# See COPYING for terms
# Config
-PATH=/lib/mkinit/bin:/bin:/sbin:/usr/bin:/usr/sbin
MKSHELL=/usr/lib/plan9/bin/rc
NPROC=10
# Example
-#start-test:VQPservice -u: start-foo
+#test-start:VQPservice -u: foo-start
# echo starting test
# service -U $target
#
-#stop-test:VQPservice -d: /
+#test-stop:VQPservice -d: /
# echo stopping test
# service -D $target
# Runlevels
-# Make getty wait (for bootchart)
+user = alsa keymap polipo spam
+system = at cron hddtemp hostname hwclock i8k sshd swap syslog
+bare = cpufreq fsclean getty localhost modules mounts uevents utmp
+
default:V: user
-user:V: system `{echo start-^(alsa keymap polipo spam)}
-system:V: bare `{echo start-^(at cron hddtemp hostname hwclock i8k sshd swap syslog)}
-bare:V: `{echo start-^(cpufreq fsclean getty localhost modules mounts uevents)}
+user:V: `{echo $user^-start $system^-start $bare^-start}
+system:V: `{echo $user^-stop $system^-start $bare^-start}
+bare:V: `{echo $user^-stop $system^-stop $bare^-start}
+single:V: `{echo $user^-stop $system^-stop $bare^-stop }
+
+poweroff:V: halt
+ $P poweroff -ndf
+reboot:V: halt
+ $P reboot -ndf
+kexec:V: halt
+ $P reboot -ndfk
# Initial setup/shutdown for mkinit
boot:QVEPservice -u: /
service -U $target
# Kill all process, then remount and sync
-halt:QVE: stop-utmp stop-hwclock stop-alsa
+halt:QVE: utmp-stop hwclock-stop alsa-stop
echo Stopping init
rm -f /lib/mkinit/state/*
$P mount -o remount,ro /
$P sync
+# Bare
+# ----
# Proc, mtab, udev, fstab
-start-mounts:QVPservice -u: boot
+mounts-start:QVPservice -u: boot
echo Starting mounts
$P cat /proc/mounts > /etc/mtab
$P udevd --daemon
service -U $target
# Load kernel modules
-start-modules:QVEPservice -u: boot
+modules-start:QVEPservice -u: boot
echo Starting modules
$P modprobe uvesafb
service -U $target
# Trigger udev uevents
-start-uevents:QVEPservice -u: start-mounts
+uevents-start:QVEPservice -u: mounts-start
echo Starting uevents
$P udevadm trigger
$P udevadm settle '--timeout=10'
service -U $target
# Clean out /tmp and /var/run directories
-start-fsclean:QVPservice -u: boot
+fsclean-start:QVPservice -u: boot
echo Starting fsclean
$P rm -rf /tmp/*
$P rm -rf /var/run/*
service -U $target
# Spawn gettys for tty[456]
-start-getty:QVPservice -u: start-hostname start-utmp
+getty-start:QVPservice -u: hostname-start utmp-start
echo Starting getty
$P respawn /sbin/agetty 38400 tty4 linux &
$P respawn /sbin/agetty 38400 tty5 linux &
$P respawn /sbin/agetty 38400 tty6 linux &
service -U $target
+getty-stop_cmd=pkill agetty
# Spawn qingys for tty[23]
-start-qingy:QVPservice -u: start-hostname start-utmp start-modules start-uevents
+qingy-start:QVPservice -u: hostname-start utmp-start modules-start uevents-start
echo Starting qingy
$P respawn /sbin/qingy tty2 &
$P respawn /sbin/qingy tty3 &
service -U $target
+getty-stop_cmd=pkill qingy
# Login records
-start-utmp:QVPservice -u: start-fsclean
+utmp-start:QVPservice -u: fsclean-start
echo Starting utmp
for (i in /var/run/utmp /var/log/wtmp) {
echo -n > $i
chmod 0664 $i
}
service -U $target
-utmp_stop_cmd=halt -w
+utmp-stop_cmd=halt -w
# CPU freq
-start-cpufreq:QVPservice -u: start-uevents
+cpufreq-start:QVPservice -u: uevents-start
echo Starting cpufreq
cpufreq-set -g ondemand
service -U $target
# Keymap (us-cc = us with ctrl-capslock switched)
-keymap_start_cmd=loadkeys -u us-cc
+keymap-start_cmd=loadkeys -u us-cc
# Localhost
-localhost_start_cmd=ifconfig lo 127.0.0.1
-localhost_stop_cmd=ifconfig lo down
+localhost-start_cmd=ifconfig lo 127.0.0.1
+localhost-stop_cmd=ifconfig lo down
# Set hostname
-hostname_start_cmd=hostname b
+hostname-start_cmd=hostname b
# Kernel parameters
-sysctl_start_cmd=sysctl -p
+sysctl-start_cmd=sysctl -p
# Console
# -------
-at_start_cmd=atd
-cron_start_cmd=cron
-hwclock_start_cmd=hwclock --hctosys --utc
-hwclock_stop_cmd=hwclock --systohc --utc
-swap_start_cmd=swapon -a
-swap_stop_cmd=swapoff -a
-start-syslog:QVPservice -u: start-mounts
+at-start_cmd=atd
+at-stop_cmd=pkill atd
+
+cron-start_cmd=cron
+cron-stop_cmd=pkill cron
+
+hwclock-start_cmd=hwclock --hctosys --utc
+hwclock-stop_cmd=hwclock --systohc --utc
+
+swap-start_cmd=swapon -a
+swap-stop_cmd=swapoff -a
+
+syslog-start:QVPservice -u: mounts-start
echo Starting syslog;
$P syslog-ng
service -U $target
-start-hddtemp:QVPservice -u: start-localhost
+syslog-stop_cmd=pkill syslog
+
+hddtemp-start:QVPservice -u: localhost-start
echo Starting hddtemp
$P hddtemp -d -l 127.0.0.1 /dev/sda
service -U $target
-hddtemp_stop_cmd=pkill hddtemp
+hddtemp-stop_cmd=pkill hddtemp
# Desktop
# -------
-alsa_start_cmd=alsactl restore
-alsa_stop_cmd=alsactl store
-sshd_start_cmd=/usr/sbin/sshd
-start-spam:QVPservice -u: start-localhost
+alsa-start_cmd=alsactl restore
+alsa-stop_cmd=alsactl store
+
+sshd-start_cmd=/usr/sbin/sshd
+sshd-stop_cmd=pkill sshd
+
+spam-start:QVPservice -u: localhost-start
echo Starting spam
$P spamd -d
service -U $target
-start-polipo:QVPservice -u: start-localhost
+spam-stop_cmd=pkill spamd
+
+polipo-start:QVPservice -u: localhost-start
echo Starting poliop
$P polipo
service -U $target
-polipo_stop_cmd=pkill polipo
+polipo-stop_cmd=pkill polipo
# Library
# -------
-start-%:QVPservice -u: boot
- if (~ $#($stem^_start_cmd) 0)
+%-start:QVPservice -u: boot
+ if (~ $#($stem^-start_cmd) 0)
exit 0
echo Starting $stem
- $P $($stem^_start_cmd)
+ $P $($stem^-start_cmd)
service -U $target
-stop-%:QVPservice -d: /
- if (~ $#($stem^_stop_cmd) 0)
+%-stop:QVPservice -d: /
+ if (~ $#($stem^-stop_cmd) 0)
exit 0
echo Stopping $stem
- $P $($stem^_stop_cmd)
+ $P $($stem^-stop_cmd)
service -D $target
-zap-%:QVPservice -d: /
+%-zap:QVPservice -d: /
service -D $target
-status-%:QV:
+%-status:QV:
service -q $target
projects / mkinit / blobdiff