Make control script more configurable

[~andy/csm213a-hw] / hw2 / makefile

diff --git a/hw2/makefile b/hw2/makefile
index 07982822dc6d5f9c0c50a8310a621a3e61e6e3f5..36f60c86d70f0e8370bd42c8c656c2588b928440 100644 (file)
--- a/hw2/makefile
+++ b/hw2/makefile
@@ -1,27 +1,42 @@
-PROG  = mbed
-UART0 = /dev/ttyACM0
-UART1 = /dev/ttyACM1
-OBJS  = main.o test.o serial_irq.o serial_dma.o timer_dma.o
+-include config.mk
+
+# Common settings
+UART0    = /dev/ttyACM0
+UART1    = /dev/ttyACM1
+CLEAN    = control tags
 
 CPPFLAGS =
 LDFLAGS  = -lm
 
-default: info run
-
-control: control.c messages.h
-       gcc -Wall -o $@ $<
-
-run: all control install.sh
-       @./install.sh $(PROG).bin
-       @./control $(UART0) 0
-       @./control $(UART1) 1 sync
+# Common rules
+all: mbed.bin tester.bin control
 
 terms:
-       term /dev/ttyACM0 &
-       term /dev/ttyACM1 &
+       test -c $(UART0) && term $(UART0) &
+       test -c $(UART1) && term $(UART1) &
 
 dist:
        zip mbed.zip makefile ../common.mk *.{c,cpp,h} */*.{cpp,.h}
 
+# Primary mbed (mbed1/mbed2)
+mbed.elf: main.o main_time.o main_emit.o main_comm.o \
+       serial_irq.o serial_dma.o timer_dma.o messages.o
+
+mbed-run: mbed.bin control install.sh
+       @./install.sh $<
+       @./control -d1    $(UART0)
+       @./control -d2    $(UART0)
+       @./control -d2 -y $(UART0)
+
+# Testing mbed (mbed3)
+tester.elf: tester.o serial_irq.o timer_dma.o messages.o
+
+tester-run: tester.bin install.sh
+       @./install.sh $< /dev/sdb /mnt/usb
+
+# Controls programs
+control: control.c messages.h
+       gcc -Wall -o $@ $<
+
 -include ../config.mk
 -include ../common.mk