+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
+Sat May 1 15:04:42 PDT 1999 Manish Singh <yosh@gimp.org>
+
+ * acinclude.m4
+ * config.guess
+ * config.sub
+ * ltconfig
+ * ltmain.sh: upgrade to libtool 1.3
+
Fri Apr 30 13:38:16 1999 Lars Hamann <lars@gtk.org>
* gtk/gtkclist.c:
## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
-## Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.
-# serial 35 AC_PROG_LIBTOOL
+# serial 39 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+ [ --disable-libtool-lock avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
fi
;;
-*-*-cygwin*)
- AC_SYS_LIBTOOL_CYGWIN
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
-
+])
esac
-
-# enable the --disable-libtool-lock switch
-
-AC_ARG_ENABLE(libtool-lock,
-[ --disable-libtool-lock force libtool not to do file locking],
-need_locks=$enableval,
-need_locks=yes)
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
])
-# AC_LIBTOOL_DLOPEN - check for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED,
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED,
-[AC_ENABLE_SHARED(no)])
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC,
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC,
-[AC_ENABLE_STATIC(no)])
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL,
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL,
-[AC_ENABLE_FAST_INSTALL(no)])
-
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
AC_SUBST(NM)
])
-# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
-# by C symbol name from nm.
-AC_DEFUN(AC_SYS_NM_PARSE,
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+LIBM=
+case "$host" in
+*-*-beos* | *-*-cygwin*)
+ # These system don't have libm
;;
-irix*)
- ac_symcode='[BCDEGRST]'
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
-solaris*)
- ac_symcode='[BDT]'
+*)
+ AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-AC_CHECK_TOOL(AS, as, false)
-])
-
-# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
-# with an underscore?
-AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
-[AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_SYS_NM_PARSE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM, [
-AC_CHECK_LIB(mw, _mwvalidcheckl)
-AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
- AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
- case "$enable_ltdl_install" in
- no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
- "") enable_ltdl_install=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
- esac
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ AC_CHECK_LIB(ltdl, main,
+ [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+ [if test x"$enable_ltdl_install" = xno; then
+ AC_MSG_WARN([libltdl not installed, but installation disabled])
+ else
+ enable_ltdl_install=yes
+ fi
])
- if test x"$enable_ltdl_install" != x"no"; then
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
fi
])
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
-AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
+dnl This is just to quiet aclocal about the macro not being used
+if(a,b,[AC_DISABLE_FAST_INSTALL])dnl
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
# (but try to keep the structure clean).
#
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+ if test x"$HOST_CC" != x; then
+ CC_FOR_BUILD="$HOST_CC"
+ else
+ if test x"$CC" != x; then
+ CC_FOR_BUILD="$CC"
+ else
+ CC_FOR_BUILD=cc
+ fi
+ fi
+fi
+
+
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
ret \$31,(\$26),1
.end main
EOF
- ${CC-cc} $dummy.s -o $dummy 2>/dev/null
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
atari*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
sun3*:NetBSD:*:*)
echo m68k-sun-netbsd${UNAME_RELEASE}
exit 0 ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
- 2020:CLIX:*:*)
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
exit (-1);
}
EOF
- ${CC-cc} $dummy.c -o $dummy \
+ $CC_FOR_BUILD $dummy.c -o $dummy \
&& ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
&& rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
exit(0);
}
EOF
- ${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
exit (0);
}
EOF
- (${CC-cc} $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+ ($CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
rm -f $dummy.c $dummy
esac
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
exit (0);
}
EOF
- ${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+ $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
*9??*:MPE*:*:*)
echo hppa1.0-hp-mpeix
exit 0 ;;
- *9??*:MPE*:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
esac
# The BFD linker knows what the default object file format is, so
- # first see if it will tell us.
- ld_help_string=`ld --help 2>&1`
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ ld_help_string=`cd /; ld --help 2>&1`
ld_supported_emulations=`echo $ld_help_string \
| sed -ne '/supported emulations:/!d
s/[ ][ ]*/ /g
.end main
EOF
LIBC=""
- ${CC-cc} $dummy.s -o $dummy 2>/dev/null
+ $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
return 0;
}
EOF
- ${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
else
# Either a pre-BFD a.out linker (linux-gnuoldld)
return 0;
}
EOF
- ${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+ $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
}
EOF
-${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
# Apollos put the system type in the environment.
# Some are omitted here because they have special meanings below.
tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
- | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
- | hppa2.0w \
- | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
- | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
- | mips64 | mipsel | mips64el | mips64orion | mips64orionel \
- | mipstx39 | mipstx39el \
+ | 580 | i960 | h8300 \
+ | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w \
+ | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
+ | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+ | 1750a | dsp16xx | pdp11 | mips64 | mipsel | mips64el \
+ | mips64orion | mips64orionel | mipstx39 | mipstx39el \
| sparc | sparclet | sparclite | sparc64 | v850)
basic_machine=$basic_machine-unknown
;;
| m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
| mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
| power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
- | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
- | hppa2.0w-* \
- | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
- | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
+ | xmp-* | ymp-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+ | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67] \
+ | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+ | clipper-* | orion-* \
| sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
| sparc64-* | mips64-* | mipsel-* \
| mips64el-* | mips64orion-* | mips64orionel-* \
xps | xps100)
basic_machine=xps100-honeywell
;;
+ *mint | *MiNT)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
none)
basic_machine=none-none
os=-none
-xenix)
os=-xenix
;;
+ -*mint | -*MiNT)
+ os=-mint
+ ;;
-none)
;;
*)
f301-fujitsu)
os=-uxpv
;;
+ *-atari*)
+ os=-mint
+ ;;
*)
os=-none
;;
-aux*)
vendor=apple
;;
+ -*mint | -*MiNT)
+ vendor=atari
+ ;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
# ltconfig - Create a system-specific libtool.
# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
+ # Avoid inline document here, it may be left over
+ :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
exec "$SHELL" "$0" --no-reexec ${1+"$@"}
fi
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
# Find the correct PATH separator. Usually this is `:', but
# DJGPP uses `;' like DOS.
if test "X${PATH_SEPARATOR+set}" != "Xset"; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for dir in $PATH /usr/ucb; do
- if test -f $dir/echo &&
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
echo="$dir/echo"
test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
# This shell has a builtin print -r that does the trick.
echo='print -r'
- elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running ltconfig again with it.
ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
export ORIGINAL_CONFIG_SHELL
# Constants:
PROGRAM=ltconfig
PACKAGE=libtool
-VERSION=1.2f
-TIMESTAMP=" (1.385 1999/03/15 17:24:54)"
+VERSION=1.3
+TIMESTAMP=" (1.385.2.117 1999/04/29 13:07:13)"
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
rm="rm -f"
enable_static=yes
enable_fast_install=yes
enable_dlopen=unknown
+enable_win32_dll=no
ltmain=
silent=
srcdir=
old_CC="$CC"
old_CFLAGS="$CFLAGS"
old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
old_LD="$LD"
old_LN_S="$LN_S"
+old_LIBS="$LIBS"
old_NM="$NM"
old_RANLIB="$RANLIB"
old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
old_AS="$AS"
# Parse the command line options.
--disable-static do not build static libraries
--disable-fast-install do not optimize for fast installation
--enable-dlopen enable dlopen support
- --enable-dlopen-self enable support for dlopening programs
+ --enable-win32-dll enable building dlls on win32 hosts
--help display this help and exit
--no-verify do not verify that HOST is a valid host type
-o, --output=FILE specify the output file [default=$default_ofile]
--enable-dlopen) enable_dlopen=yes ;;
+ --enable-win32-dll) enable_win32_dll=yes ;;
+
--quiet | --silent) silent=yes ;;
--srcdir) prev=srcdir ;;
# Set a sane default for `AR'.
test -z "$AR" && AR=ar
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
# If RANLIB is not set, then run the test.
if test "${RANLIB+set}" != "set"; then
result=no
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for dir in $PATH; do
test -z "$dir" && dir=.
- if test -f $dir/ranlib; then
+ if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
RANLIB="ranlib"
result="ranlib"
break
old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
fi
-# Set sane defaults for `DLLTOOL' and `AS', used on cygwin.
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$AS" && AS=as
# Check to see if we are using GCC.
echo $ac_n "checking for gcc... $ac_c" 1>&6
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for dir in $PATH; do
- IFS="$save_ifs"
test -z "$dir" && dir=.
- if test -f $dir/gcc; then
+ if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
CC="gcc"
break
fi
cc_rejected=no
for dir in $PATH; do
test -z "$dir" && dir=.
- if test -f $dir/cc; then
+ if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
if test "$dir/cc" = "/usr/ucb/cc"; then
cc_rejected=yes
continue
# Now see if the compiler is really GCC.
with_gcc=no
echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
- echo "$progname:564: checking whether we are using GNU C" >&5
+ echo "$progname:579: checking whether we are using GNU C" >&5
$rm conftest.c
cat > conftest.c <<EOF
yes;
#endif
EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:572: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:587: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
with_gcc=yes
fi
$rm conftest.c
echo $ac_n "checking for object suffix... $ac_c" 1>&6
$rm conftest*
echo 'int i = 1;' > conftest.c
-echo "$progname:586: checking for object suffix" >& 5
-if { (eval echo $progname:587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+echo "$progname:601: checking for object suffix" >& 5
+if { (eval echo $progname:602: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
# Append any warnings to the config.log.
cat conftest.err 1>&5
wl='-Qoption ld '
;;
- sysv4.2uw2* | sysv4.3* | sysv5*)
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
pic_flag='-KPIC'
link_static_flag='-Bstatic'
wl='-Wl,'
echo "int some_variable = 0;" > conftest.c
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $pic_flag -DPIC"
- echo "$progname:717: checking if $compiler PIC flag $pic_flag works" >&5
- if { (eval echo $progname:718: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+ echo "$progname:732: checking if $compiler PIC flag $pic_flag works" >&5
+ if { (eval echo $progname:733: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
# Append any warnings to the config.log.
cat conftest.err 1>&5
# Check to see if options -o and -c are simultaneously supported by compiler
echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
$rm conftest*
echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory. Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
save_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -c -o conftest2.o"
-echo "$progname:760: checking if $compiler supports -c -o file.o" >&5
-if { (eval echo $progname:761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest2.o; then
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:785: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test -s conftest.err; then
+ if test -s out/conftest.err; then
echo "$ac_t"no 1>&6
compiler_c_o=no
else
fi
else
# Append any errors to the config.log.
- cat conftest.err 1>&5
+ cat out/conftest.err 1>&5
compiler_c_o=no
echo "$ac_t"no 1>&6
fi
CFLAGS="$save_CFLAGS"
-$rm conftest*
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
if test x"$compiler_c_o" = x"yes"; then
# Check to see if we can write to a .lo
echo "int some_variable = 0;" > conftest.c
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -c -o conftest.lo"
- echo "$progname:788: checking if $compiler supports -c -o file.lo" >&5
-if { (eval echo $progname:789: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+ echo "$progname:818: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
echo "int some_variable = 0;" > conftest.c
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
- echo "$progname:840: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
- if { (eval echo $progname:841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+ echo "$progname:870: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+ if { (eval echo $progname:871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
echo 'main(){return(0);}' > conftest.c
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:884: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+echo "$progname:914: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
echo "$ac_t$link_static_flag" 1>&6
else
echo "$ac_t"none 1>&6
if test -z "$LN_S"; then
# Check to see if we can use ln -s, or we need hard links.
echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
- $rm conftestdata
- if ln -s X conftestdata 2>/dev/null; then
- $rm conftestdata
+ $rm conftest.dat
+ if ln -s X conftest.dat 2>/dev/null; then
+ $rm conftest.dat
LN_S="ln -s"
else
LN_S=ln
if test "$with_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
- echo "$progname:917: checking for ld used by GCC" >&5
+ echo "$progname:947: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld... $ac_c" 1>&6
- echo "$progname:941: checking for GNU ld" >&5
+ echo "$progname:971: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
- echo "$progname:944: checking for non-GNU ld" >&5
+ echo "$progname:974: checking for non-GNU ld" >&5
fi
if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
-exclude_expsyms=
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced. Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
case "$host_os" in
cygwin* | mingw*)
fi
;;
-freebsd2* | sunos4*)
- exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
- ;;
-
esac
ld_shlibs=yes
archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
- ;;
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
- wlarc=
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs=no
# then regenerate the def file from the symbol export list, so that
# the compiled dll only exports the symbol export list.
export_symbols_cmds='rm -f $objdir/$soname-ltdll.c~
- sed -e "/^# \/\* ltdll.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+ sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
(cd $objdir && $CC -c $soname-ltdll.c)~
$DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs~
sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
_lt_hint=1;
for symbol in `cat $export_symbols`; do
- echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+ echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
_lt_hint=`expr 1 + \$_lt_hint`;
done~
$CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
;;
+ netbsd*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+ # can we support soname and/or expsyms with a.out? -oliva
+ fi
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
*)
if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
;;
aix4*)
- allow_undefined_flag=
+ hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+ hardcode_libdir_separator=':'
if test "$with_gcc" = yes; then
- if strings `${CC} -print-prog-name=collect2` | \
- grep resolve_lib_name >/dev/null
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
fi
- archive_cmds='$CC -shared ${wl}-bnoentry -o $objdir/$soname $libobjs $deplibs $linkopts'
+ shared_flag='-shared'
else
- always_export_symbols=yes
- archive_expsym_cmds='$CC -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bM:SRE ${wl}-bnoentry'
+ shared_flag='${wl}-bM:SRE'
hardcode_direct=yes
fi
- hardcode_minus_L=yes
- # Though LIBPATH variable hardcodes shlibpath into executable,
- # it doesn't affect searching for -l* libraries; this confuses
- # tests in mdemo.
- hardcode_shlibpath_var=unsupported
- hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=' ${wl}-berok'
+ archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+ archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+ case "$host_os" in aix4.[01]|aix4.[01].*)
+ # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+ always_export_symbols=yes ;;
+ esac
;;
amigaos*)
archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
;;
cygwin* | mingw*)
freebsd1*)
ld_shlibs=no
- can_build_shared=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
- hardcode_minus_L=no # verified on 2.2.6
hardcode_shlibpath_var=no
;;
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
- hardcode_minus_L=no
hardcode_shlibpath_var=no
;;
- hpux9*)
- archive_cmds='$rm $objdir/$soname~$LD -b +s +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib'
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10* | hpux11*)
- archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib $libobjs $deplibs $linkopts'
+ hpux9* | hpux10* | hpux11*)
+ case "$host_os" in
+ hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+ *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+ esac
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
hardcode_direct=yes
- hardcode_minus_L=yes
+ hardcode_minus_L=yes # Not in the search PATH, but as the default
+ # location of the library.
export_dynamic_flag_spec='${wl}-E'
;;
irix5* | irix6*)
if test "$with_gcc" = yes; then
- archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
else
- archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+ archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
osf3* | osf4*)
if test "$with_gcc" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
sco3.2v5*)
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=yes
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
;;
solaris*)
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
+ case "$host_os" in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;;
+ esac
;;
sunos4*)
- # Why do we need -Bstatic? To avoid inter-library dependencies, maybe...
- if test "$with_gcc" = yes; then
- # Use -fPIC here because libgcc is multilibbed
- archive_cmds='$CC -shared ${wl}-Bstatic -fPIC -o $lib $libobjs $deplibs $linkopts'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
- fi
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
+ sysv4)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+
sysv4.3*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
- hardcode_direct=no
- hardcode_minus_L=no
hardcode_shlibpath_var=no
export_dynamic_flag_spec='-Bexport'
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=no
- hardcode_minus_L=no
hardcode_shlibpath_var=no
;;
dgux*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=no
- hardcode_minus_L=no
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
- can_build_shared=no
;;
esac
fi
echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
if test -z "$NM"; then
echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
case "$NM" in
- /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path.
+ [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
solaris*)
symcode='[BDT]'
;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
esac
# If we're using GNU nm, then use its standard symbol codes.
main(){nm_test_var='a';nm_test_func();return(0);}
EOF
- echo "$progname:1447: checking if global_symbol_pipe works" >&5
- if { (eval echo $progname:1448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+ echo "$progname:1507: checking if global_symbol_pipe works" >&5
+ if { (eval echo $progname:1508: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { echo "$progname:1451: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+ if { echo "$progname:1511: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
#endif
EOF
# Now try linking the two files.
- mv conftest.$objext conftestm.$objext
+ mv conftest.$objext conftstm.$objext
save_LIBS="$LIBS"
save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$objext"
+ LIBS="conftstm.$objext"
CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo $progname:1503: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ if { (eval echo $progname:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
pipe_works=yes
else
echo "$progname: failed program was:" >&5
echo "$progname: failed program was:" >&5
cat conftest.c >&5
fi
- $rm conftest*
+ $rm conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
global_symbol_pipe=
fi
done
-echo "$ac_t$pipe_works" 1>&6
+if test "$pipe_works" = yes; then
+ echo "${ac_t}ok" 1>&6
+else
+ echo "${ac_t}failed" 1>&6
+fi
if test -z "$global_symbol_pipe"; then
global_symbol_to_cdecl=
test -n "$runpath_var"; then
# We can hardcode non-existant directories.
- if test "$hardcode_direct" != no && \
- test "$hardcode_minus_L" != no && \
- test "$hardcode_shlibpath_var" != no; then
-
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$hardcode_shlibpath_var" != no &&
+ test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
library_names_spec='${libname}.so'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
;;
bsdi4*)
version_type=linux
library_names_spec='${libname}.so$major ${libname}.so'
soname_spec='${libname}.so'
- finish_cmds='PATH="$PATH:/sbin" ldconfig $libdir'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
deplibs_check_method='file_magic ELF 32-bit LSB shared object'
file_magic_cmd=/usr/bin/file
library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
fi
dynamic_linker='Win32 ld.exe'
- deplibs_check_method='file_magic file format pei*-i386.*architecture: i386'
- file_magic_cmd='objdump -f'
+ deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ file_magic_cmd='${OBJDUMP} -f'
need_lib_prefix=no
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
;;
freebsd1*)
need_version=yes
;;
esac
- finish_cmds='PATH="$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
+ finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
;;
need_lib_prefix=no
need_version=no
shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
soname_spec='${libname}${release}.sl$major'
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
-irix5*)
- version_type=irix
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- shlibpath_var=LD_LIBRARY_PATH
- deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" # or should it be pass_all?
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /lib/libc.so*`
- shlibpath_overrides_runpath=no
- ;;
-
-irix6*)
+irix5* | irix6*)
version_type=irix
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}.so'
- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
- case "$LD" in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
+ soname_spec='${libname}${release}.so.$major'
+ library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+ case "$host_os" in
+ irix5*)
+ libsuff= shlibsuff=
+ # this will be overridden with pass_all, but let us keep it just in case
+ deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- # even though /usr/local/lib is always searched, the man-page says
- # shared libraries should not be installed there if they use an ABI
- # different from -32, so we'd better not search for shared libraries
- # there either
- sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
- deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" # or should it be pass_all?
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
file_magic_cmd=/usr/bin/file
file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ deplibs_check_method='pass_all'
;;
# No shared lib support for Linux oldld, aout, or coff.
need_version=no
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
- finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
version_type=sunos
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
- finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
osf3* | osf4*)
version_type=osf
+ need_version=no
soname_spec='${libname}${release}.so'
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
shlibpath_var=LD_LIBRARY_PATH
- # deplibs_check_method='pass_all'
- # Although pass_all appears to work, it copies symbols from static libraries
- # into shared ones and exports them. So, when a program is linked with two
- # or more libraries that have got copies of the same symbols, link fails
- # This was only tested on osf4:
+ # this will be overridden with pass_all, but let us keep it just in case
deplibs_check_method='file_magic COFF format alpha shared library'
file_magic_cmd=/usr/bin/file
file_magic_test_file=/shlib/libc.so
+ deplibs_check_method='pass_all'
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
need_version=yes
;;
-sysv4.2uw2* | sysv4.3* | sysv5*)
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
soname_spec='${libname}${release}.so$major'
ncr)
deplibs_check_method='pass_all'
;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
esac
;;
# Report the final consequences.
echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+ if test x$can_build_shared = xyes; then
+ test x$enable_win32_dll = xno && can_build_shared=no
+ echo "checking if package supports dlls... $can_build_shared" 1>&6
+ fi
+;;
+esac
+
if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
case "$deplibs_check_method" in
"file_magic "*)
if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
lt_cv_dlopen=no lt_cv_dlopen_libs=
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:1977: checking for dlopen" >&5
+echo "$progname:2063: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1982 "ltconfig"
+#line 2068 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen(); below. */
#include <assert.h>
; return 0; }
EOF
-if { (eval echo $progname:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dlopen=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2022: checking for dlopen in -ldl" >&5
+echo "$progname:2108: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2030 "ltconfig"
+#line 2116 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
dlopen()
; return 0; }
EOF
-if { (eval echo $progname:2040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2059: checking for dld_link in -ldld" >&5
+echo "$progname:2145: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2067 "ltconfig"
+#line 2153 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
dld_link()
; return 0; }
EOF
-if { (eval echo $progname:2077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2096: checking for shl_load" >&5
+echo "$progname:2182: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2101 "ltconfig"
+#line 2187 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load(); below. */
#include <assert.h>
; return 0; }
EOF
-if { (eval echo $progname:2123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shl_load=yes"
else
lt_cv_dlopen="shl_load"
else
echo "$ac_t""no" 1>&6
-echo $ac_n "checking for LoadLibrary""... $ac_c" 1>&6
-echo "$progname:2141: checking for LoadLibrary" >&5
-if eval "test \"`echo '$''{'ac_cv_func_LoadLibrary'+set}'`\" = set"; then
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2227: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 2146 "ltconfig"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char LoadLibrary(); below. */
-#include <assert.h>
+ ac_save_LIBS="$LIBS"
+LIBS="-ldld $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2235 "ltconfig"
+#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char LoadLibrary();
+char shl_load();
int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_LoadLibrary) || defined (__stub___LoadLibrary)
-choke me
-#else
-LoadLibrary();
-#endif
-
+shl_load()
; return 0; }
EOF
-if { (eval echo $progname:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_LoadLibrary=yes"
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$progname: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_LoadLibrary=no"
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
-fi
+LIBS="$ac_save_LIBS"
-if eval "test \"`echo '$ac_cv_func_'LoadLibrary`\" = yes"; then
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
else
echo "$ac_t""no" 1>&6
fi
-
+
fi
for ac_hdr in dlfcn.h; do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2210: checking for $ac_hdr" >&5
+echo "$progname:2289: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2215 "ltconfig"
+#line 2294 "ltconfig"
#include <$ac_hdr>
int fnord = 0;
EOF
ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo $progname:2220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo $progname:2299: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
LIBS="$lt_cv_dlopen_libs $LIBS"
echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2248: checking whether a program can dlopen itself" >&5
+echo "$progname:2327: checking whether a program can dlopen itself" >&5
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_dlopen_self=cross
else
cat > conftest.c <<EOF
-#line 2256 "ltconfig"
+#line 2335 "ltconfig"
#if HAVE_DLFCN_H
#include <dlfcn.h>
if(ptr1 || ptr2) exit(0); } exit(1); }
EOF
-if { (eval echo $progname:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
lt_cv_dlopen_self=yes
else
if test "$lt_cv_dlopen_self" = yes; then
LDFLAGS="$LDFLAGS $link_static_flag"
echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2321: checking whether a statically linked program can dlopen itself" >&5
+echo "$progname:2400: checking whether a statically linked program can dlopen itself" >&5
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_dlopen_self_static=cross
else
cat > conftest.c <<EOF
-#line 2329 "ltconfig"
+#line 2408 "ltconfig"
#if HAVE_DLFCN_H
#include <dlfcn.h>
if(ptr1 || ptr2) exit(0); } exit(1); }
EOF
-if { (eval echo $progname:2375: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
lt_cv_dlopen_self_static=yes
else
case "$ltmain" in
*.sh)
# Now quote all the things that may contain metacharacters.
- for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
- old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+ for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+ old_LD old_LDFLAGS old_LIBS \
+ old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+ AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
reload_flag reload_cmds wl \
pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
thread_safe_flag_spec whole_archive_flag_spec libname_spec \
*)
# Double-quote the variables that need it (for aesthetics).
- for var in old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
- old_LN_S old_DLLTOOL old_AS; do
+ for var in old_CC old_CFLAGS old_CPPFLAGS \
+ old_LD old_LDFLAGS old_LIBS \
+ old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
eval "$var=\\\"\$var\\\""
done
# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
-# LD=$old_LD NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
-# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
# $0$ltconfig_args
#
# Compiler and other test output produced by $progname, useful for
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
# Used on cygwin: assembler.
AS="$AS"
# Additional compiler flags for building library objects.
pic_flag=$pic_flag
-# Does compiler simultaneously support -c and -o options
+# Does compiler simultaneously support -c and -o options?
compiler_c_o=$compiler_c_o
# Can we write directly to a .lo ?
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$deplibs_check_method
-# Command to use when deplibs_check_method == file_magic
+# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"
-# Set to yes if exported symbols are required
+# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols
-# The command to extract exported symbols
+# The commands to list exported symbols.
export_symbols_cmds=$export_symbols_cmds
-# Symbols that should not be listed in the preloaded symbols
+# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$exclude_expsyms
-# Symbols that must always be exported
+# Symbols that must always be exported.
include_expsyms=$include_expsyms
EOF
# NOTE: Changing this file will not affect anything until you rerun ltconfig.
#
# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-$*
-EOF
- exit 0
+ # Avoid inline document here, it may be left over
+ :
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
# Yippee, $echo works!
:
exec $SHELL "$0" --no-reexec ${1+"$@"}
fi
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
# The name of this program.
progname=`$echo "$0" | sed 's%^.*/%%'`
modename="$progname"
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.2f
-TIMESTAMP=" (1.385 1999/03/15 17:24:54)"
+VERSION=1.3
+TIMESTAMP=" (1.385.2.117 1999/04/29 13:07:13)"
default_mode=
help="Try \`$progname --help' for more information."
show_help=
execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
# Parse our command line options once, thoroughly.
while test $# -gt 0
# #undef WIN32_LEAN_AND_MEAN
# #include <stdio.h>
#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
#
# #include <cygwin/cygwin_dll.h>
# DECLARE_CYGWIN_DLL( DllMain );
ltlibs=
module=no
objs=
+ prefer_static_libs=no
preload=no
prev=
prevarg=
do
case "$arg" in
-all-static | -static)
- if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test "X$arg" = "X-all-static"; then
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ else
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
fi
build_libtool_libs=no
build_old_libs=yes
+ prefer_static_libs=yes
break
;;
esac
dlself=yes
elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
fi
prev=
continue
;;
*)
- dlprefiles="$dlprefiles $arg"
- test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
prev=
;;
esac
prev=
continue
;;
- rpath)
- rpath="$rpath $arg"
- prev=
- continue
- ;;
- xrpath)
- xrpath="$xrpath $arg"
+ rpath | xrpath)
+ # We need an absolute path.
+ case "$arg" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
prev=
continue
;;
if test -n "$link_static_flag"; then
compile_command="$compile_command $link_static_flag"
finalize_command="$finalize_command $link_static_flag"
- dlopen_self=$dlopen_self_static
fi
continue
;;
;;
-export-dynamic)
- if test "$export_dynamic" != yes; then
- export_dynamic=yes
- if test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- else
- arg=
- fi
- fi
+ export_dynamic=yes
+ continue
;;
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- $echo "$modename: cannot have more than one -exported-symbols"
+ $echo "$modename: not more than one -exported-symbols argument allowed"
exit 1
fi
- if test "$arg" = "-export-symbols"; then
+ if test "X$arg" = "X-export-symbols"; then
prev=expsyms
else
prev=expsyms_regex
;;
-L*)
- dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ # We need an absolute path.
case "$dir" in
- /* | [A-Za-z]:[/\\]*)
- # Add the corresponding hardcode_libdir_flag, if it is not identical.
- ;;
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
*)
- $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
- exit 1
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ exit 1
+ fi
+ dir="$absdir"
;;
esac
case " $deplibs " in
;;
-l*)
+ if test "$arg" = "-lc"; then
+ case "$host" in
+ *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+ # These systems don't actually have c library (as such)
+ continue
+ ;;
+ esac
+ elif test "$arg" = "-lm"; then
+ case "$host" in
+ *-*-cygwin* | *-*-beos*)
+ # These systems don't actually have math library (as such)
+ continue
+ ;;
+ esac
+ fi
deplibs="$deplibs $arg"
;;
-module)
- if test "$module" != yes; then
- module=yes
- if test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- else
- arg=
- fi
- fi
+ module=yes
+ continue
;;
-
+
-no-undefined)
allow_undefined=no
continue
;;
-R*)
- xrpath="$xrpath "`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ # We need an absolute path.
+ case "$dir" in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit 1
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
continue
;;
if test -z "$pic_flag" && test -n "$link_static_flag"; then
compile_command="$compile_command $link_static_flag"
finalize_command="$finalize_command $link_static_flag"
- dlopen_self=$dlopen_self_static
fi
continue
;;
# it will not redefine variable installed.
installed=yes
+ # Read the .la file
# If there is no directory component, then add one.
case "$arg" in
*/* | *\\*) . $arg ;;
prev=
fi
- if test "$build_libtool_libs" = yes && test -n "$library_names"; then
+ if test -n "$library_names" &&
+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
link_against_libtool_libs="$link_against_libtool_libs $arg"
if test -n "$shlibpath_var"; then
# Make sure the rpath contains only unique directories.
# We need an absolute path.
case "$dir" in
- /* | [A-Za-z]:[/\\]*) absdir="$dir" ;;
+ [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- $echo "$modename: cannot determine absolute directory name of \`$libdir'" 1>&2
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
exit 1
fi
;;
# Skip directories that are in the system default run-time
# search path, unless they have been requested with -R.
case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
+ *" $absdir "*) ;;
*)
case "$compile_rpath " in
*" $absdir "*) ;;
*) compile_rpath="$compile_rpath $absdir"
esac
;;
- esac
+ esac
case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
+ *" $libdir "*) ;;
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
*) finalize_rpath="$finalize_rpath $libdir"
esac
;;
- esac
+ esac
lib_linked=yes
case "$hardcode_action" in
exit 1
fi
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
oldlibs=
# calculate the name of the file, without its directory
outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
fi
- if test -n "$dlfiles$dlprefiles"; then
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
fi
$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
fi
- if test -n "$export_symbols"; then
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
fi
output_objdir="$output_objdir/$objdir"
fi
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
if test -n "$objs"; then
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
exit 1
exit 1
fi
- if test -n "$dlfiles$dlprefiles"; then
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
fi
dependency_libs="$deplibs"
case "$host" in
- *-*-cygwin* | *-*-mingw* | *-*-os2*)
+ *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
# these systems don't actually have a c library (as such)!
;;
*)
droppeddeps=no
case "$deplibs_check_method" in
pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behaviour.
newdeplibs=$deplibs
- ;; # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behaviour.
+ ;;
test_compile)
# This code stresses the "libraries are programs" paradigm to its
# limits. Maybe even breaks it. We compile a program, linking it
# Did it work?
if test $? -eq 0 ; then
ldd_output=`ldd conftest`
- libname=`eval \\$echo \"$libname_spec\"`
- deplib_matches=`eval \\$echo \"$library_names_spec\"`
- set dummy $deplib_matches
- deplib_match=$2
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- newdeplibs="$newdeplibs $i"
- else
- droppeddeps=yes
- echo
- echo "*** Warning: This library needs some functionality provided by $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- fi
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ echo
+ echo "*** Warning: This library needs some functionality provided by $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ fi
else
droppeddeps=yes
echo
fi
done
fi
- deplibs=$newdeplibs
;;
file_magic*)
set dummy $deplibs_check_method
while test -h "$potlib" 2>/dev/null; do
potliblink=`ls -ld $potlib | sed 's/.* -> //'`
case "$potliblink" in
- /*) potlib="$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
- if eval $file_magic_cmd \"\$potlib\" \
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
| sed 10q \
| egrep "$file_magic_regex" > /dev/null; then
newdeplibs="$newdeplibs $a_deplib"
fi
done # Gone through all deplibs.
;;
- none | unknown | *) newdeplibs=""
+ none | unknown | *)
+ newdeplibs=""
if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
grep . >/dev/null; then
else
build_libtool_libs=no
fi
- dlname=
- library_names=
else
echo "*** The inter-library dependencies that have been dropped here will be"
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
fi
fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
fi
- # test again, we may have decided not to build it any more
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
if test "$build_libtool_libs" = yes; then
- deplibs=$newdeplibs
- # Done checking deplibs!
-
# Get the real and link names of the library.
eval library_names=\"$library_names_spec\"
set dummy $library_names
# (e.g. aix) incase we are running --disable-static
for obj in $libobjs; do
oldobj=`$echo "X$obj" | $Xsed -e "$lo2o"`
- test -f $oldobj || ${LN_S} $obj $oldobj
+ if test ! -f $oldobj; then
+ $show "${LN_S} $obj $oldobj"
+ $run ${LN_S} $obj $oldobj || exit $?
+ fi
done
# Use standard objects if they are pic
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
fi
else
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "mkdir $gentop"
+ $run mkdir "$gentop"
+ status=$?
+ if test $status -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ generated="$generated $gentop"
+
for xlib in $convenience; do
# Extract the objects.
- xdir="$xlib"x
- generated="$generated $xdir"
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
$show "${rm}r $xdir"
$run ${rm}r "$xdir"
if test $status -ne 0 && test ! -d "$xdir"; then
exit $status
fi
- $show "(cd $xdir && $AR x ../$xlib)"
- $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
done
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
-
linkopts="$linkopts $flag"
fi
if test -z "$export_symbols"; then
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
$show "generating symbol list for \`$libname.la'"
- export_symbols="$objdir/$libname.exp"
+ export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
eval cmds=\"$export_symbols_cmds\"
IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
fi
- if test -n "$dlfiles$dlprefiles"; then
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
fi
fi
fi
- if test "$dlself" = yes && test "$export_dynamic" = no; then
- $echo "$modename: error: \`-dlopen self' requires \`-export-dynamic'" 1>&2
- exit 1
- fi
-
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
for libdir in $rpath $xrpath; do
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
-
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
-
rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
output_objdir="$output_objdir/$objdir"
fi
+ # Create the binary in the object directory, then wrap it.
+ if test ! -d $output_objdir; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ status=$?
+ if test $status -ne 0 && test ! -d $output_objdir; then
+ exit $status
+ fi
+ fi
+
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$objdir/${output}.nm"
+ nlist="$output_objdir/${outputname}.nm"
- if test -d $objdir; then
- $show "$rm $nlist ${nlist}S ${nlist}T"
- $run $rm "$nlist" "${nlist}S" "${nlist}T"
- else
- $show "$mkdir $objdir"
- $run $mkdir $objdir
- status=$?
- if test $status -ne 0 && test ! -d $objdir; then
- exit $status
- fi
- fi
+ $show "$rm $nlist ${nlist}S ${nlist}T"
+ $run $rm "$nlist" "${nlist}S" "${nlist}T"
# Parse the name list into a source file.
- $show "creating $objdir/$dlsyms"
+ $show "creating $output_objdir/$dlsyms"
- $echo > "$objdir/$dlsyms" "\
+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
if test "$dlself" = yes; then
$show "generating symbol list for \`$output'"
- echo ': @PROGRAM@ ' > "$nlist"
+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$objdir/$output.exp"
+ export_symbols="$output_objdir/$output.exp"
$run $rm $export_symbols
$run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run $rm $export_symbols
- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$objdir/$output.exp"'
- $run eval 'grep -f "$objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
fi
fi
pic_flag_for_symtable=
- case "$host" in
+ case "$host" in
# compiling the symbol table file with pic_flag works around
# a FreeBSD bug that causes programs to crash when -lm is
# linked before any other PIC object. But we must not use
esac
# Now compile the dynamic symbol file.
- $show "(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ $show "(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $C_compiler -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
# Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
# We have no uninstalled library dependencies, so finalize right now.
$show "$link_command"
$run eval "$link_command"
- exit $?
+ status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+ $show "$rm $output_objdir/${outputname}S.${objext}"
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+ exit $status
fi
if test -n "$shlibpath_var"; then
rpath=
for dir in $temp_rpath; do
case "$dir" in
- /* | [A-Za-z]:[/\\]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
# Absolute path.
rpath="$rpath$dir:"
;;
link_command="$compile_var$compile_command$compile_rpath"
relink_command="$finalize_var$finalize_command$finalize_rpath"
- # AGH! Flame the AIX and HP-UX people for me, will ya?
$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
$echo "$modename: \`$output' will be relinked during installation" 1>&2
else
# Replace the output file specification.
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
- # Create the binary in the object directory, then wrap it.
- if test ! -d $output_objdir; then
- $show "$mkdir $output_objdir"
- $run $mkdir $output_objdir
- status=$?
- if test $status -ne 0 && test ! -d $objdir; then
- exit $status
- fi
- fi
-
- # Delete the old output file.
+ # Delete the old output files.
$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
$show "$link_command"
# Quote $echo for shipping.
if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
case "$0" in
- /* | [A-Za-z]:[/\\]*) qecho="$SHELL $0 --fallback-echo";;
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
esac
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
case \"\$destdir\" in
- /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
*) thisdir=\"\$thisdir/\$destdir\" ;;
esac
fi
addlibs="$old_convenience"
fi
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- xdir="$xlib"x
- generated="$generated $xdir"
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "mkdir $xdir"
- $run mkdir "$xdir"
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "mkdir $gentop"
+ $run mkdir "$gentop"
status=$?
- if test $status -ne 0 && test ! -d "$xdir"; then
+ if test $status -ne 0 && test ! -d "$gentop"; then
exit $status
fi
- $show "(cd $xdir && $AR x ../$xlib)"
- $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+ generated="$generated $gentop"
+
+ # Add in members from convenience archives.
+ for xlib in $addlibs; do
+ # Extract the objects.
+ case "$xlib" in
+ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+ *) xabs=`pwd`"/$xlib" ;;
+ esac
+ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+ xdir="$gentop/$xlib"
- oldobjs="$oldobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
- done
+ $show "${rm}r $xdir"
+ $run ${rm}r "$xdir"
+ $show "mkdir $xdir"
+ $run mkdir "$xdir"
+ status=$?
+ if test $status -ne 0 && test ! -d "$xdir"; then
+ exit $status
+ fi
+ $show "(cd $xdir && $AR x $xabs)"
+ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+ done
+ fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
eval cmds=\"$old_archive_from_new_cmds\"
else
+ # Ensure that we have .o objects in place incase we decided
+ # not to build a shared library, and have fallen back to building
+ # static libs even though --disable-static was passed!
+ for oldobj in $oldobjs; do
+ if test ! -f $oldobj; then
+ obj=`$echo "X$oldobj" | $Xsed -e "$o2lo"`
+ $show "${LN_S} $obj $oldobj"
+ $run ${LN_S} $obj $oldobj || exit $?
+ fi
+ done
+
eval cmds=\"$old_archive_cmds\"
fi
IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
# Only create the output if not a dry run.
if test -z "$run"; then
- $echo > $output "\
-# $output - a libtool library file
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ fi
+ $rm $output
+ $echo > $output "\
+# $outputname - a libtool library file
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
# The name that we can dlopen(3).
dlname='$dlname'
revision=$revision
# Is this an already installed library?
-installed=no
+installed=$installed
# Directory that this library needs to be installed in:
libdir='$install_libdir'\
"
-
- $rm "$output_objdir/$outputname"i
- sed 's/^installed=no$/installed=yes/' \
- < "$output" > "$output_objdir/$outputname"i || exit 1
+ done
fi
# Do a symbolic link so that the libtool archive can be found in
fi
fi
case "$destdir" in
- /* | [A-Za-z]:[/\\]*) ;;
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
*)
for file in $files; do
case "$file" in
# Install the pseudo-library for information purposes.
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
instname="$dir/$name"i
- if test ! -f "$instname"; then
- # Just in case it was removed...
- $show "Creating $instname"
- $rm "$instname"
- sed 's/^installed=no$/installed=yes/' "$file" > "$instname"
- fi
$show "$install_prog $instname $destdir/$name"
$run eval "$install_prog $instname $destdir/$name" || exit $?
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
- if test "$finalize" = yes; then
- outputname="/tmp/$$-$file"
+ if test "$finalize" = yes && test -z "$run"; then
+ tmpdir="/tmp"
+ test -n "$TMPDIR" && tmpdir="$TMPDIR"
+ tmpdir="$tmpdir/libtool-$$"
+ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+ else
+ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+ continue
+ fi
+ outputname="$tmpdir/$file"
# Replace the output file specification.
relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
- $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
$show "$relink_command"
if $run eval "$relink_command"; then :
else
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ ${rm}r "$tmpdir"
continue
fi
file="$outputname"
else
- $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
+ $echo "$modename: warning: cannot relink \`$file'" 1>&2
fi
else
# Install the binary that we compiled earlier.
$show "$install_prog$stripme $file $destfile"
$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
- test -n "$outputname" && $rm $outputname
+ test -n "$outputname" && ${rm}r "$tmpdir"
;;
esac
done
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
;;
uninstall)
- $echo
+ $echo \
"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
Remove libraries from an installation directory.
projects / ~andy / gtk / commitdiff