-#include "mbed.h"\r
-#include "serial_dma.h"\r
-#include "timer_dma.h"\r
-\r
-/**\r
- *\r
- * Only port A, C, and D can do aysnc DMA (p. 67)\r
- *\r
- * DMA Channel Allocation:\r
- * Ch Trigger Description\r
- * 0 gpio timestamp (async event)\r
- * 1 uart1 transmit\r
- * 2 uart2 tx timestamp (time sync xmt)\r
- * 3 uart2 rx timestamp (time sync rcv)\r
- *\r
- * Uart Sources:\r
- * UART 0 UART 1 UART 2\r
- * xmt rcv xmt rcv xmt rcv\r
- * --- --- --- --- --- ---\r
- * A2 A1 --A19 A18-- - -\r
- * A14 A15 - - - -\r
- * B17 B16 - - - -\r
- * - - **C4 C3-- - -\r
- * D7 D6 - - **D3/3 D2/3** <<<\r
- * - - - - **D5/3 D4/3**\r
- * E20 E21 E0 E1 E16 E17\r
- * - - - - E22 E23\r
- *\r
- * Pinout\r
- * A1 B18 E30 C1\r
- * A2 B19 B20 C2\r
- * D3 C0 E23 B3\r
- * A12 C4 E22 B2\r
- * A4 C6 E21 B1\r
- * A5 C7 E20 B0\r
- * C8 C10\r
- * C9 C11 E2 P5-9V\r
- * E3 GND\r
- * A13 C13 E6 GND\r
- * D2 C16 E16 P5V-USB\r
- * D4 A7 E17 P3V3\r
- * D6 A6 E18 RST\r
- * D7 A14 E19 P3V3\r
- * D5 A15 E31 SDA/D5\r
- * GND A15\r
- * VREFH A17\r
- * E0 B9\r
- * E1 --\r
- */\r
-\r
-/* Trigger select options */\r
-\r
-#define TMP_CONF_TRGSEL_EXTRG 0x0 // 0b0000 External trigger pin input (EXTRG_IN)\r
-#define TMP_CONF_TRGSEL_CMP0 0x1 // 0b0001 CMP0 output\r
-#define TMP_CONF_TRGSEL_PIT0 0x4 // 0b0100 PIT trigger 0\r
-#define TMP_CONF_TRGSEL_PIT1 0x5 // 0b0101 PIT trigger 1\r
-#define TMP_CONF_TRGSEL_TPM0 0x8 // 0b1000 TPM0 overflow\r
-#define TMP_CONF_TRGSEL_TPM1 0x9 // 0b1001 TPM1 overflow\r
-#define TMP_CONF_TRGSEL_TPM2 0xA // 0b1010 TPM2 overflow\r
-#define TMP_CONF_TRGSEL_RTCA 0xC // 0b1100 RTC alarm\r
-#define TMP_CONF_TRGSEL_RTCS 0xD // 0b1101 RTC seconds\r
-#define TMP_CONF_TRGSEL_LPTMR 0xE // 0b1110 LPTMR trigger\r
-\r
-/********************\r
- * Data definitions *\r
- ********************/\r
-\r
-// LEDs\r
-extern DigitalOut led1;\r
-extern DigitalOut led2;\r
-\r
-// UARTs\r
-extern Serial uart0;\r
-extern Serial uart1;\r
-extern Serial uart2;\r
-\r
-// Serial DMA\r
-extern sdma_t *sdma0;\r
-extern sdma_t *sdma1;\r
-extern sdma_t *sdma2;\r
-\r
-// Timer DMA\r
-extern tdma_t *tdma0;\r
-extern tdma_t *tdma1;\r
-extern tdma_t *tdma2;\r
-extern tdma_t *tdma3;\r
-\r
-/********\r
- * Main *\r
- ********/\r
-\r
-void test_tpm_init(void)\r
-{\r
- // EXTRG_IN - PTB8 - alt 3\r
- // PTC0 - alt 3\r
- // PTC6 - alt 3\r
-\r
- // Setup System Integration Module\r
- SIM_Type *sim = SIM;\r
-\r
- sim->SCGC5 |= SIM_SCGC5_PORTA_MASK\r
- | SIM_SCGC5_PORTB_MASK\r
- | SIM_SCGC5_PORTC_MASK\r
- | SIM_SCGC5_PORTD_MASK\r
- | SIM_SCGC5_PORTE_MASK\r
- | SIM_SCGC5_LPTMR_MASK;\r
-\r
- sim->SCGC6 |= SIM_SCGC6_TPM0_MASK\r
- | SIM_SCGC6_TPM1_MASK\r
- | SIM_SCGC6_TPM2_MASK\r
- | SIM_SCGC6_DAC0_MASK\r
- | SIM_SCGC6_ADC0_MASK\r
- | SIM_SCGC6_PIT_MASK\r
- | SIM_SCGC6_DMAMUX_MASK\r
- | SIM_SCGC6_RTC_MASK;\r
-\r
- sim->SOPT2 |= SIM_SOPT2_TPMSRC(1);\r
-\r
- sim->SOPT4 = SIM_SOPT4_TPM1CLKSEL_MASK\r
- | SIM_SOPT4_TPM1CH0SRC(3);\r
-\r
- printf("SOPT2:%08lx SCGC5:%08lx SCGC6:%08lx\r\n",\r
- sim->SOPT2, sim->SCGC5, sim->SCGC6);\r
- //SOPT2:05010000 SCGC5:00003f83 SCGC6:07800001\r
-\r
- //sim->SOPT7 |= SIM_SOPT7_ADC0TRGSEL(TMP_CONF_TRGSEL_EXTRG);\r
-\r
- // Setup Port Control\r
- PORT_Type *port = PORTC;\r
-\r
- PORTE->PCR[25] = PORT_PCR_ISF_MASK\r
- | PORT_PCR_IRQC(0x1)\r
- | PORT_PCR_MUX(3) ;\r
-\r
- port->PCR[0] = PORT_PCR_ISF_MASK\r
- | PORT_PCR_IRQC(0x1)\r
- | PORT_PCR_MUX(3)\r
- | PORT_PCR_PE_MASK;\r
-\r
- // Setup Timer/PWM Module\r
- volatile TPM_Type *tpm = TPM1;\r
-\r
- tpm->SC = TPM_SC_PS(0x7)\r
- | TPM_SC_TOF_MASK;\r
-\r
- tpm->CNT = TPM_CNT_COUNT(0);\r
-\r
- tpm->MOD = TPM_CNT_COUNT(0xFFFF);\r
-\r
- tpm->CONTROLS[1].CnV = 0x1234;\r
- tpm->CONTROLS[1].CnSC = TPM_CnSC_CHF_MASK\r
- | TPM_CnSC_CHIE_MASK\r
- | TPM_CnSC_ELSA_MASK;\r
-\r
- //tpm->CONTROLS[0].CnSC = TPM_CnSC_CHF_MASK\r
- // | TPM_CnSC_CHIE_MASK\r
- // | TPM_CnSC_MSB_MASK\r
- // | TPM_CnSC_MSA_MASK\r
- // | TPM_CnSC_ELSB_MASK\r
- // | TPM_CnSC_ELSA_MASK;\r
-\r
- tpm->STATUS = TPM_STATUS_CH0F_MASK\r
- | TPM_STATUS_CH1F_MASK\r
- | TPM_STATUS_CH2F_MASK\r
- | TPM_STATUS_CH3F_MASK\r
- | TPM_STATUS_CH4F_MASK\r
- | TPM_STATUS_CH5F_MASK\r
- | TPM_STATUS_TOF_MASK;\r
-\r
- tpm->CONF = TPM_CONF_TRGSEL(TMP_CONF_TRGSEL_EXTRG)\r
- | TPM_CONF_CSOO_MASK\r
- | TPM_CONF_CSOT_MASK\r
- | TPM_CONF_GTBEEN_MASK\r
- | TPM_CONF_DBGMODE_MASK;\r
-\r
- tpm->SC = TPM_SC_CMOD(1)\r
- | TPM_SC_PS(0x7)\r
- | TPM_SC_TOF_MASK;\r
-\r
- printf("test - %02lx %08lx\r\n", tpm->CONTROLS[1].CnSC, tpm->CONTROLS[1].CnV); wait(0.1);\r
-}\r
-\r
-void test_tpm_run(void)\r
-{\r
- //static DigitalIn pin(PTC0);\r
- //static DigitalIn pin(PTC2);\r
- //static int pin = 0;\r
-\r
- printf("PTC0:%08lx GPCR:%08lx:%08lx - SC:%04lx CNT:%04lx MOD:%04lx STATUS:%04lx CONF:%08lx - CnSC:%02lx CnV:%04lx\r\n",\r
- PORTC->PCR[0], PORTC->GPCHR, PORTC->GPCLR,\r
- TPM1->SC, TPM1->CNT, TPM1->MOD, TPM1->STATUS, TPM1->CONF,\r
- TPM1->CONTROLS[1].CnSC, TPM1->CONTROLS[1].CnV);\r
- TPM1->SC |= TPM_STATUS_TOF_MASK;\r
- TPM1->STATUS |= TPM_STATUS_TOF_MASK;\r
-}\r
-\r
-void test_pit_init(void)\r
-{\r
- //printf("test_pit_init\r\n");\r
-\r
- // Enable\r
- SIM->SCGC6 |= SIM_SCGC6_PIT_MASK;\r
- PIT->MCR = 0;\r
-\r
- // Channel 0\r
- PIT->CHANNEL[0].LDVAL = 0xFFFFFFFF;\r
- PIT->CHANNEL[0].TCTRL = 0;\r
-\r
- // Channel 1\r
- PIT->CHANNEL[1].LDVAL = 0xFFFFFFFF;\r
- PIT->CHANNEL[1].TCTRL = PIT_TCTRL_CHN_MASK;\r
-\r
- // Start timers\r
- PIT->CHANNEL[0].TCTRL |= PIT_TCTRL_TEN_MASK;\r
- PIT->CHANNEL[1].TCTRL |= PIT_TCTRL_TEN_MASK;\r
-\r
-}\r
-\r
-void test_pit_run(void)\r
-{\r
- register volatile uint32_t *tmh asm("r4") = &PIT->LTMR64H;\r
- register volatile uint32_t *tml asm("r5") = &PIT->LTMR64L;\r
-\r
- register uint32_t hi0 asm("r0"), lo0 asm("r1");\r
- register uint32_t hi1 asm("r2"), lo1 asm("r3");\r
-\r
- asm("ldr %0, [%4]\n\t" // Two clocks per load\r
- "ldr %1, [%5]\n\t"\r
- "ldr %2, [%4]\n\t"\r
- "ldr %3, [%5]\n\t"\r
- : "=r"(hi0), "=r"(lo0), "=r"(hi1), "=r"(lo1)\r
- : "r"(tmh), "r"(tml));\r
-\r
- uint64_t tm0 = ~((uint64_t)hi0 << 32 | lo0);\r
- uint64_t tm1 = ~((uint64_t)hi1 << 32 | lo1);\r
- double bus = 24E6; // 24 MHz bus clock\r
-\r
- printf(" - pit");\r
- printf(" %08lx:%08lx", (uint32_t)(tm0>>32), (uint32_t)tm0);\r
- printf(" %08lx:%08lx", (uint32_t)(tm1>>32), (uint32_t)tm1);\r
- printf(" %08lx", (uint32_t)(tm1-tm0));\r
- printf(" %f", (double)tm0 / bus);\r
-}\r
-\r
-void test_sdma_init(void)\r
-{\r
- sdma0 = sdma_open(SDMA_UART0, SDMA_CHANNEL0, SDMA_CHANNEL1);\r
- sdma1 = sdma_open(SDMA_UART1, SDMA_CHANNEL0, SDMA_CHANNEL1);\r
- sdma2 = sdma_open(SDMA_UART2, SDMA_CHANNEL2, SDMA_CHANNEL3);\r
-\r
- sdma_pinmap(sdma1, PTE0, PTE1);\r
- sdma_pinmap(sdma2, PTD3, PTD2);\r
-}\r
-\r
-void test_sdma_run(void)\r
-{\r
- char xmt[32] = "hello, world";\r
- char rcv[32] = {};\r
-\r
- uint64_t tm1, tm2;\r
-\r
- sdma_write(sdma1, xmt, strlen(xmt));\r
- sdma_flush(sdma1, &tm1);\r
-\r
- sdma_read(sdma2, rcv, strlen(xmt));\r
- sdma_wait(sdma2, &tm2);\r
-\r
- printf("send: [%s] -> [%s] ", xmt, rcv);\r
- printf("time: %08lx / %08lx ", (uint32_t)tm1, (uint32_t)tm2);\r
- printf("tag: dir:%08lx in:%08lx\r\n",\r
- FPTD->PDDR, FPTD->PDIR);\r
-\r
- (void)xmt; (void)rcv;\r
- (void)tm1; (void)tm2;\r
-}\r
-\r
-void test_tdma_init(void)\r
-{\r
- tdma_init();\r
-\r
- tdma0 = tdma_open(TDMA_CHAN0, 3, PTA1, PullNone);\r
- tdma1 = tdma_open(TDMA_CHAN1, 3, PTC1, PullNone);\r
- tdma2 = tdma_open(TDMA_CHAN2, 3, PTD3, PullUp);\r
- tdma3 = tdma_open(TDMA_CHAN3, 3, PTD2, PullUp);\r
-}\r
-\r
-void test_tdma_run(void)\r
-{\r
- static uint32_t time0[2];\r
- static uint32_t time1[2];\r
- static uint32_t time2[2];\r
- static uint32_t time3[2];\r
-\r
- tdma_stamp(tdma0, (uint64_t*)&time0);\r
- tdma_stamp(tdma1, (uint64_t*)&time1);\r
- tdma_stamp(tdma2, (uint64_t*)&time2);\r
- tdma_stamp(tdma3, (uint64_t*)&time3);\r
-\r
- tdma_start(tdma0);\r
- tdma_start(tdma1);\r
- tdma_start(tdma2);\r
- tdma_start(tdma3);\r
-\r
- printf(" - timer:");\r
- printf(" %08lx:%08lx", time0[1], time0[0]);\r
- printf(" %08lx:%08lx", time1[1], time1[0]);\r
- printf(" %08lx:%08lx", time2[1], time2[0]);\r
- printf(" %08lx:%08lx", time3[1], time3[0]);\r
- //printf(" do:%08lx", FPTD->PDOR);\r
- //printf(" di:%08lx", FPTD->PDIR);\r
- //printf(" dd:%08lx", FPTD->PDDR);\r
-}\r
-\r
-void test_leds(void)\r
-{\r
- led1 = 1; led2 = 0; wait(0.1);\r
- led1 = 0; led2 = 1; wait(0.1);\r
-}\r
-\r
-void test_main(void)\r
-{\r
- printf("init\r\n");\r
- //test_tpm_init();\r
- //test_pit_init();\r
- //test_sdma_init();\r
- //test_tdma_init();\r
-\r
- printf("run\r\n");\r
- for (int i = 0; true; i++) {\r
- printf("%8d", i);\r
- test_leds();\r
- //test_tpm_run();\r
- //test_pit_run();\r
- //test_sdma_run();\r
- //test_tdma_run();\r
- printf("\r\n");\r
- }\r
-}\r
+#include "mbed.h"
+#include "serial_dma.h"
+#include "timer_dma.h"
+
+/**
+ *
+ * Only port A, C, and D can do aysnc DMA (p. 67)
+ *
+ * DMA Channel Allocation:
+ * Ch Trigger Description
+ * 0 gpio timestamp (async event)
+ * 1 uart1 transmit
+ * 2 uart2 tx timestamp (time sync xmt)
+ * 3 uart2 rx timestamp (time sync rcv)
+ *
+ * Uart Sources:
+ * UART 0 UART 1 UART 2
+ * xmt rcv xmt rcv xmt rcv
+ * --- --- --- --- --- ---
+ * A2 A1 --A19 A18-- - -
+ * A14 A15 - - - -
+ * B17 B16 - - - -
+ * - - **C4 C3-- - -
+ * D7 D6 - - **D3/3 D2/3** <<<
+ * - - - - **D5/3 D4/3**
+ * E20 E21 E0 E1 E16 E17
+ * - - - - E22 E23
+ *
+ * Pinout
+ * A1 B18 E30 C1
+ * A2 B19 B20 C2
+ * D3 C0 E23 B3
+ * A12 C4 E22 B2
+ * A4 C6 E21 B1
+ * A5 C7 E20 B0
+ * C8 C10
+ * C9 C11 E2 P5-9V
+ * E3 GND
+ * A13 C13 E6 GND
+ * D2 C16 E16 P5V-USB
+ * D4 A7 E17 P3V3
+ * D6 A6 E18 RST
+ * D7 A14 E19 P3V3
+ * D5 A15 E31 SDA/D5
+ * GND A15
+ * VREFH A17
+ * E0 B9
+ * E1 --
+ */
+
+/* Trigger select options */
+
+#define TMP_CONF_TRGSEL_EXTRG 0x0 // 0b0000 External trigger pin input (EXTRG_IN)
+#define TMP_CONF_TRGSEL_CMP0 0x1 // 0b0001 CMP0 output
+#define TMP_CONF_TRGSEL_PIT0 0x4 // 0b0100 PIT trigger 0
+#define TMP_CONF_TRGSEL_PIT1 0x5 // 0b0101 PIT trigger 1
+#define TMP_CONF_TRGSEL_TPM0 0x8 // 0b1000 TPM0 overflow
+#define TMP_CONF_TRGSEL_TPM1 0x9 // 0b1001 TPM1 overflow
+#define TMP_CONF_TRGSEL_TPM2 0xA // 0b1010 TPM2 overflow
+#define TMP_CONF_TRGSEL_RTCA 0xC // 0b1100 RTC alarm
+#define TMP_CONF_TRGSEL_RTCS 0xD // 0b1101 RTC seconds
+#define TMP_CONF_TRGSEL_LPTMR 0xE // 0b1110 LPTMR trigger
+
+/********************
+ * Data definitions *
+ ********************/
+
+// LEDs
+extern DigitalOut led1;
+extern DigitalOut led2;
+
+// UARTs
+extern Serial uart0;
+extern Serial uart1;
+extern Serial uart2;
+
+// Serial DMA
+extern sdma_t *sdma0;
+extern sdma_t *sdma1;
+extern sdma_t *sdma2;
+
+// Timer DMA
+extern tdma_t *tdma0;
+extern tdma_t *tdma1;
+extern tdma_t *tdma2;
+extern tdma_t *tdma3;
+
+/********
+ * Main *
+ ********/
+
+void test_tpm_init(void)
+{
+ // EXTRG_IN - PTB8 - alt 3
+ // PTC0 - alt 3
+ // PTC6 - alt 3
+
+ // Setup System Integration Module
+ SIM_Type *sim = SIM;
+
+ sim->SCGC5 |= SIM_SCGC5_PORTA_MASK
+ | SIM_SCGC5_PORTB_MASK
+ | SIM_SCGC5_PORTC_MASK
+ | SIM_SCGC5_PORTD_MASK
+ | SIM_SCGC5_PORTE_MASK
+ | SIM_SCGC5_LPTMR_MASK;
+
+ sim->SCGC6 |= SIM_SCGC6_TPM0_MASK
+ | SIM_SCGC6_TPM1_MASK
+ | SIM_SCGC6_TPM2_MASK
+ | SIM_SCGC6_DAC0_MASK
+ | SIM_SCGC6_ADC0_MASK
+ | SIM_SCGC6_PIT_MASK
+ | SIM_SCGC6_DMAMUX_MASK
+ | SIM_SCGC6_RTC_MASK;
+
+ sim->SOPT2 |= SIM_SOPT2_TPMSRC(1);
+
+ sim->SOPT4 = SIM_SOPT4_TPM1CLKSEL_MASK
+ | SIM_SOPT4_TPM1CH0SRC(3);
+
+ printf("SOPT2:%08lx SCGC5:%08lx SCGC6:%08lx\r\n",
+ sim->SOPT2, sim->SCGC5, sim->SCGC6);
+ //SOPT2:05010000 SCGC5:00003f83 SCGC6:07800001
+
+ //sim->SOPT7 |= SIM_SOPT7_ADC0TRGSEL(TMP_CONF_TRGSEL_EXTRG);
+
+ // Setup Port Control
+ PORT_Type *port = PORTC;
+
+ PORTE->PCR[25] = PORT_PCR_ISF_MASK
+ | PORT_PCR_IRQC(0x1)
+ | PORT_PCR_MUX(3) ;
+
+ port->PCR[0] = PORT_PCR_ISF_MASK
+ | PORT_PCR_IRQC(0x1)
+ | PORT_PCR_MUX(3)
+ | PORT_PCR_PE_MASK;
+
+ // Setup Timer/PWM Module
+ volatile TPM_Type *tpm = TPM1;
+
+ tpm->SC = TPM_SC_PS(0x7)
+ | TPM_SC_TOF_MASK;
+
+ tpm->CNT = TPM_CNT_COUNT(0);
+
+ tpm->MOD = TPM_CNT_COUNT(0xFFFF);
+
+ tpm->CONTROLS[1].CnV = 0x1234;
+ tpm->CONTROLS[1].CnSC = TPM_CnSC_CHF_MASK
+ | TPM_CnSC_CHIE_MASK
+ | TPM_CnSC_ELSA_MASK;
+
+ //tpm->CONTROLS[0].CnSC = TPM_CnSC_CHF_MASK
+ // | TPM_CnSC_CHIE_MASK
+ // | TPM_CnSC_MSB_MASK
+ // | TPM_CnSC_MSA_MASK
+ // | TPM_CnSC_ELSB_MASK
+ // | TPM_CnSC_ELSA_MASK;
+
+ tpm->STATUS = TPM_STATUS_CH0F_MASK
+ | TPM_STATUS_CH1F_MASK
+ | TPM_STATUS_CH2F_MASK
+ | TPM_STATUS_CH3F_MASK
+ | TPM_STATUS_CH4F_MASK
+ | TPM_STATUS_CH5F_MASK
+ | TPM_STATUS_TOF_MASK;
+
+ tpm->CONF = TPM_CONF_TRGSEL(TMP_CONF_TRGSEL_EXTRG)
+ | TPM_CONF_CSOO_MASK
+ | TPM_CONF_CSOT_MASK
+ | TPM_CONF_GTBEEN_MASK
+ | TPM_CONF_DBGMODE_MASK;
+
+ tpm->SC = TPM_SC_CMOD(1)
+ | TPM_SC_PS(0x7)
+ | TPM_SC_TOF_MASK;
+
+ printf("test - %02lx %08lx\r\n", tpm->CONTROLS[1].CnSC, tpm->CONTROLS[1].CnV); wait(0.1);
+}
+
+void test_tpm_run(void)
+{
+ //static DigitalIn pin(PTC0);
+ //static DigitalIn pin(PTC2);
+ //static int pin = 0;
+
+ printf("PTC0:%08lx GPCR:%08lx:%08lx - SC:%04lx CNT:%04lx MOD:%04lx STATUS:%04lx CONF:%08lx - CnSC:%02lx CnV:%04lx\r\n",
+ PORTC->PCR[0], PORTC->GPCHR, PORTC->GPCLR,
+ TPM1->SC, TPM1->CNT, TPM1->MOD, TPM1->STATUS, TPM1->CONF,
+ TPM1->CONTROLS[1].CnSC, TPM1->CONTROLS[1].CnV);
+ TPM1->SC |= TPM_STATUS_TOF_MASK;
+ TPM1->STATUS |= TPM_STATUS_TOF_MASK;
+}
+
+void test_pit_init(void)
+{
+ //printf("test_pit_init\r\n");
+
+ // Enable
+ SIM->SCGC6 |= SIM_SCGC6_PIT_MASK;
+ PIT->MCR = 0;
+
+ // Channel 0
+ PIT->CHANNEL[0].LDVAL = 0xFFFFFFFF;
+ PIT->CHANNEL[0].TCTRL = 0;
+
+ // Channel 1
+ PIT->CHANNEL[1].LDVAL = 0xFFFFFFFF;
+ PIT->CHANNEL[1].TCTRL = PIT_TCTRL_CHN_MASK;
+
+ // Start timers
+ PIT->CHANNEL[0].TCTRL |= PIT_TCTRL_TEN_MASK;
+ PIT->CHANNEL[1].TCTRL |= PIT_TCTRL_TEN_MASK;
+
+}
+
+void test_pit_run(void)
+{
+ register volatile uint32_t *tmh asm("r4") = &PIT->LTMR64H;
+ register volatile uint32_t *tml asm("r5") = &PIT->LTMR64L;
+
+ register uint32_t hi0 asm("r0"), lo0 asm("r1");
+ register uint32_t hi1 asm("r2"), lo1 asm("r3");
+
+ asm("ldr %0, [%4]\n\t" // Two clocks per load
+ "ldr %1, [%5]\n\t"
+ "ldr %2, [%4]\n\t"
+ "ldr %3, [%5]\n\t"
+ : "=r"(hi0), "=r"(lo0), "=r"(hi1), "=r"(lo1)
+ : "r"(tmh), "r"(tml));
+
+ uint64_t tm0 = ~((uint64_t)hi0 << 32 | lo0);
+ uint64_t tm1 = ~((uint64_t)hi1 << 32 | lo1);
+ double bus = 24E6; // 24 MHz bus clock
+
+ printf(" - pit");
+ printf(" %08lx:%08lx", (uint32_t)(tm0>>32), (uint32_t)tm0);
+ printf(" %08lx:%08lx", (uint32_t)(tm1>>32), (uint32_t)tm1);
+ printf(" %08lx", (uint32_t)(tm1-tm0));
+ printf(" %f", (double)tm0 / bus);
+}
+
+void test_sdma_init(void)
+{
+ sdma0 = sdma_open(SDMA_UART0, SDMA_CHANNEL0, SDMA_CHANNEL1);
+ sdma1 = sdma_open(SDMA_UART1, SDMA_CHANNEL0, SDMA_CHANNEL1);
+ sdma2 = sdma_open(SDMA_UART2, SDMA_CHANNEL2, SDMA_CHANNEL3);
+
+ sdma_pinmap(sdma1, PTE0, PTE1);
+ sdma_pinmap(sdma2, PTD3, PTD2);
+}
+
+void test_sdma_run(void)
+{
+ char xmt[32] = "hello, world";
+ char rcv[32] = {};
+
+ uint64_t tm1, tm2;
+
+ sdma_write(sdma1, xmt, strlen(xmt));
+ sdma_flush(sdma1, &tm1);
+
+ sdma_read(sdma2, rcv, strlen(xmt));
+ sdma_wait(sdma2, &tm2);
+
+ printf("send: [%s] -> [%s] ", xmt, rcv);
+ printf("time: %08lx / %08lx ", (uint32_t)tm1, (uint32_t)tm2);
+ printf("tag: dir:%08lx in:%08lx\r\n",
+ FPTD->PDDR, FPTD->PDIR);
+
+ (void)xmt; (void)rcv;
+ (void)tm1; (void)tm2;
+}
+
+void test_tdma_init(void)
+{
+ tdma_init();
+
+ tdma0 = tdma_open(TDMA_CHAN0, 3, PTA1, PullNone);
+ tdma1 = tdma_open(TDMA_CHAN1, 3, PTC1, PullNone);
+ tdma2 = tdma_open(TDMA_CHAN2, 3, PTD3, PullUp);
+ tdma3 = tdma_open(TDMA_CHAN3, 3, PTD2, PullUp);
+}
+
+void test_tdma_run(void)
+{
+ static uint32_t time0[2];
+ static uint32_t time1[2];
+ static uint32_t time2[2];
+ static uint32_t time3[2];
+
+ tdma_stamp(tdma0, (uint64_t*)&time0);
+ tdma_stamp(tdma1, (uint64_t*)&time1);
+ tdma_stamp(tdma2, (uint64_t*)&time2);
+ tdma_stamp(tdma3, (uint64_t*)&time3);
+
+ tdma_start(tdma0);
+ tdma_start(tdma1);
+ tdma_start(tdma2);
+ tdma_start(tdma3);
+
+ printf(" - timer:");
+ printf(" %08lx:%08lx", time0[1], time0[0]);
+ printf(" %08lx:%08lx", time1[1], time1[0]);
+ printf(" %08lx:%08lx", time2[1], time2[0]);
+ printf(" %08lx:%08lx", time3[1], time3[0]);
+ //printf(" do:%08lx", FPTD->PDOR);
+ //printf(" di:%08lx", FPTD->PDIR);
+ //printf(" dd:%08lx", FPTD->PDDR);
+}
+
+void test_leds(void)
+{
+ led1 = 1; led2 = 0; wait(0.1);
+ led1 = 0; led2 = 1; wait(0.1);
+}
+
+void test_main(void)
+{
+ printf("init\r\n");
+ //test_tpm_init();
+ //test_pit_init();
+ //test_sdma_init();
+ //test_tdma_init();
+
+ printf("run\r\n");
+ for (int i = 0; true; i++) {
+ printf("%8d", i);
+ test_leds();
+ //test_tpm_run();
+ //test_pit_run();
+ //test_sdma_run();
+ //test_tdma_run();
+ printf("\r\n");
+ }
+}
projects / ~andy / csm213a-hw / blobdiff