]> Pileus Git - ~andy/linux/blob - drivers/net/usb/usbnet.c
usbnet: include wait queue head in device structure
[~andy/linux] / drivers / net / usb / usbnet.c
1 /*
2  * USB Network driver infrastructure
3  * Copyright (C) 2000-2005 by David Brownell
4  * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, see <http://www.gnu.org/licenses/>.
18  */
19
20 /*
21  * This is a generic "USB networking" framework that works with several
22  * kinds of full and high speed networking devices:  host-to-host cables,
23  * smart usb peripherals, and actual Ethernet adapters.
24  *
25  * These devices usually differ in terms of control protocols (if they
26  * even have one!) and sometimes they define new framing to wrap or batch
27  * Ethernet packets.  Otherwise, they talk to USB pretty much the same,
28  * so interface (un)binding, endpoint I/O queues, fault handling, and other
29  * issues can usefully be addressed by this framework.
30  */
31
32 // #define      DEBUG                   // error path messages, extra info
33 // #define      VERBOSE                 // more; success messages
34
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/netdevice.h>
38 #include <linux/etherdevice.h>
39 #include <linux/ctype.h>
40 #include <linux/ethtool.h>
41 #include <linux/workqueue.h>
42 #include <linux/mii.h>
43 #include <linux/usb.h>
44 #include <linux/usb/usbnet.h>
45 #include <linux/slab.h>
46 #include <linux/kernel.h>
47 #include <linux/pm_runtime.h>
48
49 #define DRIVER_VERSION          "22-Aug-2005"
50
51
52 /*-------------------------------------------------------------------------*/
53
54 /*
55  * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
56  * Several dozen bytes of IPv4 data can fit in two such transactions.
57  * One maximum size Ethernet packet takes twenty four of them.
58  * For high speed, each frame comfortably fits almost 36 max size
59  * Ethernet packets (so queues should be bigger).
60  *
61  * The goal is to let the USB host controller be busy for 5msec or
62  * more before an irq is required, under load.  Jumbograms change
63  * the equation.
64  */
65 #define MAX_QUEUE_MEMORY        (60 * 1518)
66 #define RX_QLEN(dev)            ((dev)->rx_qlen)
67 #define TX_QLEN(dev)            ((dev)->tx_qlen)
68
69 // reawaken network queue this soon after stopping; else watchdog barks
70 #define TX_TIMEOUT_JIFFIES      (5*HZ)
71
72 // throttle rx/tx briefly after some faults, so khubd might disconnect()
73 // us (it polls at HZ/4 usually) before we report too many false errors.
74 #define THROTTLE_JIFFIES        (HZ/8)
75
76 // between wakeups
77 #define UNLINK_TIMEOUT_MS       3
78
79 /*-------------------------------------------------------------------------*/
80
81 // randomly generated ethernet address
82 static u8       node_id [ETH_ALEN];
83
84 static const char driver_name [] = "usbnet";
85
86 /* use ethtool to change the level for any given device */
87 static int msg_level = -1;
88 module_param (msg_level, int, 0);
89 MODULE_PARM_DESC (msg_level, "Override default message level");
90
91 /*-------------------------------------------------------------------------*/
92
93 /* handles CDC Ethernet and many other network "bulk data" interfaces */
94 int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
95 {
96         int                             tmp;
97         struct usb_host_interface       *alt = NULL;
98         struct usb_host_endpoint        *in = NULL, *out = NULL;
99         struct usb_host_endpoint        *status = NULL;
100
101         for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
102                 unsigned        ep;
103
104                 in = out = status = NULL;
105                 alt = intf->altsetting + tmp;
106
107                 /* take the first altsetting with in-bulk + out-bulk;
108                  * remember any status endpoint, just in case;
109                  * ignore other endpoints and altsettings.
110                  */
111                 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
112                         struct usb_host_endpoint        *e;
113                         int                             intr = 0;
114
115                         e = alt->endpoint + ep;
116                         switch (e->desc.bmAttributes) {
117                         case USB_ENDPOINT_XFER_INT:
118                                 if (!usb_endpoint_dir_in(&e->desc))
119                                         continue;
120                                 intr = 1;
121                                 /* FALLTHROUGH */
122                         case USB_ENDPOINT_XFER_BULK:
123                                 break;
124                         default:
125                                 continue;
126                         }
127                         if (usb_endpoint_dir_in(&e->desc)) {
128                                 if (!intr && !in)
129                                         in = e;
130                                 else if (intr && !status)
131                                         status = e;
132                         } else {
133                                 if (!out)
134                                         out = e;
135                         }
136                 }
137                 if (in && out)
138                         break;
139         }
140         if (!alt || !in || !out)
141                 return -EINVAL;
142
143         if (alt->desc.bAlternateSetting != 0 ||
144             !(dev->driver_info->flags & FLAG_NO_SETINT)) {
145                 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
146                                 alt->desc.bAlternateSetting);
147                 if (tmp < 0)
148                         return tmp;
149         }
150
151         dev->in = usb_rcvbulkpipe (dev->udev,
152                         in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
153         dev->out = usb_sndbulkpipe (dev->udev,
154                         out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
155         dev->status = status;
156         return 0;
157 }
158 EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
159
160 int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
161 {
162         int             tmp, i;
163         unsigned char   buf [13];
164
165         tmp = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
166         if (tmp != 12) {
167                 dev_dbg(&dev->udev->dev,
168                         "bad MAC string %d fetch, %d\n", iMACAddress, tmp);
169                 if (tmp >= 0)
170                         tmp = -EINVAL;
171                 return tmp;
172         }
173         for (i = tmp = 0; i < 6; i++, tmp += 2)
174                 dev->net->dev_addr [i] =
175                         (hex_to_bin(buf[tmp]) << 4) + hex_to_bin(buf[tmp + 1]);
176         return 0;
177 }
178 EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
179
180 static void intr_complete (struct urb *urb)
181 {
182         struct usbnet   *dev = urb->context;
183         int             status = urb->status;
184
185         switch (status) {
186         /* success */
187         case 0:
188                 dev->driver_info->status(dev, urb);
189                 break;
190
191         /* software-driven interface shutdown */
192         case -ENOENT:           /* urb killed */
193         case -ESHUTDOWN:        /* hardware gone */
194                 netif_dbg(dev, ifdown, dev->net,
195                           "intr shutdown, code %d\n", status);
196                 return;
197
198         /* NOTE:  not throttling like RX/TX, since this endpoint
199          * already polls infrequently
200          */
201         default:
202                 netdev_dbg(dev->net, "intr status %d\n", status);
203                 break;
204         }
205
206         status = usb_submit_urb (urb, GFP_ATOMIC);
207         if (status != 0)
208                 netif_err(dev, timer, dev->net,
209                           "intr resubmit --> %d\n", status);
210 }
211
212 static int init_status (struct usbnet *dev, struct usb_interface *intf)
213 {
214         char            *buf = NULL;
215         unsigned        pipe = 0;
216         unsigned        maxp;
217         unsigned        period;
218
219         if (!dev->driver_info->status)
220                 return 0;
221
222         pipe = usb_rcvintpipe (dev->udev,
223                         dev->status->desc.bEndpointAddress
224                                 & USB_ENDPOINT_NUMBER_MASK);
225         maxp = usb_maxpacket (dev->udev, pipe, 0);
226
227         /* avoid 1 msec chatter:  min 8 msec poll rate */
228         period = max ((int) dev->status->desc.bInterval,
229                 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
230
231         buf = kmalloc (maxp, GFP_KERNEL);
232         if (buf) {
233                 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
234                 if (!dev->interrupt) {
235                         kfree (buf);
236                         return -ENOMEM;
237                 } else {
238                         usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
239                                 buf, maxp, intr_complete, dev, period);
240                         dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
241                         dev_dbg(&intf->dev,
242                                 "status ep%din, %d bytes period %d\n",
243                                 usb_pipeendpoint(pipe), maxp, period);
244                 }
245         }
246         return 0;
247 }
248
249 /* Submit the interrupt URB if not previously submitted, increasing refcount */
250 int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
251 {
252         int ret = 0;
253
254         WARN_ON_ONCE(dev->interrupt == NULL);
255         if (dev->interrupt) {
256                 mutex_lock(&dev->interrupt_mutex);
257
258                 if (++dev->interrupt_count == 1)
259                         ret = usb_submit_urb(dev->interrupt, mem_flags);
260
261                 dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
262                         dev->interrupt_count);
263                 mutex_unlock(&dev->interrupt_mutex);
264         }
265         return ret;
266 }
267 EXPORT_SYMBOL_GPL(usbnet_status_start);
268
269 /* For resume; submit interrupt URB if previously submitted */
270 static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
271 {
272         int ret = 0;
273
274         mutex_lock(&dev->interrupt_mutex);
275         if (dev->interrupt_count) {
276                 ret = usb_submit_urb(dev->interrupt, mem_flags);
277                 dev_dbg(&dev->udev->dev,
278                         "submitted interrupt URB for resume\n");
279         }
280         mutex_unlock(&dev->interrupt_mutex);
281         return ret;
282 }
283
284 /* Kill the interrupt URB if all submitters want it killed */
285 void usbnet_status_stop(struct usbnet *dev)
286 {
287         if (dev->interrupt) {
288                 mutex_lock(&dev->interrupt_mutex);
289                 WARN_ON(dev->interrupt_count == 0);
290
291                 if (dev->interrupt_count && --dev->interrupt_count == 0)
292                         usb_kill_urb(dev->interrupt);
293
294                 dev_dbg(&dev->udev->dev,
295                         "decremented interrupt URB count to %d\n",
296                         dev->interrupt_count);
297                 mutex_unlock(&dev->interrupt_mutex);
298         }
299 }
300 EXPORT_SYMBOL_GPL(usbnet_status_stop);
301
302 /* For suspend; always kill interrupt URB */
303 static void __usbnet_status_stop_force(struct usbnet *dev)
304 {
305         if (dev->interrupt) {
306                 mutex_lock(&dev->interrupt_mutex);
307                 usb_kill_urb(dev->interrupt);
308                 dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
309                 mutex_unlock(&dev->interrupt_mutex);
310         }
311 }
312
313 /* Passes this packet up the stack, updating its accounting.
314  * Some link protocols batch packets, so their rx_fixup paths
315  * can return clones as well as just modify the original skb.
316  */
317 void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
318 {
319         int     status;
320
321         if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
322                 skb_queue_tail(&dev->rxq_pause, skb);
323                 return;
324         }
325
326         skb->protocol = eth_type_trans (skb, dev->net);
327         dev->net->stats.rx_packets++;
328         dev->net->stats.rx_bytes += skb->len;
329
330         netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
331                   skb->len + sizeof (struct ethhdr), skb->protocol);
332         memset (skb->cb, 0, sizeof (struct skb_data));
333
334         if (skb_defer_rx_timestamp(skb))
335                 return;
336
337         status = netif_rx (skb);
338         if (status != NET_RX_SUCCESS)
339                 netif_dbg(dev, rx_err, dev->net,
340                           "netif_rx status %d\n", status);
341 }
342 EXPORT_SYMBOL_GPL(usbnet_skb_return);
343
344 /* must be called if hard_mtu or rx_urb_size changed */
345 void usbnet_update_max_qlen(struct usbnet *dev)
346 {
347         enum usb_device_speed speed = dev->udev->speed;
348
349         switch (speed) {
350         case USB_SPEED_HIGH:
351                 dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
352                 dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
353                 break;
354         case USB_SPEED_SUPER:
355                 /*
356                  * Not take default 5ms qlen for super speed HC to
357                  * save memory, and iperf tests show 2.5ms qlen can
358                  * work well
359                  */
360                 dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
361                 dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
362                 break;
363         default:
364                 dev->rx_qlen = dev->tx_qlen = 4;
365         }
366 }
367 EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
368
369 \f
370 /*-------------------------------------------------------------------------
371  *
372  * Network Device Driver (peer link to "Host Device", from USB host)
373  *
374  *-------------------------------------------------------------------------*/
375
376 int usbnet_change_mtu (struct net_device *net, int new_mtu)
377 {
378         struct usbnet   *dev = netdev_priv(net);
379         int             ll_mtu = new_mtu + net->hard_header_len;
380         int             old_hard_mtu = dev->hard_mtu;
381         int             old_rx_urb_size = dev->rx_urb_size;
382
383         if (new_mtu <= 0)
384                 return -EINVAL;
385         // no second zero-length packet read wanted after mtu-sized packets
386         if ((ll_mtu % dev->maxpacket) == 0)
387                 return -EDOM;
388         net->mtu = new_mtu;
389
390         dev->hard_mtu = net->mtu + net->hard_header_len;
391         if (dev->rx_urb_size == old_hard_mtu) {
392                 dev->rx_urb_size = dev->hard_mtu;
393                 if (dev->rx_urb_size > old_rx_urb_size)
394                         usbnet_unlink_rx_urbs(dev);
395         }
396
397         /* max qlen depend on hard_mtu and rx_urb_size */
398         usbnet_update_max_qlen(dev);
399
400         return 0;
401 }
402 EXPORT_SYMBOL_GPL(usbnet_change_mtu);
403
404 /* The caller must hold list->lock */
405 static void __usbnet_queue_skb(struct sk_buff_head *list,
406                         struct sk_buff *newsk, enum skb_state state)
407 {
408         struct skb_data *entry = (struct skb_data *) newsk->cb;
409
410         __skb_queue_tail(list, newsk);
411         entry->state = state;
412 }
413
414 /*-------------------------------------------------------------------------*/
415
416 /* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
417  * completion callbacks.  2.5 should have fixed those bugs...
418  */
419
420 static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
421                 struct sk_buff_head *list, enum skb_state state)
422 {
423         unsigned long           flags;
424         enum skb_state          old_state;
425         struct skb_data *entry = (struct skb_data *) skb->cb;
426
427         spin_lock_irqsave(&list->lock, flags);
428         old_state = entry->state;
429         entry->state = state;
430         __skb_unlink(skb, list);
431         spin_unlock(&list->lock);
432         spin_lock(&dev->done.lock);
433         __skb_queue_tail(&dev->done, skb);
434         if (dev->done.qlen == 1)
435                 tasklet_schedule(&dev->bh);
436         spin_unlock_irqrestore(&dev->done.lock, flags);
437         return old_state;
438 }
439
440 /* some work can't be done in tasklets, so we use keventd
441  *
442  * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
443  * but tasklet_schedule() doesn't.  hope the failure is rare.
444  */
445 void usbnet_defer_kevent (struct usbnet *dev, int work)
446 {
447         set_bit (work, &dev->flags);
448         if (!schedule_work (&dev->kevent)) {
449                 if (net_ratelimit())
450                         netdev_err(dev->net, "kevent %d may have been dropped\n", work);
451         } else {
452                 netdev_dbg(dev->net, "kevent %d scheduled\n", work);
453         }
454 }
455 EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
456
457 /*-------------------------------------------------------------------------*/
458
459 static void rx_complete (struct urb *urb);
460
461 static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
462 {
463         struct sk_buff          *skb;
464         struct skb_data         *entry;
465         int                     retval = 0;
466         unsigned long           lockflags;
467         size_t                  size = dev->rx_urb_size;
468
469         /* prevent rx skb allocation when error ratio is high */
470         if (test_bit(EVENT_RX_KILL, &dev->flags)) {
471                 usb_free_urb(urb);
472                 return -ENOLINK;
473         }
474
475         skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
476         if (!skb) {
477                 netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
478                 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
479                 usb_free_urb (urb);
480                 return -ENOMEM;
481         }
482
483         entry = (struct skb_data *) skb->cb;
484         entry->urb = urb;
485         entry->dev = dev;
486         entry->length = 0;
487
488         usb_fill_bulk_urb (urb, dev->udev, dev->in,
489                 skb->data, size, rx_complete, skb);
490
491         spin_lock_irqsave (&dev->rxq.lock, lockflags);
492
493         if (netif_running (dev->net) &&
494             netif_device_present (dev->net) &&
495             !test_bit (EVENT_RX_HALT, &dev->flags) &&
496             !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
497                 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
498                 case -EPIPE:
499                         usbnet_defer_kevent (dev, EVENT_RX_HALT);
500                         break;
501                 case -ENOMEM:
502                         usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
503                         break;
504                 case -ENODEV:
505                         netif_dbg(dev, ifdown, dev->net, "device gone\n");
506                         netif_device_detach (dev->net);
507                         break;
508                 case -EHOSTUNREACH:
509                         retval = -ENOLINK;
510                         break;
511                 default:
512                         netif_dbg(dev, rx_err, dev->net,
513                                   "rx submit, %d\n", retval);
514                         tasklet_schedule (&dev->bh);
515                         break;
516                 case 0:
517                         __usbnet_queue_skb(&dev->rxq, skb, rx_start);
518                 }
519         } else {
520                 netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
521                 retval = -ENOLINK;
522         }
523         spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
524         if (retval) {
525                 dev_kfree_skb_any (skb);
526                 usb_free_urb (urb);
527         }
528         return retval;
529 }
530
531
532 /*-------------------------------------------------------------------------*/
533
534 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
535 {
536         if (dev->driver_info->rx_fixup &&
537             !dev->driver_info->rx_fixup (dev, skb)) {
538                 /* With RX_ASSEMBLE, rx_fixup() must update counters */
539                 if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
540                         dev->net->stats.rx_errors++;
541                 goto done;
542         }
543         // else network stack removes extra byte if we forced a short packet
544
545         /* all data was already cloned from skb inside the driver */
546         if (dev->driver_info->flags & FLAG_MULTI_PACKET)
547                 goto done;
548
549         if (skb->len < ETH_HLEN) {
550                 dev->net->stats.rx_errors++;
551                 dev->net->stats.rx_length_errors++;
552                 netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
553         } else {
554                 usbnet_skb_return(dev, skb);
555                 return;
556         }
557
558 done:
559         skb_queue_tail(&dev->done, skb);
560 }
561
562 /*-------------------------------------------------------------------------*/
563
564 static void rx_complete (struct urb *urb)
565 {
566         struct sk_buff          *skb = (struct sk_buff *) urb->context;
567         struct skb_data         *entry = (struct skb_data *) skb->cb;
568         struct usbnet           *dev = entry->dev;
569         int                     urb_status = urb->status;
570         enum skb_state          state;
571
572         skb_put (skb, urb->actual_length);
573         state = rx_done;
574         entry->urb = NULL;
575
576         switch (urb_status) {
577         /* success */
578         case 0:
579                 break;
580
581         /* stalls need manual reset. this is rare ... except that
582          * when going through USB 2.0 TTs, unplug appears this way.
583          * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
584          * storm, recovering as needed.
585          */
586         case -EPIPE:
587                 dev->net->stats.rx_errors++;
588                 usbnet_defer_kevent (dev, EVENT_RX_HALT);
589                 // FALLTHROUGH
590
591         /* software-driven interface shutdown */
592         case -ECONNRESET:               /* async unlink */
593         case -ESHUTDOWN:                /* hardware gone */
594                 netif_dbg(dev, ifdown, dev->net,
595                           "rx shutdown, code %d\n", urb_status);
596                 goto block;
597
598         /* we get controller i/o faults during khubd disconnect() delays.
599          * throttle down resubmits, to avoid log floods; just temporarily,
600          * so we still recover when the fault isn't a khubd delay.
601          */
602         case -EPROTO:
603         case -ETIME:
604         case -EILSEQ:
605                 dev->net->stats.rx_errors++;
606                 if (!timer_pending (&dev->delay)) {
607                         mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
608                         netif_dbg(dev, link, dev->net,
609                                   "rx throttle %d\n", urb_status);
610                 }
611 block:
612                 state = rx_cleanup;
613                 entry->urb = urb;
614                 urb = NULL;
615                 break;
616
617         /* data overrun ... flush fifo? */
618         case -EOVERFLOW:
619                 dev->net->stats.rx_over_errors++;
620                 // FALLTHROUGH
621
622         default:
623                 state = rx_cleanup;
624                 dev->net->stats.rx_errors++;
625                 netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
626                 break;
627         }
628
629         /* stop rx if packet error rate is high */
630         if (++dev->pkt_cnt > 30) {
631                 dev->pkt_cnt = 0;
632                 dev->pkt_err = 0;
633         } else {
634                 if (state == rx_cleanup)
635                         dev->pkt_err++;
636                 if (dev->pkt_err > 20)
637                         set_bit(EVENT_RX_KILL, &dev->flags);
638         }
639
640         state = defer_bh(dev, skb, &dev->rxq, state);
641
642         if (urb) {
643                 if (netif_running (dev->net) &&
644                     !test_bit (EVENT_RX_HALT, &dev->flags) &&
645                     state != unlink_start) {
646                         rx_submit (dev, urb, GFP_ATOMIC);
647                         usb_mark_last_busy(dev->udev);
648                         return;
649                 }
650                 usb_free_urb (urb);
651         }
652         netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
653 }
654
655 /*-------------------------------------------------------------------------*/
656 void usbnet_pause_rx(struct usbnet *dev)
657 {
658         set_bit(EVENT_RX_PAUSED, &dev->flags);
659
660         netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
661 }
662 EXPORT_SYMBOL_GPL(usbnet_pause_rx);
663
664 void usbnet_resume_rx(struct usbnet *dev)
665 {
666         struct sk_buff *skb;
667         int num = 0;
668
669         clear_bit(EVENT_RX_PAUSED, &dev->flags);
670
671         while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
672                 usbnet_skb_return(dev, skb);
673                 num++;
674         }
675
676         tasklet_schedule(&dev->bh);
677
678         netif_dbg(dev, rx_status, dev->net,
679                   "paused rx queue disabled, %d skbs requeued\n", num);
680 }
681 EXPORT_SYMBOL_GPL(usbnet_resume_rx);
682
683 void usbnet_purge_paused_rxq(struct usbnet *dev)
684 {
685         skb_queue_purge(&dev->rxq_pause);
686 }
687 EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
688
689 /*-------------------------------------------------------------------------*/
690
691 // unlink pending rx/tx; completion handlers do all other cleanup
692
693 static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
694 {
695         unsigned long           flags;
696         struct sk_buff          *skb;
697         int                     count = 0;
698
699         spin_lock_irqsave (&q->lock, flags);
700         while (!skb_queue_empty(q)) {
701                 struct skb_data         *entry;
702                 struct urb              *urb;
703                 int                     retval;
704
705                 skb_queue_walk(q, skb) {
706                         entry = (struct skb_data *) skb->cb;
707                         if (entry->state != unlink_start)
708                                 goto found;
709                 }
710                 break;
711 found:
712                 entry->state = unlink_start;
713                 urb = entry->urb;
714
715                 /*
716                  * Get reference count of the URB to avoid it to be
717                  * freed during usb_unlink_urb, which may trigger
718                  * use-after-free problem inside usb_unlink_urb since
719                  * usb_unlink_urb is always racing with .complete
720                  * handler(include defer_bh).
721                  */
722                 usb_get_urb(urb);
723                 spin_unlock_irqrestore(&q->lock, flags);
724                 // during some PM-driven resume scenarios,
725                 // these (async) unlinks complete immediately
726                 retval = usb_unlink_urb (urb);
727                 if (retval != -EINPROGRESS && retval != 0)
728                         netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
729                 else
730                         count++;
731                 usb_put_urb(urb);
732                 spin_lock_irqsave(&q->lock, flags);
733         }
734         spin_unlock_irqrestore (&q->lock, flags);
735         return count;
736 }
737
738 // Flush all pending rx urbs
739 // minidrivers may need to do this when the MTU changes
740
741 void usbnet_unlink_rx_urbs(struct usbnet *dev)
742 {
743         if (netif_running(dev->net)) {
744                 (void) unlink_urbs (dev, &dev->rxq);
745                 tasklet_schedule(&dev->bh);
746         }
747 }
748 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
749
750 /*-------------------------------------------------------------------------*/
751
752 // precondition: never called in_interrupt
753 static void usbnet_terminate_urbs(struct usbnet *dev)
754 {
755         DECLARE_WAITQUEUE(wait, current);
756         int temp;
757
758         /* ensure there are no more active urbs */
759         add_wait_queue(&dev->wait, &wait);
760         set_current_state(TASK_UNINTERRUPTIBLE);
761         temp = unlink_urbs(dev, &dev->txq) +
762                 unlink_urbs(dev, &dev->rxq);
763
764         /* maybe wait for deletions to finish. */
765         while (!skb_queue_empty(&dev->rxq)
766                 && !skb_queue_empty(&dev->txq)
767                 && !skb_queue_empty(&dev->done)) {
768                         schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
769                         set_current_state(TASK_UNINTERRUPTIBLE);
770                         netif_dbg(dev, ifdown, dev->net,
771                                   "waited for %d urb completions\n", temp);
772         }
773         set_current_state(TASK_RUNNING);
774         remove_wait_queue(&dev->wait, &wait);
775 }
776
777 int usbnet_stop (struct net_device *net)
778 {
779         struct usbnet           *dev = netdev_priv(net);
780         struct driver_info      *info = dev->driver_info;
781         int                     retval, pm;
782
783         clear_bit(EVENT_DEV_OPEN, &dev->flags);
784         netif_stop_queue (net);
785
786         netif_info(dev, ifdown, dev->net,
787                    "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
788                    net->stats.rx_packets, net->stats.tx_packets,
789                    net->stats.rx_errors, net->stats.tx_errors);
790
791         /* to not race resume */
792         pm = usb_autopm_get_interface(dev->intf);
793         /* allow minidriver to stop correctly (wireless devices to turn off
794          * radio etc) */
795         if (info->stop) {
796                 retval = info->stop(dev);
797                 if (retval < 0)
798                         netif_info(dev, ifdown, dev->net,
799                                    "stop fail (%d) usbnet usb-%s-%s, %s\n",
800                                    retval,
801                                    dev->udev->bus->bus_name, dev->udev->devpath,
802                                    info->description);
803         }
804
805         if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
806                 usbnet_terminate_urbs(dev);
807
808         usbnet_status_stop(dev);
809
810         usbnet_purge_paused_rxq(dev);
811
812         /* deferred work (task, timer, softirq) must also stop.
813          * can't flush_scheduled_work() until we drop rtnl (later),
814          * else workers could deadlock; so make workers a NOP.
815          */
816         dev->flags = 0;
817         del_timer_sync (&dev->delay);
818         tasklet_kill (&dev->bh);
819         if (!pm)
820                 usb_autopm_put_interface(dev->intf);
821
822         if (info->manage_power &&
823             !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags))
824                 info->manage_power(dev, 0);
825         else
826                 usb_autopm_put_interface(dev->intf);
827
828         return 0;
829 }
830 EXPORT_SYMBOL_GPL(usbnet_stop);
831
832 /*-------------------------------------------------------------------------*/
833
834 // posts reads, and enables write queuing
835
836 // precondition: never called in_interrupt
837
838 int usbnet_open (struct net_device *net)
839 {
840         struct usbnet           *dev = netdev_priv(net);
841         int                     retval;
842         struct driver_info      *info = dev->driver_info;
843
844         if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
845                 netif_info(dev, ifup, dev->net,
846                            "resumption fail (%d) usbnet usb-%s-%s, %s\n",
847                            retval,
848                            dev->udev->bus->bus_name,
849                            dev->udev->devpath,
850                            info->description);
851                 goto done_nopm;
852         }
853
854         // put into "known safe" state
855         if (info->reset && (retval = info->reset (dev)) < 0) {
856                 netif_info(dev, ifup, dev->net,
857                            "open reset fail (%d) usbnet usb-%s-%s, %s\n",
858                            retval,
859                            dev->udev->bus->bus_name,
860                            dev->udev->devpath,
861                            info->description);
862                 goto done;
863         }
864
865         /* hard_mtu or rx_urb_size may change in reset() */
866         usbnet_update_max_qlen(dev);
867
868         // insist peer be connected
869         if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
870                 netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
871                 goto done;
872         }
873
874         /* start any status interrupt transfer */
875         if (dev->interrupt) {
876                 retval = usbnet_status_start(dev, GFP_KERNEL);
877                 if (retval < 0) {
878                         netif_err(dev, ifup, dev->net,
879                                   "intr submit %d\n", retval);
880                         goto done;
881                 }
882         }
883
884         set_bit(EVENT_DEV_OPEN, &dev->flags);
885         netif_start_queue (net);
886         netif_info(dev, ifup, dev->net,
887                    "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
888                    (int)RX_QLEN(dev), (int)TX_QLEN(dev),
889                    dev->net->mtu,
890                    (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
891                    (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
892                    (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
893                    (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
894                    (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
895                    "simple");
896
897         /* reset rx error state */
898         dev->pkt_cnt = 0;
899         dev->pkt_err = 0;
900         clear_bit(EVENT_RX_KILL, &dev->flags);
901
902         // delay posting reads until we're fully open
903         tasklet_schedule (&dev->bh);
904         if (info->manage_power) {
905                 retval = info->manage_power(dev, 1);
906                 if (retval < 0) {
907                         retval = 0;
908                         set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
909                 } else {
910                         usb_autopm_put_interface(dev->intf);
911                 }
912         }
913         return retval;
914 done:
915         usb_autopm_put_interface(dev->intf);
916 done_nopm:
917         return retval;
918 }
919 EXPORT_SYMBOL_GPL(usbnet_open);
920
921 /*-------------------------------------------------------------------------*/
922
923 /* ethtool methods; minidrivers may need to add some more, but
924  * they'll probably want to use this base set.
925  */
926
927 int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
928 {
929         struct usbnet *dev = netdev_priv(net);
930
931         if (!dev->mii.mdio_read)
932                 return -EOPNOTSUPP;
933
934         return mii_ethtool_gset(&dev->mii, cmd);
935 }
936 EXPORT_SYMBOL_GPL(usbnet_get_settings);
937
938 int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
939 {
940         struct usbnet *dev = netdev_priv(net);
941         int retval;
942
943         if (!dev->mii.mdio_write)
944                 return -EOPNOTSUPP;
945
946         retval = mii_ethtool_sset(&dev->mii, cmd);
947
948         /* link speed/duplex might have changed */
949         if (dev->driver_info->link_reset)
950                 dev->driver_info->link_reset(dev);
951
952         /* hard_mtu or rx_urb_size may change in link_reset() */
953         usbnet_update_max_qlen(dev);
954
955         return retval;
956
957 }
958 EXPORT_SYMBOL_GPL(usbnet_set_settings);
959
960 u32 usbnet_get_link (struct net_device *net)
961 {
962         struct usbnet *dev = netdev_priv(net);
963
964         /* If a check_connect is defined, return its result */
965         if (dev->driver_info->check_connect)
966                 return dev->driver_info->check_connect (dev) == 0;
967
968         /* if the device has mii operations, use those */
969         if (dev->mii.mdio_read)
970                 return mii_link_ok(&dev->mii);
971
972         /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
973         return ethtool_op_get_link(net);
974 }
975 EXPORT_SYMBOL_GPL(usbnet_get_link);
976
977 int usbnet_nway_reset(struct net_device *net)
978 {
979         struct usbnet *dev = netdev_priv(net);
980
981         if (!dev->mii.mdio_write)
982                 return -EOPNOTSUPP;
983
984         return mii_nway_restart(&dev->mii);
985 }
986 EXPORT_SYMBOL_GPL(usbnet_nway_reset);
987
988 void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
989 {
990         struct usbnet *dev = netdev_priv(net);
991
992         strlcpy (info->driver, dev->driver_name, sizeof info->driver);
993         strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
994         strlcpy (info->fw_version, dev->driver_info->description,
995                 sizeof info->fw_version);
996         usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
997 }
998 EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
999
1000 u32 usbnet_get_msglevel (struct net_device *net)
1001 {
1002         struct usbnet *dev = netdev_priv(net);
1003
1004         return dev->msg_enable;
1005 }
1006 EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
1007
1008 void usbnet_set_msglevel (struct net_device *net, u32 level)
1009 {
1010         struct usbnet *dev = netdev_priv(net);
1011
1012         dev->msg_enable = level;
1013 }
1014 EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
1015
1016 /* drivers may override default ethtool_ops in their bind() routine */
1017 static const struct ethtool_ops usbnet_ethtool_ops = {
1018         .get_settings           = usbnet_get_settings,
1019         .set_settings           = usbnet_set_settings,
1020         .get_link               = usbnet_get_link,
1021         .nway_reset             = usbnet_nway_reset,
1022         .get_drvinfo            = usbnet_get_drvinfo,
1023         .get_msglevel           = usbnet_get_msglevel,
1024         .set_msglevel           = usbnet_set_msglevel,
1025         .get_ts_info            = ethtool_op_get_ts_info,
1026 };
1027
1028 /*-------------------------------------------------------------------------*/
1029
1030 static void __handle_link_change(struct usbnet *dev)
1031 {
1032         if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
1033                 return;
1034
1035         if (!netif_carrier_ok(dev->net)) {
1036                 /* kill URBs for reading packets to save bus bandwidth */
1037                 unlink_urbs(dev, &dev->rxq);
1038
1039                 /*
1040                  * tx_timeout will unlink URBs for sending packets and
1041                  * tx queue is stopped by netcore after link becomes off
1042                  */
1043         } else {
1044                 /* submitting URBs for reading packets */
1045                 tasklet_schedule(&dev->bh);
1046         }
1047
1048         /* hard_mtu or rx_urb_size may change during link change */
1049         usbnet_update_max_qlen(dev);
1050
1051         clear_bit(EVENT_LINK_CHANGE, &dev->flags);
1052 }
1053
1054 /* work that cannot be done in interrupt context uses keventd.
1055  *
1056  * NOTE:  with 2.5 we could do more of this using completion callbacks,
1057  * especially now that control transfers can be queued.
1058  */
1059 static void
1060 kevent (struct work_struct *work)
1061 {
1062         struct usbnet           *dev =
1063                 container_of(work, struct usbnet, kevent);
1064         int                     status;
1065
1066         /* usb_clear_halt() needs a thread context */
1067         if (test_bit (EVENT_TX_HALT, &dev->flags)) {
1068                 unlink_urbs (dev, &dev->txq);
1069                 status = usb_autopm_get_interface(dev->intf);
1070                 if (status < 0)
1071                         goto fail_pipe;
1072                 status = usb_clear_halt (dev->udev, dev->out);
1073                 usb_autopm_put_interface(dev->intf);
1074                 if (status < 0 &&
1075                     status != -EPIPE &&
1076                     status != -ESHUTDOWN) {
1077                         if (netif_msg_tx_err (dev))
1078 fail_pipe:
1079                                 netdev_err(dev->net, "can't clear tx halt, status %d\n",
1080                                            status);
1081                 } else {
1082                         clear_bit (EVENT_TX_HALT, &dev->flags);
1083                         if (status != -ESHUTDOWN)
1084                                 netif_wake_queue (dev->net);
1085                 }
1086         }
1087         if (test_bit (EVENT_RX_HALT, &dev->flags)) {
1088                 unlink_urbs (dev, &dev->rxq);
1089                 status = usb_autopm_get_interface(dev->intf);
1090                 if (status < 0)
1091                         goto fail_halt;
1092                 status = usb_clear_halt (dev->udev, dev->in);
1093                 usb_autopm_put_interface(dev->intf);
1094                 if (status < 0 &&
1095                     status != -EPIPE &&
1096                     status != -ESHUTDOWN) {
1097                         if (netif_msg_rx_err (dev))
1098 fail_halt:
1099                                 netdev_err(dev->net, "can't clear rx halt, status %d\n",
1100                                            status);
1101                 } else {
1102                         clear_bit (EVENT_RX_HALT, &dev->flags);
1103                         tasklet_schedule (&dev->bh);
1104                 }
1105         }
1106
1107         /* tasklet could resubmit itself forever if memory is tight */
1108         if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
1109                 struct urb      *urb = NULL;
1110                 int resched = 1;
1111
1112                 if (netif_running (dev->net))
1113                         urb = usb_alloc_urb (0, GFP_KERNEL);
1114                 else
1115                         clear_bit (EVENT_RX_MEMORY, &dev->flags);
1116                 if (urb != NULL) {
1117                         clear_bit (EVENT_RX_MEMORY, &dev->flags);
1118                         status = usb_autopm_get_interface(dev->intf);
1119                         if (status < 0) {
1120                                 usb_free_urb(urb);
1121                                 goto fail_lowmem;
1122                         }
1123                         if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
1124                                 resched = 0;
1125                         usb_autopm_put_interface(dev->intf);
1126 fail_lowmem:
1127                         if (resched)
1128                                 tasklet_schedule (&dev->bh);
1129                 }
1130         }
1131
1132         if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
1133                 struct driver_info      *info = dev->driver_info;
1134                 int                     retval = 0;
1135
1136                 clear_bit (EVENT_LINK_RESET, &dev->flags);
1137                 status = usb_autopm_get_interface(dev->intf);
1138                 if (status < 0)
1139                         goto skip_reset;
1140                 if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
1141                         usb_autopm_put_interface(dev->intf);
1142 skip_reset:
1143                         netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
1144                                     retval,
1145                                     dev->udev->bus->bus_name,
1146                                     dev->udev->devpath,
1147                                     info->description);
1148                 } else {
1149                         usb_autopm_put_interface(dev->intf);
1150                 }
1151
1152                 /* handle link change from link resetting */
1153                 __handle_link_change(dev);
1154         }
1155
1156         if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
1157                 __handle_link_change(dev);
1158
1159         if (dev->flags)
1160                 netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
1161 }
1162
1163 /*-------------------------------------------------------------------------*/
1164
1165 static void tx_complete (struct urb *urb)
1166 {
1167         struct sk_buff          *skb = (struct sk_buff *) urb->context;
1168         struct skb_data         *entry = (struct skb_data *) skb->cb;
1169         struct usbnet           *dev = entry->dev;
1170
1171         if (urb->status == 0) {
1172                 if (!(dev->driver_info->flags & FLAG_MULTI_PACKET))
1173                         dev->net->stats.tx_packets++;
1174                 dev->net->stats.tx_bytes += entry->length;
1175         } else {
1176                 dev->net->stats.tx_errors++;
1177
1178                 switch (urb->status) {
1179                 case -EPIPE:
1180                         usbnet_defer_kevent (dev, EVENT_TX_HALT);
1181                         break;
1182
1183                 /* software-driven interface shutdown */
1184                 case -ECONNRESET:               // async unlink
1185                 case -ESHUTDOWN:                // hardware gone
1186                         break;
1187
1188                 // like rx, tx gets controller i/o faults during khubd delays
1189                 // and so it uses the same throttling mechanism.
1190                 case -EPROTO:
1191                 case -ETIME:
1192                 case -EILSEQ:
1193                         usb_mark_last_busy(dev->udev);
1194                         if (!timer_pending (&dev->delay)) {
1195                                 mod_timer (&dev->delay,
1196                                         jiffies + THROTTLE_JIFFIES);
1197                                 netif_dbg(dev, link, dev->net,
1198                                           "tx throttle %d\n", urb->status);
1199                         }
1200                         netif_stop_queue (dev->net);
1201                         break;
1202                 default:
1203                         netif_dbg(dev, tx_err, dev->net,
1204                                   "tx err %d\n", entry->urb->status);
1205                         break;
1206                 }
1207         }
1208
1209         usb_autopm_put_interface_async(dev->intf);
1210         (void) defer_bh(dev, skb, &dev->txq, tx_done);
1211 }
1212
1213 /*-------------------------------------------------------------------------*/
1214
1215 void usbnet_tx_timeout (struct net_device *net)
1216 {
1217         struct usbnet           *dev = netdev_priv(net);
1218
1219         unlink_urbs (dev, &dev->txq);
1220         tasklet_schedule (&dev->bh);
1221
1222         // FIXME: device recovery -- reset?
1223 }
1224 EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1225
1226 /*-------------------------------------------------------------------------*/
1227
1228 static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
1229 {
1230         unsigned num_sgs, total_len = 0;
1231         int i, s = 0;
1232
1233         num_sgs = skb_shinfo(skb)->nr_frags + 1;
1234         if (num_sgs == 1)
1235                 return 0;
1236
1237         /* reserve one for zero packet */
1238         urb->sg = kmalloc((num_sgs + 1) * sizeof(struct scatterlist),
1239                           GFP_ATOMIC);
1240         if (!urb->sg)
1241                 return -ENOMEM;
1242
1243         urb->num_sgs = num_sgs;
1244         sg_init_table(urb->sg, urb->num_sgs + 1);
1245
1246         sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
1247         total_len += skb_headlen(skb);
1248
1249         for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1250                 struct skb_frag_struct *f = &skb_shinfo(skb)->frags[i];
1251
1252                 total_len += skb_frag_size(f);
1253                 sg_set_page(&urb->sg[i + s], f->page.p, f->size,
1254                                 f->page_offset);
1255         }
1256         urb->transfer_buffer_length = total_len;
1257
1258         return 1;
1259 }
1260
1261 netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1262                                      struct net_device *net)
1263 {
1264         struct usbnet           *dev = netdev_priv(net);
1265         int                     length;
1266         struct urb              *urb = NULL;
1267         struct skb_data         *entry;
1268         struct driver_info      *info = dev->driver_info;
1269         unsigned long           flags;
1270         int retval;
1271
1272         if (skb)
1273                 skb_tx_timestamp(skb);
1274
1275         // some devices want funky USB-level framing, for
1276         // win32 driver (usually) and/or hardware quirks
1277         if (info->tx_fixup) {
1278                 skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1279                 if (!skb) {
1280                         /* packet collected; minidriver waiting for more */
1281                         if (info->flags & FLAG_MULTI_PACKET)
1282                                 goto not_drop;
1283                         netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1284                         goto drop;
1285                 }
1286         }
1287
1288         if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1289                 netif_dbg(dev, tx_err, dev->net, "no urb\n");
1290                 goto drop;
1291         }
1292
1293         entry = (struct skb_data *) skb->cb;
1294         entry->urb = urb;
1295         entry->dev = dev;
1296
1297         usb_fill_bulk_urb (urb, dev->udev, dev->out,
1298                         skb->data, skb->len, tx_complete, skb);
1299         if (dev->can_dma_sg) {
1300                 if (build_dma_sg(skb, urb) < 0)
1301                         goto drop;
1302         }
1303         length = urb->transfer_buffer_length;
1304
1305         /* don't assume the hardware handles USB_ZERO_PACKET
1306          * NOTE:  strictly conforming cdc-ether devices should expect
1307          * the ZLP here, but ignore the one-byte packet.
1308          * NOTE2: CDC NCM specification is different from CDC ECM when
1309          * handling ZLP/short packets, so cdc_ncm driver will make short
1310          * packet itself if needed.
1311          */
1312         if (length % dev->maxpacket == 0) {
1313                 if (!(info->flags & FLAG_SEND_ZLP)) {
1314                         if (!(info->flags & FLAG_MULTI_PACKET)) {
1315                                 length++;
1316                                 if (skb_tailroom(skb) && !urb->num_sgs) {
1317                                         skb->data[skb->len] = 0;
1318                                         __skb_put(skb, 1);
1319                                 } else if (urb->num_sgs)
1320                                         sg_set_buf(&urb->sg[urb->num_sgs++],
1321                                                         dev->padding_pkt, 1);
1322                         }
1323                 } else
1324                         urb->transfer_flags |= URB_ZERO_PACKET;
1325         }
1326         entry->length = urb->transfer_buffer_length = length;
1327
1328         spin_lock_irqsave(&dev->txq.lock, flags);
1329         retval = usb_autopm_get_interface_async(dev->intf);
1330         if (retval < 0) {
1331                 spin_unlock_irqrestore(&dev->txq.lock, flags);
1332                 goto drop;
1333         }
1334
1335 #ifdef CONFIG_PM
1336         /* if this triggers the device is still a sleep */
1337         if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1338                 /* transmission will be done in resume */
1339                 usb_anchor_urb(urb, &dev->deferred);
1340                 /* no use to process more packets */
1341                 netif_stop_queue(net);
1342                 usb_put_urb(urb);
1343                 spin_unlock_irqrestore(&dev->txq.lock, flags);
1344                 netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1345                 goto deferred;
1346         }
1347 #endif
1348
1349         switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1350         case -EPIPE:
1351                 netif_stop_queue (net);
1352                 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1353                 usb_autopm_put_interface_async(dev->intf);
1354                 break;
1355         default:
1356                 usb_autopm_put_interface_async(dev->intf);
1357                 netif_dbg(dev, tx_err, dev->net,
1358                           "tx: submit urb err %d\n", retval);
1359                 break;
1360         case 0:
1361                 net->trans_start = jiffies;
1362                 __usbnet_queue_skb(&dev->txq, skb, tx_start);
1363                 if (dev->txq.qlen >= TX_QLEN (dev))
1364                         netif_stop_queue (net);
1365         }
1366         spin_unlock_irqrestore (&dev->txq.lock, flags);
1367
1368         if (retval) {
1369                 netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1370 drop:
1371                 dev->net->stats.tx_dropped++;
1372 not_drop:
1373                 if (skb)
1374                         dev_kfree_skb_any (skb);
1375                 if (urb) {
1376                         kfree(urb->sg);
1377                         usb_free_urb(urb);
1378                 }
1379         } else
1380                 netif_dbg(dev, tx_queued, dev->net,
1381                           "> tx, len %d, type 0x%x\n", length, skb->protocol);
1382 #ifdef CONFIG_PM
1383 deferred:
1384 #endif
1385         return NETDEV_TX_OK;
1386 }
1387 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1388
1389 static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
1390 {
1391         struct urb      *urb;
1392         int             i;
1393         int             ret = 0;
1394
1395         /* don't refill the queue all at once */
1396         for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
1397                 urb = usb_alloc_urb(0, flags);
1398                 if (urb != NULL) {
1399                         ret = rx_submit(dev, urb, flags);
1400                         if (ret)
1401                                 goto err;
1402                 } else {
1403                         ret = -ENOMEM;
1404                         goto err;
1405                 }
1406         }
1407 err:
1408         return ret;
1409 }
1410
1411 /*-------------------------------------------------------------------------*/
1412
1413 // tasklet (work deferred from completions, in_irq) or timer
1414
1415 static void usbnet_bh (unsigned long param)
1416 {
1417         struct usbnet           *dev = (struct usbnet *) param;
1418         struct sk_buff          *skb;
1419         struct skb_data         *entry;
1420
1421         while ((skb = skb_dequeue (&dev->done))) {
1422                 entry = (struct skb_data *) skb->cb;
1423                 switch (entry->state) {
1424                 case rx_done:
1425                         entry->state = rx_cleanup;
1426                         rx_process (dev, skb);
1427                         continue;
1428                 case tx_done:
1429                         kfree(entry->urb->sg);
1430                 case rx_cleanup:
1431                         usb_free_urb (entry->urb);
1432                         dev_kfree_skb (skb);
1433                         continue;
1434                 default:
1435                         netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1436                 }
1437         }
1438
1439         /* restart RX again after disabling due to high error rate */
1440         clear_bit(EVENT_RX_KILL, &dev->flags);
1441
1442         /* waiting for all pending urbs to complete?
1443          * only then can we forgo submitting anew
1444          */
1445         if (waitqueue_active(&dev->wait)) {
1446                 if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
1447                         wake_up_all(&dev->wait);
1448
1449         // or are we maybe short a few urbs?
1450         } else if (netif_running (dev->net) &&
1451                    netif_device_present (dev->net) &&
1452                    netif_carrier_ok(dev->net) &&
1453                    !timer_pending (&dev->delay) &&
1454                    !test_bit (EVENT_RX_HALT, &dev->flags)) {
1455                 int     temp = dev->rxq.qlen;
1456
1457                 if (temp < RX_QLEN(dev)) {
1458                         if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
1459                                 return;
1460                         if (temp != dev->rxq.qlen)
1461                                 netif_dbg(dev, link, dev->net,
1462                                           "rxqlen %d --> %d\n",
1463                                           temp, dev->rxq.qlen);
1464                         if (dev->rxq.qlen < RX_QLEN(dev))
1465                                 tasklet_schedule (&dev->bh);
1466                 }
1467                 if (dev->txq.qlen < TX_QLEN (dev))
1468                         netif_wake_queue (dev->net);
1469         }
1470 }
1471
1472
1473 /*-------------------------------------------------------------------------
1474  *
1475  * USB Device Driver support
1476  *
1477  *-------------------------------------------------------------------------*/
1478
1479 // precondition: never called in_interrupt
1480
1481 void usbnet_disconnect (struct usb_interface *intf)
1482 {
1483         struct usbnet           *dev;
1484         struct usb_device       *xdev;
1485         struct net_device       *net;
1486
1487         dev = usb_get_intfdata(intf);
1488         usb_set_intfdata(intf, NULL);
1489         if (!dev)
1490                 return;
1491
1492         xdev = interface_to_usbdev (intf);
1493
1494         netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1495                    intf->dev.driver->name,
1496                    xdev->bus->bus_name, xdev->devpath,
1497                    dev->driver_info->description);
1498
1499         net = dev->net;
1500         unregister_netdev (net);
1501
1502         cancel_work_sync(&dev->kevent);
1503
1504         usb_scuttle_anchored_urbs(&dev->deferred);
1505
1506         if (dev->driver_info->unbind)
1507                 dev->driver_info->unbind (dev, intf);
1508
1509         usb_kill_urb(dev->interrupt);
1510         usb_free_urb(dev->interrupt);
1511         kfree(dev->padding_pkt);
1512
1513         free_netdev(net);
1514 }
1515 EXPORT_SYMBOL_GPL(usbnet_disconnect);
1516
1517 static const struct net_device_ops usbnet_netdev_ops = {
1518         .ndo_open               = usbnet_open,
1519         .ndo_stop               = usbnet_stop,
1520         .ndo_start_xmit         = usbnet_start_xmit,
1521         .ndo_tx_timeout         = usbnet_tx_timeout,
1522         .ndo_change_mtu         = usbnet_change_mtu,
1523         .ndo_set_mac_address    = eth_mac_addr,
1524         .ndo_validate_addr      = eth_validate_addr,
1525 };
1526
1527 /*-------------------------------------------------------------------------*/
1528
1529 // precondition: never called in_interrupt
1530
1531 static struct device_type wlan_type = {
1532         .name   = "wlan",
1533 };
1534
1535 static struct device_type wwan_type = {
1536         .name   = "wwan",
1537 };
1538
1539 int
1540 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1541 {
1542         struct usbnet                   *dev;
1543         struct net_device               *net;
1544         struct usb_host_interface       *interface;
1545         struct driver_info              *info;
1546         struct usb_device               *xdev;
1547         int                             status;
1548         const char                      *name;
1549         struct usb_driver       *driver = to_usb_driver(udev->dev.driver);
1550
1551         /* usbnet already took usb runtime pm, so have to enable the feature
1552          * for usb interface, otherwise usb_autopm_get_interface may return
1553          * failure if RUNTIME_PM is enabled.
1554          */
1555         if (!driver->supports_autosuspend) {
1556                 driver->supports_autosuspend = 1;
1557                 pm_runtime_enable(&udev->dev);
1558         }
1559
1560         name = udev->dev.driver->name;
1561         info = (struct driver_info *) prod->driver_info;
1562         if (!info) {
1563                 dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1564                 return -ENODEV;
1565         }
1566         xdev = interface_to_usbdev (udev);
1567         interface = udev->cur_altsetting;
1568
1569         status = -ENOMEM;
1570
1571         // set up our own records
1572         net = alloc_etherdev(sizeof(*dev));
1573         if (!net)
1574                 goto out;
1575
1576         /* netdev_printk() needs this so do it as early as possible */
1577         SET_NETDEV_DEV(net, &udev->dev);
1578
1579         dev = netdev_priv(net);
1580         dev->udev = xdev;
1581         dev->intf = udev;
1582         dev->driver_info = info;
1583         dev->driver_name = name;
1584         dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1585                                 | NETIF_MSG_PROBE | NETIF_MSG_LINK);
1586         init_waitqueue_head(&dev->wait);
1587         skb_queue_head_init (&dev->rxq);
1588         skb_queue_head_init (&dev->txq);
1589         skb_queue_head_init (&dev->done);
1590         skb_queue_head_init(&dev->rxq_pause);
1591         dev->bh.func = usbnet_bh;
1592         dev->bh.data = (unsigned long) dev;
1593         INIT_WORK (&dev->kevent, kevent);
1594         init_usb_anchor(&dev->deferred);
1595         dev->delay.function = usbnet_bh;
1596         dev->delay.data = (unsigned long) dev;
1597         init_timer (&dev->delay);
1598         mutex_init (&dev->phy_mutex);
1599         mutex_init(&dev->interrupt_mutex);
1600         dev->interrupt_count = 0;
1601
1602         dev->net = net;
1603         strcpy (net->name, "usb%d");
1604         memcpy (net->dev_addr, node_id, sizeof node_id);
1605
1606         /* rx and tx sides can use different message sizes;
1607          * bind() should set rx_urb_size in that case.
1608          */
1609         dev->hard_mtu = net->mtu + net->hard_header_len;
1610 #if 0
1611 // dma_supported() is deeply broken on almost all architectures
1612         // possible with some EHCI controllers
1613         if (dma_supported (&udev->dev, DMA_BIT_MASK(64)))
1614                 net->features |= NETIF_F_HIGHDMA;
1615 #endif
1616
1617         net->netdev_ops = &usbnet_netdev_ops;
1618         net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1619         net->ethtool_ops = &usbnet_ethtool_ops;
1620
1621         // allow device-specific bind/init procedures
1622         // NOTE net->name still not usable ...
1623         if (info->bind) {
1624                 status = info->bind (dev, udev);
1625                 if (status < 0)
1626                         goto out1;
1627
1628                 // heuristic:  "usb%d" for links we know are two-host,
1629                 // else "eth%d" when there's reasonable doubt.  userspace
1630                 // can rename the link if it knows better.
1631                 if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1632                     ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1633                      (net->dev_addr [0] & 0x02) == 0))
1634                         strcpy (net->name, "eth%d");
1635                 /* WLAN devices should always be named "wlan%d" */
1636                 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1637                         strcpy(net->name, "wlan%d");
1638                 /* WWAN devices should always be named "wwan%d" */
1639                 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1640                         strcpy(net->name, "wwan%d");
1641
1642                 /* devices that cannot do ARP */
1643                 if ((dev->driver_info->flags & FLAG_NOARP) != 0)
1644                         net->flags |= IFF_NOARP;
1645
1646                 /* maybe the remote can't receive an Ethernet MTU */
1647                 if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1648                         net->mtu = dev->hard_mtu - net->hard_header_len;
1649         } else if (!info->in || !info->out)
1650                 status = usbnet_get_endpoints (dev, udev);
1651         else {
1652                 dev->in = usb_rcvbulkpipe (xdev, info->in);
1653                 dev->out = usb_sndbulkpipe (xdev, info->out);
1654                 if (!(info->flags & FLAG_NO_SETINT))
1655                         status = usb_set_interface (xdev,
1656                                 interface->desc.bInterfaceNumber,
1657                                 interface->desc.bAlternateSetting);
1658                 else
1659                         status = 0;
1660
1661         }
1662         if (status >= 0 && dev->status)
1663                 status = init_status (dev, udev);
1664         if (status < 0)
1665                 goto out3;
1666
1667         if (!dev->rx_urb_size)
1668                 dev->rx_urb_size = dev->hard_mtu;
1669         dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
1670
1671         /* let userspace know we have a random address */
1672         if (ether_addr_equal(net->dev_addr, node_id))
1673                 net->addr_assign_type = NET_ADDR_RANDOM;
1674
1675         if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1676                 SET_NETDEV_DEVTYPE(net, &wlan_type);
1677         if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1678                 SET_NETDEV_DEVTYPE(net, &wwan_type);
1679
1680         /* initialize max rx_qlen and tx_qlen */
1681         usbnet_update_max_qlen(dev);
1682
1683         if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) &&
1684                 !(info->flags & FLAG_MULTI_PACKET)) {
1685                 dev->padding_pkt = kzalloc(1, GFP_KERNEL);
1686                 if (!dev->padding_pkt) {
1687                         status = -ENOMEM;
1688                         goto out4;
1689                 }
1690         }
1691
1692         status = register_netdev (net);
1693         if (status)
1694                 goto out5;
1695         netif_info(dev, probe, dev->net,
1696                    "register '%s' at usb-%s-%s, %s, %pM\n",
1697                    udev->dev.driver->name,
1698                    xdev->bus->bus_name, xdev->devpath,
1699                    dev->driver_info->description,
1700                    net->dev_addr);
1701
1702         // ok, it's ready to go.
1703         usb_set_intfdata (udev, dev);
1704
1705         netif_device_attach (net);
1706
1707         if (dev->driver_info->flags & FLAG_LINK_INTR)
1708                 usbnet_link_change(dev, 0, 0);
1709
1710         return 0;
1711
1712 out5:
1713         kfree(dev->padding_pkt);
1714 out4:
1715         usb_free_urb(dev->interrupt);
1716 out3:
1717         if (info->unbind)
1718                 info->unbind (dev, udev);
1719 out1:
1720         free_netdev(net);
1721 out:
1722         return status;
1723 }
1724 EXPORT_SYMBOL_GPL(usbnet_probe);
1725
1726 /*-------------------------------------------------------------------------*/
1727
1728 /*
1729  * suspend the whole driver as soon as the first interface is suspended
1730  * resume only when the last interface is resumed
1731  */
1732
1733 int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1734 {
1735         struct usbnet           *dev = usb_get_intfdata(intf);
1736
1737         if (!dev->suspend_count++) {
1738                 spin_lock_irq(&dev->txq.lock);
1739                 /* don't autosuspend while transmitting */
1740                 if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1741                         dev->suspend_count--;
1742                         spin_unlock_irq(&dev->txq.lock);
1743                         return -EBUSY;
1744                 } else {
1745                         set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1746                         spin_unlock_irq(&dev->txq.lock);
1747                 }
1748                 /*
1749                  * accelerate emptying of the rx and queues, to avoid
1750                  * having everything error out.
1751                  */
1752                 netif_device_detach (dev->net);
1753                 usbnet_terminate_urbs(dev);
1754                 __usbnet_status_stop_force(dev);
1755
1756                 /*
1757                  * reattach so runtime management can use and
1758                  * wake the device
1759                  */
1760                 netif_device_attach (dev->net);
1761         }
1762         return 0;
1763 }
1764 EXPORT_SYMBOL_GPL(usbnet_suspend);
1765
1766 int usbnet_resume (struct usb_interface *intf)
1767 {
1768         struct usbnet           *dev = usb_get_intfdata(intf);
1769         struct sk_buff          *skb;
1770         struct urb              *res;
1771         int                     retval;
1772
1773         if (!--dev->suspend_count) {
1774                 /* resume interrupt URB if it was previously submitted */
1775                 __usbnet_status_start_force(dev, GFP_NOIO);
1776
1777                 spin_lock_irq(&dev->txq.lock);
1778                 while ((res = usb_get_from_anchor(&dev->deferred))) {
1779
1780                         skb = (struct sk_buff *)res->context;
1781                         retval = usb_submit_urb(res, GFP_ATOMIC);
1782                         if (retval < 0) {
1783                                 dev_kfree_skb_any(skb);
1784                                 kfree(res->sg);
1785                                 usb_free_urb(res);
1786                                 usb_autopm_put_interface_async(dev->intf);
1787                         } else {
1788                                 dev->net->trans_start = jiffies;
1789                                 __skb_queue_tail(&dev->txq, skb);
1790                         }
1791                 }
1792
1793                 smp_mb();
1794                 clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1795                 spin_unlock_irq(&dev->txq.lock);
1796
1797                 if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1798                         /* handle remote wakeup ASAP
1799                          * we cannot race against stop
1800                          */
1801                         if (netif_device_present(dev->net) &&
1802                                 !timer_pending(&dev->delay) &&
1803                                 !test_bit(EVENT_RX_HALT, &dev->flags))
1804                                         rx_alloc_submit(dev, GFP_NOIO);
1805
1806                         if (!(dev->txq.qlen >= TX_QLEN(dev)))
1807                                 netif_tx_wake_all_queues(dev->net);
1808                         tasklet_schedule (&dev->bh);
1809                 }
1810         }
1811
1812         if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
1813                 usb_autopm_get_interface_no_resume(intf);
1814
1815         return 0;
1816 }
1817 EXPORT_SYMBOL_GPL(usbnet_resume);
1818
1819 /*
1820  * Either a subdriver implements manage_power, then it is assumed to always
1821  * be ready to be suspended or it reports the readiness to be suspended
1822  * explicitly
1823  */
1824 void usbnet_device_suggests_idle(struct usbnet *dev)
1825 {
1826         if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
1827                 dev->intf->needs_remote_wakeup = 1;
1828                 usb_autopm_put_interface_async(dev->intf);
1829         }
1830 }
1831 EXPORT_SYMBOL(usbnet_device_suggests_idle);
1832
1833 /*
1834  * For devices that can do without special commands
1835  */
1836 int usbnet_manage_power(struct usbnet *dev, int on)
1837 {
1838         dev->intf->needs_remote_wakeup = on;
1839         return 0;
1840 }
1841 EXPORT_SYMBOL(usbnet_manage_power);
1842
1843 void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
1844 {
1845         /* update link after link is reseted */
1846         if (link && !need_reset)
1847                 netif_carrier_on(dev->net);
1848         else
1849                 netif_carrier_off(dev->net);
1850
1851         if (need_reset && link)
1852                 usbnet_defer_kevent(dev, EVENT_LINK_RESET);
1853         else
1854                 usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
1855 }
1856 EXPORT_SYMBOL(usbnet_link_change);
1857
1858 /*-------------------------------------------------------------------------*/
1859 static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1860                              u16 value, u16 index, void *data, u16 size)
1861 {
1862         void *buf = NULL;
1863         int err = -ENOMEM;
1864
1865         netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
1866                    " value=0x%04x index=0x%04x size=%d\n",
1867                    cmd, reqtype, value, index, size);
1868
1869         if (data) {
1870                 buf = kmalloc(size, GFP_KERNEL);
1871                 if (!buf)
1872                         goto out;
1873         }
1874
1875         err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
1876                               cmd, reqtype, value, index, buf, size,
1877                               USB_CTRL_GET_TIMEOUT);
1878         if (err > 0 && err <= size)
1879                 memcpy(data, buf, err);
1880         kfree(buf);
1881 out:
1882         return err;
1883 }
1884
1885 static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1886                               u16 value, u16 index, const void *data,
1887                               u16 size)
1888 {
1889         void *buf = NULL;
1890         int err = -ENOMEM;
1891
1892         netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1893                    " value=0x%04x index=0x%04x size=%d\n",
1894                    cmd, reqtype, value, index, size);
1895
1896         if (data) {
1897                 buf = kmemdup(data, size, GFP_KERNEL);
1898                 if (!buf)
1899                         goto out;
1900         }
1901
1902         err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
1903                               cmd, reqtype, value, index, buf, size,
1904                               USB_CTRL_SET_TIMEOUT);
1905         kfree(buf);
1906
1907 out:
1908         return err;
1909 }
1910
1911 /*
1912  * The function can't be called inside suspend/resume callback,
1913  * otherwise deadlock will be caused.
1914  */
1915 int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1916                     u16 value, u16 index, void *data, u16 size)
1917 {
1918         int ret;
1919
1920         if (usb_autopm_get_interface(dev->intf) < 0)
1921                 return -ENODEV;
1922         ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1923                                 data, size);
1924         usb_autopm_put_interface(dev->intf);
1925         return ret;
1926 }
1927 EXPORT_SYMBOL_GPL(usbnet_read_cmd);
1928
1929 /*
1930  * The function can't be called inside suspend/resume callback,
1931  * otherwise deadlock will be caused.
1932  */
1933 int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1934                      u16 value, u16 index, const void *data, u16 size)
1935 {
1936         int ret;
1937
1938         if (usb_autopm_get_interface(dev->intf) < 0)
1939                 return -ENODEV;
1940         ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
1941                                  data, size);
1942         usb_autopm_put_interface(dev->intf);
1943         return ret;
1944 }
1945 EXPORT_SYMBOL_GPL(usbnet_write_cmd);
1946
1947 /*
1948  * The function can be called inside suspend/resume callback safely
1949  * and should only be called by suspend/resume callback generally.
1950  */
1951 int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
1952                           u16 value, u16 index, void *data, u16 size)
1953 {
1954         return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1955                                  data, size);
1956 }
1957 EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
1958
1959 /*
1960  * The function can be called inside suspend/resume callback safely
1961  * and should only be called by suspend/resume callback generally.
1962  */
1963 int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
1964                           u16 value, u16 index, const void *data,
1965                           u16 size)
1966 {
1967         return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
1968                                   data, size);
1969 }
1970 EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
1971
1972 static void usbnet_async_cmd_cb(struct urb *urb)
1973 {
1974         struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
1975         int status = urb->status;
1976
1977         if (status < 0)
1978                 dev_dbg(&urb->dev->dev, "%s failed with %d",
1979                         __func__, status);
1980
1981         kfree(req);
1982         usb_free_urb(urb);
1983 }
1984
1985 /*
1986  * The caller must make sure that device can't be put into suspend
1987  * state until the control URB completes.
1988  */
1989 int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
1990                            u16 value, u16 index, const void *data, u16 size)
1991 {
1992         struct usb_ctrlrequest *req = NULL;
1993         struct urb *urb;
1994         int err = -ENOMEM;
1995         void *buf = NULL;
1996
1997         netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1998                    " value=0x%04x index=0x%04x size=%d\n",
1999                    cmd, reqtype, value, index, size);
2000
2001         urb = usb_alloc_urb(0, GFP_ATOMIC);
2002         if (!urb) {
2003                 netdev_err(dev->net, "Error allocating URB in"
2004                            " %s!\n", __func__);
2005                 goto fail;
2006         }
2007
2008         if (data) {
2009                 buf = kmemdup(data, size, GFP_ATOMIC);
2010                 if (!buf) {
2011                         netdev_err(dev->net, "Error allocating buffer"
2012                                    " in %s!\n", __func__);
2013                         goto fail_free;
2014                 }
2015         }
2016
2017         req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
2018         if (!req)
2019                 goto fail_free_buf;
2020
2021         req->bRequestType = reqtype;
2022         req->bRequest = cmd;
2023         req->wValue = cpu_to_le16(value);
2024         req->wIndex = cpu_to_le16(index);
2025         req->wLength = cpu_to_le16(size);
2026
2027         usb_fill_control_urb(urb, dev->udev,
2028                              usb_sndctrlpipe(dev->udev, 0),
2029                              (void *)req, buf, size,
2030                              usbnet_async_cmd_cb, req);
2031         urb->transfer_flags |= URB_FREE_BUFFER;
2032
2033         err = usb_submit_urb(urb, GFP_ATOMIC);
2034         if (err < 0) {
2035                 netdev_err(dev->net, "Error submitting the control"
2036                            " message: status=%d\n", err);
2037                 goto fail_free;
2038         }
2039         return 0;
2040
2041 fail_free_buf:
2042         kfree(buf);
2043 fail_free:
2044         kfree(req);
2045         usb_free_urb(urb);
2046 fail:
2047         return err;
2048
2049 }
2050 EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
2051 /*-------------------------------------------------------------------------*/
2052
2053 static int __init usbnet_init(void)
2054 {
2055         /* Compiler should optimize this out. */
2056         BUILD_BUG_ON(
2057                 FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
2058
2059         eth_random_addr(node_id);
2060         return 0;
2061 }
2062 module_init(usbnet_init);
2063
2064 static void __exit usbnet_exit(void)
2065 {
2066 }
2067 module_exit(usbnet_exit);
2068
2069 MODULE_AUTHOR("David Brownell");
2070 MODULE_DESCRIPTION("USB network driver framework");
2071 MODULE_LICENSE("GPL");