'\" t
.\" ** The above line should force tbl to be used as a preprocessor **
.\"
-.\" Man page for fetchmail
+.\" Manual page in man(7) format with tbl(1) macros for fetchmail
.\"
.\" For license terms, see the file COPYING in this directory.
-.TH fetchmail 1
+.\"
+.TH fetchmail 1 "fetchmail 6.3.7" "fetchmail" "fetchmail reference manual"
.SH NAME
fetchmail \- fetch mail from a POP, IMAP, ETRN, or ODMR-capable server
The
.I fetchmail
program can gather mail from servers supporting any of the common
-mail-retrieval protocols: POP2, POP3, IMAP2bis, IMAP4, and IMAP4rev1.
+mail-retrieval protocols: POP2 (legacy, to be removed from future
+release), POP3, IMAP2bis, IMAP4, and IMAP4rev1.
It can also use the ESMTP ETRN extension and ODMR. (The RFCs describing all
these protocols are listed at the end of this manual page.)
.PP
.PP
If
.I fetchmail
-is used with a POP or an IMAP server, it has two fundamental modes of
+is used with a POP or an IMAP server, it has two fundamental modes of
operation for each user account from which it retrieves mail:
\fIsingledrop\fR- and \fImultidrop\fR-mode. In singledrop-mode,
.I fetchmail
number of different recipients. Therefore,
.I fetchmail
must attempt to deduce the proper "envelope recipient" from the mail
-headers of each message. In this mode of operation
+headers of each message. In this mode of operation,
.I fetchmail
-almost resembles an MTA, however it is important to note that neither
+almost resembles an MTA, however it is important to note that neither
the POP nor IMAP protocols were intended for use in this fashion, and
-hence envelope information is not directly available. Instead,
+hence envelope information is often not directly available. Instead,
.I fetchmail
must resort to a process of informed guess-work in an attempt to
-discover the true envelope recipient of a message. Even if this
+discover the true envelope recipient of a message, unless the ISP stores
+the envelope information in some header (not all do). Even if this
information is present in the headers, the process can
be error-prone and is dependent upon the specific mail server used
for mail retrieval. Multidrop-mode is used when more than one local
methods, since they are based upon the SMTP protocol which
specifically provides the envelope recipient to \fIfetchmail\fR.
.PP
-As each message is retrieved \fIfetchmail\fR normally delivers it via SMTP to
+As each message is retrieved, \fIfetchmail\fR normally delivers it via SMTP to
port 25 on the machine it is running on (localhost), just as though it
were being passed in over a normal TCP/IP link. \fIfetchmail\fR provides
the SMTP server with an envelope recipient derived in the manner described
system. If you are first setting up fetchmail for single-user mode, it
is recommended that you use Novice mode. Expert mode provides complete
control of fetchmail configuration, including the multidrop features.
-In either case, the `Autoprobe' button will tell you the most capable
+In either case, the 'Autoprobe' button will tell you the most capable
protocol a given mailserver supports, and warn you of potential problems
with that server.
.PP
Each server name that you specify following the options on the
command line will be queried. If you don't specify any servers
-on the command line, each `poll' entry in your
+on the command line, each 'poll' entry in your
.I ~/.fetchmailrc
file will be queried.
.PP
To facilitate the use of
.I fetchmail
-in scripts and pipelines, it returns an appropriate exit code upon
+in scripts and pipelines, it returns an appropriate exit code upon
termination -- see EXIT CODES below.
.PP
The following options modify the behavior of \fIfetchmail\fR. It is
working \fI.fetchmailrc\fR file set up.
.PP
Almost all options have a corresponding keyword which can be used to
-declare them in a
+declare them in a
.I .fetchmailrc
file.
.PP
.SS General Options
.TP
.B \-V | \-\-version
-Displays the version information for your copy of
+Displays the version information for your copy of
.IR fetchmail .
No mail fetch is performed.
Instead, for each server specified, all the option information
.B \-s | \-\-silent
Silent mode. Suppresses all progress/status messages that are
normally echoed to standard output during a fetch (but does not
-suppress actual error messages). The --verbose option overrides this.
+suppress actual error messages). The \-\-verbose option overrides this.
.TP
.B \-v | \-\-verbose
-Verbose mode. All control messages passed between
+Verbose mode. All control messages passed between
.I fetchmail
-and the mailserver are echoed to stdout. Overrides --silent.
-Doubling this option (-v -v) causes extra diagnostic information
-to be printed.
+and the mailserver are echoed to stdout. Overrides \-\-silent.
+Doubling this option (\-v \-v) causes extra diagnostic information
+to be printed.
.SS Disposal Options
.TP
-.B \-a | \-\-all
-(Keyword: fetchall)
+.B \-a | \-\-all | (since v6.3.3) \-\-fetchall
+(Keyword: fetchall, since v3.0)
Retrieve both old (seen) and new messages from the mailserver. The
default is to fetch only messages the server has not marked seen.
Under POP3, this option also forces the use of RETR rather than TOP.
-Note that POP2 retrieval behaves as though --all is always on (see
+Note that POP2 retrieval behaves as though \-\-all is always on (see
RETRIEVAL FAILURE MODES below) and this option does not work with ETRN
-or ODMR.
+or ODMR. While the \-a and \-\-all command-line and fetchall rcfile
+options have been supported for a long time, the \-\-fetchall
+command-line option was added in v6.3.3.
.TP
.B \-k | \-\-keep
(Keyword: keep)
-Keep retrieved messages on the remote mailserver. Normally, messages
+Keep retrieved messages on the remote mailserver. Normally, messages
are deleted from the folder on the mailserver after they have been retrieved.
-Specifying the
-.B keep
-option causes retrieved messages to remain in your folder on the
-mailserver. This option does not work with ETRN or ODMR.
+Specifying the \fBkeep\fR option causes retrieved messages to remain in
+your folder on the mailserver. This option does not work with ETRN or
+ODMR. If used with POP3, it is recommended to also specify the \-\-uidl
+option or uidl keyword.
.TP
.B \-K | \-\-nokeep
(Keyword: nokeep)
\&\fI.fetchmailrc\fR. This option is forced on with ETRN and ODMR.
.TP
.B \-F | \-\-flush
-POP3/IMAP only. Delete old (previously retrieved) messages from the
-mailserver before retrieving new messages. This option does not work
-with ETRN or ODMR. Warning: if your local MTA hangs and fetchmail is
-aborted, the next time you run fetchmail, it will delete mail that was
-never delivered to you. What you probably want is the default
-setting: if you don't specify `-k', then fetchmail will automatically
-delete messages after successful delivery.
+POP3/IMAP only. This is a dangerous option and can cause mail loss when
+used improperly. It deletes old (seen) messages from the mailserver
+before retrieving new messages. \fBWarning:\fR This can cause mail loss if
+you check your mail with other clients than fetchmail, and cause
+fetchmail to delete a message it had never fetched before. It can also
+cause mail loss if the mail server marks the message seen after
+retrieval (IMAP2 servers). You should probably not use this option in your
+configuration file. If you use it with POP3, you must use the 'uidl'
+option. What you probably want is the default setting: if you don't
+specify '\-k', then fetchmail will automatically delete messages after
+successful delivery.
+.TP
+.B \-\-limitflush
+POP3/IMAP only, since version 6.3.0. Delete oversized messages from the
+mailserver before retrieving new messages. The size limit should be
+separately specified with the \-\-limit option. This option does not
+work with ETRN or ODMR.
.SS Protocol and Query Options
.TP
-.B \-p <proto> | \-\-protocol <proto>
+.B \-p <proto> | \-\-proto <proto> | \-\-protocol <proto>
(Keyword: proto[col])
-Specify the protocol to use when communicating with the remote
+Specify the protocol to use when communicating with the remote
mailserver. If no protocol is specified, the default is AUTO.
-.I proto
+.I proto
may be one of the following:
.RS
.IP AUTO
Tries IMAP, POP3, and POP2 (skipping any of these for which support
has not been compiled in).
.IP POP2
-Post Office Protocol 2
+Post Office Protocol 2 (legacy, to be removed from future release)
.IP POP3
Post Office Protocol 3
.IP APOP
.IP SDPS
Use POP3 with Demon Internet's SDPS extensions.
.IP IMAP
-IMAP2bis, IMAP4, or IMAP4rev1 (\fIfetchmail\fR autodetects their capabilities).
+IMAP2bis, IMAP4, or IMAP4rev1 (\fIfetchmail\fR automatically detects their capabilities).
.IP ETRN
Use the ESMTP ETRN option.
.IP ODMR
.B \-U | \-\-uidl
(Keyword: uidl)
Force UIDL use (effective only with POP3). Force client-side tracking
-of `newness' of messages (UIDL stands for ``unique ID listing'' and is
-described in RFC1939). Use with `keep' to use a mailbox as a baby
+of 'newness' of messages (UIDL stands for "unique ID listing" and is
+described in RFC1939). Use with 'keep' to use a mailbox as a baby
news drop for a group of users. The fact that seen messages are skipped
is logged, unless error logging is done through syslog while running in
daemon mode. Note that fetchmail may automatically enable this option
depending on upstream server capabilities. Note also that this option
-may be removed and forced enabled in a future fetchmail version.
-
+may be removed and forced enabled in a future fetchmail version. See
+also: \-\-idfile.
+.TP
+.B \-\-idle (since 6.3.3)
+(Keyword: idle, since before 6.0.0)
+Enable IDLE use (effective only with IMAP). Note that this works with
+only one folder at a given time. While the idle rcfile keyword had been
+supported for a long time, the \-\-idle command-line option was added in
+version 6.3.3. IDLE use means that fetchmail tells the IMAP server to
+send notice of new messages, so they can be retrieved sooner than would
+be possible with regular polls.
.TP
-.B \-P <portnumber> | \-\-port <portnumber>
+.B \-P <portnumber> | \-\-service <servicename>
+(Keyword: service) Since version 6.3.0.
+The service option permits you to specify a service name to connect to.
+You can specify a decimal port number here, if your services database
+lacks the required service-port assignments. See the FAQ item R12 and
+the \-\-ssl documentation for details. This replaces the older \-\-port
+option.
+.TP
+.B \-\-port <portnumber>
(Keyword: port)
-The port option permits you to specify a TCP/IP port to connect on.
-This option will seldom be necessary as all the supported protocols have
-well-established default port numbers.
+Obsolete version of \-\-service that does not take service names.
+.B Note:
+this option may be removed from a future version.
.TP
.B \-\-principal <principal>
(Keyword: principal)
The principal option permits you to specify a service principal for
mutual authentication. This is applicable to POP3 or IMAP with Kerberos
authentication.
-.TP
-.B \-t <seconds> | -\-timeout <seconds>
+.TP
+.B \-t <seconds> | \-\-timeout <seconds>
(Keyword: timeout)
The timeout option allows you to set a server-nonresponse
timeout in seconds. If a mailserver does not send a greeting message
\fIfetchmail\fR will hang up on it. Without such a timeout
\fIfetchmail\fR might hang up indefinitely trying to fetch mail from a
down host. This would be particularly annoying for a \fIfetchmail\fR
-running in background. There is a default timeout which fetchmail -V
-will report. If a given connection receives too many timeouts in
+running in background. There is a default timeout which fetchmail\~\-V
+will report. If a given connection receives too many timeouts in
succession, fetchmail will consider it wedged and stop retrying,
the calling user will be notified by email if this happens.
.TP
.TP
.B \-\-tracepolls
(Keyword: tracepolls)
-Tell fetchmail to poll trace information in the form `polling %s
-account %s' to the Received line it generates, where the %s parts are
-replaced by the user's remote name and the poll label (the Received
-header also normally includes the server's true name). This can be
-used to facilitate mail filtering based on the account it is being
-received from.
+Tell fetchmail to poll trace information in the form 'polling %s
+account %s' and 'folder %s' to the Received line it generates,
+where the %s parts are replaced by the user's remote name, the poll
+label, and the folder (mailbox) where available (the Received header
+also normally includes the server's true name). This can be used to
+facilitate mail filtering based on the account it is being received
+from. The folder information is written only since version 6.3.4.
.TP
.B \-\-ssl
(Keyword: ssl)
Causes the connection to the mail server to be encrypted via SSL. Connect
to the server using the specified base protocol over a connection secured
-by SSL. SSL support must be present at the server. If no port is
-specified, the connection is attempted to the well known port of the SSL
-version of the base protocol. This is generally a different port than the
-port used by the base protocol. For IMAP, this is port 143 for the clear
-protocol and port 993 for the SSL secured protocol.
+by SSL. This option defeats TLS negotiation. Use \-\-sslcertck to
+validate the certificates presented by the server.
+.sp
+Note that fetchmail may still try to negotiate TLS even if this option
+is not given. You can use the \-\-sslproto option to defeat this
+behavior or tell fetchmail to negotiate a particular SSL protocol.
+.sp
+If no port is specified, the connection is attempted to the well known
+port of the SSL version of the base protocol. This is generally a
+different port than the port used by the base protocol. For IMAP, this
+is port 143 for the clear protocol and port 993 for the SSL secured
+protocol, for POP3, it is port 110 for the clear text and port 995 for
+the encrypted variant.
+.sp
+If your system lacks the corresponding entries from /etc/services, see
+the \-\-service option and specify the numeric port number as given in
+the previous paragraph (unless your ISP had directed you to different
+ports, which is uncommon however).
.TP
.B \-\-sslcert <name>
(Keyword: sslcert)
servers may not request it at all. It may be the same file
as the private key (combined key and certificate file) but this is not
recommended.
+.sp
+.B NOTE:
+If you use client authentication, the user name is fetched from the
+certificate's CommonName and overrides the name set with \-\-user.
.TP
.B \-\-sslkey <name>
(Keyword: sslkey)
.TP
.B \-\-sslproto <name>
(Keyword: sslproto)
-Forces an SSL protocol. Possible values are \&`\fBssl2\fR', `\fBssl3\fR' and
-`\fBtls1\fR'. Try this if the default handshake does not work for your server.
+Forces an SSL or TLS protocol. Possible values are '\fBSSL2\fR',
+\&'\fBSSL3\fR', '\fBSSL23\fR', and '\fBTLS1\fR'. Try this if the default
+handshake does not work for your server. Use this option with
+'\fBTLS1\fR' to enforce a TLS connection. To defeat opportunistic TLSv1
+negotiation when the server advertises STARTTLS or STLS, use \fB''\fR.
+This option, even if the argument is the empty string, will also
+suppress the diagnostic 'SERVER: opportunistic upgrade to TLS.' message
+in verbose mode. The default is to try appropriate protocols depending
+on context.
.TP
.B \-\-sslcertck
(Keyword: sslcertck)
Causes fetchmail to strictly check the server certificate against a set of
local trusted certificates (see the \fBsslcertpath\fR option). If the server
-certificate is not signed by one of the trusted ones (directly or indirectly),
-the SSL connection will fail. This checking should prevent man-in-the-middle
-attacks against the SSL connection. Note that CRLs are seemingly not currently
-supported by OpenSSL in certificate verification! Your system clock should
-be reasonably accurate when using this option!
+certificate cannot be obtained or is not signed by one of the trusted ones
+(directly or indirectly), the SSL connection will fail, regardless of
+the \fBsslfingerprint\fR option.
+Note that CRL are only supported in OpenSSL 0.9.7 and newer! Your system
+clock should also be reasonably accurate when using this option.
+.IP
+Note that this optional behavior may become default behavior in future
+fetchmail versions.
.TP
.B \-\-sslcertpath <directory>
(Keyword: sslcertpath)
and the one fetchmail uses to report the fingerprint when an SSL connection
is established. When this is specified, fetchmail will compare the server key
fingerprint with the given one, and the connection will fail if they do not
-match. This can be used to prevent man-in-the-middle attacks.
+match regardless of the \fBsslcertck\fR setting. The connection will
+also fail if fetchmail cannot obtain an SSL certificate from the server.
+This can be used to prevent man-in-the-middle attacks, but the finger
+print from the server needs to be obtained or verified over a secure
+channel, and certainly not over the same Internet connection that
+fetchmail would use.
+.IP
+Using this option will prevent printing certificate verification errors
+as long as \-\-sslcertck is unset.
+.IP
+To obtain the fingerprint of a certificate stored in the file cert.pem,
+try:
+.sp
+.nf
+ openssl x509 \-in cert.pem \-noout \-md5 \-fingerprint
+.fi
+.sp
+For details, see
+.BR x509 (1ssl).
.SS Delivery Control Options
.TP
.B \-S <hosts> | \-\-smtphost <hosts>
(Keyword: smtp[host])
Specify a hunt list of hosts to forward mail to (one or more
hostnames, comma-separated). Hosts are tried in list order; the first
-one that is up becomes the forwarding target for the current run.
-Normally, `localhost' is added to the end of the list as an invisible
-default. However, when using Kerberos authentication, the FQDN of the
-machine running fetchmail is added to the end of the list as an
-invisible default. Each hostname may have a port number following the
-host name. The port number is separated from the host name by a
-slash; the default port is 25 (or ``smtp'' under IPv6). If you
-specify an absolute path name (beginning with a /), it will be
-interpreted as the name of a UNIX socket accepting LMTP connections
-(such as is supported by the Cyrus IMAP daemon) Example:
+one that is up becomes the forwarding target for the current run. If
+this option is not specified, 'localhost' is used as the default.
+Each hostname may have a port number following the host name. The
+port number is separated from the host name by a slash; the default
+port is "smtp". If you specify an absolute path name (beginning with
+a /), it will be interpreted as the name of a UNIX socket accepting
+LMTP connections (such as is supported by the Cyrus IMAP daemon)
+Example:
.sp
.nf
- --smtphost server1,server2/2525,server3,/var/imap/socket/lmtp
+ \-\-smtphost server1,server2/2525,server3,/var/imap/socket/lmtp
.fi
.sp
This option can be used with ODMR, and will make fetchmail a relay
between the ODMR server and SMTP or LMTP receiver.
-.TP
+.TP
.B \-\-fetchdomains <hosts>
(Keyword: fetchdomains)
In ETRN or ODMR mode, this option specifies the list of domains the
server should ship mail for once the connection is turned around. The
-default is the FQDN of the machine running
+default is the FQDN of the machine running
.IR fetchmail .
.TP
.B \-D <domain> | \-\-smtpaddress <domain>
(Keyword: smtpaddress) Specify the domain to be appended to addresses
-in RCPT TO lines shipped to SMTP. The name of the SMTP server (as
-specified by --smtphost, or defaulted to "localhost") is used when
-this is not specified.
+in RCPT TO lines shipped to SMTP. When this is not specified, the name
+of the SMTP server (as specified by \-\-smtphost) is used for SMTP/LMTP
+and 'localhost' is used for UNIX socket/BSMTP.
.TP
.B \-\-smtpname <user@domain>
-(Keyword: smtpname)
+(Keyword: smtpname)
Specify the domain and user to be put in RCPT TO lines shipped to SMTP.
The default user is the current local user.
.TP
.B \-Z <nnn> | \-\-antispam <nnn[, nnn]...>
-(Keyword: antispam)
+(Keyword: antispam)
Specifies the list of numeric SMTP errors that are to be interpreted
-as a spam-block response from the listener. A value of -1 disables
+as a spam-block response from the listener. A value of \-1 disables
this option. For the command-line option, the list values should
be comma-separated.
.TP
.B \-m <command> | \-\-mda <command>
(Keyword: mda) You can force mail to be passed to an MDA directly
-(rather than forwarded to port 25) with the --mda or -m option. To
-avoid losing mail, use this option only with MDAs like maildrop, procmail or
-sendmail that return a nonzero status on disk-full and other
+(rather than forwarded to port 25) with the \-\-mda or \-m option. To
+avoid losing mail, use this option only with MDAs like maildrop or
+MTAs like sendmail that return a nonzero status on disk-full and other
resource-exhaustion errors; the nonzero status tells fetchmail that
delivery failed and prevents the message from being deleted off the
server. If \fIfetchmail\fR is running as root, it sets its user id to
that of the target user while delivering mail through an MDA. Some
-possible MDAs are "/usr/sbin/sendmail -i -f %F %T", "/usr/bin/deliver"
-and "/usr/bin/procmail -d %T" (but the latter is usually redundant as
-it's what SMTP listeners normally forward to). Local delivery
+possible MDAs are "/usr/sbin/sendmail \-i \-f %F \-\- %T" (\fBNote:\fR
+some several older or vendor sendmail versions mistake \-\- for an
+address, rather than an indicator to mark the end of the option arguments),
+"/usr/bin/deliver" and "/usr/bin/maildrop \-d %T". Local delivery
addresses will be inserted into the MDA command wherever you place a
%T; the mail message's From address will be inserted where you place
an %F. \fBDO NOT ENCLOSE THE %F OR %T STRING IN SINGLE QUOTES!\fR For
both %T and %F, fetchmail encloses the addresses in single quotes ('),
after removing any single quotes they may contain, before the MDA
command is passed to the shell. Do \fINOT\fR use an MDA invocation
-like "sendmail -i -t" that dispatches on the contents of To/Cc/Bcc, it
+like "sendmail \-i \-t" that dispatches on the contents of To/Cc/Bcc, it
will create mail loops and bring the just wrath of many postmasters
down upon your head. Also, do \fInot\fR try to combine multidrop
-mode with an MDA such as procmail that can only accept one address;
-you will lose mail.
-.TP
+mode with an MDA such as maildrop that can only accept one
+address; you will lose mail.
+
+A word of warning: the well-known
+.BR procmail (1)
+package is very hard to configure properly, it has a very nasty "fall
+through to the next rule" behavior on delivery errors (even temporary
+ones, such as out of disk space if another user's mail daemon copies the
+mailbox around to purge old messages), so your mail will end up in the
+wrong mailbox sooner or later. The proper procmail configuration is
+outside the scope of this document though. Using
+.BR maildrop (1)
+is usually much easier, and many users find the filter syntax used by
+maildrop easier to understand.
+
+.TP
.B \-\-lmtp
(Keyword: lmtp)
Cause delivery via LMTP (Local Mail Transfer Protocol). A service
-port \fImust\fR be explicitly specified (with a slash suffix) on each
-host in the smtphost hunt list if this option is selected; the
-default port 25 will (in accordance with RFC 2033) not be accepted.
+host and port \fBmust\fR be explicitly specified on each host in the
+smtphost hunt list (see above) if this option is selected; the default
+port 25 will (in accordance with RFC 2033) not be accepted.
.TP
.B \-\-bsmtp <filename>
(keyword: bsmtp)
Append fetched mail to a BSMTP file. This simply contains the SMTP
commands that would normally be generated by fetchmail when passing
-mail to an SMTP listener daemon. An argument of `-' causes the mail
+mail to an SMTP listener daemon. An argument of '\-' causes the mail
to be written to standard output. Note that fetchmail's
reconstruction of MAIL FROM and RCPT TO lines is not guaranteed
correct; the caveats discussed under THE USE AND ABUSE OF MULTIDROP
foreground sessions, the progress messages will note that they are
"oversized"). If the fetch protocol permits (in particular, under
IMAP or POP3 without the fetchall option) the message will not be
-marked seen. An explicit --limit of 0 overrides any limits set in your
+marked seen.
+.sp
+An explicit \-\-limit of 0 overrides any limits set in your
run control file. This option is intended for those needing to
strictly control fetch time due to expensive and variable phone rates.
-Combined with --flush, it can be used to delete oversized messages
-waiting on a server UNLESS in daemon mode. In daemon mode, oversize
-notifications are mailed to the calling user (see the --warnings
-option) and the messages remain on the server.
-This option does not work with ETRN or ODMR.
+.sp
+Combined with \-\-limitflush, it can be used to delete oversized
+messages waiting on a server. In daemon mode, oversize notifications
+are mailed to the calling user (see the \-\-warnings option). This
+option does not work with ETRN or ODMR.
.TP
.B \-w <interval> | \-\-warnings <interval>
(Keyword: warnings)
Takes an interval in seconds. When you call
.I fetchmail
-with a `limit' option in daemon mode, this controls the interval at
+with a 'limit' option in daemon mode, this controls the interval at
which warnings about oversized messages are mailed to the calling user
-(or the user specified by the `postmaster' option). One such
+(or the user specified by the 'postmaster' option). One such
notification is always mailed at the end of the the first poll that
-the oversized message is detected. Thereafter, renotification is
+the oversized message is detected. Thereafter, re-notification is
suppressed until after the warning interval elapses (it will take
place at the end of the first following poll).
.TP
(Keyword: batchlimit)
Specify the maximum number of messages that will be shipped to an SMTP
listener before the connection is deliberately torn down and rebuilt
-(defaults to 0, meaning no limit). An explicit --batchlimit of 0
+(defaults to 0, meaning no limit). An explicit \-\-batchlimit of 0
overrides any limits set in your run control file. While
\fBsendmail\fR(8) normally initiates delivery of a message immediately
after receiving the message terminator, some SMTP listeners are not so
.B \-B <number> | \-\-fetchlimit <number>
(Keyword: fetchlimit)
Limit the number of messages accepted from a given server in a single
-poll. By default there is no limit. An explicit --fetchlimit of 0
+poll. By default there is no limit. An explicit \-\-fetchlimit of 0
overrides any limits set in your run control file.
This option does not work with ETRN or ODMR.
.TP
Do a binary instead of linear search for the first unseen UID. Binary
search avoids downloading the UIDs of all mails. This saves time
(especially in daemon mode) where downloading the same set of UIDs in
-each poll is a waste of bandwidth. The number `n' indicates how rarely
+each poll is a waste of bandwidth. The number 'n' indicates how rarely
a linear search should be done. In daemon mode, linear search is used
-once followed by binary searches in `n-1' polls if `n' is greater than
-1; binary search is always used if `n' is 1; linear search is always
-used if `n' is 0. In non-daemon mode, binary search is used if `n' is
-1; otherwise linear search is used.
+once followed by binary searches in 'n-1' polls if 'n' is greater than
+1; binary search is always used if 'n' is 1; linear search is always
+used if 'n' is 0. In non-daemon mode, binary search is used if 'n' is
+1; otherwise linear search is used. The default value of 'n' is 4.
This option works with POP3 only.
.TP
.B \-e <count> | \-\-expunge <count>
-(keyword: expunge)
+(keyword: expunge)
Arrange for deletions to be made final after a given number of
messages. Under POP2 or POP3, fetchmail cannot make deletions final
without sending QUIT and ending the session -- with this option on,
fetchmail will break a long mail retrieval session into multiple
sub-sessions, sending QUIT after each sub-session. This is a good
-defense against line drops on POP3 servers that do not do the
-equivalent of a QUIT on hangup. Under IMAP,
+defense against line drops on POP3 servers. Under IMAP,
.I fetchmail
normally issues an EXPUNGE command after each deletion in order to
force the deletion to be done immediately. This is safest when your
the end of run). This option does not work with ETRN or ODMR.
.SS Authentication Options
.TP
-.B \-u <name> | \-\-username <name>
+.B \-u <name> | \-\-user <name> | \-\-username <name>
(Keyword: user[name])
Specifies the user identification to be used when logging in to the mailserver.
-The appropriate user identification is both server and user-dependent.
-The default is your login name on the client machine that is running
+The appropriate user identification is both server and user-dependent.
+The default is your login name on the client machine that is running
.IR fetchmail .
See USER AUTHENTICATION below for a complete description.
.TP
.B \-I <specification> | \-\-interface <specification>
(Keyword: interface)
Require that a specific interface device be up and have a specific local
-or remote IP address (or range) before polling. Frequently
-.I fetchmail
+or remote IPv4 (IPv6 is not supported by this option yet) address (or
+range) before polling. Frequently \fIfetchmail\fP
is used over a transient point-to-point TCP/IP link established directly
to a mailserver via SLIP or PPP. That is a relatively secure channel.
But when other TCP/IP routes to the mailserver exist (e.g. when the link
is connected to an alternate ISP), your username and password may be
vulnerable to snooping (especially when daemon mode automatically polls
for mail, shipping a clear password over the net at predictable
-intervals). The --interface option may be used to prevent this. When
+intervals). The \-\-interface option may be used to prevent this. When
the specified link is not up or is not connected to a matching IP
address, polling will be skipped. The format is:
.sp
.nf
- interface/iii.iii.iii.iii/mmm.mmm.mmm.mmm
+ interface/iii.iii.iii.iii[/mmm.mmm.mmm.mmm]
.fi
.sp
The field before the first slash is the interface name (i.e. sl0, ppp0
The field after the second slash is a mask which specifies a range of
IP addresses to accept. If no mask is present 255.255.255.255 is
assumed (i.e. an exact match). This option is currently only supported
-under Linux and FreeBSD. Please see the
-.B monitor
+under Linux and FreeBSD. Please see the
+.B monitor
section for below for FreeBSD specific information.
+.sp
+Note that this option may be removed from a future fetchmail version.
.TP
-.B \-M <interface> | --monitor <interface>
+.B \-M <interface> | \-\-monitor <interface>
(Keyword: monitor)
Daemon mode can cause transient links which are automatically taken down
after a period of inactivity (e.g. PPP links) to remain up
skipped. However, when fetchmail is woken up by a signal, the
monitor check is skipped and the poll goes through unconditionally.
This option is currently only supported under Linux and FreeBSD.
-For the
-.B monitor
-and
+For the
+.B monitor
+and
.B interface
options to work for non root users under FreeBSD, the fetchmail binary
must be installed SGID kmem. This would be a security hole, but
fetchmail runs with the effective GID set to that of the kmem group
.I only
when interface data is being collected.
+.sp
+Note that this option may be removed from a future fetchmail version.
.TP
.B \-\-auth <type>
(Keyword: auth[enticate])
This option permits you to specify an authentication type (see USER
AUTHENTICATION below for details). The possible values are \fBany\fR,
-\&`\fBpassword\fR', `\fBkerberos_v5\fR' and `\fBkerberos\fR' (or, for
-excruciating exactness, `\fBkerberos_v4\fR'), \fRgssapi\fR,
-\fIcram-md5\fR, \fIotp\fR, \fIntlm\fR, and \fBssh\fR. When \fBany\fR (the
-default) is specified, fetchmail tries first methods that don't
-require a password (GSSAPI, KERBEROS_IV); then it looks for methods
-that mask your password (CRAM-MD5, X-OTP, NTLM); and only if the server
-doesn't support any of those will it ship your password en clair.
-Other values may be used to force various authentication methods
-(\fBssh\fR suppresses authentication). Any value other than
-\fIpassword\fR, \fIcram-md5\fR, \fIntlm\fR or \fIotp\fR suppresses fetchmail's
-normal inquiry for a password. Specify \fIssh\fR when you are using
-an end-to-end secure connection such as an ssh tunnel; specify
-\fRgssapi\fR or \fBkerberos_v4\fR if you are using a protocol variant
-that employs GSSAPI or K4. Choosing KPOP protocol automatically
-selects Kerberos authentication. This option does not work with ETRN.
+\&\fBpassword\fR, \fBkerberos_v5\fR, \fBkerberos\fR (or, for
+excruciating exactness, \fBkerberos_v4\fR), \fBgssapi\fR,
+\fBcram\-md5\fR, \fBotp\fR, \fBntlm\fR, \fBmsn\fR (only for POP3),
+\fBexternal\fR (only IMAP) and \fBssh\fR.
+When \fBany\fR (the default) is specified, fetchmail tries
+first methods that don't require a password (EXTERNAL, GSSAPI, KERBEROS\ IV,
+KERBEROS\ 5); then it looks for methods that mask your password
+(CRAM-MD5, X\-OTP - note that NTLM and MSN are not autoprobed for POP3
+and MSN is only supported for POP3); and only if the server doesn't
+support any of those will it ship your password en clair. Other values
+may be used to force various authentication methods
+(\fBssh\fR suppresses authentication and is thus useful for IMAP PREAUTH).
+(\fBexternal\fR suppresses authentication and is thus useful for IMAP EXTERNAL).
+Any value other than \fBpassword\fR, \fBcram\-md5\fR, \fBntlm\fR,
+\&\fBmsn\fR or \fBotp\fR suppresses fetchmail's normal inquiry for a
+password. Specify \fBssh\fR when you are using an end-to-end secure
+connection such as an ssh tunnel; specify \fBexternal\fR when you use
+TLS with client authentication and specify \fBgssapi\fR or
+\&\fBkerberos_v4\fR if you are using a protocol variant that employs
+GSSAPI or K4. Choosing KPOP protocol automatically selects Kerberos
+authentication. This option does not work with ETRN.
.SS Miscellaneous Options
.TP
.B \-f <pathname> | \-\-fetchmailrc <pathname>
-Specify a non-default name for the
+Specify a non-default name for the
.I ~/.fetchmailrc
run control file. The pathname argument must be either "-" (a single
dash, meaning to read the configuration from standard input) or a
-filename. Unless the --version option is also on, a named file
+filename. Unless the \-\-version option is also on, a named file
argument must have permissions no more open than 0600 (u=rw,g=,o=) or
else be /dev/null.
.TP
.B \-i <pathname> | \-\-idfile <pathname>
(Keyword: idfile)
Specify an alternate name for the .fetchids file used to save POP3
-UIDs.
+UIDs. NOTE: since fetchmail 6.3.0, write access to the directory
+containing the idfile is required, as fetchmail writes a temporary file
+and renames it into the place of the real idfile only if the temporary
+file has been written successfully. This avoids the truncation of
+idfiles when running out of disk space.
+.TP
+.B \--pidfile <pathname>
+(Keyword: pidfile; since fetchmail v6.3.4)
+Override the default location of the PID file. Default: see
+"ENVIRONMENT" below.
.TP
.B \-n | \-\-norewrite
(Keyword: no rewrite)
Normally,
.I fetchmail
-edits RFC-822 address headers (To, From, Cc, Bcc, and Reply-To) in
+edits RFC-822 address headers (To, From, Cc, Bcc, and Reply\-To) in
fetched mail so that any mail IDs local to the server are expanded to
-full addresses (@ and the mailserver hostname are appended). This enables
+full addresses (@ and the mailserver hostname are appended). This enables
replies on the client to get addressed correctly (otherwise your
mailer might think they should be addressed to local users on the
client machine!). This option disables the rewrite. (This option is
.TP
.B \-E <line> | \-\-envelope <line>
(Keyword: envelope; Multidrop only)
-This option changes the header
+.br
+In the configuration file, an enhanced syntax is used:
+.br
+.B envelope [<count>] <line>
+.sp
+This option changes the header
.I fetchmail
assumes will carry a copy of the mail's envelope address. Normally
-this is `X-Envelope-To' but as this header is not standard, practice
+this is 'X\-Envelope\-To', but as this header is not standard, practice
varies. See the discussion of multidrop address handling below. As a
-special case, `envelope "Received"' enables parsing of sendmail-style
+special case, 'envelope "Received"' enables parsing of sendmail-style
Received lines. This is the default, and it should not be necessary
-unless you have globally disabled Received parsing with `no envelope'
+unless you have globally disabled Received parsing with 'no envelope'
in the \fI.fetchmailrc\fR file.
+.sp
+The optional count argument (only available in the configuration file)
+determines how many header lines of this kind are skipped. A count of 1
+means: skip the first, take the second. A count of 2 means: skip the
+first and second, take the third, and so on.
.TP
.B \-Q <prefix> | \-\-qvirtual <prefix>
(Keyword: qvirtual; Multidrop only)
The string prefix assigned to this option will be removed from the user
name found in the header specified with the \fIenvelope\fR option
(\fIbefore\fR doing multidrop name mapping or localdomain checking,
-if either is applicable). This option is useful if you are using
+if either is applicable). This option is useful if you are using
.I fetchmail
to collect the mail for an entire domain and your ISP (or your mail
redirection provider) is using qmail.
One of the basic features of qmail is the
.sp
-\&`Delivered-To:'
+\&'Delivered\-To:'
.sp
message header. Whenever qmail delivers a message to a local mailbox
it puts the username and hostname of the envelope recipient on this
line. The major reason for this is to prevent mail loops. To set up
qmail to batch mail for a disconnected site the ISP-mailhost will have
-normally put that site in its `Virtualhosts' control file so it will
+normally put that site in its 'Virtualhosts' control file so it will
add a prefix to all mail addresses for this site. This results in mail
.\" The \&@\& tries to stop HTML converters from making a mailto URL here.
sent to 'username\&@\&userhost.userdom.dom.com' having a
-\&`Delivered-To:' line of the form:
+\&'Delivered\-To:' line of the form:
.sp
-Delivered-To: mbox-userstr-username\&@\&userhost.userdom.dom.com
+Delivered\-To: mbox\-userstr\-username\&@\&userhost.example.com
.sp
-The ISP can make the 'mbox-userstr-' prefix anything they choose
+The ISP can make the 'mbox\-userstr\-' prefix anything they choose
but a string matching the user host name is likely.
-By using the option `envelope Delivered-To:' you can make fetchmail reliably
+By using the option 'envelope Delivered\-To:' you can make fetchmail reliably
identify the original envelope recipient, but you have to strip the
-`mbox-userstr-' prefix to deliver to the correct user.
+\&'mbox\-userstr\-' prefix to deliver to the correct user.
This is what this option is for.
.TP
-.B --configdump
-Parse the
+.B \-\-configdump
+Parse the
.I ~/.fetchmailrc
file, interpret any command-line options specified, and dump a
configuration report to standard output. The configuration report is
a data structure assignment in the language Python. This option
-is meant to be used with an interactive
+is meant to be used with an interactive
.I ~/.fetchmailrc
-editor like
+editor like
.IR fetchmailconf ,
written in Python.
+.SS Removed Options
+.TP
+.B \-T | \-\-netsec
+Removed before version 6.3.0, the required underlying inet6_apps library
+had been discontinued and is no longer available.
.SH USER AUTHENTICATION AND ENCRYPTION
All modes except ETRN require authentication of the client to the server.
-Normal user authentication in
+Normal user authentication in
.I fetchmail
-is very much like the authentication mechanism of
+is very much like the authentication mechanism of
.IR ftp (1).
The correct user-id and password depend upon the underlying security
-system at the mailserver.
+system at the mailserver.
.PP
-If the mailserver is a Unix machine on which you have an ordinary user
-account, your regular login name and password are used with
+If the mailserver is a Unix machine on which you have an ordinary user
+account, your regular login name and password are used with
.IR fetchmail .
If you use the same login name on both the server and the client machines,
-you needn't worry about specifying a user-id with the
+you needn't worry about specifying a user-id with the
.B \-u
-option \-\- the default behavior is to use your login name on the
+option -- the default behavior is to use your login name on the
client machine as the user-id on the server machine. If you use a
different login name on the server machine, specify that login name
with the
.B \-u
option. e.g. if your login name is 'jsmith' on a machine named 'mailgrunt',
-you would start
-.I fetchmail
+you would start
+.I fetchmail
as follows:
.IP
-fetchmail -u jsmith mailgrunt
+fetchmail \-u jsmith mailgrunt
.PP
-The default behavior of
+The default behavior of
.I fetchmail
is to prompt you for your mailserver password before the connection is
-established. This is the safest way to use
+established. This is the safest way to use
.I fetchmail
and ensures that your password will not be compromised. You may also specify
your password in your
.I ~/.fetchmailrc
-file. This is convenient when using
+file. This is convenient when using
.I fetchmail
in daemon mode or with scripts.
+.SS Using netrc files
.PP
If you do not specify a password, and
.I fetchmail
cannot extract one from your
.I ~/.fetchmailrc
-file, it will look for a
+file, it will look for a
.I ~/.netrc
file in your home directory before requesting one interactively; if an
entry matching the mailserver is found in that file, the password will
.IR ftp (1)
man page for details of the syntax of the
.I ~/.netrc
-file. (This feature may allow you to avoid duplicating password
-information in more than one file.)
+file. To show a practical example, a .netrc might look like
+this:
+.IP
+.nf
+machine hermes.example.org
+login joe
+password topsecret
+.fi
+.PP
+You can repeat this block with different user information if you need to
+provide more than one password.
+.PP
+This feature may allow you to avoid duplicating password
+information in more than one file.
.PP
-On mailservers that do not provide ordinary user accounts, your user-id and
-password are usually assigned by the server administrator when you apply for
-a mailbox on the server. Contact your server administrator if you don't know
+On mailservers that do not provide ordinary user accounts, your user-id and
+password are usually assigned by the server administrator when you apply for
+a mailbox on the server. Contact your server administrator if you don't know
the correct user-id and password for your mailbox account.
+.SH POP3 VARIANTS
.PP
Early versions of POP3 (RFC1081, RFC1225) supported a crude form of
independent authentication using the
server that it should do special checking. RPOP is supported
by
.I fetchmail
-(you can specify `protocol RPOP' to have the program send `RPOP'
-rather than `PASS') but its use is strongly discouraged. This
+(you can specify 'protocol RPOP' to have the program send 'RPOP'
+rather than 'PASS') but its use is strongly discouraged, and support
+will be removed from a future fetchmail version. This
facility was vulnerable to spoofing and was withdrawn in RFC1460.
.PP
RFC1460 introduced APOP authentication. In this variant of POP3,
you register an APOP password on your server host (the program
to do this with on the server is probably called \fIpopauth\fR(8)). You
-put the same password in your
+put the same password in your
.I ~/.fetchmailrc
-file. Each time
+file. Each time
.I fetchmail
logs in, it sends a cryptographically secure hash of your password and
the server greeting time to the server, which can verify it by
-checking its authorization database.
+checking its authorization database.
+.SS RETR or TOP
+.I fetchmail
+makes some efforts to make the server believe messages had not been
+retrieved, by using the TOP command with a large number of lines when
+possible. TOP is a command that retrieves the full header and
+a \fIfetchmail\fP-specified amount of body lines. It is optional and
+therefore not implemented by all servers, and some are known to
+implement it improperly. On many servers however, the RETR command which
+retrieves the full message with header and body, sets the "seen" flag
+(for instance, in a web interface), whereas the TOP command does not do
+that.
.PP
-If your \fIfetchmail\fR was built with Kerberos support and you specify
-Kerberos authentication (either with --auth or the \fI.fetchmailrc\fR
+.I fetchmail
+will always use the RETR command if "fetchall" is set.
+.I fetchmail
+will also use the RETR command if "keep" is set and "uidl" is unset.
+Finally,
+.I fetchmail
+will use the RETR command on Maillennium POP3/PROXY
+servers (used by Comcast) to avoid a deliberate TOP misinterpretation in
+this server that causes message corruption.
+.PP
+In all other cases,
+.I fetchmail
+will use the TOP command. This implies that in "keep" setups, "uidl"
+must be set if "TOP" is desired.
+.PP
+.B Note
+that this description is true for the current version of fetchmail, but
+the behavior may change in future versions. In particular, fetchmail may
+prefer the RETR command because the TOP command causes much grief on
+some servers and is only optional.
+.SH ALTERNATE AUTHENTICATION FORMS
+.PP
+If your \fIfetchmail\fR was built with Kerberos support and you specify
+Kerberos authentication (either with \-\-auth or the \fI.fetchmailrc\fR
option \fBauthenticate kerberos_v4\fR) it will try to get a Kerberos
ticket from the mailserver at the start of each query. Note: if
-either the pollname or via name is `hesiod', fetchmail will try to use
+either the pollname or via name is 'hesiod', fetchmail will try to use
Hesiod to look up the mailserver.
.PP
If you use POP3 or IMAP with GSSAPI authentication, \fIfetchmail\fR will
-expect the server to have RFC1731- or RFC1734-conformant GSSAPI
+expect the server to have RFC1731- or RFC1734-conforming GSSAPI
capability, and will use it. Currently this has only been tested over
Kerberos V, so you're expected to already have a ticket-granting
ticket. You may pass a username different from your principal name
-using the standard \fB--user\fR command or by the \fI.fetchmailrc\fR
+using the standard \fB\-\-user\fR command or by the \fI.fetchmailrc\fR
option \fBuser\fR.
.PP
-If your IMAP daemon returns the PREAUTH response in its greeting line,
+If your IMAP daemon returns the PREAUTH response in its greeting line,
fetchmail will notice this and skip the normal authentication step.
This can be useful, e.g. if you start imapd explicitly using ssh.
-In this case you can declare the authentication value `ssh' on that
+In this case you can declare the authentication value 'ssh' on that
site entry to stop \fI.fetchmail\fR from asking you for a password
when it starts up.
.PP
+If you use client authentication with \fITLS1\fR and your IMAP daemon
+returns the \fIAUTH=EXTERNAL\fR response, fetchmail will notice this
+and will use the authentication shortcut and will not send the
+passphrase. In this case you can declare the authentication value 'external'
+ on that site to stop \fIfetchmail\fR from asking you for a password
+when it starts up.
+.PP
If you are using POP3, and the server issues a one-time-password
challenge conforming to RFC1938, \fIfetchmail\fR will use your
password as a pass phrase to generate the required response. This
will try to perform an NTLM authentication (instead of sending over the
password en clair) whenever the server returns AUTH=NTLM in its
capability response. Specify a user option value that looks like
-`user@domain': the part to the left of the @ will be passed as the
+\&'user@domain': the part to the left of the @ will be passed as the
username and the part to the right as the NTLM domain.
-.PP
-If you are using IPsec, the -T (--netsec) option can be used to pass
-an IP security request to be used when outgoing IP connections are
-initialized. You can also do this using the `netsec' server option
-in the .fetchmailrc file. In either case, the option value is a
-string in the format accepted by the net_security_strtorequest()
-function of the inet6_apps library.
-.PP
-You can access SSL encrypted services by specifying the --ssl option.
-You can also do this using the "ssl" server option in the .fetchmailrc
-file. With SSL encryption enabled, queries are initiated over a connection
-after negotiating an SSL session. Some services, such as POP3 and IMAP,
-have different well known ports defined for the SSL encrypted services.
-The encrypted ports will be selected automatically when SSL is enabled and
-no explicit port is specified.
-.PP
-When connecting to an SSL encrypted server, the server presents a certificate
+.SS Secure Socket Layers (SSL) and Transport Layer Security (TLS)
+.PP
+You can access SSL encrypted services by specifying the \-\-ssl option.
+You can also do this using the "ssl" user option in the .fetchmailrc
+file. With SSL encryption enabled, queries are initiated over a connection
+after negotiating an SSL session, and the connection fails if SSL cannot
+be negotiated. Some services, such as POP3 and IMAP, have different
+well known ports defined for the SSL encrypted services. The encrypted
+ports will be selected automatically when SSL is enabled and no explicit
+port is specified. The \-\-sslproto option can be used to select the SSL
+protocols (default: v2 or v3). The \-\-sslcertck command line or
+sslcertck run control file option should be used to force strict
+certificate checking - see below.
+.PP
+If SSL is not configured, fetchmail will usually opportunistically try to use
+TLS. TLS can be enforced by using \-\-sslproto "TLS1". TLS
+connections use the same port as the unencrypted version of the
+protocol and negotiate TLS via special parameter. The \-\-sslcertck
+command line or sslcertck run control file option should be used to
+force strict certificate checking - see below.
+.PP
+.B \-\-sslcheck recommended:
+When connecting to an SSL or TLS encrypted server, the server presents a certificate
to the client for validation. The certificate is checked to verify that
the common name in the certificate matches the name of the server being
contacted and that the effective and expiration dates in the certificate
indicate that it is currently valid. If any of these checks fail, a warning
message is printed, but the connection continues. The server certificate
does not need to be signed by any specific Certifying Authority and may
-be a "self-signed" certificate.
+be a "self-signed" certificate. If the \-\-sslcertck command line option
+or sslcertck run control file option is used, fetchmail will instead
+abort if any of these checks fail. Use of the sslcertck or \-\-sslcertck
+option is advised.
.PP
Some SSL encrypted servers may request a client side certificate. A client
side public SSL certificate and private SSL key may be specified. If
.PP
A word of care about the use of SSL: While above mentioned
setup with self-signed server certificates retrieved over the wires
-can protect you from a passive eavesdropper it doesn't help against an
+can protect you from a passive eavesdropper, it doesn't help against an
active attacker. It's clearly an improvement over sending the
-passwords in clear but you should be aware that a man-in-the-middle
+passwords in clear, but you should be aware that a man-in-the-middle
attack is trivially possible (in particular with tools such as dsniff,
-http://www.monkey.org/~dugsong/dsniff/). Use of an ssh tunnel (see
-below for some examples) is preferable if you care seriously about the
-security of your mailbox.
+http://monkey.org/~dugsong/dsniff/). Use of strict certificate checking
+with a certification authority recognized by server and client, or
+perhaps of an SSH tunnel (see below for some examples) is preferable if
+you care seriously about the security of your mailbox and passwords.
+.SS ESMTP AUTH
.PP
.B fetchmail
also supports authentication to the ESMTP server on the client side
according to RFC 2554. You can specify a name/password pair to be
-used with the keywords `esmtpname' and `esmtppassword'; the former
+used with the keywords 'esmtpname' and 'esmtppassword'; the former
defaults to the username of the calling user.
.SH DAEMON MODE
-The
-.B \-\-daemon <interval>
-or
-.B \-d <interval>
-option runs
+.SS Introducing the daemon mode
+In daemon mode,
.I fetchmail
-in daemon mode. You must specify a numeric argument which is a
-polling interval in seconds.
-.PP
-In daemon mode,
-.I fetchmail
-puts itself in background and runs forever, querying each specified
-host and then sleeping for the given polling interval.
-.PP
-Simply invoking
+puts itself into the background and runs forever, querying each
+specified host and then sleeping for a given polling interval.
+.SS Starting the daemon mode
+There are several ways to make fetchmail work in daemon mode. On the
+command line, \fB\-\-daemon\ <interval>\fR or \fB\-d\ <interval>\fR
+option runs \fIfetchmail\fR in daemon mode. You must specify a numeric
+argument which is a polling interval in seconds.
+.PP
+Example: simply invoking
.IP
-fetchmail -d 900
+fetchmail \-d 900
.PP
-will, therefore, poll all the hosts described in your
+will, therefore, poll all the hosts described in your
.I ~/.fetchmailrc
-file (except those explicitly excluded with the `skip' verb) once
-every fifteen minutes.
+file (except those explicitly excluded with the 'skip' verb) once
+every 15 minutes.
.PP
-It is possible to set a polling interval
-in your
-.I ~/.fetchmailrc
-file by saying `set daemon <interval>', where <interval> is an
-integer number of seconds. If you do this, fetchmail will always
-start in daemon mode unless you override it with the command-line
-option --daemon 0 or -d0.
+It is also possible to set a polling interval
+in your \fI~/.fetchmailrc\fR file by saying 'set\ daemon\ <interval>',
+where <interval> is an integer number of seconds. If you do this,
+fetchmail will always start in daemon mode unless you override it with
+the command-line option \-\-daemon 0 or \-d0.
.PP
Only one daemon process is permitted per user; in daemon mode,
-.I fetchmail
-makes a per-user lockfile to guarantee this.
+\fIfetchmail\fR sets up a per-user lockfile to guarantee this.
+(You can however cheat and set the FETCHMAILHOME environment variable to
+overcome this setting, but in that case, it is your responsibility to
+make sure you aren't polling the same server with two processes at the
+same time.)
+.SS Awakening the background daemon
.PP
Normally, calling fetchmail with a daemon in the background sends a
-wake-up signal to the daemon, forcing it to poll mailservers
-immediately. (The wake-up signal is SIGHUP if fetchmail is running as
-root, SIGUSR1 otherwise.) The wake-up action also clears any `wedged'
-flags indicating that connections have wedged due to failed
+wake-up signal to the daemon and quits without output. The background
+daemon then starts its next poll cycle immediately. The wake-up signal,
+SIGUSR1, can also be sent manually. The wake-up action also clears any
+'wedged' flags indicating that connections have wedged due to failed
authentication or multiple timeouts.
+.SS Terminating the background daemon
.PP
The option
-.B --quit
+.B \-\-quit
will kill a running daemon process instead of waking it up (if there
-is no such process,
-.I fetchmail
-notifies you). If the --quit option is the only command-line option,
-that's all there is to it.
-.PP
-The quit option may also be mixed with other command-line options; its
-effect is to kill any running daemon before doing what the other
-options specify in combination with the fetchmailrc file.
+is no such process, \fIfetchmail\fP will notify you.
+If the \-\-quit option appears last on the command line, \fIfetchmail\fP
+will kill the running daemon process and then quit. Otherwise,
+\fIfetchmail\fP will first kill a running daemon process and then
+continue running with the other options.
+.SS Useful options for daemon mode
.PP
The
.B \-L <filename>
or
.B \-\-logfile <filename>
-option (keyword: set logfile) allows you to redirect status messages
-emitted while detached into a specified logfile (follow the
-option with the logfile name). The logfile is opened for append, so
-previous messages aren't deleted. This is primarily useful for
-debugging configurations.
+option (keyword: set logfile) is only effective when fetchmail is
+detached. This option allows you to redirect status messages
+into a specified logfile (follow the option with the logfile name). The
+logfile is opened for append, so previous messages aren't deleted. This
+is primarily useful for debugging configurations. Note that fetchmail
+does not detect if the logfile is rotated, the logfile is only opened
+once when fetchmail starts. You need to restart fetchmail after rotating
+the logfile and before compressing it (if applicable).
.PP
The
.B \-\-syslog
file are still written to stderr, or to the specified log file.
The
.B \-\-nosyslog
-option turns off use of
+option turns off use of
.IR syslog (3),
-assuming it's turned on in the
-.I ~/.fetchmailrc
+assuming it's turned on in the
+.I ~/.fetchmailrc
file, or that the
.B \-L
or
.B \-\-logfile <file>
option was used.
.PP
-The
+The
.B \-N
-or --nodetach option suppresses backgrounding and detachment of the
+or
+.B \-\-nodetach
+option suppresses backgrounding and detachment of the
daemon process from its control terminal. This is useful
for debugging or when fetchmail runs as the child of a supervisor
process such as
next poll cycle. (The IMAP logic doesn't delete messages until
they're delivered, so this problem does not arise.)
.PP
-If you touch or change the
-.I ~/.fetchmailrc
-file while fetchmail is running in daemon mode, this will be detected
+If you touch or change the
+.I ~/.fetchmailrc
+file while fetchmail is running in daemon mode, this will be detected
at the beginning of the next poll cycle. When a changed
-.I ~/.fetchmailrc
+.I ~/.fetchmailrc
is detected, fetchmail rereads it and restarts from scratch (using
-exec(2); no state information is retained in the new instance). Note also
-that if you break the
-.I ~/.fetchmailrc
+exec(2); no state information is retained in the new instance).
+Note also that if you break the
+.I ~/.fetchmailrc
file's syntax, the new instance will softly and silently vanish away
on startup.
.SH ADMINISTRATIVE OPTIONS
.PP
-The
+The
.B \-\-postmaster <name>
option (keyword: set postmaster) specifies the last-resort username to
which multidrop mail is to be forwarded if no matching local recipient
-can be found. Normally this is just the user who invoked
+can be found. It is also used as destination of undeliverable mail if
+the 'bouncemail' global option is off and additionally for spam-blocked
+mail if the 'bouncemail' global option is off and the 'spambounce'
+global option is on. This option defaults to the user who invoked
.IR fetchmail .
If the invoking user is root, then the default of this option is
-the user `postmaster'. Setting postmaster to the empty string causes
-such mail to be discarded.
+the user 'postmaster'. Setting postmaster to the empty string causes
+such mail as described above to be discarded - this however is usually a
+bad idea.
+See also the description of the 'FETCHMAILUSER' environment variable in
+the ENVIRONMENT section below.
.PP
The
.B \-\-nobounce
-option suppresses the normal action of bouncing errors back to the
-sender in an RFC1894-conformant error message. If nobounce is on, the
-message will go to the postmaster instead.
+behaves like the "set no bouncemail" global option, which see.
.PP
-The
+The
.B \-\-invisible
option (keyword: set invisible) tries to make fetchmail invisible.
Normally, fetchmail behaves like any other MTA would -- it generates a
the MTA it forwards to into thinking it came directly from the
mailserver host.
.PP
-The
+The
.B \-\-showdots
option (keyword: set showdots) forces fetchmail to show progress dots
even if the current tty is not stdout (for example logfiles).
-Starting with fetchmail version 5.3.0,
-progress dots are only shown on stdout by default.
+Fetchmail shows the dots by default when run in nodetach mode or when
+daemon mode is not enabled.
.PP
By specifying the
.B \-\-tracepolls
example, occur if you have an account on the same server running a
mailing list, and are subscribed to the list using that account). The
default is not adding any such header. In
-.IR .fetchmailrc ,
-this is called `tracepolls'.
+.IR .fetchmailrc ,
+this is called 'tracepolls'.
.SH RETRIEVAL FAILURE MODES
The protocols \fIfetchmail\fR uses to talk to mailservers are next to
spam block.
.PP
When forwarding to an MDA, however, there is more possibility
-of error. Some MDAs are `safe' and reliably return a nonzero status
+of error. Some MDAs are 'safe' and reliably return a nonzero status
on any delivery error, even one due to temporary resource limits.
-The well-known
-.IR procmail (1)
+The
+.IR maildrop (1)
program is like this; so are most programs designed as mail transport
-agents, such as
+agents, such as
.IR sendmail (1),
-and
+including the sendmail wrapper of Postfix and
.IR exim (1).
These programs give back a reliable positive acknowledgement and
can be used with the mda option with no risk of mail loss. Unsafe
MDAs, though, may return 0 even on delivery failure. If this
happens, you will lose mail.
.PP
-The normal mode of \fIfetchmail\fR is to try to download only `new'
+The normal mode of \fIfetchmail\fR is to try to download only 'new'
messages, leaving untouched (and undeleted) messages you have already
read directly on the server (or fetched with a previous \fIfetchmail
---keep\fR). But you may find that messages you've already read on the
+\-\-keep\fR). But you may find that messages you've already read on the
server are being fetched (and deleted) even when you don't specify
---all. There are several reasons this can happen.
+\-\-all. There are several reasons this can happen.
.PP
One could be that you're using POP2. The POP2 protocol includes no
-representation of `new' or `old' state in messages, so \fIfetchmail\fR
+representation of 'new' or 'old' state in messages, so \fIfetchmail\fR
must treat all messages as new all the time. But POP2 is obsolete, so
this is unlikely.
.PP
in the middle of mailboxes (some VMS implementations of mail are
rumored to do this). The \fIfetchmail\fR code assumes that new
messages are appended to the end of the mailbox; when this is not true
-it may treat some old messages as new and vice versa. Using UIDL might
-fix this, otherwise, consider switching to IMAP.
+it may treat some old messages as new and vice versa. Using UIDL whilst
+setting fastuidl 0 might fix this, otherwise, consider switching to IMAP.
.PP
Yet another POP3 problem is that if they can't make tempfiles in the
user's home directory, some POP3 servers will hand back an
this, though it's not specified by the IMAP RFCs. If you ever trip over
a server that doesn't, the symptom will be that messages you have
already read on your host will look new to the server. In this
-(unlikely) case, only messages you fetched with \fIfetchmail --keep\fR
+(unlikely) case, only messages you fetched with \fIfetchmail \-\-keep\fR
will be both undeleted and marked old.
.PP
In ETRN and ODMR modes, \fIfetchmail\fR does not actually retrieve messages;
to the client via SMTP. Therefore it sends only undelivered messages.
.SH SPAM FILTERING
-Many SMTP listeners allow administrators to set up `spam filters' that
+Many SMTP listeners allow administrators to set up 'spam filters' that
block unsolicited email from specified domains. A MAIL FROM or DATA line that
triggers this feature will elicit an SMTP response which
(unfortunately) varies according to the listener.
.PP
-Newer versions of
+Newer versions of
.I sendmail
return an error code of 571.
.PP
may reject code with a 500 response (followed by an enhanced status
code that contains more information).
.PP
-Return codes which
+Return codes which
.I fetchmail
treats as antispam responses and discards
-the message can be set with the `antispam' option. This is one of the
+the message can be set with the 'antispam' option. This is one of the
.I only
three circumstance under which fetchmail ever discards mail (the others
are the 552 and 553 errors described below, and the suppression of
.I fetchmail
is fetching from an IMAP server, the antispam response will be detected and
the message rejected immediately after the headers have been fetched,
-without reading the message body. Thus, you won't pay for downloading
+without reading the message body. Thus, you won't pay for downloading
spam message bodies.
.PP
By default, the list of antispam responses is empty.
.PP
-If the \fIspambounce\fR option is on, mail that is spam-blocked
-triggers an RFC1892 bounce message informing the originator that we do
-not accept mail from it.
+If the \fIspambounce\fR global option is on, mail that is spam-blocked
+triggers an RFC1892/RFC1894 bounce message informing the originator that
+we do not accept mail from it. See also BUGS.
.SH SMTP/ESMTP ERROR HANDLING
Besides the spam-blocking described above, fetchmail takes special
Delete the message from the server. Don't even try to send
bounce-mail to the originator.
.PP
-Other errors trigger bounce mail back to the originator.
+Other errors trigger bounce mail back to the originator. See also BUGS.
.SH THE RUN CONTROL FILE
The preferred way to set up fetchmail is to write a
When there is a conflict between the command-line arguments and the
arguments in this file, the command-line arguments take precedence.
.PP
-To protect the security of your passwords,
+To protect the security of your passwords,
your \fI~/.fetchmailrc\fR may not normally have more than 0600 (u=rw,g=,o=) permissions;
.I fetchmail
will complain and exit otherwise (this check is suppressed when
---version is on).
+\-\-version is on).
.PP
-You may read the \fI.fetchmailrc\fR file as a list of commands to
-be executed when
+You may read the \fI.fetchmailrc\fR file as a list of commands to
+be executed when
.I fetchmail
is called with no arguments.
.SS Run Control Syntax
There are four kinds of tokens: grammar keywords, numbers
(i.e. decimal digit sequences), unquoted strings, and quoted strings.
A quoted string is bounded by double quotes and may contain
-whitespace (and quoted digits are treated as a string). An unquoted
-string is any whitespace-delimited token that is neither numeric, string
-quoted nor contains the special characters `,', `;', `:', or `='.
+whitespace (and quoted digits are treated as a string). Note that
+quoted strings will also contain line feed characters if they run across
+two or more lines, unless you use a backslash to join lines (see below).
+An unquoted string is any whitespace-delimited token that is neither
+numeric, string quoted nor contains the special characters ',', ';',
+\&':', or '='.
.PP
Any amount of whitespace separates tokens in server entries, but is
-otherwise ignored. You may use standard C-style escapes (\en, \et,
-\eb, octal, and hex) to embed non-printable characters or string
-delimiters in strings.
-.PP
-Each server entry consists of one of the keywords `poll' or `skip',
+otherwise ignored. You may use backslash escape sequences (\en for LF,
+\&\et for HT, \eb for BS, \er for CR, \e\fInnn\fP for decimal (where
+nnn cannot start with a 0), \e0\fIooo\fP for octal, and \ex\fIhh\fP for
+hex) to embed non-printable characters or string delimiters in strings.
+In quoted strings, a backslash at the very end of a line will cause the
+backslash itself and the line feed (LF or NL, new line) character to be
+ignored, so that you can wrap long strings. Without the backslash at the
+line end, the line feed character would become part of the string.
+.PP
+.B Warning:
+while these resemble C-style escape sequences, they are not the same.
+fetchmail only supports these eight styles. C supports more escape
+sequences that consist of backslash (\e) and a single character, but
+does not support decimal codes and does not require the leading 0 in
+octal notation. Example: fetchmail interprets \e233 the same as \exE9
+(Latin small letter e with acute), where C would interpret \e233 as
+octal 0233 = \ex9B (CSI, control sequence introducer).
+.PP
+Each server entry consists of one of the keywords 'poll' or 'skip',
followed by a server name, followed by server options, followed by any
number of user descriptions. Note: the most common cause of syntax
errors is mixing up user and server options.
.PP
-For backward compatibility, the word `server' is a synonym for `poll'.
+For backward compatibility, the word 'server' is a synonym for 'poll'.
.PP
-You can use the noise keywords `and', `with',
-\&`has', `wants', and `options' anywhere in an entry to make
+You can use the noise keywords 'and', 'with',
+\&'has', 'wants', and 'options' anywhere in an entry to make
it resemble English. They're ignored, but but can make entries much
easier to read at a glance. The punctuation characters ':', ';' and
\&',' are also ignored.
.PP
.SS Poll vs. Skip
-The `poll' verb tells fetchmail to query this host when it is run with
-no arguments. The `skip' verb tells
-.I fetchmail
+The 'poll' verb tells fetchmail to query this host when it is run with
+no arguments. The 'skip' verb tells
+.I fetchmail
not to poll this host unless it is explicitly named on the command
-line. (The `skip' verb allows you to experiment with test entries
+line. (The 'skip' verb allows you to experiment with test entries
safely, or easily disable entries for hosts that are temporarily down.)
.PP
.SS Keyword/Option Summary
Here are the legal options. Keyword suffixes enclosed in
-square brackets are optional. Those corresponding to command-line
-options are followed by `-' and the appropriate option letter.
-If option is only relevant to a single mode of operation, it is noted
-as `s' or `m' for singledrop- or multidrop-mode, respectively.
+square brackets are optional. Those corresponding to short command-line
+options are followed by '\-' and the appropriate option letter. If
+option is only relevant to a single mode of operation, it is noted as
+\&'s' or 'm' for singledrop- or multidrop-mode, respectively.
Here are the legal global options:
l l l lw34.
Keyword Opt Mode Function
_
-set daemon \& \& T{
-Set a background poll interval in seconds
+set daemon \-d \& T{
+Set a background poll interval in seconds.
T}
set postmaster \& \& T{
-Give the name of the last-resort mail recipient
+Give the name of the last-resort mail recipient (default: user running
+fetchmail, "postmaster" if run by the root user)
+T}
+set bouncemail \& \& T{
+Direct error mail to the sender (default)
T}
set no bouncemail \& \& T{
-Direct error mail to postmaster rather than sender
+Direct error mail to the local postmaster (as per the 'postmaster'
+global option above).
T}
set no spambounce \& \& T{
-Send spam bounces
+Do not bounce spam-blocked mail (default).
T}
-set logfile \& \& T{
-Name of a file to dump error and status messages to
+set spambounce \& \& T{
+Bounce blocked spam-blocked mail (as per the 'antispam' user option)
+back to the destination as indicated by the 'bouncemail' global option.
+Warning: Do not use this to bounce spam back to the sender - most spam
+is sent with false sender address and thus this option hurts innocent
+bystanders.
T}
-set idfile \& \& T{
-Name of the file to store UID lists in
+set logfile \-L \& T{
+Name of a file to append error and status messages to.
T}
-set syslog \& \& T{
+set idfile \-i \& T{
+Name of the file to store UID lists in.
+T}
+set syslog \& \& T{
Do error logging through syslog(3).
T}
set no syslog \& \& T{
-Turn off error logging through syslog(3).
+Turn off error logging through syslog(3). (default)
T}
set properties \& \& T{
-String value is ignored by fetchmail (may be used by extension scripts)
+String value that is ignored by fetchmail (may be used by extension
+scripts).
T}
.TE
via \& \& T{
Specify DNS name of mailserver, overriding poll name
T}
-proto[col] -p \& T{
+proto[col] \-p \& T{
Specify protocol (case insensitive):
POP2, POP3, IMAP, APOP, KPOP
T}
local[domains] \& m T{
Specify domain(s) to be regarded as local
T}
-port -P \& T{
-Specify TCP/IP service port
+port \& \& T{
+Specify TCP/IP service port (obsolete, use 'service' instead).
+T}
+service \-P \& T{
+Specify service name (a numeric value is also allowed and
+considered a TCP/IP port number).
T}
auth[enticate] \& \& T{
-Set authentication type (default `any')
+Set authentication type (default 'any')
T}
-timeout -t \& T{
+timeout \-t \& T{
Server inactivity timeout in seconds (default 300)
T}
-envelope -E m T{
+envelope \-E m T{
Specify envelope-address header name
T}
no envelope \& m T{
Disable looking for envelope address
T}
-qvirtual -Q m T{
+qvirtual \-Q m T{
Qmail virtual domain prefix to remove from user name
T}
aka \& m T{
Specify alternate DNS names of mailserver
T}
-interface -I \& T{
+interface \-I \& T{
specify IP interface(s) that must be up for server poll to take place
T}
-monitor -M \& T{
+monitor \-M \& T{
Specify IP address to monitor for activity
T}
plugin \& \& T{
no checkalias \& m T{
Do comparison by name for multidrop (default)
T}
-uidl -U \& T{
-Force POP3 to use client-side UIDLs
+uidl \-U \& T{
+Force POP3 to use client-side UIDLs (recommended)
T}
no uidl \& \& T{
Turn off POP3 use of client-side UIDLs (default)
tracepolls \& \& T{
Add poll tracing information to the Received header
T}
-netsec \& \& T{
-Pass in IPsec security option request.
-T}
principal \& \& T{
-Set Kerberos principal (only useful with imap and kerberos)
+Set Kerberos principal (only useful with IMAP and kerberos)
T}
esmtpname \& \& T{
Set name for RFC2554 authentication to the ESMTP server.
T}
-esmtppassword \& \& T{
+esmtppassword \& \& T{
Set password for RFC2554 authentication to the ESMTP server.
T}
.TE
l l l lw34.
Keyword Opt Mode Function
_
-user[name] -u \& T{
-Set remote user name
-(local user name if name followed by `here')
+user[name] \-u \& T{
+Set remote user name
+(local user name if name followed by 'here')
T}
is \& \& T{
Connect local and remote user names
sslproto \& \& T{
Force ssl protocol for connection
T}
-folder -r \& T{
+folder \-r \& T{
Specify remote folder to query
T}
-smtphost -S \& T{
+smtphost \-S \& T{
Specify smtp host(s) to forward to
T}
fetchdomains \& m T{
Specify domains for which mail should be fetched
T}
-smtpaddress -D \& T{
+smtpaddress \-D \& T{
Specify the domain to be put in RCPT TO lines
T}
smtpname \& \& T{
Specify the user and domain to be put in RCPT TO lines
T}
-antispam -Z \& T{
+antispam \-Z \& T{
Specify what SMTP returns are interpreted as spam-policy blocks
T}
-mda -m \& T{
+mda \-m \& T{
Specify MDA for local delivery
T}
-bsmtp -o \& T{
+bsmtp \-o \& T{
Specify BSMTP batch file to append to
T}
preconnect \& \& T{
postconnect \& \& T{
Command to be executed after each connection
T}
-keep -k \& T{
-Don't delete seen messages from server
+keep \-k \& T{
+Don't delete seen messages from server (for POP3, uidl is recommended)
+T}
+flush \-F \& T{
+Flush all seen messages before querying (DANGEROUS)
T}
-flush -F \& T{
-Flush all seen messages before querying
+limitflush \& \& T{
+Flush all oversized messages before querying
T}
-fetchall -a \& T{
+fetchall \-a \& T{
Fetch all messages whether seen or not
T}
rewrite \& \& T{
idle \& \& T{
Idle waiting for new messages after each poll (IMAP only)
T}
-no keep -K \& T{
+no keep \-K \& T{
Delete seen messages from server (default)
T}
no flush \& \& T{
Don't drop Status headers (default)
T}
no dropdelivered \& \& T{
-Don't drop Delivered-To headers (default)
+Don't drop Delivered\-To headers (default)
T}
no mimedecode \& \& T{
Don't convert quoted-printable to 8-bit in MIME messages (default)
no idle \& \& T{
Don't idle waiting for new messages after each poll (IMAP only)
T}
-limit -l \& T{
+limit \-l \& T{
Set message size limit
T}
-warnings -w \& T{
+warnings \-w \& T{
Set message size warning interval
T}
-batchlimit -b \& T{
+batchlimit \-b \& T{
Max # messages to forward in single connect
T}
-fetchlimit -B \& T{
+fetchlimit \-B \& T{
Max # messages to fetch in single connect
T}
fetchsizelimit \& \& T{
fastuidl \& \& T{
Use binary search for first unseen message (POP3 only)
T}
-expunge -e \& T{
+expunge \-e \& T{
Perform an expunge on every #th message (IMAP and POP3 only)
T}
properties \& \& T{
.PP
Remember that all user options must \fIfollow\fR all server options.
.PP
-In the .fetchmailrc file, the `envelope' string argument may be
+In the .fetchmailrc file, the 'envelope' string argument may be
preceded by a whitespace-separated number. This number, if specified,
-is the number of such headers to skip (that is, an argument of 1
+is the number of such headers to skip over (that is, an argument of 1
selects the second header of the given type). This is sometime useful
-for ignoring bogus Received headers created by an ISP's local delivery
-agent.
+for ignoring bogus envelope headers created by an ISP's local delivery
+agent or internal forwards (through mail inspection systems, for
+instance).
.SS Keywords Not Corresponding To Option Switches
.PP
-The `folder' and `smtphost' options (unlike their command-line
+The 'folder' and 'smtphost' options (unlike their command-line
equivalents) can take a space- or comma-separated list of names
following them.
.PP
All options correspond to the obvious command-line arguments, except
-the following: `via', `interval', `aka', `is', `to', `dns'/`no dns',
-`checkalias'/`no checkalias', `password', `preconnect', `postconnect',
-`localdomains', `stripcr'/`no stripcr', `forcecr'/`no forcecr',
-`pass8bits'/`no pass8bits' `dropstatus/no dropstatus',
-`dropdelivered/no dropdelivered', `mimedecode/no mimedecode', `idle/no
-idle', and `no envelope'.
-.PP
-The `via' option is for if you want to have more
+the following: 'via', 'interval', 'aka', 'is', 'to', 'dns'/'no dns',
+\&'checkalias'/'no checkalias', 'password', 'preconnect', 'postconnect',
+\&'localdomains', 'stripcr'/'no stripcr', 'forcecr'/'no forcecr',
+\&'pass8bits'/'no pass8bits' 'dropstatus/no dropstatus',
+\&'dropdelivered/no dropdelivered', 'mimedecode/no mimedecode', 'no idle',
+and 'no envelope'.
+.PP
+The 'via' option is for if you want to have more
than one configuration pointing at the same site. If it is present,
-the string argument will be taken as the actual DNS name of the
+the string argument will be taken as the actual DNS name of the
mailserver host to query.
This will override the argument of poll, which can then simply be a
distinct label for the configuration (e.g. what you would give on the
command line to explicitly query this host).
.PP
-The `interval' option (which takes a numeric argument) allows you to poll a
+The 'interval' option (which takes a numeric argument) allows you to poll a
server less frequently than the basic poll interval. If you say
-\&`interval N' the server this option is attached to will only be
-queried every N poll intervals.
+\&'interval N' the server this option is attached to will only be
+queried every N poll intervals.
+.SS Singledrop vs. Multidrop options
.PP
-The `is' or `to' keywords associate the following local (client)
+The 'is' or 'to' keywords associate the following local (client)
name(s) (or server-name to client-name mappings separated by =) with
-the mailserver user name in the entry. If an is/to list has `*' as
-its last name, unrecognized names are simply passed through.
+the mailserver user name in the entry. If an is/to list has '*' as
+its last name, unrecognized names are simply passed through. Note that
+until \fIfetchmail\fR version 6.3.4 inclusively, these lists could only
+contain local parts of user names (fetchmail would only look at the part
+before the @ sign). \fIfetchmail\fR versions 6.3.5 and
+newer support full addresses on the left hand side of these mappings,
+and they take precedence over any 'localdomains', 'aka', 'via' or
+similar mappings.
.PP
A single local name can be used to support redirecting your mail when
your username on the client machine is different from your name on the
mailserver. When there is only a single local name, mail is forwarded
to that local username regardless of the message's Received, To, Cc,
-and Bcc headers. In this case
+and Bcc headers. In this case,
.I fetchmail
never does DNS lookups.
.PP
-When there is more than one local name (or name mapping) the
-\fIfetchmail\fR code does look at the Received, To, Cc, and Bcc
-headers of retrieved mail (this is `multidrop mode'). It looks for
-addresses with hostname parts that match your poll name or your `via',
-`aka' or `localdomains' options, and usually also for hostname parts
-which DNS tells it are aliases of the mailserver. See the discussion
-of `dns', `checkalias', `localdomains', and `aka' for details on how
-matching addresses are handled.
+When there is more than one local name (or name mapping),
+\fIfetchmail\fR looks at the envelope header, if configured, and
+otherwise at the Received, To, Cc, and Bcc headers of retrieved mail
+(this is 'multidrop mode'). It looks for addresses with hostname parts
+that match your poll name or your 'via', 'aka' or 'localdomains'
+options, and usually also for hostname parts which DNS tells it are
+aliases of the mailserver. See the discussion of 'dns', 'checkalias',
+\&'localdomains', and 'aka' for details on how matching addresses are
+handled.
.PP
If \fIfetchmail\fR cannot match any mailserver usernames or
localdomain addresses, the mail will be bounced.
-Normally it will be bounced to the sender, but if `nobounce' is on
-it will go to the postmaster (which in turn defaults to being the
-calling user).
+Normally it will be bounced to the sender, but if the 'bouncemail'
+global option is off, the mail will go to the local postmaster instead.
+(see the 'postmaster' global option). See also BUGS.
.PP
-The `dns' option (normally on) controls the way addresses from
+The 'dns' option (normally on) controls the way addresses from
multidrop mailboxes are checked. On, it enables logic to check each
-host address that doesn't match an `aka' or `localdomains' declaration
+host address that does not match an 'aka' or 'localdomains' declaration
by looking it up with DNS. When a mailserver username is recognized
attached to a matching hostname part, its local mapping is added to
the list of local recipients.
.PP
-The `checkalias' option (normally off) extends the lookups performed
-by the `dns' keyword in multidrop mode, providing a way to cope with
+The 'checkalias' option (normally off) extends the lookups performed
+by the 'dns' keyword in multidrop mode, providing a way to cope with
remote MTAs that identify themselves using their canonical name, while
they're polled using an alias.
When such a server is polled, checks to extract the envelope address
fail, and
-.IR fetchmail
-reverts to delivery using the To/Cc/Bcc headers (See below
-`Header vs. Envelope addresses').
+.IR fetchmail
+reverts to delivery using the To/Cc/Bcc headers (See below
+\&'Header vs. Envelope addresses').
Specifying this option instructs
-.IR fetchmail
+.IR fetchmail
to retrieve all the IP addresses associated with both the poll name
and the name used by the remote MTA and to do a comparison of the IP
addresses. This comes in handy in situations where the remote server
undergoes frequent canonical name changes, that would otherwise
-require modifications to the rcfile. `checkalias' has no effect if
-`no dns' is specified in the rcfile.
+require modifications to the rcfile. 'checkalias' has no effect if
+\&'no dns' is specified in the rcfile.
.PP
-The `aka' option is for use with multidrop mailboxes. It allows you
+The 'aka' option is for use with multidrop mailboxes. It allows you
to pre-declare a list of DNS aliases for a server. This is an
optimization hack that allows you to trade space for speed. When
.IR fetchmail ,
while processing a multidrop mailbox, grovels through message headers
looking for names of the mailserver, pre-declaring common ones can
save it from having to do DNS lookups. Note: the names you give
-as arguments to `aka' are matched as suffixes -- if you specify
-(say) `aka netaxs.com', this will match not just a hostname
-netaxs.com, but any hostname that ends with `.netaxs.com'; such as
+as arguments to 'aka' are matched as suffixes -- if you specify
+(say) 'aka netaxs.com', this will match not just a hostname
+netaxs.com, but any hostname that ends with '.netaxs.com'; such as
(say) pop3.netaxs.com and mail.netaxs.com.
.PP
-The `localdomains' option allows you to declare a list of domains
+The 'localdomains' option allows you to declare a list of domains
which fetchmail should consider local. When fetchmail is parsing
address lines in multidrop modes, and a trailing segment of a host
name matches a declared local domain, that address is passed through
to the listener or MDA unaltered (local-name mappings are \fInot\fR
applied).
.PP
-If you are using `localdomains', you may also need to specify \&`no
+If you are using 'localdomains', you may also need to specify 'no
envelope', which disables \fIfetchmail\fR's normal attempt to deduce
an envelope address from the Received line or X-Envelope-To header or
-whatever header has been previously set by `envelope'. If you set `no
+whatever header has been previously set by 'envelope'. If you set 'no
envelope' in the defaults entry it is possible to undo that in
-individual entries by using `envelope <string>'. As a special case,
-\&`envelope "Received"' restores the default parsing of
+individual entries by using 'envelope <string>'. As a special case,
+\&'envelope "Received"' restores the default parsing of
Received lines.
.PP
The \fBpassword\fR option requires a string argument, which is the password
to be used with the entry's server.
.PP
-The `preconnect' keyword allows you to specify a shell command to be
+The 'preconnect' keyword allows you to specify a shell command to be
executed just before each time
.I fetchmail
-establishes a mailserver connection. This may be useful if you are
+establishes a mailserver connection. This may be useful if you are
attempting to set up secure POP connections with the aid of
.IR ssh (1).
If the command returns a nonzero status, the poll of that mailserver
will be aborted.
.PP
-Similarly, the `postconnect' keyword similarly allows you to specify a
+Similarly, the 'postconnect' keyword similarly allows you to specify a
shell command to be executed just after each time a mailserver
connection is taken down.
.PP
-The `forcecr' option controls whether lines terminated by LF only are
+The 'forcecr' option controls whether lines terminated by LF only are
given CRLF termination before forwarding. Strictly speaking RFC821
requires this, but few MTAs enforce the requirement it so this option
is normally off (only one such MTA, qmail, is in significant use at
-time of writing).
+time of writing).
.PP
-The `stripcr' option controls whether carriage returns are stripped
+The 'stripcr' option controls whether carriage returns are stripped
out of retrieved mail before it is forwarded. It is normally not
-necessary to set this, because it defaults to `on' (CR stripping
-enabled) when there is an MDA declared but `off' (CR stripping
-disabled) when forwarding is via SMTP. If `stripcr' and `forcecr' are
-both on, `stripcr' will override.
+necessary to set this, because it defaults to 'on' (CR stripping
+enabled) when there is an MDA declared but 'off' (CR stripping
+disabled) when forwarding is via SMTP. If 'stripcr' and 'forcecr' are
+both on, 'stripcr' will override.
.PP
-The `pass8bits' option exists to cope with Microsoft mail programs that
+The 'pass8bits' option exists to cope with Microsoft mail programs that
stupidly slap a "Content-Transfer-Encoding: 7bit" on everything. With
-this option off (the default) and such a header present,
+this option off (the default) and such a header present,
.I fetchmail
declares BODY=7BIT to an ESMTP-capable listener; this causes problems for
messages actually using 8-bit ISO or KOI-8 character sets, which will
be garbled by having the high bits of all characters stripped. If
-\&`pass8bits' is on,
+\&'pass8bits' is on,
.I fetchmail
is forced to declare BODY=8BITMIME to any ESMTP-capable listener. If
the listener is 8-bit-clean (as all the major ones now are) the right
thing will probably result.
.PP
-The `dropstatus' option controls whether nonempty Status and
+The 'dropstatus' option controls whether nonempty Status and
X-Mozilla-Status lines are retained in fetched mail (the default) or
discarded. Retaining them allows your MUA to see what messages (if
any) were marked seen on the server. On the other hand, it can
Status line in it has been seen. (Note: the empty Status lines
inserted by some buggy POP servers are unconditionally discarded.)
.PP
-The `dropdelivered' option controls whether Delivered-To headers will
-be kept in fetched mail (the default) or discarded. These headers are
+The 'dropdelivered' option controls whether Delivered\-To headers will
+be kept in fetched mail (the default) or discarded. These headers are
added by Qmail and Postfix mailservers in order to avoid mail loops but
may get in your way if you try to "mirror" a mailserver within the same
domain. Use with caution.
.PP
-The `mimedecode' option controls whether MIME messages using the
+The 'mimedecode' option controls whether MIME messages using the
quoted-printable encoding are automatically converted into pure 8-bit
data. If you are delivering mail to an ESMTP-capable, 8-bit-clean
listener (that includes all of the major MTAs like sendmail), then
character-set information and can lead to bad results if the encoding
of the headers differs from the body encoding.
.PP
-The `idle' option is intended to be used with IMAP servers supporting
+The 'idle' option is intended to be used with IMAP servers supporting
the RFC2177 IDLE command extension, but does not strictly require it.
If it is enabled, and fetchmail detects that IDLE is supported, an
IDLE will be issued at the end of each poll. This will tell the IMAP
can save bandwidth by eliminating TCP/IP connects and LOGIN/LOGOUT
sequences. On the other hand, an IDLE connection will eat almost all
of your fetchmail's time, because it will never drop the connection
-and allow other pools to occur unless the server times out the IDLE.
+and allow other polls to occur unless the server times out the IDLE.
It also doesn't work with multiple folders; only the first folder will
ever be polled.
.PP
-The `properties' option is an extension mechanism. It takes a string
+The 'properties' option is an extension mechanism. It takes a string
argument, which is ignored by fetchmail itself. The string argument may be
used to store configuration information for scripts which require it.
-In particular, the output of `--configdump' option will make properties
+In particular, the output of '\-\-configdump' option will make properties
associated with a user entry readily available to a Python script.
.PP
.SS Miscellaneous Run Control Options
-The words `here' and `there' have useful English-like
-significance. Normally `user eric is esr' would mean that
-mail for the remote user `eric' is to be delivered to `esr',
-but you can make this clearer by saying `user eric there is esr here',
-or reverse it by saying `user esr here is eric there'
+The words 'here' and 'there' have useful English-like
+significance. Normally 'user eric is esr' would mean that
+mail for the remote user 'eric' is to be delivered to 'esr',
+but you can make this clearer by saying 'user eric there is esr here',
+or reverse it by saying 'user esr here is eric there'
.PP
-Legal protocol identifiers for use with the `protocol' keyword are:
+Legal protocol identifiers for use with the 'protocol' keyword are:
.sp
.nf
- auto (or AUTO)
- pop2 (or POP2)
+ auto (or AUTO) (legacy, to be removed from future release)
+ pop2 (or POP2) (legacy, to be removed from future release)
pop3 (or POP3)
sdps (or SDPS)
imap (or IMAP)
.fi
.sp
.PP
-Legal authentication types are `any', `password', `kerberos', 'kerberos_v5'
-and `gssapi', `cram-md5', `otp', `ntlm', `ssh`.
-The `password' type specifies authentication by normal transmission of a
-password (the password may be plain text or subject to
-protocol-specific encryption as in APOP); `kerberos' tells
-\fIfetchmail\fR to try to get a Kerberos ticket at the start of each
-query instead, and send an arbitrary string as the password; and
-`gssapi' tells fetchmail to use GSSAPI authentication. See the description
-of the `auth' keyword for more.
-.PP
-Specifying `kpop' sets POP3 protocol over port 1109 with Kerberos V4
+Legal authentication types are 'any', 'password', 'kerberos',
+\&'kerberos_v4', 'kerberos_v5' and 'gssapi', 'cram\-md5', 'otp', 'msn'
+(only for POP3), 'ntlm', 'ssh', 'external' (only IMAP).
+The 'password' type specifies
+authentication by normal transmission of a password (the password may be
+plain text or subject to protocol-specific encryption as in APOP);
+\&'kerberos' tells \fIfetchmail\fR to try to get a Kerberos ticket at the
+start of each query instead, and send an arbitrary string as the
+password; and 'gssapi' tells fetchmail to use GSSAPI authentication.
+See the description of the 'auth' keyword for more.
+.PP
+Specifying 'kpop' sets POP3 protocol over port 1109 with Kerberos V4
authentication. These defaults may be overridden by later options.
.PP
-There are currently four global option statements; `set logfile'
-followed by a string sets the same global specified by --logfile. A
-command-line --logfile option will override this. Also, `set daemon'
-sets the poll interval as --daemon does. This can be overridden by a
-command-line --daemon option; in particular --daemon 0 can be used to
-force foreground operation. The `set postmaster' statement sets the
-address to which multidrop mail defaults if there are no local
-matches. Finally, `set syslog' sends log messages to syslogd(8).
+There are some global option statements: 'set logfile'
+followed by a string sets the same global specified by \-\-logfile. A
+command-line \-\-logfile option will override this. Note that \-\-logfile is
+only effective if fetchmail detaches itself from the terminal. Also,
+\&'set daemon' sets the poll interval as \-\-daemon does. This can be
+overridden by a command-line \-\-daemon option; in particular \-\-daemon\~0
+can be used to force foreground operation. The 'set postmaster'
+statement sets the address to which multidrop mail defaults if there are
+no local matches. Finally, 'set syslog' sends log messages to
+syslogd(8).
+
+.SH DEBUGGING FETCHMAIL
+.SS Fetchmail crashing
+There are various ways in that fetchmail may "crash", i. e. stop
+operation suddenly and unexpectedly. A "crash" usually refers to an
+error condition that the software did not handle by itself. A well-known
+failure mode is the "segmentation fault" or "signal 11" or "SIGSEGV" or
+just "segfault" for short. These can be caused by hardware or by software
+problems. Software-induced segfaults can usually be reproduced easily
+and in the same place, whereas hardware-induced segfaults can go away if
+the computer is rebooted, or powered off for a few hours, and can happen
+in random locations even if you use the software the same way.
+
+For solving hardware-induced segfaults, find the faulty component and repair or
+replace it. <http://www.bitwizard.nl/sig11/> may help you with details.
+
+For solving software-induced segfaults, the developers may need a "stack
+backtrace".
+
+.SS Enabling fetchmail core dumps
+By default, fetchmail suppresses core dumps as these might contain
+passwords and other sensitive information. For debugging fetchmail
+crashes, obtaining a "stack backtrace" from a core dump is often the
+quickest way to solve the problem, and when posting your problem on a
+mailing list, the developers may ask you for a "backtrace".
+
+1. To get useful backtraces, fetchmail needs to be installed without
+getting stripped of its compilation symbols. Unfortunately, most
+binary packages that are installed are stripped, and core files from
+symbol-stripped programs are worthless. So you may need to recompile
+fetchmail. On many systems, you can type
+.sp
+.nf
+ file `which fetchmail`
+.fi
+.sp
+to find out if fetchmail was symbol-stripped or not. If yours was
+unstripped, fine, proceed, if it was stripped, you need to recompile the
+source code first. You do not usually need to install fetchmail in order
+to debug it.
+
+2. The shell environment that starts fetchmail needs to enable core
+dumps. The key is the "maximum core (file) size" that can usually be
+configured with a tool named "limit" or "ulimit". See the documentation
+for your shell for details. In the popular bash shell, "ulimit \-Sc
+unlimited" will allow the core dump.
+
+3. You need to tell fetchmail, too, to allow core dumps. To do
+this, run fetchmail with the \fB\-d0 \-v\fP options. It is often easier
+to also add \fB\-\-nosyslog \-N\fR as well.
+
+Finally, you need to reproduce the crash. You can just start fetchmail
+from the directory where you compiled it by typing \fB./fetchmail\fR,
+so the complete command line will start with \fB./fetchmail \-Nvd0
+\&\-\-nosyslog\fR and perhaps list your other options.
+
+After the crash, run your debugger to obtain the core dump. The
+debugger will often be GNU GDB, you can then type (adjust paths as
+necessary) \fBgdb ./fetchmail fetchmail.core\fR and then, after GDB
+has started up and read all its files, type \fBbacktrace full\fR, save
+the output (copy & paste will do, the backtrace will be read by a human)
+and then type \fBquit\fR to leave gdb.
+.B Note:
+on some systems, the core
+files have different names, they might contain a number instead of the
+program name, or number and name, but it will usually have "core" as
+part of their name.
.SH INTERACTION WITH RFC 822
When trying to determine the originating address of a message,
-fetchmail looks through headers in the following order:
+fetchmail looks through headers in the following order:
.sp
.nf
Return-Path:
In multidrop mode, destination headers are processed as follows:
First, fetchmail looks for the Received: header (or whichever one is
-specified by the `envelope' option) to determine the local
+specified by the 'envelope' option) to determine the local
recipient address. If the mail is addressed to more than one recipient,
the Received line won't contain any information regarding recipient addresses.
Then fetchmail looks for the Resent-To:, Resent-Cc:, and Resent-Bcc:
lines. If they exist, they should contain the final recipients and
-have precedence over their To:/Cc:/Bcc: counterparts. If the Resent-*
+have precedence over their To:/Cc:/Bcc: counterparts. If the Resent\-*
lines don't exist, the To:, Cc:, Bcc: and Apparently-To: lines are
-looked for. (The presence of a Resent-To: is taken to imply that the
+looked for. (The presence of a Resent\-To: is taken to imply that the
person referred by the To: address has already received the original
copy of the mail.)
Basic format is:
.nf
- poll SERVERNAME protocol PROTOCOL username NAME password PASSWORD
+ poll SERVERNAME protocol PROTOCOL username NAME password PASSWORD
.fi
.PP
Example:
poll other.provider.net proto pop2 user "John.Smith" pass "My^Hat"
.fi
-Here's a version of those two with more whitespace and some noise words:
+Here's a version of those two with more whitespace and some noise words:
.nf
poll pop.provider.net proto pop3
.fi
You may have an initial server description headed by the keyword
-`defaults' instead of `poll' followed by a name. Such a record
+\&'defaults' instead of 'poll' followed by a name. Such a record
is interpreted as defaults for all queries to use. It may be overwritten
by individual server descriptions. So, you could write:
It's possible to specify more than one user per server (this is only
likely to be useful when running fetchmail in daemon mode as root).
-The `user' keyword leads off a user description, and every user specification
+The 'user' keyword leads off a user description, and every user specification
in a multi-user entry must include it. Here's an example:
.nf
user jones with pass "secret2" is "jjones" here keep
.fi
-This associates the local username `smith' with the pop.provider.net
-username `jsmith' and the local username `jjones' with the
-pop.provider.net username `jones'. Mail for `jones' is kept on the
+This associates the local username 'smith' with the pop.provider.net
+username 'jsmith' and the local username 'jjones' with the
+pop.provider.net username 'jones'. Mail for 'jones' is kept on the
server after download.
.PP
-Here's what a simple retrieval configuration for a multi-drop mailbox
+Here's what a simple retrieval configuration for a multidrop mailbox
looks like:
.nf
user maildrop with pass secret1 to golux 'hurkle'='happy' snark here
.fi
-This says that the mailbox of account `maildrop' on the server is a
-multi-drop box, and that messages in it should be parsed for the
-server user names `golux', `hurkle', and `snark'. It further
-specifies that `golux' and `snark' have the same name on the
-client as on the server, but mail for server user `hurkle' should be
-delivered to client user `happy'.
+This says that the mailbox of account 'maildrop' on the server is a
+multidrop box, and that messages in it should be parsed for the
+server user names 'golux', 'hurkle', and 'snark'. It further
+specifies that 'golux' and 'snark' have the same name on the
+client as on the server, but mail for server user 'hurkle' should be
+delivered to client user 'happy'.
+
+.B Note
+that
+.I fetchmail,
+until version 6.3.4, did NOT allow full user@domain specifications here,
+these would never match. \fIFetchmail\fP 6.3.5 and newer support
+user@domain specifications on the left-hand side of a user mapping.
.PP
Here's an example of another kind of multidrop connection:
user maildrop with pass secret1 to * here
.fi
-This also says that the mailbox of account `maildrop' on the server is
-a multi-drop box. It tells fetchmail that any address in the
+This also says that the mailbox of account 'maildrop' on the server is
+a multidrop box. It tells fetchmail that any address in the
loonytoons.org or toons.org domains (including sub-domain addresses like
-`joe@daffy.loonytoons.org') should be passed through to the local SMTP
+\&'joe@daffy.loonytoons.org') should be passed through to the local SMTP
listener without modification. Be careful of mail loops if you do this!
.PP
Here's an example configuration using ssh and the plugin option. The
runs of messages may be generated when copies of a message addressed
to multiple users are delivered to a multidrop box.
-.SS Header vs. Envelope addresses
+.SS Header vs. Envelope addresses
The fundamental problem is that by having your mailserver toss several
peoples' mail in a single maildrop box, you may have thrown away
potentially vital information about who each piece of mail was
-actually addressed to (the `envelope address', as opposed to the
-header addresses in the RFC822 To/Cc/Bcc headers). This `envelope
-address' is the address you need in order to reroute mail properly.
+actually addressed to (the 'envelope address', as opposed to the
+header addresses in the RFC822 To/Cc headers - the Bcc is not available
+at the receiving end). This 'envelope address' is the address you need
+in order to reroute mail properly.
.PP
-Sometimes
+Sometimes
.I fetchmail
can deduce the envelope address. If the mailserver MTA is
.I sendmail
and the item of mail had just one recipient, the MTA will have written
-a `by/for' clause that gives the envelope addressee into its Received
+a 'by/for' clause that gives the envelope addressee into its Received
header. But this doesn't work reliably for other MTAs, nor if there is
more than one recipient. By default, \fIfetchmail\fR looks for
envelope addresses in these lines; you can restore this default with
--E "Received" or \&`envelope Received'.
+\&\-E "Received" or 'envelope Received'.
.PP
-Alternatively, some SMTP listeners and/or mail servers insert a header
+.B As a better alternative,
+some SMTP listeners and/or mail servers insert a header
in each message containing a copy of the envelope addresses. This
-header (when it exists) is often `X-Envelope-To'. Fetchmail's
-assumption about this can be changed with the -E or `envelope' option.
-Note that writing an envelope header of this kind exposes the names of
-recipients (including blind-copy recipients) to all receivers of the
-messages; it is therefore regarded by some administrators as a
-security/privacy problem.
-.PP
-A slight variation of the `X-Envelope-To' header is the `Delivered-To' put
-by qmail to avoid mail loops. It will probably prefix the user name with a
-string that normally matches the user's domain. To remove this prefix you
-can use the -Q or `qvirtual' option.
-.PP
-Sometimes, unfortunately, neither of these methods works. When they
-all fail, fetchmail must fall back on the contents of To/Cc/Bcc
-headers to try to determine recipient addressees -- and these are not
-reliable. In particular, mailing-list software often ships mail with
-only the list broadcast address in the To header.
+header (when it exists) is often 'X\-Original\-To', 'Delivered\-To' or
+\&'X\-Envelope\-To'. Fetchmail's assumption about this can be changed with
+the \-E or 'envelope' option. Note that writing an envelope header of
+this kind exposes the names of recipients (including blind-copy
+recipients) to all receivers of the messages, so the upstream must store
+one copy of the message per recipient to avoid becoming a privacy problem.
+.PP
+Postfix, since version 2.0, writes an X\-Original\-To: header which
+contains a copy of the envelope as it was received.
+.PP
+Qmail and Postfix generally write a 'Delivered\-To' header upon
+delivering the message to the mail spool and use it to avoid mail loops.
+Qmail virtual domains however will prefix the user name with a string
+that normally matches the user's domain. To remove this prefix you can
+use the \-Q or 'qvirtual' option.
+.PP
+Sometimes, unfortunately, neither of these methods works. That is the
+point when you should contact your ISP and ask them to provide such an
+envelope header, and you should not use multidrop in this situation.
+When they all fail, fetchmail must fall back on the contents of To/Cc
+headers (Bcc headers are not available - see below) to try to determine
+recipient addressees -- and these are unreliable.
+In particular, mailing-list software often ships mail with only
+the list broadcast address in the To header.
+.PP
+.B Note that a future version of \fIfetchmail\fP may remove To/Cc parsing!
.PP
When
.I fetchmail
cannot deduce a recipient address that is local, and the intended
recipient address was anyone other than fetchmail's invoking user,
-mail will get lost. This is what makes the multidrop feature risky.
+.B mail will get lost.
+This is what makes the multidrop feature risky without proper envelope
+information.
.PP
A related problem is that when you blind-copy a mail message, the Bcc
-information is carried \fIonly\fR as envelope address (it's not put
-in the headers fetchmail can see unless there is an X-Envelope
-header). Thus, blind-copying to someone who gets mail over a
-fetchmail link will fail unless the the mailserver host routinely
-writes X-Envelope or an equivalent header into messages in your maildrop.
+information is carried \fIonly\fR as envelope address (it's removed from
+the headers by the sending mail server, so fetchmail can see it only if
+there is an X-\Envelope\-To header). Thus, blind-copying to someone who
+gets mail over a fetchmail multidrop link will fail unless the the
+mailserver host routinely writes X\-Envelope\-To or an equivalent header
+into messages in your maildrop.
+.PP
+\fBIn conclusion, mailing lists and Bcc'd mail can only work if the
+server you're fetching from (1) stores one copy of the message per
+recipient in \fIyour\fP domain and (2) records the envelope
+information in a special header (X\-Original\-To, Delivered\-To,
+X\-Envelope\-To).\fR
.SS Good Ways To Use Multidrop Mailboxes
Multiple local names can be used to administer a mailing list from the
client side of a \fIfetchmail\fR collection. Suppose your name is
-\&`esr', and you want to both pick up your own mail and maintain a mailing
+\&'esr', and you want to both pick up your own mail and maintain a mailing
list called (say) "fetchmail-friends", and you want to keep the alias
list on your client machine.
.PP
-On your server, you can alias \&`fetchmail-friends' to `esr'; then, in
-your \fI.fetchmailrc\fR, declare \&`to esr fetchmail-friends here'.
-Then, when mail including `fetchmail-friends' as a local address
+On your server, you can alias 'fetchmail\-friends' to 'esr'; then, in
+your \fI.fetchmailrc\fR, declare 'to esr fetchmail\-friends here'.
+Then, when mail including 'fetchmail\-friends' as a local address
gets fetched, the list name will be appended to the list of
recipients your SMTP listener sees. Therefore it will undergo alias
-expansion locally. Be sure to include `esr' in the local alias
-expansion of fetchmail-friends, or you'll never see mail sent only to
+expansion locally. Be sure to include 'esr' in the local alias
+expansion of fetchmail\-friends, or you'll never see mail sent only to
the list. Also be sure that your listener has the "me-too" option set
-(sendmail's -oXm command-line option or OXm declaration) so your name
+(sendmail's \-oXm command-line option or OXm declaration) so your name
isn't removed from alias expansions in messages you send.
.PP
This trick is not without its problems, however. You'll begin to see
this when a message comes in that is addressed only to a mailing list
you do \fInot\fR have declared as a local name. Each such message
-will feature an `X-Fetchmail-Warning' header which is generated
+will feature an 'X\-Fetchmail\-Warning' header which is generated
because fetchmail cannot find a valid local name in the recipient
addresses. Such messages default (as was described above) to being
sent to the local user running
but the program has no way to know that that's actually the right thing.
.SS Bad Ways To Abuse Multidrop Mailboxes
-Multidrop mailboxes and
+Multidrop mailboxes and
.I fetchmail
serving multiple users in daemon mode do not mix. The problem, again, is
mail from mailing lists, which typically does not have an individual
-recipient address on it. Unless
+recipient address on it. Unless
.I fetchmail
can deduce an envelope address, such mail will only go to the account
running fetchmail (probably root). Also, blind-copied users are very
likely never to see their mail at all.
.PP
-If you're tempted to use
-.I fetchmail
+If you're tempted to use
+.I fetchmail
to retrieve mail for multiple users from a single mail drop via POP or
IMAP, think again (and reread the section on header and envelope
addresses above). It would be smarter to just let the mail sit in the
to haunt you.
.SS Speeding Up Multidrop Checking
-Normally, when multiple users are declared
+Normally, when multiple users are declared
.I fetchmail
extracts recipient addresses as described above and checks each host
part with DNS to see if it's an alias of the mailserver. If so, the
-name mappings described in the to ... here declaration are done and
+name mappings described in the "to ... here" declaration are done and
the mail locally delivered.
.PP
-This is the safest but also slowest method. To speed it up,
-pre-declare mailserver aliases with `aka'; these are checked before
-DNS lookups are done. If you're certain your aka list contains
+This is a convenient but also slow method. To speed
+it up, pre-declare mailserver aliases with 'aka'; these are checked
+before DNS lookups are done. If you're certain your aka list contains
.B all
-DNS aliases of the mailserver (and all MX names pointing at it)
-you can declare `no dns' to suppress DNS lookups entirely and
+DNS aliases of the mailserver (and all MX names pointing at it - note
+this may change in a future version)
+you can declare 'no dns' to suppress DNS lookups entirely and
\fIonly\fR match against the aka list.
.SH EXIT CODES
-To facilitate the use of
+To facilitate the use of
.I fetchmail
-in shell scripts, an exit code is returned to give an indication
+in shell scripts, an exit\ status code is returned to give an indication
of what occurred during a given connection.
.PP
-The exit codes returned by
+The exit codes returned by
.I fetchmail
are as follows:
.IP 0
-One or more messages were successfully retrieved (or, if the -c option
+One or more messages were successfully retrieved (or, if the \-c option
was selected, were found waiting but not retrieved).
.IP 1
There was no mail awaiting retrieval. (There may have been old mail still
just treat this as an 'unrecoverable error'. This error can also be
because a protocol fetchmail wants to use is not listed in /etc/services.
.IP 3
-The user authentication step failed. This usually means that a bad
-user-id, password, or APOP id was specified. Or it may mean that you
+The user authentication step failed. This usually means that a bad
+user-id, password, or APOP id was specified. Or it may mean that you
tried to run fetchmail under circumstances where it did not have
standard input attached to a terminal and could not prompt for a
missing password.
.IP 4
Some sort of fatal protocol error was detected.
.IP 5
-There was a syntax error in the arguments to
+There was a syntax error in the arguments to
.IR fetchmail .
.IP 6
The run control file had bad permissions.
.I fetchmail
timed out while waiting for the server.
.IP 8
-Client-side exclusion error. This means
+Client-side exclusion error. This means
.I fetchmail
either found another copy of itself already running, or failed in such
a way that it isn't sure whether another copy is running.
talking to qpopper or other servers that can respond with "lock busy"
or some similar text containing the word "lock".
.IP 10
-The
+The
.I fetchmail
run failed while trying to do an SMTP port open or transaction.
.IP 11
.IP 12
BSMTP batch file could not be opened.
.IP 13
-Poll terminated by a fetch limit (see the --fetchlimit option).
+Poll terminated by a fetch limit (see the \-\-fetchlimit option).
.IP 14
Server busy indication.
-.IP 15
-Server timed out during an IMAP IDLE.
.IP 23
Internal error. You should see a message on standard error with
details.
+.IP 24 - 26, 28, 29
+These are internal codes and should not appear externally.
.PP
When
.I fetchmail
~/.fetchmail.pid
lock file to help prevent concurrent runs (non-root mode).
.TP 5
-~/.netrc
+~/.netrc
your FTP run control file, which (if present) will be searched for
passwords as a last resort before prompting for one interactively.
.TP 5
multiple names per userid gracefully).
If the environment variable FETCHMAILHOME is set to a valid and
-existing directory name, the .fetchmailrc and .fetchids and
-\&.fetchmail.pid files are put there instead of in the invoking user's
-home directory (and lose the leading dots on their names). The
-\&.netrc file is looked for in the the invoking user's home directory
-regardless of FETCHMAILHOME's setting.
+existing directory name, fetchmail will read $FETCHMAILHOME/fetchmailrc
+(the dot is missing in this case), $FETCHMAILHOME/.fetchids and
+$FETCHMAILHOME/.fetchmail.pid rather than from the user's home
+directory. The .netrc file is always looked for in the the invoking
+user's home directory regardless of FETCHMAILHOME's setting.
+
+If the HOME_ETC variable is set, fetchmail will read
+$HOME_ETC/.fetchmailrc instead of ~/.fetchmailrc.
-If the HOME_ETC variable is set, file $HOME_ETC/.fetchmailrc is used
-instead of ~/.fetchmailrc.
+If HOME_ETC and FETCHMAILHOME are set, HOME_ETC will be ignored.
.SH SIGNALS
If a
.I fetchmail
-daemon is running as root, SIGHUP wakes it up from its sleep phase and
-forces a poll of all non-skipped servers (this is in accordance with
-the usual conventions for system daemons).
+daemon is running as root, SIGUSR1 wakes it up from its sleep phase and
+forces a poll of all non-skipped servers. For compatibility reasons,
+SIGHUP can also be used in 6.3.X but may not be available in future
+fetchmail versions.
.PP
If
.I fetchmail
whichever of these is appropriate to wake it up.
.SH BUGS AND KNOWN PROBLEMS
+.PP
+Fetchmail cannot handle user names that contain blanks after a "@"
+character, for instance "demonstr@ti on". These are rather uncommon and
+only hurt when using UID-based \-\-keep setups, so the 6.3.X versions of
+fetchmail won't be fixed.
+.PP
+Please check the \fBNEWS\fP file that shipped with fetchmail for more
+known bugs than those listed here.
+.PP
+The assumptions that the DNS and in particular the checkalias options
+make are not often sustainable. For instance, it has become uncommon for
+an MX server to be a POP3 or IMAP server at the same time. Therefore the
+MX lookups may go away in a future release.
+.PP
The mda and plugin options interact badly. In order to collect error
status from the MDA, fetchmail has to change its normal signal
handling so that dead plugin processes don't get reaped until the end
zombies accumulate. So either don't deliver to a MDA using plugins or
risk being overrun by an army of undead.
.PP
+The \-\-interface option does not support IPv6 and it is doubtful if it
+ever will, since there is no portable way to query interface IPv6
+addresses.
+.PP
The RFC822 address parser used in multidrop mode chokes on some
@-addresses that are technically legal but bizarre. Strange uses of
quoting and embedded comments are likely to confuse it.
.PP
In a message with multiple envelope headers, only the last one
-processed will be visible to fetchmail. To get around this, use a
-mailserver-side filter that consolidates the contents of all envelope
-headers into a single one (procmail, mailagent, or maildrop can be
-programmed to do this fairly easily).
+processed will be visible to fetchmail.
.PP
Use of some of these protocols requires that the program send
unencrypted passwords over the TCP/IP connection to the mailserver.
This creates a risk that name/password pairs might be snaffled with a
packet sniffer or more sophisticated monitoring software. Under Linux
-and FreeBSD, the --interface option can be used to restrict polling to
+and FreeBSD, the \-\-interface option can be used to restrict polling to
availability of a specific interface device with a specific local or
remote IP address, but snooping is still possible if (a) either host
has a network device that can be opened in promiscuous mode, or (b)
.PP
Use of the %F or %T escapes in an mda option could open a security
hole, because they pass text manipulable by an attacker to a shell
-command. Potential shell characters are replaced by `_' before
+command. Potential shell characters are replaced by '_' before
execution. The hole is further reduced by the fact that fetchmail
temporarily discards any suid privileges it may have while running the
MDA. For maximum safety, however, don't use an mda command containing
%F or %T when fetchmail is run from the root account itself.
.PP
-Fetchmail's method of sending bouncemail and spam bounces requires that
-port 25 of localhost be available for sending mail via SMTP.
+Fetchmail's method of sending bounces due to errors or spam-blocking and
+spam bounces requires that port 25 of localhost be available for sending
+mail via SMTP.
.PP
If you modify a
.I ~/.fetchmailrc
while a background instance is running and break the syntax, the
-background instance will die silently. Unfortunately, it can't
+background instance will die silently. Unfortunately, it can't
die noisily because we don't yet know whether syslog should be enabled.
On some systems, fetchmail dies quietly even if there is no syntax
error; this seems to have something to do with buggy terminal ioctl
code in the kernel.
.PP
-The -f - option (reading a configuration from stdin) is incompatible
+The \-f\~\- option (reading a configuration from stdin) is incompatible
with the plugin option.
.PP
-The `principal' option only handles Kerberos IV, not V.
+The 'principal' option only handles Kerberos IV, not V.
+.PP
+Interactively entered passwords are truncated after 63 characters. If
+you really need to use a longer password, you will have to use a
+configuration file.
+.PP
+A backslash as the last character of a configuration file will be
+flagged as a syntax error rather than ignored.
.PP
Send comments, bug reports, gripes, and the like to the
-fetchmail-devel list <fetchmail-devel@lists.berlios.de>. An HTML FAQ is
+fetchmail\-devel list <fetchmail\-devel@lists.berlios.de>. An HTML FAQ is
available at the fetchmail home page; surf to
http://fetchmail.berlios.de/ or do a WWW search for pages with
-`fetchmail' in their titles.
+\&'fetchmail' in their titles.
.SH AUTHOR
-Eric S. Raymond <esr@snark.thyrsus.com>. Too many other people to
-name here have contributed code and patches.
-This program is descended from and replaces
-.IR popclient ,
-by Carl Harris <ceharris@mal.com>; the internals have become quite different,
+Fetchmail is currently maintained by Matthias Andree and Rob Funk with
+major assistance from Sunil Shetye (for code) and Rob MacGregor (for the
+mailing lists).
+.PP
+Most of the code is from Eric S. Raymond <esr@snark.thyrsus.com>. Too
+many other people to name here have contributed code and patches.
+.PP
+This program is descended from and replaces
+.IR popclient ,
+by Carl Harris <ceharris@mal.com>; the internals have become quite different,
but some of its interface design is directly traceable to that
ancestral program.
.PP
-This manual page has been improved by R.\ Hannes Beinert.
-.PP
-Fetchmail is currently maintained by Matthias Andree and Rob Funk.
+This manual page has been improved by R.\ Hannes Beinert and H\['e]ctor
+Garc\['i]a.
.SH SEE ALSO
mutt(1), elm(1), mail(1), sendmail(8), popd(8), imapd(8), netrc(5)
+
+The fetchmail home page: <http://fetchmail.berlios.de/>
+
+The maildrop home page: <http://www.courier-mta.org/maildrop/>
.SH APPLICABLE STANDARDS
+.PP
+Note that this list is just a collection of references and not a
+statement as to the actual protocol conformance or requirements in
+fetchmail.
.TP 5
SMTP/ESMTP:
-RFC 821, RFC2821, RFC 1869, RFC 1652, RFC 1870, RFC 1983, RFC 1985,
+RFC 821, RFC 2821, RFC 1869, RFC 1652, RFC 1870, RFC 1983, RFC 1985,
RFC 2554.
.TP 5
mail:
-RFC 822, RFC2822, RFC 1123, RFC 1892, RFC 1894.
+RFC 822, RFC 2822, RFC 1123, RFC 1892, RFC 1894.
.TP 5
POP2:
RFC 937
.TP 5
POP3:
-RFC 1081, RFC 1225, RFC 1460, RFC 1725, RFC1734, RFC 1939, RFC 1957,
-RFC2195, RFC 2449.
+RFC 1081, RFC 1225, RFC 1460, RFC 1725, RFC 1734, RFC 1939, RFC 1957,
+RFC 2195, RFC 2449.
.TP 5
APOP:
RFC 1460, RFC 1725, RFC 1939.