERS
/**
 * ktime_get_update_offsets - hrtimer helper
 * @offs_real:  pointer to storage for monotonic -> realtime offset
 * @offs_boot:  pointer to storage for monotonic -> boottime offset
 *
 * Returns current monotonic time and updates the offsets
 * Called from hrtimer_interupt() or retrigger_next_event()
 */
ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
{
        struct timekeeper *tk = &timekeeper;
        ktime_t now;
        unsigned int seq;
        u64 secs, nsecs;

        do {
                seq = read_seqbegin(&tk->lock);

                secs = tk->xtime_sec;
                nsecs = timekeeping_get_ns(tk);

                *offs_real = tk->offs_real;
                *offs_boot = tk->offs_boot;
        } while (read_seqretry(&tk->lock, seq));

        now = ktime_add_ns(ktime_set(secs, 0), nsecs);
        now = ktime_sub(now, *offs_real);
        return now;
}
#endif

/**
 * ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
 */
ktime_t ktime_get_monotonic_offset(void)
{
        struct timekeeper *tk = &timekeeper;
        unsigned long seq;
        struct timespec wtom;

        do {
                seq = read_seqbegin(&tk->lock);
                wtom = tk->wall_to_monotonic;
        } while (read_seqretry(&tk->lock, seq));

        return timespec_to_ktime(wtom);
}
EXPORT_SYMBOL_GPL(ktime_get_monotonic_offset);

/**
 * xtime_update() - advances the timekeeping infrastructure
 * @ticks:      number of ticks, that have elapsed since the last call.
 *
 * Must be called with interrupts disabled.
 */
void xtime_update(unsigned long ticks)
{
        write_seqlock(&xtime_lock);
        do_timer(ticks);
        write_sequnlock(&xtime_lock);
}