]> Pileus Git - ~andy/linux/blob - drivers/net/ethernet/realtek/8139too.c
3ccedeb8aba03703bcdff318dff2ff888eec4bfa
[~andy/linux] / drivers / net / ethernet / realtek / 8139too.c
1 /*
2
3         8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
4
5         Maintained by Jeff Garzik <jgarzik@pobox.com>
6         Copyright 2000-2002 Jeff Garzik
7
8         Much code comes from Donald Becker's rtl8139.c driver,
9         versions 1.13 and older.  This driver was originally based
10         on rtl8139.c version 1.07.  Header of rtl8139.c version 1.13:
11
12         -----<snip>-----
13
14                 Written 1997-2001 by Donald Becker.
15                 This software may be used and distributed according to the
16                 terms of the GNU General Public License (GPL), incorporated
17                 herein by reference.  Drivers based on or derived from this
18                 code fall under the GPL and must retain the authorship,
19                 copyright and license notice.  This file is not a complete
20                 program and may only be used when the entire operating
21                 system is licensed under the GPL.
22
23                 This driver is for boards based on the RTL8129 and RTL8139
24                 PCI ethernet chips.
25
26                 The author may be reached as becker@scyld.com, or C/O Scyld
27                 Computing Corporation 410 Severn Ave., Suite 210 Annapolis
28                 MD 21403
29
30                 Support and updates available at
31                 http://www.scyld.com/network/rtl8139.html
32
33                 Twister-tuning table provided by Kinston
34                 <shangh@realtek.com.tw>.
35
36         -----<snip>-----
37
38         This software may be used and distributed according to the terms
39         of the GNU General Public License, incorporated herein by reference.
40
41         Contributors:
42
43                 Donald Becker - he wrote the original driver, kudos to him!
44                 (but please don't e-mail him for support, this isn't his driver)
45
46                 Tigran Aivazian - bug fixes, skbuff free cleanup
47
48                 Martin Mares - suggestions for PCI cleanup
49
50                 David S. Miller - PCI DMA and softnet updates
51
52                 Ernst Gill - fixes ported from BSD driver
53
54                 Daniel Kobras - identified specific locations of
55                         posted MMIO write bugginess
56
57                 Gerard Sharp - bug fix, testing and feedback
58
59                 David Ford - Rx ring wrap fix
60
61                 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
62                 to find and fix a crucial bug on older chipsets.
63
64                 Donald Becker/Chris Butterworth/Marcus Westergren -
65                 Noticed various Rx packet size-related buglets.
66
67                 Santiago Garcia Mantinan - testing and feedback
68
69                 Jens David - 2.2.x kernel backports
70
71                 Martin Dennett - incredibly helpful insight on undocumented
72                 features of the 8139 chips
73
74                 Jean-Jacques Michel - bug fix
75
76                 Tobias Ringström - Rx interrupt status checking suggestion
77
78                 Andrew Morton - Clear blocked signals, avoid
79                 buffer overrun setting current->comm.
80
81                 Kalle Olavi Niemitalo - Wake-on-LAN ioctls
82
83                 Robert Kuebel - Save kernel thread from dying on any signal.
84
85         Submitting bug reports:
86
87                 "rtl8139-diag -mmmaaavvveefN" output
88                 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
89
90 */
91
92 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
93
94 #define DRV_NAME        "8139too"
95 #define DRV_VERSION     "0.9.28"
96
97
98 #include <linux/module.h>
99 #include <linux/kernel.h>
100 #include <linux/compiler.h>
101 #include <linux/pci.h>
102 #include <linux/init.h>
103 #include <linux/interrupt.h>
104 #include <linux/netdevice.h>
105 #include <linux/etherdevice.h>
106 #include <linux/rtnetlink.h>
107 #include <linux/delay.h>
108 #include <linux/ethtool.h>
109 #include <linux/mii.h>
110 #include <linux/completion.h>
111 #include <linux/crc32.h>
112 #include <linux/io.h>
113 #include <linux/uaccess.h>
114 #include <linux/gfp.h>
115 #include <asm/irq.h>
116
117 #define RTL8139_DRIVER_NAME   DRV_NAME " Fast Ethernet driver " DRV_VERSION
118
119 /* Default Message level */
120 #define RTL8139_DEF_MSG_ENABLE   (NETIF_MSG_DRV   | \
121                                  NETIF_MSG_PROBE  | \
122                                  NETIF_MSG_LINK)
123
124
125 /* define to 1, 2 or 3 to enable copious debugging info */
126 #define RTL8139_DEBUG 0
127
128 /* define to 1 to disable lightweight runtime debugging checks */
129 #undef RTL8139_NDEBUG
130
131
132 #ifdef RTL8139_NDEBUG
133 #  define assert(expr) do {} while (0)
134 #else
135 #  define assert(expr) \
136         if (unlikely(!(expr))) {                                \
137                 pr_err("Assertion failed! %s,%s,%s,line=%d\n",  \
138                        #expr, __FILE__, __func__, __LINE__);    \
139         }
140 #endif
141
142
143 /* A few user-configurable values. */
144 /* media options */
145 #define MAX_UNITS 8
146 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
147 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
148
149 /* Whether to use MMIO or PIO. Default to MMIO. */
150 #ifdef CONFIG_8139TOO_PIO
151 static bool use_io = true;
152 #else
153 static bool use_io = false;
154 #endif
155
156 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
157    The RTL chips use a 64 element hash table based on the Ethernet CRC.  */
158 static int multicast_filter_limit = 32;
159
160 /* bitmapped message enable number */
161 static int debug = -1;
162
163 /*
164  * Receive ring size
165  * Warning: 64K ring has hardware issues and may lock up.
166  */
167 #if defined(CONFIG_SH_DREAMCAST)
168 #define RX_BUF_IDX 0    /* 8K ring */
169 #else
170 #define RX_BUF_IDX      2       /* 32K ring */
171 #endif
172 #define RX_BUF_LEN      (8192 << RX_BUF_IDX)
173 #define RX_BUF_PAD      16
174 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
175
176 #if RX_BUF_LEN == 65536
177 #define RX_BUF_TOT_LEN  RX_BUF_LEN
178 #else
179 #define RX_BUF_TOT_LEN  (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
180 #endif
181
182 /* Number of Tx descriptor registers. */
183 #define NUM_TX_DESC     4
184
185 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
186 #define MAX_ETH_FRAME_SIZE      1536
187
188 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
189 #define TX_BUF_SIZE     MAX_ETH_FRAME_SIZE
190 #define TX_BUF_TOT_LEN  (TX_BUF_SIZE * NUM_TX_DESC)
191
192 /* PCI Tuning Parameters
193    Threshold is bytes transferred to chip before transmission starts. */
194 #define TX_FIFO_THRESH 256      /* In bytes, rounded down to 32 byte units. */
195
196 /* The following settings are log_2(bytes)-4:  0 == 16 bytes .. 6==1024, 7==end of packet. */
197 #define RX_FIFO_THRESH  7       /* Rx buffer level before first PCI xfer.  */
198 #define RX_DMA_BURST    7       /* Maximum PCI burst, '6' is 1024 */
199 #define TX_DMA_BURST    6       /* Maximum PCI burst, '6' is 1024 */
200 #define TX_RETRY        8       /* 0-15.  retries = 16 + (TX_RETRY * 16) */
201
202 /* Operational parameters that usually are not changed. */
203 /* Time in jiffies before concluding the transmitter is hung. */
204 #define TX_TIMEOUT  (6*HZ)
205
206
207 enum {
208         HAS_MII_XCVR = 0x010000,
209         HAS_CHIP_XCVR = 0x020000,
210         HAS_LNK_CHNG = 0x040000,
211 };
212
213 #define RTL_NUM_STATS 4         /* number of ETHTOOL_GSTATS u64's */
214 #define RTL_REGS_VER 1          /* version of reg. data in ETHTOOL_GREGS */
215 #define RTL_MIN_IO_SIZE 0x80
216 #define RTL8139B_IO_SIZE 256
217
218 #define RTL8129_CAPS    HAS_MII_XCVR
219 #define RTL8139_CAPS    (HAS_CHIP_XCVR|HAS_LNK_CHNG)
220
221 typedef enum {
222         RTL8139 = 0,
223         RTL8129,
224 } board_t;
225
226
227 /* indexed by board_t, above */
228 static const struct {
229         const char *name;
230         u32 hw_flags;
231 } board_info[] = {
232         { "RealTek RTL8139", RTL8139_CAPS },
233         { "RealTek RTL8129", RTL8129_CAPS },
234 };
235
236
237 static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
238         {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
239         {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
240         {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
241         {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
242         {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
243         {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
244         {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
245         {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
246         {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
247         {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
248         {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
249         {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
250         {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
251         {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
252         {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
253         {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
254         {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
255         {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
256         {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
257
258 #ifdef CONFIG_SH_SECUREEDGE5410
259         /* Bogus 8139 silicon reports 8129 without external PROM :-( */
260         {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
261 #endif
262 #ifdef CONFIG_8139TOO_8129
263         {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
264 #endif
265
266         /* some crazy cards report invalid vendor ids like
267          * 0x0001 here.  The other ids are valid and constant,
268          * so we simply don't match on the main vendor id.
269          */
270         {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
271         {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
272         {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
273
274         {0,}
275 };
276 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
277
278 static struct {
279         const char str[ETH_GSTRING_LEN];
280 } ethtool_stats_keys[] = {
281         { "early_rx" },
282         { "tx_buf_mapped" },
283         { "tx_timeouts" },
284         { "rx_lost_in_ring" },
285 };
286
287 /* The rest of these values should never change. */
288
289 /* Symbolic offsets to registers. */
290 enum RTL8139_registers {
291         MAC0            = 0,     /* Ethernet hardware address. */
292         MAR0            = 8,     /* Multicast filter. */
293         TxStatus0       = 0x10,  /* Transmit status (Four 32bit registers). */
294         TxAddr0         = 0x20,  /* Tx descriptors (also four 32bit). */
295         RxBuf           = 0x30,
296         ChipCmd         = 0x37,
297         RxBufPtr        = 0x38,
298         RxBufAddr       = 0x3A,
299         IntrMask        = 0x3C,
300         IntrStatus      = 0x3E,
301         TxConfig        = 0x40,
302         RxConfig        = 0x44,
303         Timer           = 0x48,  /* A general-purpose counter. */
304         RxMissed        = 0x4C,  /* 24 bits valid, write clears. */
305         Cfg9346         = 0x50,
306         Config0         = 0x51,
307         Config1         = 0x52,
308         TimerInt        = 0x54,
309         MediaStatus     = 0x58,
310         Config3         = 0x59,
311         Config4         = 0x5A,  /* absent on RTL-8139A */
312         HltClk          = 0x5B,
313         MultiIntr       = 0x5C,
314         TxSummary       = 0x60,
315         BasicModeCtrl   = 0x62,
316         BasicModeStatus = 0x64,
317         NWayAdvert      = 0x66,
318         NWayLPAR        = 0x68,
319         NWayExpansion   = 0x6A,
320         /* Undocumented registers, but required for proper operation. */
321         FIFOTMS         = 0x70,  /* FIFO Control and test. */
322         CSCR            = 0x74,  /* Chip Status and Configuration Register. */
323         PARA78          = 0x78,
324         FlashReg        = 0xD4, /* Communication with Flash ROM, four bytes. */
325         PARA7c          = 0x7c,  /* Magic transceiver parameter register. */
326         Config5         = 0xD8,  /* absent on RTL-8139A */
327 };
328
329 enum ClearBitMasks {
330         MultiIntrClear  = 0xF000,
331         ChipCmdClear    = 0xE2,
332         Config1Clear    = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
333 };
334
335 enum ChipCmdBits {
336         CmdReset        = 0x10,
337         CmdRxEnb        = 0x08,
338         CmdTxEnb        = 0x04,
339         RxBufEmpty      = 0x01,
340 };
341
342 /* Interrupt register bits, using my own meaningful names. */
343 enum IntrStatusBits {
344         PCIErr          = 0x8000,
345         PCSTimeout      = 0x4000,
346         RxFIFOOver      = 0x40,
347         RxUnderrun      = 0x20,
348         RxOverflow      = 0x10,
349         TxErr           = 0x08,
350         TxOK            = 0x04,
351         RxErr           = 0x02,
352         RxOK            = 0x01,
353
354         RxAckBits       = RxFIFOOver | RxOverflow | RxOK,
355 };
356
357 enum TxStatusBits {
358         TxHostOwns      = 0x2000,
359         TxUnderrun      = 0x4000,
360         TxStatOK        = 0x8000,
361         TxOutOfWindow   = 0x20000000,
362         TxAborted       = 0x40000000,
363         TxCarrierLost   = 0x80000000,
364 };
365 enum RxStatusBits {
366         RxMulticast     = 0x8000,
367         RxPhysical      = 0x4000,
368         RxBroadcast     = 0x2000,
369         RxBadSymbol     = 0x0020,
370         RxRunt          = 0x0010,
371         RxTooLong       = 0x0008,
372         RxCRCErr        = 0x0004,
373         RxBadAlign      = 0x0002,
374         RxStatusOK      = 0x0001,
375 };
376
377 /* Bits in RxConfig. */
378 enum rx_mode_bits {
379         AcceptErr       = 0x20,
380         AcceptRunt      = 0x10,
381         AcceptBroadcast = 0x08,
382         AcceptMulticast = 0x04,
383         AcceptMyPhys    = 0x02,
384         AcceptAllPhys   = 0x01,
385 };
386
387 /* Bits in TxConfig. */
388 enum tx_config_bits {
389         /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
390         TxIFGShift      = 24,
391         TxIFG84         = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
392         TxIFG88         = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
393         TxIFG92         = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
394         TxIFG96         = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
395
396         TxLoopBack      = (1 << 18) | (1 << 17), /* enable loopback test mode */
397         TxCRC           = (1 << 16),    /* DISABLE Tx pkt CRC append */
398         TxClearAbt      = (1 << 0),     /* Clear abort (WO) */
399         TxDMAShift      = 8, /* DMA burst value (0-7) is shifted X many bits */
400         TxRetryShift    = 4, /* TXRR value (0-15) is shifted X many bits */
401
402         TxVersionMask   = 0x7C800000, /* mask out version bits 30-26, 23 */
403 };
404
405 /* Bits in Config1 */
406 enum Config1Bits {
407         Cfg1_PM_Enable  = 0x01,
408         Cfg1_VPD_Enable = 0x02,
409         Cfg1_PIO        = 0x04,
410         Cfg1_MMIO       = 0x08,
411         LWAKE           = 0x10,         /* not on 8139, 8139A */
412         Cfg1_Driver_Load = 0x20,
413         Cfg1_LED0       = 0x40,
414         Cfg1_LED1       = 0x80,
415         SLEEP           = (1 << 1),     /* only on 8139, 8139A */
416         PWRDN           = (1 << 0),     /* only on 8139, 8139A */
417 };
418
419 /* Bits in Config3 */
420 enum Config3Bits {
421         Cfg3_FBtBEn     = (1 << 0), /* 1        = Fast Back to Back */
422         Cfg3_FuncRegEn  = (1 << 1), /* 1        = enable CardBus Function registers */
423         Cfg3_CLKRUN_En  = (1 << 2), /* 1        = enable CLKRUN */
424         Cfg3_CardB_En   = (1 << 3), /* 1        = enable CardBus registers */
425         Cfg3_LinkUp     = (1 << 4), /* 1        = wake up on link up */
426         Cfg3_Magic      = (1 << 5), /* 1        = wake up on Magic Packet (tm) */
427         Cfg3_PARM_En    = (1 << 6), /* 0        = software can set twister parameters */
428         Cfg3_GNTSel     = (1 << 7), /* 1        = delay 1 clock from PCI GNT signal */
429 };
430
431 /* Bits in Config4 */
432 enum Config4Bits {
433         LWPTN   = (1 << 2),     /* not on 8139, 8139A */
434 };
435
436 /* Bits in Config5 */
437 enum Config5Bits {
438         Cfg5_PME_STS    = (1 << 0), /* 1        = PCI reset resets PME_Status */
439         Cfg5_LANWake    = (1 << 1), /* 1        = enable LANWake signal */
440         Cfg5_LDPS       = (1 << 2), /* 0        = save power when link is down */
441         Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
442         Cfg5_UWF        = (1 << 4), /* 1 = accept unicast wakeup frame */
443         Cfg5_MWF        = (1 << 5), /* 1 = accept multicast wakeup frame */
444         Cfg5_BWF        = (1 << 6), /* 1 = accept broadcast wakeup frame */
445 };
446
447 enum RxConfigBits {
448         /* rx fifo threshold */
449         RxCfgFIFOShift  = 13,
450         RxCfgFIFONone   = (7 << RxCfgFIFOShift),
451
452         /* Max DMA burst */
453         RxCfgDMAShift   = 8,
454         RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
455
456         /* rx ring buffer length */
457         RxCfgRcv8K      = 0,
458         RxCfgRcv16K     = (1 << 11),
459         RxCfgRcv32K     = (1 << 12),
460         RxCfgRcv64K     = (1 << 11) | (1 << 12),
461
462         /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
463         RxNoWrap        = (1 << 7),
464 };
465
466 /* Twister tuning parameters from RealTek.
467    Completely undocumented, but required to tune bad links on some boards. */
468 enum CSCRBits {
469         CSCR_LinkOKBit          = 0x0400,
470         CSCR_LinkChangeBit      = 0x0800,
471         CSCR_LinkStatusBits     = 0x0f000,
472         CSCR_LinkDownOffCmd     = 0x003c0,
473         CSCR_LinkDownCmd        = 0x0f3c0,
474 };
475
476 enum Cfg9346Bits {
477         Cfg9346_Lock    = 0x00,
478         Cfg9346_Unlock  = 0xC0,
479 };
480
481 typedef enum {
482         CH_8139 = 0,
483         CH_8139_K,
484         CH_8139A,
485         CH_8139A_G,
486         CH_8139B,
487         CH_8130,
488         CH_8139C,
489         CH_8100,
490         CH_8100B_8139D,
491         CH_8101,
492 } chip_t;
493
494 enum chip_flags {
495         HasHltClk       = (1 << 0),
496         HasLWake        = (1 << 1),
497 };
498
499 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
500         (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
501 #define HW_REVID_MASK   HW_REVID(1, 1, 1, 1, 1, 1, 1)
502
503 /* directly indexed by chip_t, above */
504 static const struct {
505         const char *name;
506         u32 version; /* from RTL8139C/RTL8139D docs */
507         u32 flags;
508 } rtl_chip_info[] = {
509         { "RTL-8139",
510           HW_REVID(1, 0, 0, 0, 0, 0, 0),
511           HasHltClk,
512         },
513
514         { "RTL-8139 rev K",
515           HW_REVID(1, 1, 0, 0, 0, 0, 0),
516           HasHltClk,
517         },
518
519         { "RTL-8139A",
520           HW_REVID(1, 1, 1, 0, 0, 0, 0),
521           HasHltClk, /* XXX undocumented? */
522         },
523
524         { "RTL-8139A rev G",
525           HW_REVID(1, 1, 1, 0, 0, 1, 0),
526           HasHltClk, /* XXX undocumented? */
527         },
528
529         { "RTL-8139B",
530           HW_REVID(1, 1, 1, 1, 0, 0, 0),
531           HasLWake,
532         },
533
534         { "RTL-8130",
535           HW_REVID(1, 1, 1, 1, 1, 0, 0),
536           HasLWake,
537         },
538
539         { "RTL-8139C",
540           HW_REVID(1, 1, 1, 0, 1, 0, 0),
541           HasLWake,
542         },
543
544         { "RTL-8100",
545           HW_REVID(1, 1, 1, 1, 0, 1, 0),
546           HasLWake,
547         },
548
549         { "RTL-8100B/8139D",
550           HW_REVID(1, 1, 1, 0, 1, 0, 1),
551           HasHltClk /* XXX undocumented? */
552         | HasLWake,
553         },
554
555         { "RTL-8101",
556           HW_REVID(1, 1, 1, 0, 1, 1, 1),
557           HasLWake,
558         },
559 };
560
561 struct rtl_extra_stats {
562         unsigned long early_rx;
563         unsigned long tx_buf_mapped;
564         unsigned long tx_timeouts;
565         unsigned long rx_lost_in_ring;
566 };
567
568 struct rtl8139_stats {
569         u64     packets;
570         u64     bytes;
571         struct u64_stats_sync   syncp;
572 };
573
574 struct rtl8139_private {
575         void __iomem            *mmio_addr;
576         int                     drv_flags;
577         struct pci_dev          *pci_dev;
578         u32                     msg_enable;
579         struct napi_struct      napi;
580         struct net_device       *dev;
581
582         unsigned char           *rx_ring;
583         unsigned int            cur_rx; /* RX buf index of next pkt */
584         struct rtl8139_stats    rx_stats;
585         dma_addr_t              rx_ring_dma;
586
587         unsigned int            tx_flag;
588         unsigned long           cur_tx;
589         unsigned long           dirty_tx;
590         struct rtl8139_stats    tx_stats;
591         unsigned char           *tx_buf[NUM_TX_DESC];   /* Tx bounce buffers */
592         unsigned char           *tx_bufs;       /* Tx bounce buffer region. */
593         dma_addr_t              tx_bufs_dma;
594
595         signed char             phys[4];        /* MII device addresses. */
596
597                                 /* Twister tune state. */
598         char                    twistie, twist_row, twist_col;
599
600         unsigned int            watchdog_fired : 1;
601         unsigned int            default_port : 4; /* Last dev->if_port value. */
602         unsigned int            have_thread : 1;
603
604         spinlock_t              lock;
605         spinlock_t              rx_lock;
606
607         chip_t                  chipset;
608         u32                     rx_config;
609         struct rtl_extra_stats  xstats;
610
611         struct delayed_work     thread;
612
613         struct mii_if_info      mii;
614         unsigned int            regs_len;
615         unsigned long           fifo_copy_timeout;
616 };
617
618 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
619 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
620 MODULE_LICENSE("GPL");
621 MODULE_VERSION(DRV_VERSION);
622
623 module_param(use_io, bool, 0);
624 MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
625 module_param(multicast_filter_limit, int, 0);
626 module_param_array(media, int, NULL, 0);
627 module_param_array(full_duplex, int, NULL, 0);
628 module_param(debug, int, 0);
629 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
630 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
631 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
632 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
633
634 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
635 static int rtl8139_open (struct net_device *dev);
636 static int mdio_read (struct net_device *dev, int phy_id, int location);
637 static void mdio_write (struct net_device *dev, int phy_id, int location,
638                         int val);
639 static void rtl8139_start_thread(struct rtl8139_private *tp);
640 static void rtl8139_tx_timeout (struct net_device *dev);
641 static void rtl8139_init_ring (struct net_device *dev);
642 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
643                                        struct net_device *dev);
644 #ifdef CONFIG_NET_POLL_CONTROLLER
645 static void rtl8139_poll_controller(struct net_device *dev);
646 #endif
647 static int rtl8139_set_mac_address(struct net_device *dev, void *p);
648 static int rtl8139_poll(struct napi_struct *napi, int budget);
649 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
650 static int rtl8139_close (struct net_device *dev);
651 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
652 static struct rtnl_link_stats64 *rtl8139_get_stats64(struct net_device *dev,
653                                                     struct rtnl_link_stats64
654                                                     *stats);
655 static void rtl8139_set_rx_mode (struct net_device *dev);
656 static void __set_rx_mode (struct net_device *dev);
657 static void rtl8139_hw_start (struct net_device *dev);
658 static void rtl8139_thread (struct work_struct *work);
659 static void rtl8139_tx_timeout_task(struct work_struct *work);
660 static const struct ethtool_ops rtl8139_ethtool_ops;
661
662 /* write MMIO register, with flush */
663 /* Flush avoids rtl8139 bug w/ posted MMIO writes */
664 #define RTL_W8_F(reg, val8)     do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
665 #define RTL_W16_F(reg, val16)   do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
666 #define RTL_W32_F(reg, val32)   do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
667
668 /* write MMIO register */
669 #define RTL_W8(reg, val8)       iowrite8 ((val8), ioaddr + (reg))
670 #define RTL_W16(reg, val16)     iowrite16 ((val16), ioaddr + (reg))
671 #define RTL_W32(reg, val32)     iowrite32 ((val32), ioaddr + (reg))
672
673 /* read MMIO register */
674 #define RTL_R8(reg)             ioread8 (ioaddr + (reg))
675 #define RTL_R16(reg)            ioread16 (ioaddr + (reg))
676 #define RTL_R32(reg)            ioread32 (ioaddr + (reg))
677
678
679 static const u16 rtl8139_intr_mask =
680         PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
681         TxErr | TxOK | RxErr | RxOK;
682
683 static const u16 rtl8139_norx_intr_mask =
684         PCIErr | PCSTimeout | RxUnderrun |
685         TxErr | TxOK | RxErr ;
686
687 #if RX_BUF_IDX == 0
688 static const unsigned int rtl8139_rx_config =
689         RxCfgRcv8K | RxNoWrap |
690         (RX_FIFO_THRESH << RxCfgFIFOShift) |
691         (RX_DMA_BURST << RxCfgDMAShift);
692 #elif RX_BUF_IDX == 1
693 static const unsigned int rtl8139_rx_config =
694         RxCfgRcv16K | RxNoWrap |
695         (RX_FIFO_THRESH << RxCfgFIFOShift) |
696         (RX_DMA_BURST << RxCfgDMAShift);
697 #elif RX_BUF_IDX == 2
698 static const unsigned int rtl8139_rx_config =
699         RxCfgRcv32K | RxNoWrap |
700         (RX_FIFO_THRESH << RxCfgFIFOShift) |
701         (RX_DMA_BURST << RxCfgDMAShift);
702 #elif RX_BUF_IDX == 3
703 static const unsigned int rtl8139_rx_config =
704         RxCfgRcv64K |
705         (RX_FIFO_THRESH << RxCfgFIFOShift) |
706         (RX_DMA_BURST << RxCfgDMAShift);
707 #else
708 #error "Invalid configuration for 8139_RXBUF_IDX"
709 #endif
710
711 static const unsigned int rtl8139_tx_config =
712         TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
713
714 static void __rtl8139_cleanup_dev (struct net_device *dev)
715 {
716         struct rtl8139_private *tp = netdev_priv(dev);
717         struct pci_dev *pdev;
718
719         assert (dev != NULL);
720         assert (tp->pci_dev != NULL);
721         pdev = tp->pci_dev;
722
723         if (tp->mmio_addr)
724                 pci_iounmap (pdev, tp->mmio_addr);
725
726         /* it's ok to call this even if we have no regions to free */
727         pci_release_regions (pdev);
728
729         free_netdev(dev);
730         pci_set_drvdata (pdev, NULL);
731 }
732
733
734 static void rtl8139_chip_reset (void __iomem *ioaddr)
735 {
736         int i;
737
738         /* Soft reset the chip. */
739         RTL_W8 (ChipCmd, CmdReset);
740
741         /* Check that the chip has finished the reset. */
742         for (i = 1000; i > 0; i--) {
743                 barrier();
744                 if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
745                         break;
746                 udelay (10);
747         }
748 }
749
750
751 static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
752 {
753         struct device *d = &pdev->dev;
754         void __iomem *ioaddr;
755         struct net_device *dev;
756         struct rtl8139_private *tp;
757         u8 tmp8;
758         int rc, disable_dev_on_err = 0;
759         unsigned int i, bar;
760         unsigned long io_len;
761         u32 version;
762         static const struct {
763                 unsigned long mask;
764                 char *type;
765         } res[] = {
766                 { IORESOURCE_IO,  "PIO" },
767                 { IORESOURCE_MEM, "MMIO" }
768         };
769
770         assert (pdev != NULL);
771
772         /* dev and priv zeroed in alloc_etherdev */
773         dev = alloc_etherdev (sizeof (*tp));
774         if (dev == NULL)
775                 return ERR_PTR(-ENOMEM);
776
777         SET_NETDEV_DEV(dev, &pdev->dev);
778
779         tp = netdev_priv(dev);
780         tp->pci_dev = pdev;
781
782         /* enable device (incl. PCI PM wakeup and hotplug setup) */
783         rc = pci_enable_device (pdev);
784         if (rc)
785                 goto err_out;
786
787         rc = pci_request_regions (pdev, DRV_NAME);
788         if (rc)
789                 goto err_out;
790         disable_dev_on_err = 1;
791
792         pci_set_master (pdev);
793
794 retry:
795         /* PIO bar register comes first. */
796         bar = !use_io;
797
798         io_len = pci_resource_len(pdev, bar);
799
800         dev_dbg(d, "%s region size = 0x%02lX\n", res[bar].type, io_len);
801
802         if (!(pci_resource_flags(pdev, bar) & res[bar].mask)) {
803                 dev_err(d, "region #%d not a %s resource, aborting\n", bar,
804                         res[bar].type);
805                 rc = -ENODEV;
806                 goto err_out;
807         }
808         if (io_len < RTL_MIN_IO_SIZE) {
809                 dev_err(d, "Invalid PCI %s region size(s), aborting\n",
810                         res[bar].type);
811                 rc = -ENODEV;
812                 goto err_out;
813         }
814
815         ioaddr = pci_iomap(pdev, bar, 0);
816         if (!ioaddr) {
817                 dev_err(d, "cannot map %s\n", res[bar].type);
818                 if (!use_io) {
819                         use_io = true;
820                         goto retry;
821                 }
822                 rc = -ENODEV;
823                 goto err_out;
824         }
825         tp->regs_len = io_len;
826         tp->mmio_addr = ioaddr;
827
828         /* Bring old chips out of low-power mode. */
829         RTL_W8 (HltClk, 'R');
830
831         /* check for missing/broken hardware */
832         if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
833                 dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
834                 rc = -EIO;
835                 goto err_out;
836         }
837
838         /* identify chip attached to board */
839         version = RTL_R32 (TxConfig) & HW_REVID_MASK;
840         for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
841                 if (version == rtl_chip_info[i].version) {
842                         tp->chipset = i;
843                         goto match;
844                 }
845
846         /* if unknown chip, assume array element #0, original RTL-8139 in this case */
847         i = 0;
848         dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
849         dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig));
850         tp->chipset = 0;
851
852 match:
853         pr_debug("chipset id (%d) == index %d, '%s'\n",
854                  version, i, rtl_chip_info[i].name);
855
856         if (tp->chipset >= CH_8139B) {
857                 u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
858                 pr_debug("PCI PM wakeup\n");
859                 if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
860                     (tmp8 & LWAKE))
861                         new_tmp8 &= ~LWAKE;
862                 new_tmp8 |= Cfg1_PM_Enable;
863                 if (new_tmp8 != tmp8) {
864                         RTL_W8 (Cfg9346, Cfg9346_Unlock);
865                         RTL_W8 (Config1, tmp8);
866                         RTL_W8 (Cfg9346, Cfg9346_Lock);
867                 }
868                 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
869                         tmp8 = RTL_R8 (Config4);
870                         if (tmp8 & LWPTN) {
871                                 RTL_W8 (Cfg9346, Cfg9346_Unlock);
872                                 RTL_W8 (Config4, tmp8 & ~LWPTN);
873                                 RTL_W8 (Cfg9346, Cfg9346_Lock);
874                         }
875                 }
876         } else {
877                 pr_debug("Old chip wakeup\n");
878                 tmp8 = RTL_R8 (Config1);
879                 tmp8 &= ~(SLEEP | PWRDN);
880                 RTL_W8 (Config1, tmp8);
881         }
882
883         rtl8139_chip_reset (ioaddr);
884
885         return dev;
886
887 err_out:
888         __rtl8139_cleanup_dev (dev);
889         if (disable_dev_on_err)
890                 pci_disable_device (pdev);
891         return ERR_PTR(rc);
892 }
893
894 static int rtl8139_set_features(struct net_device *dev, netdev_features_t features)
895 {
896         struct rtl8139_private *tp = netdev_priv(dev);
897         unsigned long flags;
898         netdev_features_t changed = features ^ dev->features;
899         void __iomem *ioaddr = tp->mmio_addr;
900
901         if (!(changed & (NETIF_F_RXALL)))
902                 return 0;
903
904         spin_lock_irqsave(&tp->lock, flags);
905
906         if (changed & NETIF_F_RXALL) {
907                 int rx_mode = tp->rx_config;
908                 if (features & NETIF_F_RXALL)
909                         rx_mode |= (AcceptErr | AcceptRunt);
910                 else
911                         rx_mode &= ~(AcceptErr | AcceptRunt);
912                 tp->rx_config = rtl8139_rx_config | rx_mode;
913                 RTL_W32_F(RxConfig, tp->rx_config);
914         }
915
916         spin_unlock_irqrestore(&tp->lock, flags);
917
918         return 0;
919 }
920
921 static const struct net_device_ops rtl8139_netdev_ops = {
922         .ndo_open               = rtl8139_open,
923         .ndo_stop               = rtl8139_close,
924         .ndo_get_stats64        = rtl8139_get_stats64,
925         .ndo_change_mtu         = eth_change_mtu,
926         .ndo_validate_addr      = eth_validate_addr,
927         .ndo_set_mac_address    = rtl8139_set_mac_address,
928         .ndo_start_xmit         = rtl8139_start_xmit,
929         .ndo_set_rx_mode        = rtl8139_set_rx_mode,
930         .ndo_do_ioctl           = netdev_ioctl,
931         .ndo_tx_timeout         = rtl8139_tx_timeout,
932 #ifdef CONFIG_NET_POLL_CONTROLLER
933         .ndo_poll_controller    = rtl8139_poll_controller,
934 #endif
935         .ndo_set_features       = rtl8139_set_features,
936 };
937
938 static int rtl8139_init_one(struct pci_dev *pdev,
939                             const struct pci_device_id *ent)
940 {
941         struct net_device *dev = NULL;
942         struct rtl8139_private *tp;
943         int i, addr_len, option;
944         void __iomem *ioaddr;
945         static int board_idx = -1;
946
947         assert (pdev != NULL);
948         assert (ent != NULL);
949
950         board_idx++;
951
952         /* when we're built into the kernel, the driver version message
953          * is only printed if at least one 8139 board has been found
954          */
955 #ifndef MODULE
956         {
957                 static int printed_version;
958                 if (!printed_version++)
959                         pr_info(RTL8139_DRIVER_NAME "\n");
960         }
961 #endif
962
963         if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
964             pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
965                 dev_info(&pdev->dev,
966                            "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
967                            pdev->vendor, pdev->device, pdev->revision);
968                 return -ENODEV;
969         }
970
971         if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
972             pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
973             pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
974             pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
975                 pr_info("OQO Model 2 detected. Forcing PIO\n");
976                 use_io = 1;
977         }
978
979         dev = rtl8139_init_board (pdev);
980         if (IS_ERR(dev))
981                 return PTR_ERR(dev);
982
983         assert (dev != NULL);
984         tp = netdev_priv(dev);
985         tp->dev = dev;
986
987         ioaddr = tp->mmio_addr;
988         assert (ioaddr != NULL);
989
990         addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
991         for (i = 0; i < 3; i++)
992                 ((__le16 *) (dev->dev_addr))[i] =
993                     cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
994
995         /* The Rtl8139-specific entries in the device structure. */
996         dev->netdev_ops = &rtl8139_netdev_ops;
997         dev->ethtool_ops = &rtl8139_ethtool_ops;
998         dev->watchdog_timeo = TX_TIMEOUT;
999         netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
1000
1001         /* note: the hardware is not capable of sg/csum/highdma, however
1002          * through the use of skb_copy_and_csum_dev we enable these
1003          * features
1004          */
1005         dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
1006         dev->vlan_features = dev->features;
1007
1008         dev->hw_features |= NETIF_F_RXALL;
1009         dev->hw_features |= NETIF_F_RXFCS;
1010
1011         /* tp zeroed and aligned in alloc_etherdev */
1012         tp = netdev_priv(dev);
1013
1014         /* note: tp->chipset set in rtl8139_init_board */
1015         tp->drv_flags = board_info[ent->driver_data].hw_flags;
1016         tp->mmio_addr = ioaddr;
1017         tp->msg_enable =
1018                 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
1019         spin_lock_init (&tp->lock);
1020         spin_lock_init (&tp->rx_lock);
1021         INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1022         tp->mii.dev = dev;
1023         tp->mii.mdio_read = mdio_read;
1024         tp->mii.mdio_write = mdio_write;
1025         tp->mii.phy_id_mask = 0x3f;
1026         tp->mii.reg_num_mask = 0x1f;
1027
1028         /* dev is fully set up and ready to use now */
1029         pr_debug("about to register device named %s (%p)...\n",
1030                  dev->name, dev);
1031         i = register_netdev (dev);
1032         if (i) goto err_out;
1033
1034         pci_set_drvdata (pdev, dev);
1035
1036         netdev_info(dev, "%s at 0x%p, %pM, IRQ %d\n",
1037                     board_info[ent->driver_data].name,
1038                     ioaddr, dev->dev_addr, pdev->irq);
1039
1040         netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
1041                    rtl_chip_info[tp->chipset].name);
1042
1043         /* Find the connected MII xcvrs.
1044            Doing this in open() would allow detecting external xcvrs later, but
1045            takes too much time. */
1046 #ifdef CONFIG_8139TOO_8129
1047         if (tp->drv_flags & HAS_MII_XCVR) {
1048                 int phy, phy_idx = 0;
1049                 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
1050                         int mii_status = mdio_read(dev, phy, 1);
1051                         if (mii_status != 0xffff  &&  mii_status != 0x0000) {
1052                                 u16 advertising = mdio_read(dev, phy, 4);
1053                                 tp->phys[phy_idx++] = phy;
1054                                 netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
1055                                             phy, mii_status, advertising);
1056                         }
1057                 }
1058                 if (phy_idx == 0) {
1059                         netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
1060                         tp->phys[0] = 32;
1061                 }
1062         } else
1063 #endif
1064                 tp->phys[0] = 32;
1065         tp->mii.phy_id = tp->phys[0];
1066
1067         /* The lower four bits are the media type. */
1068         option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1069         if (option > 0) {
1070                 tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
1071                 tp->default_port = option & 0xFF;
1072                 if (tp->default_port)
1073                         tp->mii.force_media = 1;
1074         }
1075         if (board_idx < MAX_UNITS  &&  full_duplex[board_idx] > 0)
1076                 tp->mii.full_duplex = full_duplex[board_idx];
1077         if (tp->mii.full_duplex) {
1078                 netdev_info(dev, "Media type forced to Full Duplex\n");
1079                 /* Changing the MII-advertised media because might prevent
1080                    re-connection. */
1081                 tp->mii.force_media = 1;
1082         }
1083         if (tp->default_port) {
1084                 netdev_info(dev, "  Forcing %dMbps %s-duplex operation\n",
1085                             (option & 0x20 ? 100 : 10),
1086                             (option & 0x10 ? "full" : "half"));
1087                 mdio_write(dev, tp->phys[0], 0,
1088                                    ((option & 0x20) ? 0x2000 : 0) |     /* 100Mbps? */
1089                                    ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
1090         }
1091
1092         /* Put the chip into low-power mode. */
1093         if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1094                 RTL_W8 (HltClk, 'H');   /* 'R' would leave the clock running. */
1095
1096         return 0;
1097
1098 err_out:
1099         __rtl8139_cleanup_dev (dev);
1100         pci_disable_device (pdev);
1101         return i;
1102 }
1103
1104
1105 static void rtl8139_remove_one(struct pci_dev *pdev)
1106 {
1107         struct net_device *dev = pci_get_drvdata (pdev);
1108         struct rtl8139_private *tp = netdev_priv(dev);
1109
1110         assert (dev != NULL);
1111
1112         cancel_delayed_work_sync(&tp->thread);
1113
1114         unregister_netdev (dev);
1115
1116         __rtl8139_cleanup_dev (dev);
1117         pci_disable_device (pdev);
1118 }
1119
1120
1121 /* Serial EEPROM section. */
1122
1123 /*  EEPROM_Ctrl bits. */
1124 #define EE_SHIFT_CLK    0x04    /* EEPROM shift clock. */
1125 #define EE_CS                   0x08    /* EEPROM chip select. */
1126 #define EE_DATA_WRITE   0x02    /* EEPROM chip data in. */
1127 #define EE_WRITE_0              0x00
1128 #define EE_WRITE_1              0x02
1129 #define EE_DATA_READ    0x01    /* EEPROM chip data out. */
1130 #define EE_ENB                  (0x80 | EE_CS)
1131
1132 /* Delay between EEPROM clock transitions.
1133    No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
1134  */
1135
1136 #define eeprom_delay()  (void)RTL_R8(Cfg9346)
1137
1138 /* The EEPROM commands include the alway-set leading bit. */
1139 #define EE_WRITE_CMD    (5)
1140 #define EE_READ_CMD             (6)
1141 #define EE_ERASE_CMD    (7)
1142
1143 static int read_eeprom(void __iomem *ioaddr, int location, int addr_len)
1144 {
1145         int i;
1146         unsigned retval = 0;
1147         int read_cmd = location | (EE_READ_CMD << addr_len);
1148
1149         RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
1150         RTL_W8 (Cfg9346, EE_ENB);
1151         eeprom_delay ();
1152
1153         /* Shift the read command bits out. */
1154         for (i = 4 + addr_len; i >= 0; i--) {
1155                 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
1156                 RTL_W8 (Cfg9346, EE_ENB | dataval);
1157                 eeprom_delay ();
1158                 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
1159                 eeprom_delay ();
1160         }
1161         RTL_W8 (Cfg9346, EE_ENB);
1162         eeprom_delay ();
1163
1164         for (i = 16; i > 0; i--) {
1165                 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
1166                 eeprom_delay ();
1167                 retval =
1168                     (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
1169                                      0);
1170                 RTL_W8 (Cfg9346, EE_ENB);
1171                 eeprom_delay ();
1172         }
1173
1174         /* Terminate the EEPROM access. */
1175         RTL_W8(Cfg9346, 0);
1176         eeprom_delay ();
1177
1178         return retval;
1179 }
1180
1181 /* MII serial management: mostly bogus for now. */
1182 /* Read and write the MII management registers using software-generated
1183    serial MDIO protocol.
1184    The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
1185    met by back-to-back PCI I/O cycles, but we insert a delay to avoid
1186    "overclocking" issues. */
1187 #define MDIO_DIR                0x80
1188 #define MDIO_DATA_OUT   0x04
1189 #define MDIO_DATA_IN    0x02
1190 #define MDIO_CLK                0x01
1191 #define MDIO_WRITE0 (MDIO_DIR)
1192 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
1193
1194 #define mdio_delay()    RTL_R8(Config4)
1195
1196
1197 static const char mii_2_8139_map[8] = {
1198         BasicModeCtrl,
1199         BasicModeStatus,
1200         0,
1201         0,
1202         NWayAdvert,
1203         NWayLPAR,
1204         NWayExpansion,
1205         0
1206 };
1207
1208
1209 #ifdef CONFIG_8139TOO_8129
1210 /* Syncronize the MII management interface by shifting 32 one bits out. */
1211 static void mdio_sync (void __iomem *ioaddr)
1212 {
1213         int i;
1214
1215         for (i = 32; i >= 0; i--) {
1216                 RTL_W8 (Config4, MDIO_WRITE1);
1217                 mdio_delay ();
1218                 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
1219                 mdio_delay ();
1220         }
1221 }
1222 #endif
1223
1224 static int mdio_read (struct net_device *dev, int phy_id, int location)
1225 {
1226         struct rtl8139_private *tp = netdev_priv(dev);
1227         int retval = 0;
1228 #ifdef CONFIG_8139TOO_8129
1229         void __iomem *ioaddr = tp->mmio_addr;
1230         int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
1231         int i;
1232 #endif
1233
1234         if (phy_id > 31) {      /* Really a 8139.  Use internal registers. */
1235                 void __iomem *ioaddr = tp->mmio_addr;
1236                 return location < 8 && mii_2_8139_map[location] ?
1237                     RTL_R16 (mii_2_8139_map[location]) : 0;
1238         }
1239
1240 #ifdef CONFIG_8139TOO_8129
1241         mdio_sync (ioaddr);
1242         /* Shift the read command bits out. */
1243         for (i = 15; i >= 0; i--) {
1244                 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
1245
1246                 RTL_W8 (Config4, MDIO_DIR | dataval);
1247                 mdio_delay ();
1248                 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
1249                 mdio_delay ();
1250         }
1251
1252         /* Read the two transition, 16 data, and wire-idle bits. */
1253         for (i = 19; i > 0; i--) {
1254                 RTL_W8 (Config4, 0);
1255                 mdio_delay ();
1256                 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
1257                 RTL_W8 (Config4, MDIO_CLK);
1258                 mdio_delay ();
1259         }
1260 #endif
1261
1262         return (retval >> 1) & 0xffff;
1263 }
1264
1265
1266 static void mdio_write (struct net_device *dev, int phy_id, int location,
1267                         int value)
1268 {
1269         struct rtl8139_private *tp = netdev_priv(dev);
1270 #ifdef CONFIG_8139TOO_8129
1271         void __iomem *ioaddr = tp->mmio_addr;
1272         int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
1273         int i;
1274 #endif
1275
1276         if (phy_id > 31) {      /* Really a 8139.  Use internal registers. */
1277                 void __iomem *ioaddr = tp->mmio_addr;
1278                 if (location == 0) {
1279                         RTL_W8 (Cfg9346, Cfg9346_Unlock);
1280                         RTL_W16 (BasicModeCtrl, value);
1281                         RTL_W8 (Cfg9346, Cfg9346_Lock);
1282                 } else if (location < 8 && mii_2_8139_map[location])
1283                         RTL_W16 (mii_2_8139_map[location], value);
1284                 return;
1285         }
1286
1287 #ifdef CONFIG_8139TOO_8129
1288         mdio_sync (ioaddr);
1289
1290         /* Shift the command bits out. */
1291         for (i = 31; i >= 0; i--) {
1292                 int dataval =
1293                     (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
1294                 RTL_W8 (Config4, dataval);
1295                 mdio_delay ();
1296                 RTL_W8 (Config4, dataval | MDIO_CLK);
1297                 mdio_delay ();
1298         }
1299         /* Clear out extra bits. */
1300         for (i = 2; i > 0; i--) {
1301                 RTL_W8 (Config4, 0);
1302                 mdio_delay ();
1303                 RTL_W8 (Config4, MDIO_CLK);
1304                 mdio_delay ();
1305         }
1306 #endif
1307 }
1308
1309
1310 static int rtl8139_open (struct net_device *dev)
1311 {
1312         struct rtl8139_private *tp = netdev_priv(dev);
1313         void __iomem *ioaddr = tp->mmio_addr;
1314         const int irq = tp->pci_dev->irq;
1315         int retval;
1316
1317         retval = request_irq(irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
1318         if (retval)
1319                 return retval;
1320
1321         tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1322                                            &tp->tx_bufs_dma, GFP_KERNEL);
1323         tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1324                                            &tp->rx_ring_dma, GFP_KERNEL);
1325         if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
1326                 free_irq(irq, dev);
1327
1328                 if (tp->tx_bufs)
1329                         dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1330                                             tp->tx_bufs, tp->tx_bufs_dma);
1331                 if (tp->rx_ring)
1332                         dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1333                                             tp->rx_ring, tp->rx_ring_dma);
1334
1335                 return -ENOMEM;
1336
1337         }
1338
1339         napi_enable(&tp->napi);
1340
1341         tp->mii.full_duplex = tp->mii.force_media;
1342         tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
1343
1344         rtl8139_init_ring (dev);
1345         rtl8139_hw_start (dev);
1346         netif_start_queue (dev);
1347
1348         netif_dbg(tp, ifup, dev,
1349                   "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
1350                   __func__,
1351                   (unsigned long long)pci_resource_start (tp->pci_dev, 1),
1352                   irq, RTL_R8 (MediaStatus),
1353                   tp->mii.full_duplex ? "full" : "half");
1354
1355         rtl8139_start_thread(tp);
1356
1357         return 0;
1358 }
1359
1360
1361 static void rtl_check_media (struct net_device *dev, unsigned int init_media)
1362 {
1363         struct rtl8139_private *tp = netdev_priv(dev);
1364
1365         if (tp->phys[0] >= 0) {
1366                 mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
1367         }
1368 }
1369
1370 /* Start the hardware at open or resume. */
1371 static void rtl8139_hw_start (struct net_device *dev)
1372 {
1373         struct rtl8139_private *tp = netdev_priv(dev);
1374         void __iomem *ioaddr = tp->mmio_addr;
1375         u32 i;
1376         u8 tmp;
1377
1378         /* Bring old chips out of low-power mode. */
1379         if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1380                 RTL_W8 (HltClk, 'R');
1381
1382         rtl8139_chip_reset (ioaddr);
1383
1384         /* unlock Config[01234] and BMCR register writes */
1385         RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1386         /* Restore our idea of the MAC address. */
1387         RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
1388         RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
1389
1390         tp->cur_rx = 0;
1391
1392         /* init Rx ring buffer DMA address */
1393         RTL_W32_F (RxBuf, tp->rx_ring_dma);
1394
1395         /* Must enable Tx/Rx before setting transfer thresholds! */
1396         RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1397
1398         tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1399         RTL_W32 (RxConfig, tp->rx_config);
1400         RTL_W32 (TxConfig, rtl8139_tx_config);
1401
1402         rtl_check_media (dev, 1);
1403
1404         if (tp->chipset >= CH_8139B) {
1405                 /* Disable magic packet scanning, which is enabled
1406                  * when PM is enabled in Config1.  It can be reenabled
1407                  * via ETHTOOL_SWOL if desired.  */
1408                 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
1409         }
1410
1411         netdev_dbg(dev, "init buffer addresses\n");
1412
1413         /* Lock Config[01234] and BMCR register writes */
1414         RTL_W8 (Cfg9346, Cfg9346_Lock);
1415
1416         /* init Tx buffer DMA addresses */
1417         for (i = 0; i < NUM_TX_DESC; i++)
1418                 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
1419
1420         RTL_W32 (RxMissed, 0);
1421
1422         rtl8139_set_rx_mode (dev);
1423
1424         /* no early-rx interrupts */
1425         RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
1426
1427         /* make sure RxTx has started */
1428         tmp = RTL_R8 (ChipCmd);
1429         if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
1430                 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1431
1432         /* Enable all known interrupts by setting the interrupt mask. */
1433         RTL_W16 (IntrMask, rtl8139_intr_mask);
1434 }
1435
1436
1437 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1438 static void rtl8139_init_ring (struct net_device *dev)
1439 {
1440         struct rtl8139_private *tp = netdev_priv(dev);
1441         int i;
1442
1443         tp->cur_rx = 0;
1444         tp->cur_tx = 0;
1445         tp->dirty_tx = 0;
1446
1447         for (i = 0; i < NUM_TX_DESC; i++)
1448                 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
1449 }
1450
1451
1452 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
1453 static int next_tick = 3 * HZ;
1454
1455 #ifndef CONFIG_8139TOO_TUNE_TWISTER
1456 static inline void rtl8139_tune_twister (struct net_device *dev,
1457                                   struct rtl8139_private *tp) {}
1458 #else
1459 enum TwisterParamVals {
1460         PARA78_default  = 0x78fa8388,
1461         PARA7c_default  = 0xcb38de43,   /* param[0][3] */
1462         PARA7c_xxx      = 0xcb38de43,
1463 };
1464
1465 static const unsigned long param[4][4] = {
1466         {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
1467         {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1468         {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1469         {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
1470 };
1471
1472 static void rtl8139_tune_twister (struct net_device *dev,
1473                                   struct rtl8139_private *tp)
1474 {
1475         int linkcase;
1476         void __iomem *ioaddr = tp->mmio_addr;
1477
1478         /* This is a complicated state machine to configure the "twister" for
1479            impedance/echos based on the cable length.
1480            All of this is magic and undocumented.
1481          */
1482         switch (tp->twistie) {
1483         case 1:
1484                 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
1485                         /* We have link beat, let us tune the twister. */
1486                         RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
1487                         tp->twistie = 2;        /* Change to state 2. */
1488                         next_tick = HZ / 10;
1489                 } else {
1490                         /* Just put in some reasonable defaults for when beat returns. */
1491                         RTL_W16 (CSCR, CSCR_LinkDownCmd);
1492                         RTL_W32 (FIFOTMS, 0x20);        /* Turn on cable test mode. */
1493                         RTL_W32 (PARA78, PARA78_default);
1494                         RTL_W32 (PARA7c, PARA7c_default);
1495                         tp->twistie = 0;        /* Bail from future actions. */
1496                 }
1497                 break;
1498         case 2:
1499                 /* Read how long it took to hear the echo. */
1500                 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
1501                 if (linkcase == 0x7000)
1502                         tp->twist_row = 3;
1503                 else if (linkcase == 0x3000)
1504                         tp->twist_row = 2;
1505                 else if (linkcase == 0x1000)
1506                         tp->twist_row = 1;
1507                 else
1508                         tp->twist_row = 0;
1509                 tp->twist_col = 0;
1510                 tp->twistie = 3;        /* Change to state 2. */
1511                 next_tick = HZ / 10;
1512                 break;
1513         case 3:
1514                 /* Put out four tuning parameters, one per 100msec. */
1515                 if (tp->twist_col == 0)
1516                         RTL_W16 (FIFOTMS, 0);
1517                 RTL_W32 (PARA7c, param[(int) tp->twist_row]
1518                          [(int) tp->twist_col]);
1519                 next_tick = HZ / 10;
1520                 if (++tp->twist_col >= 4) {
1521                         /* For short cables we are done.
1522                            For long cables (row == 3) check for mistune. */
1523                         tp->twistie =
1524                             (tp->twist_row == 3) ? 4 : 0;
1525                 }
1526                 break;
1527         case 4:
1528                 /* Special case for long cables: check for mistune. */
1529                 if ((RTL_R16 (CSCR) &
1530                      CSCR_LinkStatusBits) == 0x7000) {
1531                         tp->twistie = 0;
1532                         break;
1533                 } else {
1534                         RTL_W32 (PARA7c, 0xfb38de03);
1535                         tp->twistie = 5;
1536                         next_tick = HZ / 10;
1537                 }
1538                 break;
1539         case 5:
1540                 /* Retune for shorter cable (column 2). */
1541                 RTL_W32 (FIFOTMS, 0x20);
1542                 RTL_W32 (PARA78, PARA78_default);
1543                 RTL_W32 (PARA7c, PARA7c_default);
1544                 RTL_W32 (FIFOTMS, 0x00);
1545                 tp->twist_row = 2;
1546                 tp->twist_col = 0;
1547                 tp->twistie = 3;
1548                 next_tick = HZ / 10;
1549                 break;
1550
1551         default:
1552                 /* do nothing */
1553                 break;
1554         }
1555 }
1556 #endif /* CONFIG_8139TOO_TUNE_TWISTER */
1557
1558 static inline void rtl8139_thread_iter (struct net_device *dev,
1559                                  struct rtl8139_private *tp,
1560                                  void __iomem *ioaddr)
1561 {
1562         int mii_lpa;
1563
1564         mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
1565
1566         if (!tp->mii.force_media && mii_lpa != 0xffff) {
1567                 int duplex = ((mii_lpa & LPA_100FULL) ||
1568                               (mii_lpa & 0x01C0) == 0x0040);
1569                 if (tp->mii.full_duplex != duplex) {
1570                         tp->mii.full_duplex = duplex;
1571
1572                         if (mii_lpa) {
1573                                 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
1574                                             tp->mii.full_duplex ? "full" : "half",
1575                                             tp->phys[0], mii_lpa);
1576                         } else {
1577                                 netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
1578                         }
1579 #if 0
1580                         RTL_W8 (Cfg9346, Cfg9346_Unlock);
1581                         RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
1582                         RTL_W8 (Cfg9346, Cfg9346_Lock);
1583 #endif
1584                 }
1585         }
1586
1587         next_tick = HZ * 60;
1588
1589         rtl8139_tune_twister (dev, tp);
1590
1591         netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
1592                    RTL_R16(NWayLPAR));
1593         netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
1594                    RTL_R16(IntrMask), RTL_R16(IntrStatus));
1595         netdev_dbg(dev, "Chip config %02x %02x\n",
1596                    RTL_R8(Config0), RTL_R8(Config1));
1597 }
1598
1599 static void rtl8139_thread (struct work_struct *work)
1600 {
1601         struct rtl8139_private *tp =
1602                 container_of(work, struct rtl8139_private, thread.work);
1603         struct net_device *dev = tp->mii.dev;
1604         unsigned long thr_delay = next_tick;
1605
1606         rtnl_lock();
1607
1608         if (!netif_running(dev))
1609                 goto out_unlock;
1610
1611         if (tp->watchdog_fired) {
1612                 tp->watchdog_fired = 0;
1613                 rtl8139_tx_timeout_task(work);
1614         } else
1615                 rtl8139_thread_iter(dev, tp, tp->mmio_addr);
1616
1617         if (tp->have_thread)
1618                 schedule_delayed_work(&tp->thread, thr_delay);
1619 out_unlock:
1620         rtnl_unlock ();
1621 }
1622
1623 static void rtl8139_start_thread(struct rtl8139_private *tp)
1624 {
1625         tp->twistie = 0;
1626         if (tp->chipset == CH_8139_K)
1627                 tp->twistie = 1;
1628         else if (tp->drv_flags & HAS_LNK_CHNG)
1629                 return;
1630
1631         tp->have_thread = 1;
1632         tp->watchdog_fired = 0;
1633
1634         schedule_delayed_work(&tp->thread, next_tick);
1635 }
1636
1637 static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
1638 {
1639         tp->cur_tx = 0;
1640         tp->dirty_tx = 0;
1641
1642         /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
1643 }
1644
1645 static void rtl8139_tx_timeout_task (struct work_struct *work)
1646 {
1647         struct rtl8139_private *tp =
1648                 container_of(work, struct rtl8139_private, thread.work);
1649         struct net_device *dev = tp->mii.dev;
1650         void __iomem *ioaddr = tp->mmio_addr;
1651         int i;
1652         u8 tmp8;
1653
1654         netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
1655                    RTL_R8(ChipCmd), RTL_R16(IntrStatus),
1656                    RTL_R16(IntrMask), RTL_R8(MediaStatus));
1657         /* Emit info to figure out what went wrong. */
1658         netdev_dbg(dev, "Tx queue start entry %ld  dirty entry %ld\n",
1659                    tp->cur_tx, tp->dirty_tx);
1660         for (i = 0; i < NUM_TX_DESC; i++)
1661                 netdev_dbg(dev, "Tx descriptor %d is %08x%s\n",
1662                            i, RTL_R32(TxStatus0 + (i * 4)),
1663                            i == tp->dirty_tx % NUM_TX_DESC ?
1664                            " (queue head)" : "");
1665
1666         tp->xstats.tx_timeouts++;
1667
1668         /* disable Tx ASAP, if not already */
1669         tmp8 = RTL_R8 (ChipCmd);
1670         if (tmp8 & CmdTxEnb)
1671                 RTL_W8 (ChipCmd, CmdRxEnb);
1672
1673         spin_lock_bh(&tp->rx_lock);
1674         /* Disable interrupts by clearing the interrupt mask. */
1675         RTL_W16 (IntrMask, 0x0000);
1676
1677         /* Stop a shared interrupt from scavenging while we are. */
1678         spin_lock_irq(&tp->lock);
1679         rtl8139_tx_clear (tp);
1680         spin_unlock_irq(&tp->lock);
1681
1682         /* ...and finally, reset everything */
1683         if (netif_running(dev)) {
1684                 rtl8139_hw_start (dev);
1685                 netif_wake_queue (dev);
1686         }
1687         spin_unlock_bh(&tp->rx_lock);
1688 }
1689
1690 static void rtl8139_tx_timeout (struct net_device *dev)
1691 {
1692         struct rtl8139_private *tp = netdev_priv(dev);
1693
1694         tp->watchdog_fired = 1;
1695         if (!tp->have_thread) {
1696                 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1697                 schedule_delayed_work(&tp->thread, next_tick);
1698         }
1699 }
1700
1701 static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
1702                                              struct net_device *dev)
1703 {
1704         struct rtl8139_private *tp = netdev_priv(dev);
1705         void __iomem *ioaddr = tp->mmio_addr;
1706         unsigned int entry;
1707         unsigned int len = skb->len;
1708         unsigned long flags;
1709
1710         /* Calculate the next Tx descriptor entry. */
1711         entry = tp->cur_tx % NUM_TX_DESC;
1712
1713         /* Note: the chip doesn't have auto-pad! */
1714         if (likely(len < TX_BUF_SIZE)) {
1715                 if (len < ETH_ZLEN)
1716                         memset(tp->tx_buf[entry], 0, ETH_ZLEN);
1717                 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
1718                 dev_kfree_skb(skb);
1719         } else {
1720                 dev_kfree_skb(skb);
1721                 dev->stats.tx_dropped++;
1722                 return NETDEV_TX_OK;
1723         }
1724
1725         spin_lock_irqsave(&tp->lock, flags);
1726         /*
1727          * Writing to TxStatus triggers a DMA transfer of the data
1728          * copied to tp->tx_buf[entry] above. Use a memory barrier
1729          * to make sure that the device sees the updated data.
1730          */
1731         wmb();
1732         RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
1733                    tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
1734
1735         tp->cur_tx++;
1736
1737         if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
1738                 netif_stop_queue (dev);
1739         spin_unlock_irqrestore(&tp->lock, flags);
1740
1741         netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
1742                   len, entry);
1743
1744         return NETDEV_TX_OK;
1745 }
1746
1747
1748 static void rtl8139_tx_interrupt (struct net_device *dev,
1749                                   struct rtl8139_private *tp,
1750                                   void __iomem *ioaddr)
1751 {
1752         unsigned long dirty_tx, tx_left;
1753
1754         assert (dev != NULL);
1755         assert (ioaddr != NULL);
1756
1757         dirty_tx = tp->dirty_tx;
1758         tx_left = tp->cur_tx - dirty_tx;
1759         while (tx_left > 0) {
1760                 int entry = dirty_tx % NUM_TX_DESC;
1761                 int txstatus;
1762
1763                 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
1764
1765                 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
1766                         break;  /* It still hasn't been Txed */
1767
1768                 /* Note: TxCarrierLost is always asserted at 100mbps. */
1769                 if (txstatus & (TxOutOfWindow | TxAborted)) {
1770                         /* There was an major error, log it. */
1771                         netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
1772                                   txstatus);
1773                         dev->stats.tx_errors++;
1774                         if (txstatus & TxAborted) {
1775                                 dev->stats.tx_aborted_errors++;
1776                                 RTL_W32 (TxConfig, TxClearAbt);
1777                                 RTL_W16 (IntrStatus, TxErr);
1778                                 wmb();
1779                         }
1780                         if (txstatus & TxCarrierLost)
1781                                 dev->stats.tx_carrier_errors++;
1782                         if (txstatus & TxOutOfWindow)
1783                                 dev->stats.tx_window_errors++;
1784                 } else {
1785                         if (txstatus & TxUnderrun) {
1786                                 /* Add 64 to the Tx FIFO threshold. */
1787                                 if (tp->tx_flag < 0x00300000)
1788                                         tp->tx_flag += 0x00020000;
1789                                 dev->stats.tx_fifo_errors++;
1790                         }
1791                         dev->stats.collisions += (txstatus >> 24) & 15;
1792                         u64_stats_update_begin(&tp->tx_stats.syncp);
1793                         tp->tx_stats.packets++;
1794                         tp->tx_stats.bytes += txstatus & 0x7ff;
1795                         u64_stats_update_end(&tp->tx_stats.syncp);
1796                 }
1797
1798                 dirty_tx++;
1799                 tx_left--;
1800         }
1801
1802 #ifndef RTL8139_NDEBUG
1803         if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
1804                 netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
1805                            dirty_tx, tp->cur_tx);
1806                 dirty_tx += NUM_TX_DESC;
1807         }
1808 #endif /* RTL8139_NDEBUG */
1809
1810         /* only wake the queue if we did work, and the queue is stopped */
1811         if (tp->dirty_tx != dirty_tx) {
1812                 tp->dirty_tx = dirty_tx;
1813                 mb();
1814                 netif_wake_queue (dev);
1815         }
1816 }
1817
1818
1819 /* TODO: clean this up!  Rx reset need not be this intensive */
1820 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
1821                             struct rtl8139_private *tp, void __iomem *ioaddr)
1822 {
1823         u8 tmp8;
1824 #ifdef CONFIG_8139_OLD_RX_RESET
1825         int tmp_work;
1826 #endif
1827
1828         netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
1829                   rx_status);
1830         dev->stats.rx_errors++;
1831         if (!(rx_status & RxStatusOK)) {
1832                 if (rx_status & RxTooLong) {
1833                         netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
1834                                    rx_status);
1835                         /* A.C.: The chip hangs here. */
1836                 }
1837                 if (rx_status & (RxBadSymbol | RxBadAlign))
1838                         dev->stats.rx_frame_errors++;
1839                 if (rx_status & (RxRunt | RxTooLong))
1840                         dev->stats.rx_length_errors++;
1841                 if (rx_status & RxCRCErr)
1842                         dev->stats.rx_crc_errors++;
1843         } else {
1844                 tp->xstats.rx_lost_in_ring++;
1845         }
1846
1847 #ifndef CONFIG_8139_OLD_RX_RESET
1848         tmp8 = RTL_R8 (ChipCmd);
1849         RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
1850         RTL_W8 (ChipCmd, tmp8);
1851         RTL_W32 (RxConfig, tp->rx_config);
1852         tp->cur_rx = 0;
1853 #else
1854         /* Reset the receiver, based on RealTek recommendation. (Bug?) */
1855
1856         /* disable receive */
1857         RTL_W8_F (ChipCmd, CmdTxEnb);
1858         tmp_work = 200;
1859         while (--tmp_work > 0) {
1860                 udelay(1);
1861                 tmp8 = RTL_R8 (ChipCmd);
1862                 if (!(tmp8 & CmdRxEnb))
1863                         break;
1864         }
1865         if (tmp_work <= 0)
1866                 netdev_warn(dev, "rx stop wait too long\n");
1867         /* restart receive */
1868         tmp_work = 200;
1869         while (--tmp_work > 0) {
1870                 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
1871                 udelay(1);
1872                 tmp8 = RTL_R8 (ChipCmd);
1873                 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
1874                         break;
1875         }
1876         if (tmp_work <= 0)
1877                 netdev_warn(dev, "tx/rx enable wait too long\n");
1878
1879         /* and reinitialize all rx related registers */
1880         RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1881         /* Must enable Tx/Rx before setting transfer thresholds! */
1882         RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1883
1884         tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1885         RTL_W32 (RxConfig, tp->rx_config);
1886         tp->cur_rx = 0;
1887
1888         netdev_dbg(dev, "init buffer addresses\n");
1889
1890         /* Lock Config[01234] and BMCR register writes */
1891         RTL_W8 (Cfg9346, Cfg9346_Lock);
1892
1893         /* init Rx ring buffer DMA address */
1894         RTL_W32_F (RxBuf, tp->rx_ring_dma);
1895
1896         /* A.C.: Reset the multicast list. */
1897         __set_rx_mode (dev);
1898 #endif
1899 }
1900
1901 #if RX_BUF_IDX == 3
1902 static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
1903                                  u32 offset, unsigned int size)
1904 {
1905         u32 left = RX_BUF_LEN - offset;
1906
1907         if (size > left) {
1908                 skb_copy_to_linear_data(skb, ring + offset, left);
1909                 skb_copy_to_linear_data_offset(skb, left, ring, size - left);
1910         } else
1911                 skb_copy_to_linear_data(skb, ring + offset, size);
1912 }
1913 #endif
1914
1915 static void rtl8139_isr_ack(struct rtl8139_private *tp)
1916 {
1917         void __iomem *ioaddr = tp->mmio_addr;
1918         u16 status;
1919
1920         status = RTL_R16 (IntrStatus) & RxAckBits;
1921
1922         /* Clear out errors and receive interrupts */
1923         if (likely(status != 0)) {
1924                 if (unlikely(status & (RxFIFOOver | RxOverflow))) {
1925                         tp->dev->stats.rx_errors++;
1926                         if (status & RxFIFOOver)
1927                                 tp->dev->stats.rx_fifo_errors++;
1928                 }
1929                 RTL_W16_F (IntrStatus, RxAckBits);
1930         }
1931 }
1932
1933 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
1934                       int budget)
1935 {
1936         void __iomem *ioaddr = tp->mmio_addr;
1937         int received = 0;
1938         unsigned char *rx_ring = tp->rx_ring;
1939         unsigned int cur_rx = tp->cur_rx;
1940         unsigned int rx_size = 0;
1941
1942         netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
1943                    __func__, (u16)cur_rx,
1944                    RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
1945
1946         while (netif_running(dev) && received < budget &&
1947                (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
1948                 u32 ring_offset = cur_rx % RX_BUF_LEN;
1949                 u32 rx_status;
1950                 unsigned int pkt_size;
1951                 struct sk_buff *skb;
1952
1953                 rmb();
1954
1955                 /* read size+status of next frame from DMA ring buffer */
1956                 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
1957                 rx_size = rx_status >> 16;
1958                 if (likely(!(dev->features & NETIF_F_RXFCS)))
1959                         pkt_size = rx_size - 4;
1960                 else
1961                         pkt_size = rx_size;
1962
1963                 netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
1964                           __func__, rx_status, rx_size, cur_rx);
1965 #if RTL8139_DEBUG > 2
1966                 print_hex_dump(KERN_DEBUG, "Frame contents: ",
1967                                DUMP_PREFIX_OFFSET, 16, 1,
1968                                &rx_ring[ring_offset], 70, true);
1969 #endif
1970
1971                 /* Packet copy from FIFO still in progress.
1972                  * Theoretically, this should never happen
1973                  * since EarlyRx is disabled.
1974                  */
1975                 if (unlikely(rx_size == 0xfff0)) {
1976                         if (!tp->fifo_copy_timeout)
1977                                 tp->fifo_copy_timeout = jiffies + 2;
1978                         else if (time_after(jiffies, tp->fifo_copy_timeout)) {
1979                                 netdev_dbg(dev, "hung FIFO. Reset\n");
1980                                 rx_size = 0;
1981                                 goto no_early_rx;
1982                         }
1983                         netif_dbg(tp, intr, dev, "fifo copy in progress\n");
1984                         tp->xstats.early_rx++;
1985                         break;
1986                 }
1987
1988 no_early_rx:
1989                 tp->fifo_copy_timeout = 0;
1990
1991                 /* If Rx err or invalid rx_size/rx_status received
1992                  * (which happens if we get lost in the ring),
1993                  * Rx process gets reset, so we abort any further
1994                  * Rx processing.
1995                  */
1996                 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
1997                              (rx_size < 8) ||
1998                              (!(rx_status & RxStatusOK)))) {
1999                         if ((dev->features & NETIF_F_RXALL) &&
2000                             (rx_size <= (MAX_ETH_FRAME_SIZE + 4)) &&
2001                             (rx_size >= 8) &&
2002                             (!(rx_status & RxStatusOK))) {
2003                                 /* Length is at least mostly OK, but pkt has
2004                                  * error.  I'm hoping we can handle some of these
2005                                  * errors without resetting the chip. --Ben
2006                                  */
2007                                 dev->stats.rx_errors++;
2008                                 if (rx_status & RxCRCErr) {
2009                                         dev->stats.rx_crc_errors++;
2010                                         goto keep_pkt;
2011                                 }
2012                                 if (rx_status & RxRunt) {
2013                                         dev->stats.rx_length_errors++;
2014                                         goto keep_pkt;
2015                                 }
2016                         }
2017                         rtl8139_rx_err (rx_status, dev, tp, ioaddr);
2018                         received = -1;
2019                         goto out;
2020                 }
2021
2022 keep_pkt:
2023                 /* Malloc up new buffer, compatible with net-2e. */
2024                 /* Omit the four octet CRC from the length. */
2025
2026                 skb = netdev_alloc_skb_ip_align(dev, pkt_size);
2027                 if (likely(skb)) {
2028 #if RX_BUF_IDX == 3
2029                         wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
2030 #else
2031                         skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
2032 #endif
2033                         skb_put (skb, pkt_size);
2034
2035                         skb->protocol = eth_type_trans (skb, dev);
2036
2037                         u64_stats_update_begin(&tp->rx_stats.syncp);
2038                         tp->rx_stats.packets++;
2039                         tp->rx_stats.bytes += pkt_size;
2040                         u64_stats_update_end(&tp->rx_stats.syncp);
2041
2042                         netif_receive_skb (skb);
2043                 } else {
2044                         dev->stats.rx_dropped++;
2045                 }
2046                 received++;
2047
2048                 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
2049                 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
2050
2051                 rtl8139_isr_ack(tp);
2052         }
2053
2054         if (unlikely(!received || rx_size == 0xfff0))
2055                 rtl8139_isr_ack(tp);
2056
2057         netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
2058                    __func__, cur_rx,
2059                    RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
2060
2061         tp->cur_rx = cur_rx;
2062
2063         /*
2064          * The receive buffer should be mostly empty.
2065          * Tell NAPI to reenable the Rx irq.
2066          */
2067         if (tp->fifo_copy_timeout)
2068                 received = budget;
2069
2070 out:
2071         return received;
2072 }
2073
2074
2075 static void rtl8139_weird_interrupt (struct net_device *dev,
2076                                      struct rtl8139_private *tp,
2077                                      void __iomem *ioaddr,
2078                                      int status, int link_changed)
2079 {
2080         netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
2081
2082         assert (dev != NULL);
2083         assert (tp != NULL);
2084         assert (ioaddr != NULL);
2085
2086         /* Update the error count. */
2087         dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2088         RTL_W32 (RxMissed, 0);
2089
2090         if ((status & RxUnderrun) && link_changed &&
2091             (tp->drv_flags & HAS_LNK_CHNG)) {
2092                 rtl_check_media(dev, 0);
2093                 status &= ~RxUnderrun;
2094         }
2095
2096         if (status & (RxUnderrun | RxErr))
2097                 dev->stats.rx_errors++;
2098
2099         if (status & PCSTimeout)
2100                 dev->stats.rx_length_errors++;
2101         if (status & RxUnderrun)
2102                 dev->stats.rx_fifo_errors++;
2103         if (status & PCIErr) {
2104                 u16 pci_cmd_status;
2105                 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
2106                 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
2107
2108                 netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
2109         }
2110 }
2111
2112 static int rtl8139_poll(struct napi_struct *napi, int budget)
2113 {
2114         struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
2115         struct net_device *dev = tp->dev;
2116         void __iomem *ioaddr = tp->mmio_addr;
2117         int work_done;
2118
2119         spin_lock(&tp->rx_lock);
2120         work_done = 0;
2121         if (likely(RTL_R16(IntrStatus) & RxAckBits))
2122                 work_done += rtl8139_rx(dev, tp, budget);
2123
2124         if (work_done < budget) {
2125                 unsigned long flags;
2126                 /*
2127                  * Order is important since data can get interrupted
2128                  * again when we think we are done.
2129                  */
2130                 spin_lock_irqsave(&tp->lock, flags);
2131                 __napi_complete(napi);
2132                 RTL_W16_F(IntrMask, rtl8139_intr_mask);
2133                 spin_unlock_irqrestore(&tp->lock, flags);
2134         }
2135         spin_unlock(&tp->rx_lock);
2136
2137         return work_done;
2138 }
2139
2140 /* The interrupt handler does all of the Rx thread work and cleans up
2141    after the Tx thread. */
2142 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
2143 {
2144         struct net_device *dev = (struct net_device *) dev_instance;
2145         struct rtl8139_private *tp = netdev_priv(dev);
2146         void __iomem *ioaddr = tp->mmio_addr;
2147         u16 status, ackstat;
2148         int link_changed = 0; /* avoid bogus "uninit" warning */
2149         int handled = 0;
2150
2151         spin_lock (&tp->lock);
2152         status = RTL_R16 (IntrStatus);
2153
2154         /* shared irq? */
2155         if (unlikely((status & rtl8139_intr_mask) == 0))
2156                 goto out;
2157
2158         handled = 1;
2159
2160         /* h/w no longer present (hotplug?) or major error, bail */
2161         if (unlikely(status == 0xFFFF))
2162                 goto out;
2163
2164         /* close possible race's with dev_close */
2165         if (unlikely(!netif_running(dev))) {
2166                 RTL_W16 (IntrMask, 0);
2167                 goto out;
2168         }
2169
2170         /* Acknowledge all of the current interrupt sources ASAP, but
2171            an first get an additional status bit from CSCR. */
2172         if (unlikely(status & RxUnderrun))
2173                 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
2174
2175         ackstat = status & ~(RxAckBits | TxErr);
2176         if (ackstat)
2177                 RTL_W16 (IntrStatus, ackstat);
2178
2179         /* Receive packets are processed by poll routine.
2180            If not running start it now. */
2181         if (status & RxAckBits){
2182                 if (napi_schedule_prep(&tp->napi)) {
2183                         RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
2184                         __napi_schedule(&tp->napi);
2185                 }
2186         }
2187
2188         /* Check uncommon events with one test. */
2189         if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
2190                 rtl8139_weird_interrupt (dev, tp, ioaddr,
2191                                          status, link_changed);
2192
2193         if (status & (TxOK | TxErr)) {
2194                 rtl8139_tx_interrupt (dev, tp, ioaddr);
2195                 if (status & TxErr)
2196                         RTL_W16 (IntrStatus, TxErr);
2197         }
2198  out:
2199         spin_unlock (&tp->lock);
2200
2201         netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
2202                    RTL_R16(IntrStatus));
2203         return IRQ_RETVAL(handled);
2204 }
2205
2206 #ifdef CONFIG_NET_POLL_CONTROLLER
2207 /*
2208  * Polling receive - used by netconsole and other diagnostic tools
2209  * to allow network i/o with interrupts disabled.
2210  */
2211 static void rtl8139_poll_controller(struct net_device *dev)
2212 {
2213         struct rtl8139_private *tp = netdev_priv(dev);
2214         const int irq = tp->pci_dev->irq;
2215
2216         disable_irq(irq);
2217         rtl8139_interrupt(irq, dev);
2218         enable_irq(irq);
2219 }
2220 #endif
2221
2222 static int rtl8139_set_mac_address(struct net_device *dev, void *p)
2223 {
2224         struct rtl8139_private *tp = netdev_priv(dev);
2225         void __iomem *ioaddr = tp->mmio_addr;
2226         struct sockaddr *addr = p;
2227
2228         if (!is_valid_ether_addr(addr->sa_data))
2229                 return -EADDRNOTAVAIL;
2230
2231         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
2232
2233         spin_lock_irq(&tp->lock);
2234
2235         RTL_W8_F(Cfg9346, Cfg9346_Unlock);
2236         RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
2237         RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
2238         RTL_W8_F(Cfg9346, Cfg9346_Lock);
2239
2240         spin_unlock_irq(&tp->lock);
2241
2242         return 0;
2243 }
2244
2245 static int rtl8139_close (struct net_device *dev)
2246 {
2247         struct rtl8139_private *tp = netdev_priv(dev);
2248         void __iomem *ioaddr = tp->mmio_addr;
2249         unsigned long flags;
2250
2251         netif_stop_queue(dev);
2252         napi_disable(&tp->napi);
2253
2254         netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
2255                   RTL_R16(IntrStatus));
2256
2257         spin_lock_irqsave (&tp->lock, flags);
2258
2259         /* Stop the chip's Tx and Rx DMA processes. */
2260         RTL_W8 (ChipCmd, 0);
2261
2262         /* Disable interrupts by clearing the interrupt mask. */
2263         RTL_W16 (IntrMask, 0);
2264
2265         /* Update the error counts. */
2266         dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2267         RTL_W32 (RxMissed, 0);
2268
2269         spin_unlock_irqrestore (&tp->lock, flags);
2270
2271         free_irq(tp->pci_dev->irq, dev);
2272
2273         rtl8139_tx_clear (tp);
2274
2275         dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
2276                           tp->rx_ring, tp->rx_ring_dma);
2277         dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
2278                           tp->tx_bufs, tp->tx_bufs_dma);
2279         tp->rx_ring = NULL;
2280         tp->tx_bufs = NULL;
2281
2282         /* Green! Put the chip in low-power mode. */
2283         RTL_W8 (Cfg9346, Cfg9346_Unlock);
2284
2285         if (rtl_chip_info[tp->chipset].flags & HasHltClk)
2286                 RTL_W8 (HltClk, 'H');   /* 'R' would leave the clock running. */
2287
2288         return 0;
2289 }
2290
2291
2292 /* Get the ethtool Wake-on-LAN settings.  Assumes that wol points to
2293    kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
2294    other threads or interrupts aren't messing with the 8139.  */
2295 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2296 {
2297         struct rtl8139_private *tp = netdev_priv(dev);
2298         void __iomem *ioaddr = tp->mmio_addr;
2299
2300         spin_lock_irq(&tp->lock);
2301         if (rtl_chip_info[tp->chipset].flags & HasLWake) {
2302                 u8 cfg3 = RTL_R8 (Config3);
2303                 u8 cfg5 = RTL_R8 (Config5);
2304
2305                 wol->supported = WAKE_PHY | WAKE_MAGIC
2306                         | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
2307
2308                 wol->wolopts = 0;
2309                 if (cfg3 & Cfg3_LinkUp)
2310                         wol->wolopts |= WAKE_PHY;
2311                 if (cfg3 & Cfg3_Magic)
2312                         wol->wolopts |= WAKE_MAGIC;
2313                 /* (KON)FIXME: See how netdev_set_wol() handles the
2314                    following constants.  */
2315                 if (cfg5 & Cfg5_UWF)
2316                         wol->wolopts |= WAKE_UCAST;
2317                 if (cfg5 & Cfg5_MWF)
2318                         wol->wolopts |= WAKE_MCAST;
2319                 if (cfg5 & Cfg5_BWF)
2320                         wol->wolopts |= WAKE_BCAST;
2321         }
2322         spin_unlock_irq(&tp->lock);
2323 }
2324
2325
2326 /* Set the ethtool Wake-on-LAN settings.  Return 0 or -errno.  Assumes
2327    that wol points to kernel memory and other threads or interrupts
2328    aren't messing with the 8139.  */
2329 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2330 {
2331         struct rtl8139_private *tp = netdev_priv(dev);
2332         void __iomem *ioaddr = tp->mmio_addr;
2333         u32 support;
2334         u8 cfg3, cfg5;
2335
2336         support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
2337                    ? (WAKE_PHY | WAKE_MAGIC
2338                       | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
2339                    : 0);
2340         if (wol->wolopts & ~support)
2341                 return -EINVAL;
2342
2343         spin_lock_irq(&tp->lock);
2344         cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
2345         if (wol->wolopts & WAKE_PHY)
2346                 cfg3 |= Cfg3_LinkUp;
2347         if (wol->wolopts & WAKE_MAGIC)
2348                 cfg3 |= Cfg3_Magic;
2349         RTL_W8 (Cfg9346, Cfg9346_Unlock);
2350         RTL_W8 (Config3, cfg3);
2351         RTL_W8 (Cfg9346, Cfg9346_Lock);
2352
2353         cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
2354         /* (KON)FIXME: These are untested.  We may have to set the
2355            CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
2356            documentation.  */
2357         if (wol->wolopts & WAKE_UCAST)
2358                 cfg5 |= Cfg5_UWF;
2359         if (wol->wolopts & WAKE_MCAST)
2360                 cfg5 |= Cfg5_MWF;
2361         if (wol->wolopts & WAKE_BCAST)
2362                 cfg5 |= Cfg5_BWF;
2363         RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
2364         spin_unlock_irq(&tp->lock);
2365
2366         return 0;
2367 }
2368
2369 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2370 {
2371         struct rtl8139_private *tp = netdev_priv(dev);
2372         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
2373         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
2374         strlcpy(info->bus_info, pci_name(tp->pci_dev), sizeof(info->bus_info));
2375         info->regdump_len = tp->regs_len;
2376 }
2377
2378 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2379 {
2380         struct rtl8139_private *tp = netdev_priv(dev);
2381         spin_lock_irq(&tp->lock);
2382         mii_ethtool_gset(&tp->mii, cmd);
2383         spin_unlock_irq(&tp->lock);
2384         return 0;
2385 }
2386
2387 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2388 {
2389         struct rtl8139_private *tp = netdev_priv(dev);
2390         int rc;
2391         spin_lock_irq(&tp->lock);
2392         rc = mii_ethtool_sset(&tp->mii, cmd);
2393         spin_unlock_irq(&tp->lock);
2394         return rc;
2395 }
2396
2397 static int rtl8139_nway_reset(struct net_device *dev)
2398 {
2399         struct rtl8139_private *tp = netdev_priv(dev);
2400         return mii_nway_restart(&tp->mii);
2401 }
2402
2403 static u32 rtl8139_get_link(struct net_device *dev)
2404 {
2405         struct rtl8139_private *tp = netdev_priv(dev);
2406         return mii_link_ok(&tp->mii);
2407 }
2408
2409 static u32 rtl8139_get_msglevel(struct net_device *dev)
2410 {
2411         struct rtl8139_private *tp = netdev_priv(dev);
2412         return tp->msg_enable;
2413 }
2414
2415 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
2416 {
2417         struct rtl8139_private *tp = netdev_priv(dev);
2418         tp->msg_enable = datum;
2419 }
2420
2421 static int rtl8139_get_regs_len(struct net_device *dev)
2422 {
2423         struct rtl8139_private *tp;
2424         /* TODO: we are too slack to do reg dumping for pio, for now */
2425         if (use_io)
2426                 return 0;
2427         tp = netdev_priv(dev);
2428         return tp->regs_len;
2429 }
2430
2431 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
2432 {
2433         struct rtl8139_private *tp;
2434
2435         /* TODO: we are too slack to do reg dumping for pio, for now */
2436         if (use_io)
2437                 return;
2438         tp = netdev_priv(dev);
2439
2440         regs->version = RTL_REGS_VER;
2441
2442         spin_lock_irq(&tp->lock);
2443         memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
2444         spin_unlock_irq(&tp->lock);
2445 }
2446
2447 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
2448 {
2449         switch (sset) {
2450         case ETH_SS_STATS:
2451                 return RTL_NUM_STATS;
2452         default:
2453                 return -EOPNOTSUPP;
2454         }
2455 }
2456
2457 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
2458 {
2459         struct rtl8139_private *tp = netdev_priv(dev);
2460
2461         data[0] = tp->xstats.early_rx;
2462         data[1] = tp->xstats.tx_buf_mapped;
2463         data[2] = tp->xstats.tx_timeouts;
2464         data[3] = tp->xstats.rx_lost_in_ring;
2465 }
2466
2467 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
2468 {
2469         memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
2470 }
2471
2472 static const struct ethtool_ops rtl8139_ethtool_ops = {
2473         .get_drvinfo            = rtl8139_get_drvinfo,
2474         .get_settings           = rtl8139_get_settings,
2475         .set_settings           = rtl8139_set_settings,
2476         .get_regs_len           = rtl8139_get_regs_len,
2477         .get_regs               = rtl8139_get_regs,
2478         .nway_reset             = rtl8139_nway_reset,
2479         .get_link               = rtl8139_get_link,
2480         .get_msglevel           = rtl8139_get_msglevel,
2481         .set_msglevel           = rtl8139_set_msglevel,
2482         .get_wol                = rtl8139_get_wol,
2483         .set_wol                = rtl8139_set_wol,
2484         .get_strings            = rtl8139_get_strings,
2485         .get_sset_count         = rtl8139_get_sset_count,
2486         .get_ethtool_stats      = rtl8139_get_ethtool_stats,
2487 };
2488
2489 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2490 {
2491         struct rtl8139_private *tp = netdev_priv(dev);
2492         int rc;
2493
2494         if (!netif_running(dev))
2495                 return -EINVAL;
2496
2497         spin_lock_irq(&tp->lock);
2498         rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
2499         spin_unlock_irq(&tp->lock);
2500
2501         return rc;
2502 }
2503
2504
2505 static struct rtnl_link_stats64 *
2506 rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
2507 {
2508         struct rtl8139_private *tp = netdev_priv(dev);
2509         void __iomem *ioaddr = tp->mmio_addr;
2510         unsigned long flags;
2511         unsigned int start;
2512
2513         if (netif_running(dev)) {
2514                 spin_lock_irqsave (&tp->lock, flags);
2515                 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2516                 RTL_W32 (RxMissed, 0);
2517                 spin_unlock_irqrestore (&tp->lock, flags);
2518         }
2519
2520         netdev_stats_to_stats64(stats, &dev->stats);
2521
2522         do {
2523                 start = u64_stats_fetch_begin_bh(&tp->rx_stats.syncp);
2524                 stats->rx_packets = tp->rx_stats.packets;
2525                 stats->rx_bytes = tp->rx_stats.bytes;
2526         } while (u64_stats_fetch_retry_bh(&tp->rx_stats.syncp, start));
2527
2528         do {
2529                 start = u64_stats_fetch_begin_bh(&tp->tx_stats.syncp);
2530                 stats->tx_packets = tp->tx_stats.packets;
2531                 stats->tx_bytes = tp->tx_stats.bytes;
2532         } while (u64_stats_fetch_retry_bh(&tp->tx_stats.syncp, start));
2533
2534         return stats;
2535 }
2536
2537 /* Set or clear the multicast filter for this adaptor.
2538    This routine is not state sensitive and need not be SMP locked. */
2539
2540 static void __set_rx_mode (struct net_device *dev)
2541 {
2542         struct rtl8139_private *tp = netdev_priv(dev);
2543         void __iomem *ioaddr = tp->mmio_addr;
2544         u32 mc_filter[2];       /* Multicast hash filter */
2545         int rx_mode;
2546         u32 tmp;
2547
2548         netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n",
2549                    dev->flags, RTL_R32(RxConfig));
2550
2551         /* Note: do not reorder, GCC is clever about common statements. */
2552         if (dev->flags & IFF_PROMISC) {
2553                 rx_mode =
2554                     AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
2555                     AcceptAllPhys;
2556                 mc_filter[1] = mc_filter[0] = 0xffffffff;
2557         } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
2558                    (dev->flags & IFF_ALLMULTI)) {
2559                 /* Too many to filter perfectly -- accept all multicasts. */
2560                 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
2561                 mc_filter[1] = mc_filter[0] = 0xffffffff;
2562         } else {
2563                 struct netdev_hw_addr *ha;
2564                 rx_mode = AcceptBroadcast | AcceptMyPhys;
2565                 mc_filter[1] = mc_filter[0] = 0;
2566                 netdev_for_each_mc_addr(ha, dev) {
2567                         int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
2568
2569                         mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2570                         rx_mode |= AcceptMulticast;
2571                 }
2572         }
2573
2574         if (dev->features & NETIF_F_RXALL)
2575                 rx_mode |= (AcceptErr | AcceptRunt);
2576
2577         /* We can safely update without stopping the chip. */
2578         tmp = rtl8139_rx_config | rx_mode;
2579         if (tp->rx_config != tmp) {
2580                 RTL_W32_F (RxConfig, tmp);
2581                 tp->rx_config = tmp;
2582         }
2583         RTL_W32_F (MAR0 + 0, mc_filter[0]);
2584         RTL_W32_F (MAR0 + 4, mc_filter[1]);
2585 }
2586
2587 static void rtl8139_set_rx_mode (struct net_device *dev)
2588 {
2589         unsigned long flags;
2590         struct rtl8139_private *tp = netdev_priv(dev);
2591
2592         spin_lock_irqsave (&tp->lock, flags);
2593         __set_rx_mode(dev);
2594         spin_unlock_irqrestore (&tp->lock, flags);
2595 }
2596
2597 #ifdef CONFIG_PM
2598
2599 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
2600 {
2601         struct net_device *dev = pci_get_drvdata (pdev);
2602         struct rtl8139_private *tp = netdev_priv(dev);
2603         void __iomem *ioaddr = tp->mmio_addr;
2604         unsigned long flags;
2605
2606         pci_save_state (pdev);
2607
2608         if (!netif_running (dev))
2609                 return 0;
2610
2611         netif_device_detach (dev);
2612
2613         spin_lock_irqsave (&tp->lock, flags);
2614
2615         /* Disable interrupts, stop Tx and Rx. */
2616         RTL_W16 (IntrMask, 0);
2617         RTL_W8 (ChipCmd, 0);
2618
2619         /* Update the error counts. */
2620         dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2621         RTL_W32 (RxMissed, 0);
2622
2623         spin_unlock_irqrestore (&tp->lock, flags);
2624
2625         pci_set_power_state (pdev, PCI_D3hot);
2626
2627         return 0;
2628 }
2629
2630
2631 static int rtl8139_resume (struct pci_dev *pdev)
2632 {
2633         struct net_device *dev = pci_get_drvdata (pdev);
2634
2635         pci_restore_state (pdev);
2636         if (!netif_running (dev))
2637                 return 0;
2638         pci_set_power_state (pdev, PCI_D0);
2639         rtl8139_init_ring (dev);
2640         rtl8139_hw_start (dev);
2641         netif_device_attach (dev);
2642         return 0;
2643 }
2644
2645 #endif /* CONFIG_PM */
2646
2647
2648 static struct pci_driver rtl8139_pci_driver = {
2649         .name           = DRV_NAME,
2650         .id_table       = rtl8139_pci_tbl,
2651         .probe          = rtl8139_init_one,
2652         .remove         = rtl8139_remove_one,
2653 #ifdef CONFIG_PM
2654         .suspend        = rtl8139_suspend,
2655         .resume         = rtl8139_resume,
2656 #endif /* CONFIG_PM */
2657 };
2658
2659
2660 static int __init rtl8139_init_module (void)
2661 {
2662         /* when we're a module, we always print a version message,
2663          * even if no 8139 board is found.
2664          */
2665 #ifdef MODULE
2666         pr_info(RTL8139_DRIVER_NAME "\n");
2667 #endif
2668
2669         return pci_register_driver(&rtl8139_pci_driver);
2670 }
2671
2672
2673 static void __exit rtl8139_cleanup_module (void)
2674 {
2675         pci_unregister_driver (&rtl8139_pci_driver);
2676 }
2677
2678
2679 module_init(rtl8139_init_module);
2680 module_exit(rtl8139_cleanup_module);