Linus Torvalds [Fri, 20 Dec 2013 17:34:54 +0000 (09:34 -0800)]
Merge tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen bugfixes from Konrad Rzeszutek Wilk:
- Fix balloon driver for auto-translate guests (PVHVM, ARM) to not use
scratch pages.
- Fix block API header for ARM32 and ARM64 to have proper layout
- On ARM when mapping guests, stick on PTE_SPECIAL
- When using SWIOTLB under ARM, don't call swiotlb functions twice
- When unmapping guests memory and if we fail, don't return pages which
failed to be unmapped.
- Grant driver was using the wrong address on ARM.
* tag 'stable/for-linus-3.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Seperate the auto-translate logic properly (v2)
xen/block: Correctly define structures in public headers on ARM32 and ARM64
arm: xen: foreign mapping PTEs are special.
xen/arm64: do not call the swiotlb functions twice
xen: privcmd: do not return pages which we have failed to unmap
XEN: Grant table address, xen_hvm_resume_frames, is a phys_addr not a pfn
Linus Torvalds [Fri, 20 Dec 2013 17:32:30 +0000 (09:32 -0800)]
Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"This fixes a long standing bug in the ftrace profiler. The problem is
that the profiler only initializes the online CPUs, and not possible
CPUs. This causes issues if the user takes CPUs online or offline
while the profiler is running.
If we online a CPU after starting the profiler, we lose all the trace
information on the CPU going online.
If we offline a CPU after running a test and start a new test, it will
not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling"
* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Initialize the ftrace profiler for each possible cpu
Linus Torvalds [Thu, 19 Dec 2013 17:10:46 +0000 (09:10 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"An ABI documentation fix, and a mixed-PMU perf-info-corruption fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Document the new transaction sample type
perf: Disable all pmus on unthrottling and rescheduling
Linus Torvalds [Thu, 19 Dec 2013 17:10:10 +0000 (09:10 -0800)]
Merge tag 'sound-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have a bit more changes than usual in ASoC here, as it was slipped
from the previous update. There are one minr ASoC PCM code fix and
ASoC dmaengine fix, in addition of a collection of small ASoC driver
fixes. The rest are a couple of HD-audio stable fixups, and a
long-standing fix for the paused stream handling.
So, all commits look not scary (and hopefully won't give you
disastrous holiday season)"
* tag 'sound-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add Dell headset detection quirk for one more laptop model
ASoC: wm8904: fix DSP mode B configuration
ASoC: wm_adsp: Add small delay while polling DSP RAM start
ALSA: Add SNDRV_PCM_STATE_PAUSED case in wait_for_avail function
ASoC: kirkwood: Fix the CPU DAI rates
ASoC: wm5110: Correct HPOUT3 DAPM route typo
ALSA: hda - Add Dell headset detection quirk for three laptop models
ALSA: hda - Add enable_msi=0 workaround for four HP machines
ASoC: don't leak on error in snd_dmaengine_pcm_register
ASoC: fsl: imx-wm8962: Don't update bias_level in machine driver
ASoC: tegra: fix uninitialized variables in set_fmt
ASoC: wm8962: Enable SYSCLK provisonally before fetching generated DSPCLK_DIV
ASoC: sam9x5_wm8731: change to work in DSP A mode
ASoC: atmel_ssc_dai: add dai trigger ops
ASoC: soc-pcm: Use valid condition for snd_soc_dai_digital_mute() in hw_free()
Linus Torvalds [Thu, 19 Dec 2013 03:05:00 +0000 (19:05 -0800)]
Merge branch 'akpm' (incoming from Andrew)
Merge patches from Andrew Morton:
"23 fixes and a MAINTAINERS update"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
mm/hugetlb: check for pte NULL pointer in __page_check_address()
fix build with make 3.80
mm/mempolicy: fix !vma in new_vma_page()
MAINTAINERS: add Davidlohr as GPT maintainer
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
mm/mempolicy: correct putback method for isolate pages if failed
mm: add missing dependency in Kconfig
sh: always link in helper functions extracted from libgcc
mm: page_alloc: exclude unreclaimable allocations from zone fairness policy
mm: numa: defer TLB flush for THP migration as long as possible
mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates
mm: fix TLB flush race between migration, and change_protection_range
mm: numa: avoid unnecessary disruption of NUMA hinting during migration
mm: numa: clear numa hinting information on mprotect
sched: numa: skip inaccessible VMAs
mm: numa: avoid unnecessary work on the failure path
mm: numa: ensure anon_vma is locked to prevent parallel THP splits
mm: numa: do not clear PTE for pte_numa update
mm: numa: do not clear PMD during PTE update scan
...
Jan Beulich [Thu, 19 Dec 2013 01:08:57 +0000 (17:08 -0800)]
fix build with make 3.80
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.
Commit 1bf49dd4be0b ("./Makefile: export initial ramdisk compression
config option") however introduced "else ifeq" constructs which make
3.80 doesn't understand. Replace the logic there with more conventional
(in the kernel build infrastructure) list constructs (except that the
list here is intentionally limited to exactly one element).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: P J P <ppandit@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wanpeng Li [Thu, 19 Dec 2013 01:08:56 +0000 (17:08 -0800)]
mm/mempolicy: fix !vma in new_vma_page()
BUG_ON(!vma) assumption is introduced by commit 0bf598d863e3 ("mbind:
add BUG_ON(!vma) in new_vma_page()"), however, even if
address = __vma_address(page, vma);
and
vma->start < address < vma->end
page_address_in_vma() may still return -EFAULT because of many other
conditions in it. As a result the while loop in new_vma_page() may end
with vma=NULL.
This patch revert the commit and also fix the potential dereference NULL
pointer reported by Dan.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Reported-by: Dave Jones <davej@redhat.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jianguo Wu [Thu, 19 Dec 2013 01:08:54 +0000 (17:08 -0800)]
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
After a successful hugetlb page migration by soft offline, the source
page will either be freed into hugepage_freelists or buddy(over-commit
page). If page is in buddy, page_hstate(page) will be NULL. It will
hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page().
Joonsoo Kim [Thu, 19 Dec 2013 01:08:52 +0000 (17:08 -0800)]
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
update_pageblock_skip() only fits to compaction which tries to isolate
by pageblock unit. If isolate_migratepages_range() is called by CMA, it
try to isolate regardless of pageblock unit and it don't reference
get_pageblock_skip() by ignore_skip_hint. We should also respect it on
update_pageblock_skip() to prevent from setting the wrong information.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sh: always link in helper functions extracted from libgcc
E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m:
ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined!
For "lib-y", if no symbols in a compilation unit are referenced by other
units, the compilation unit will not be included in vmlinux. This
breaks modules that do reference those symbols.
This doesn't fix all cases. There are others, e.g. udivsi3.
This is also not limited to sh, many architectures handle this in the
same way.
A simple solution is to unconditionally include all helper functions.
A more complex solution is to make the choice of "lib-y" or "obj-y" depend
on CONFIG_MODULES:
Johannes Weiner [Thu, 19 Dec 2013 01:08:47 +0000 (17:08 -0800)]
mm: page_alloc: exclude unreclaimable allocations from zone fairness policy
Dave Hansen noted a regression in a microbenchmark that loops around
open() and close() on an 8-node NUMA machine and bisected it down to
commit 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy").
That change forces the slab allocations of the file descriptor to spread
out to all 8 nodes, causing remote references in the page allocator and
slab.
The round-robin policy is only there to provide fairness among memory
allocations that are reclaimed involuntarily based on pressure in each
zone. It does not make sense to apply it to unreclaimable kernel
allocations that are freed manually, in this case instantly after the
allocation, and incur the remote reference costs twice for no reason.
Only round-robin allocations that are usually freed through page reclaim
or slab shrinking.
Bisected by Dave Hansen.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:45 +0000 (17:08 -0800)]
mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates
According to documentation on barriers, stores issued before a LOCK can
complete after the lock implying that it's possible tlb_flush_pending
can be visible after a page table update. As per revised documentation,
this patch adds a smp_mb__before_spinlock to guarantee the correct
ordering.
Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rik van Riel [Thu, 19 Dec 2013 01:08:44 +0000 (17:08 -0800)]
mm: fix TLB flush race between migration, and change_protection_range
There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.
The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.
During that time, a CPU may continue writing to the page.
This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.
When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.
This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).
The basic race looks like this:
CPU A CPU B CPU C
load TLB entry
make entry PTE/PMD_NUMA
fault on entry
read/write old page
start migrating page
change PTE/PMD to new page
read/write old page [*]
flush TLB
reload TLB from new entry
read/write new page
lose data
[*] the old page may belong to a new user at this point!
The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.
This should fix both NUMA migration and compaction.
[mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:42 +0000 (17:08 -0800)]
mm: numa: avoid unnecessary disruption of NUMA hinting during migration
do_huge_pmd_numa_page() handles the case where there is parallel THP
migration. However, by the time it is checked the NUMA hinting
information has already been disrupted. This patch adds an earlier
check with some helpers.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:41 +0000 (17:08 -0800)]
mm: numa: clear numa hinting information on mprotect
On a protection change it is no longer clear if the page should be still
accessible. This patch clears the NUMA hinting fault bits on a
protection change.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:38 +0000 (17:08 -0800)]
mm: numa: ensure anon_vma is locked to prevent parallel THP splits
The anon_vma lock prevents parallel THP splits and any associated
complexity that arises when handling splits during THP migration. This
patch checks if the lock was successfully acquired and bails from THP
migration if it failed for any reason.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:37 +0000 (17:08 -0800)]
mm: numa: do not clear PTE for pte_numa update
The TLB must be flushed if the PTE is updated but change_pte_range is
clearing the PTE while marking PTEs pte_numa without necessarily
flushing the TLB if it reinserts the same entry. Without the flush,
it's conceivable that two processors have different TLBs for the same
virtual address and at the very least it would generate spurious faults.
This patch only unmaps the pages in change_pte_range for a full
protection change.
[riel@redhat.com: write pte_numa pte back to the page tables] Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Chegu Vinod <chegu_vinod@hp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:36 +0000 (17:08 -0800)]
mm: numa: do not clear PMD during PTE update scan
If the PMD is flushed then a parallel fault in handle_mm_fault() will
enter the pmd_none and do_huge_pmd_anonymous_page() path where it'll
attempt to insert a huge zero page. This is wasteful so the patch
avoids clearing the PMD when setting pmd_numa.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:34 +0000 (17:08 -0800)]
mm: clear pmd_numa before invalidating
On x86, PMD entries are similar to _PAGE_PROTNONE protection and are
handled as NUMA hinting faults. The following two page table protection
bits are what defines them
_PAGE_NUMA:set _PAGE_PRESENT:clear
A PMD is considered present if any of the _PAGE_PRESENT, _PAGE_PROTNONE,
_PAGE_PSE or _PAGE_NUMA bits are set. If pmdp_invalidate encounters a
pmd_numa, it clears the present bit leaving _PAGE_NUMA which will be
considered not present by the CPU but present by pmd_present. The
existing caller of pmdp_invalidate should handle it but it's an
inconsistent state for a PMD. This patch keeps the state consistent
when calling pmdp_invalidate.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Thu, 19 Dec 2013 01:08:32 +0000 (17:08 -0800)]
mm: numa: serialise parallel get_user_page against THP migration
Base pages are unmapped and flushed from cache and TLB during normal
page migration and replaced with a migration entry that causes any
parallel NUMA hinting fault or gup to block until migration completes.
THP does not unmap pages due to a lack of support for migration entries
at a PMD level. This allows races with get_user_pages and
get_user_pages_fast which commit 3f926ab945b6 ("mm: Close races between
THP migration and PMD numa clearing") made worse by introducing a
pmd_clear_flush().
This patch forces get_user_page (fast and normal) on a pmd_numa page to
go through the slow get_user_page path where it will serialise against
THP migration and properly account for the NUMA hinting fault. On the
migration side the page table lock is taken for each PTE update.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vivek Goyal [Thu, 19 Dec 2013 01:08:31 +0000 (17:08 -0800)]
kexec: migrate to reboot cpu
Commit 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic
kernel") moved reboot= handling to generic code. In the process it also
removed the code in native_machine_shutdown() which are moving reboot
process to reboot_cpu/cpu0.
I guess that thought must have been that all reboot paths are calling
migrate_to_reboot_cpu(), so we don't need this special handling. But
kexec reboot path (kernel_kexec()) is not calling
migrate_to_reboot_cpu() so above change broke kexec. Now reboot can
happen on non-boot cpu and when INIT is sent in second kerneo to bring
up BP, it brings down the machine.
So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid
this problem.
Bisected by WANG Chao.
Reported-by: Matthew Whitehead <mwhitehe@redhat.com> Reported-by: Dave Young <dyoung@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Tested-by: WANG Chao <chaowang@redhat.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 18 Dec 2013 22:35:00 +0000 (14:35 -0800)]
Merge tag 'usb-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few USB fixes for things that have people have reported
issues with recently"
* tag 'usb-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ohci-at91: fix irq and iomem resource retrieval
usb: phy: fix driver dependencies
phy: kconfig: add depends on "USB_PHY" to OMAP_USB2 and TWL4030_USB
drivers: phy: tweaks to phy_create()
drivers: phy: Fix memory leak
xhci: Limit the spurious wakeup fix only to HP machines
usb: chipidea: fix nobody cared IRQ when booting with host role
usb: chipidea: host: Only disable the vbus regulator if it is not NULL
usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option
usb: cdc-wdm: manage_power should always set needs_remote_wakeup
usb: phy-tegra-usb.c: wrong pointer check for remap UTMI
usb: phy: twl6030-usb: signedness bug in twl6030_readb()
usb: dwc3: power off usb phy in error path
usb: dwc3: invoke phy_resume after phy_init
Linus Torvalds [Wed, 18 Dec 2013 22:34:27 +0000 (14:34 -0800)]
Merge tag 'tty-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a few fixes for 3.13-rc5 that resolve a number of reported
tty and serial driver issues"
* tag 'tty-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: xuartps: Properly guard sysrq specific code
n_tty: Fix apparent order of echoed output
serial: 8250_dw: add new ACPI IDs
serial: 8250_dw: Fix LCR workaround regression
tty: Fix hang at ldsem_down_read()
Linus Torvalds [Wed, 18 Dec 2013 22:33:57 +0000 (14:33 -0800)]
Merge tag 'staging-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a number of staging, and iio, fixes for 3.13-rc5 that resolve
some reported issues"
* tag 'staging-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
imx-drm: imx-drm-core: improve safety of imx_drm_add_crtc()
imx-drm: imx-drm-core: make imx_drm_crtc_register() safer
imx-drm: imx-drm-core: use defined constant for number of CRTCs.
imx-drm: imx-tve: don't call sleeping functions beneath enable_lock spinlock
imx-drm: ipu-v3: fix potential CRTC device registration race
imx-drm: imx-drm-core: fix DRM cleanup paths
imx-drm: imx-drm-core: fix error cleanup path for imx_drm_add_crtc()
staging: comedi: drivers: fix return value of comedi_load_firmware()
staging: comedi: 8255_pci: fix for newer PCI-DIO48H
iio:adc:ad7887 Fix channel reported endianness from cpu to big endian
iio:imu:adis16400 fix pressure channel scan type
staging:iio:mag:hmc5843 fix incorrect endianness of channel as a result of missuse of the IIO_ST macro.
iio: cm36651: Changed return value of read function
Linus Torvalds [Wed, 18 Dec 2013 22:33:23 +0000 (14:33 -0800)]
Merge tag 'driver-core-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here's a single sysfs fix for 3.13-rc5 that resolves a lockdep issue
in sysfs that has been reported"
* tag 'driver-core-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: give different locking key to regular and bin files
Linus Torvalds [Wed, 18 Dec 2013 22:09:08 +0000 (14:09 -0800)]
Merge branch 'keys-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull crypto key patches from David Howells:
"There are four items:
- A patch to fix X.509 certificate gathering. The problem was that I
was coming up with a different path for signing_key.x509 in the
build directory if it didn't exist to if it did exist. This meant
that the X.509 cert container object file would be rebuilt on the
second rebuild in a build directory and the kernel would get
relinked.
- Unconditionally remove files generated by SYSTEM_TRUSTED_KEYRING=y
when doing make mrproper.
- Actually initialise the persistent-keyring semaphore for
init_user_ns. I have no idea why this works at all for users in
the base user namespace unless it's something to do with systemd
containerising the system.
Hui Wang [Wed, 18 Dec 2013 10:09:56 +0000 (18:09 +0800)]
ALSA: hda - Add Dell headset detection quirk for one more laptop model
On the Dell machines with codec whose Subsystem Id is 0x10280640,
no external microphone can be detected when plugging a 3-ring headset.
Using ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix this problem.
The codec (Vendor ID: 0x10ec0255) on the machine belongs to alc_269
family.
BugLink: https://bugs.launchpad.net/bugs/1260303 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bo Shen [Wed, 18 Dec 2013 03:26:23 +0000 (11:26 +0800)]
ASoC: wm8904: fix DSP mode B configuration
When wm8904 work in DSP mode B, we still need to configure it to
work in DSP mode. Or else, it will work in Right Justified mode.
Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
Charles Keepax [Wed, 18 Dec 2013 09:25:49 +0000 (09:25 +0000)]
ASoC: wm_adsp: Add small delay while polling DSP RAM start
Some devices are getting very close to the limit whilst polling the RAM
start, this patch adds a small delay to this loop to give a longer
startup timeout.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
Russell King [Mon, 16 Dec 2013 12:39:31 +0000 (12:39 +0000)]
imx-drm: imx-drm-core: improve safety of imx_drm_add_crtc()
We must not add more CRTCs than we have declared to the vblank
helpers, otherwise we overflow their arrays. Force failure if we
exceed the number of CRTCs.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Mon, 16 Dec 2013 12:39:11 +0000 (12:39 +0000)]
imx-drm: imx-drm-core: make imx_drm_crtc_register() safer
imx_drm_crtc_register() doesn't clean up the CRTC upon failure, which
leaves the CRTC attached to the DRM device. Also, it does setup after
attaching the CRTC to the DRM device.
Fix this by reordering the function such that we do the setup before
drm_crtc_init(): this fixes both issues.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable lock claims that it is serializing tve_enable/disable calls.
However, DRM already serialises mode sets with a mutex, which prevents
encoder/connector functions being called concurrently. Secondly,
holding a spinlock while calling clk_prepare_enable() is wrong; it
will cause a might_sleep() warning should that debugging be enabled.
So, let's just get rid of the enable_lock.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the IPUv3 CRTC device registration; we don't need a separate
function just to call platform_device_register_data(), and we don't
need the return value converted at all.
Update the IPU client id under a mutex, so that parallel probing
doesn't race.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Mon, 16 Dec 2013 11:33:44 +0000 (11:33 +0000)]
imx-drm: imx-drm-core: fix DRM cleanup paths
We must call drm_vblank_cleanup() on the error cleanup and unload paths
after we've had a successful call to drm_vblank_init(). Ensure that
the calls are in the reverse order to the initialisation order.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Soren Brinkmann [Mon, 2 Dec 2013 19:38:38 +0000 (11:38 -0800)]
tty: xuartps: Properly guard sysrq specific code
Commit 'tty: xuartps: Implement BREAK detection, add SYSRQ support'
(0c0c47bc40a2e358d593b2d7fb93b50027fbfc0c) introduced sysrq support
without properly guarding sysrq specific code which results in build
errors when sysrq is disabled:
DNAME=KBUILD_STR(xilinx_uartps)" -c -o
drivers/tty/serial/.tmp_xilinx_uartps.o
drivers/tty/serial/xilinx_uartps.c
drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_isr':
drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port'
has no member named 'sysrq'
drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port'
has no member named 'sysrq'
drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port'
has no member named 'sysrq'
make[3]: *** [drivers/tty/serial/xilinx_uartps.o] Error 1
Reported-by: Masanari Iida <standby24x7@gmail.com> Cc: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
"A quick batch of fixes, including the annoying bad lock stack problem
introduced by udp_sk_rx_dst_set() locking change:
1) Use xchg() instead of sk_dst_lock() in udp_sk_rx_dst_set(), from
Eric Dumazet.
2) qlcnic bug fixes from Himanshu Madhani and Manish Chopra.
3) Update IPSEC MAINTAINERS entry, from Steffen Klassert.
4) Administrative neigh entry changes should generate netlink
notifications the same as event generated ones. From Bob
Gilligan.
5) Netfilter SYNPROXY fixes from Patrick McHardy.
6) Netfilter nft_reject endianness fixes from Eric Leblond"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
qlcnic: Dump mailbox registers when mailbox command times out.
qlcnic: Fix mailbox processing during diagnostic test
qlcnic: Allow firmware dump collection when auto firmware recovery is disabled
qlcnic: Fix memory allocation
qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter.
qlcnic: Fix TSS/RSS ring validation logic.
qlcnic: Fix diagnostic test for all adapters.
qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.
xen-netback: fix fragments error handling in checksum_setup_ip()
neigh: Netlink notification for administrative NUD state change
ipv4: improve documentation of ip_no_pmtu_disc
net: unix: allow bind to fail on mutex lock
MAINTAINERS: Update the IPsec maintainer entry
udp: ipv4: do not use sk_dst_lock from softirq context
netvsc: don't flush peers notifying work during setting mtu
can: peak_usb: fix mem leak in pcan_usb_pro_init()
can: ems_usb: fix urb leaks on failure paths
sctp: loading sctp when load sctp_probe
netfilter: nft_reject: fix endianness in dump function
netfilter: SYNPROXY target: restrict to INPUT/FORWARD
David S. Miller [Tue, 17 Dec 2013 22:21:30 +0000 (17:21 -0500)]
Merge branch 'fixes-for-3.13' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:
====================
this is a pull request with two fixes for net/master, the current release
cycle.
It consists of a patch by Alexey Khoroshilov from the Linux Driver Verification
project, which fixes a memory leak in ems_usb's failure patch. And a patch by
me which fixes a memory leak in the peak usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 17 Dec 2013 21:25:24 +0000 (16:25 -0500)]
Merge branch 'qlcnic'
Himanshu Madhani says:
====================
qlcnic: Bug fixes.
This series contains bug fixes for mailbox handling and multi Tx queue support
for all supported adapters.
changes from v1 -> v2
o updated patch to fix usage of netif_tx_{wake,stop} api during link change
as per David Miller's suggestion.
o Dropped patch to use spinklock per tx queue for more work.
o Added reworked patch for memory allocation failures.
o Added patch to allow capturing of dump, when auto recovery is disabled in firmware.
o Added patches for mailbox interrupt handling and debugging data for mailbox failure.
Please apply to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish chopra [Mon, 16 Dec 2013 20:37:03 +0000 (15:37 -0500)]
qlcnic: Dump mailbox registers when mailbox command times out.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish chopra [Mon, 16 Dec 2013 20:37:02 +0000 (15:37 -0500)]
qlcnic: Fix mailbox processing during diagnostic test
o Do not enable mailbox polling in case of legacy interrupt.
Process mailbox AEN/response from the interrupt.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 16 Dec 2013 20:37:01 +0000 (15:37 -0500)]
qlcnic: Allow firmware dump collection when auto firmware recovery is disabled
o Allow driver to collect firmware dump, during a forced firmware dump
operation, when auto firmware recovery is disabled. Also, during this
operation, driver should not allow reset recovery to be performed.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Mon, 16 Dec 2013 20:37:00 +0000 (15:37 -0500)]
qlcnic: Fix memory allocation
o Use vzalloc() instead of kzalloc() for allocation of
bootloader size memory. kzalloc() may fail to allocate
the size of bootloader
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:59 +0000 (15:36 -0500)]
qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter.
o Current code was not allowing the user to configure more
than one Tx ring using ethtool for 83xx/84xx adapter.
This regression was introduced by commit id 18afc102fdcb95d6c7d57f2967a06f2f8fe3ba4c ("qlcnic: Enable
multiple Tx queue support for 83xx/84xx Series adapter.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:58 +0000 (15:36 -0500)]
qlcnic: Fix TSS/RSS ring validation logic.
o TSS/RSS ring validation does not take into account that either
of these ring values can be 0. This patch fixes this validation
and would fail set_channel operation if any of these ring value
is 0. This regression was added as part of commit id 34e8c406fda5b5a9d2e126a92bab84cd28e3b5fa ("qlcnic: refactor Tx/SDS
ring calculation and validation in driver.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:57 +0000 (15:36 -0500)]
qlcnic: Fix diagnostic test for all adapters.
o Driver should re-allocate all Tx queues after completing
diagnostic tests. This regression was added by commit id c2c5e3a0681bb1945c0cb211a5f4baa22cb2cbb3 ("qlcnic: Enable
diagnostic test for multiple Tx queues.")
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himanshu Madhani [Mon, 16 Dec 2013 20:36:56 +0000 (15:36 -0500)]
qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.
o Driver was using netif_tx_{stop,wake}_all_queues() api
during link change event. Remove these api calls to
manage queue start/stop event, as core networking stack
will manage this based on netif_carrier_{on,off} call.
These API's were modified as part of commit id 012ec81223aa45d2b80aeafb77392fd1a19c7b10 ("qlcnic: Multi Tx
queue support for 82xx Series adapter.")
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Boris BREZILLON [Sun, 8 Dec 2013 14:59:59 +0000 (15:59 +0100)]
usb: ohci-at91: fix irq and iomem resource retrieval
When using dt resources retrieval (interrupts and reg properties) there is
no predefined order for these resources in the platform dev resources
table.
Retrieve resources using platform_get_resource and platform_get_irq
functions instead of direct resource table entries to avoid resource type
mismatch.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun [Mon, 16 Dec 2013 02:45:05 +0000 (10:45 +0800)]
xen-netback: fix fragments error handling in checksum_setup_ip()
Fix to return -EPROTO error if fragments detected in checksum_setup_ip().
Fixes: 1431fb31ecba ('xen-netback: fix fragment detection in checksum setup') Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bob Gilligan [Sun, 15 Dec 2013 21:39:56 +0000 (13:39 -0800)]
neigh: Netlink notification for administrative NUD state change
The neighbour code sends up an RTM_NEWNEIGH netlink notification if
the NUD state of a neighbour cache entry is changed by a timer (e.g.
from REACHABLE to STALE), even if the lladdr of the entry has not
changed.
But an administrative change to the the NUD state of a neighbour cache
entry that does not change the lladdr (e.g. via "ip -4 neigh change
... nud ...") does not trigger a netlink notification. This means
that netlink listeners will not hear about administrative NUD state
changes such as from a resolved state to PERMANENT.
This patch changes the neighbor code to generate an RTM_NEWNEIGH
message when the NUD state of an entry is changed administratively.
Signed-off-by: Bob Gilligan <gilligan@aristanetworks.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
staging: comedi: drivers: fix return value of comedi_load_firmware()
Some of the callback functions that upload the firmware in the comedi
drivers return a positive value indicating the number of bytes sent
to the device. Detect this condition and just return '0' to indicate
a successful upload.
Reported-by: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ian Abbott <abbotti@mev.co.uk> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 13 Dec 2013 12:00:30 +0000 (12:00 +0000)]
staging: comedi: 8255_pci: fix for newer PCI-DIO48H
At some point, Measurement Computing / ComputerBoards redesigned the
PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip.
This meant they had to put their hardware registers in the PCI BAR 2
region instead of PCI BAR 1. Unfortunately, they kept the same PCI
device ID for the new design. This means the driver recognizes the
newer cards, but doesn't work (and is likely to screw up the local
configuration registers of the PLX chip) because it's using the wrong
region.
Since the PCI subvendor and subdevice IDs were both zero on the old
design, but are the same as the vendor and device on the new design, we
can tell the old design and new design apart easily enough. Split the
existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new
entries, referenced by different entries in the PCI device ID table
`pci_8255_pci_table[]`. Use the same board name for both entries.
Merge tag 'iio-fixes-for-3.13c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Third set of fixes for IIO in the 3.13 cycle.
* Fix for a bug in the new cm36651 driver where it told the IIO driver it
was providing a decimal part, but then didn't. Now it correctly tells the
IIO core that it is only providing an integer value. This prevents random
incorrect values being output on a sysfs read.
* 3 fixes where drivers were miss specifying the endianness of their channels
as output through the buffer interface. These were discovered whilst
removing the terrible IIO_ST macro once and for all. The result is that
userspace may be informed that the buffer elements are being output as
little endian (on little endian platforms) when infact they are big endian.
Thus userspace will handle them incorrectly. This incorrect buffer
element specification is provided as sysfs attributes under
iio:deviceN/scan_elements.
Linus Torvalds [Tue, 17 Dec 2013 20:57:36 +0000 (12:57 -0800)]
Merge tag 's2mps11-build' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator/clk fix from Mark Brown:
"Fix s2mps11 build
This patch fixes a build failure that appeared in v3.13-rc4 due to an
RTC/MFD update merged via -mm"
* tag 's2mps11-build' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
mfd: s2mps11: Fix build after regmap field rename in sec-core.c
Jonathan Cameron [Wed, 11 Dec 2013 18:45:00 +0000 (18:45 +0000)]
iio:adc:ad7887 Fix channel reported endianness from cpu to big endian
Note this also sets the endianness to big endian whereas it would
previously have defaulted to the cpu endian. Hence technically
this is a bug fix on LE platforms.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 17 Dec 2013 20:36:26 +0000 (12:36 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Five self-contained fixlets:
- fix clocksource driver build bug
- fix two sched_clock() bugs triggering on specific hardware
- fix devicetree enumeration bug affecting specific hardware
- fix irq handler registration race resulting in boot crash
- fix device node refcount bug"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer"
clocksource: dw_apb_timer_of: Fix read_sched_clock
clocksource: sunxi: Stop timer from ticking before enabling interrupts
clocksource: clksrc-of: Do not drop unheld reference on device node
clocksource: armada-370-xp: Register sched_clock after the counter reset
clocksource: time-efm32: Select CLKSRC_MMIO
Linus Torvalds [Tue, 17 Dec 2013 20:35:54 +0000 (12:35 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Three fixes for scheduler crashes, each triggers in relatively rare,
hardware environment dependent situations"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Rework sched_fair time accounting
math64: Add mul_u64_u32_shr()
sched: Remove PREEMPT_NEED_RESCHED from generic code
sched: Initialize power_orig for overlapping groups
Jonathan Cameron [Wed, 11 Dec 2013 18:45:00 +0000 (18:45 +0000)]
iio:imu:adis16400 fix pressure channel scan type
A single channel in this driver was using the IIO_ST macro.
This does not provide a parameter for setting the endianness of
the channel. Thus this channel will have been reported as whatever
is the native endianness of the cpu rather than big endian. This
means it would be incorrect on little endian platforms.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
Jonathan Cameron [Wed, 11 Dec 2013 18:45:00 +0000 (18:45 +0000)]
staging:iio:mag:hmc5843 fix incorrect endianness of channel as a result of missuse of the IIO_ST macro.
This driver sets the shift value equal to IIO_BE (or 1) rather than setting
that to 0 and specificying the endianness. This means the channel type is
missreported as
[be|le]:u16/16>>1 where the be|le is dependent on the cpu native endianness,
rather than
be:u16/16>>0 resulting in any userspace code using this information, miss
converting the channel and generating thoroughly trashed data.
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
David S. Miller [Tue, 17 Dec 2013 20:06:20 +0000 (15:06 -0500)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
The following patchset contains two Netfilter fixes for your net
tree, they are:
* Fix endianness in nft_reject, the NFTA_REJECT_TYPE netlink attributes
was not converted to network byte order as needed by all nfnetlink
subsystems, from Eric Leblond.
* Restrict SYNPROXY target to INPUT and FORWARD chains, this avoid a
possible crash due to misconfigurations, from Patrick McHardy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Fri, 13 Dec 2013 15:54:22 +0000 (10:54 -0500)]
net: unix: allow bind to fail on mutex lock
This is similar to the set_peek_off patch where calling bind while the
socket is stuck in unix_dgram_recvmsg() will block and cause a hung task
spew after a while.
This is also the last place that did a straightforward mutex_lock(), so
there shouldn't be any more of these patches.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 15 Dec 2013 18:53:46 +0000 (10:53 -0800)]
udp: ipv4: do not use sk_dst_lock from softirq context
Using sk_dst_lock from softirq context is not supported right now.
Instead of adding BH protection everywhere,
udp_sk_rx_dst_set() can instead use xchg(), as suggested
by David.
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Fixes: 975022310233 ("udp: ipv4: must add synchronization in udp_sk_rx_dst_set()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 17 Dec 2013 19:46:51 +0000 (11:46 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull two Ceph fixes from Sage Weil:
"One of these is fixing a regression from the d_flags file type patch
that went into -rc1 that broke instantiation of inodes and dentries
(we were doing dentries first). The other is just an off-by-one
corner case"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: Avoid data inconsistency due to d-cache aliasing in readpage()
ceph: initialize inode before instantiating dentry
This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush
the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be
called from worker and also trying to hold the rtnl_lock. This will lead the
flush won't succeed forever. Solve this by not canceling and flushing the work,
this is safe because the transmission done by NETDEV_NOTIFY_PEERS was
synchronized with the netif_tx_disable() called by netvsc_change_mtu().
Reported-by: Yaju Cao <yacao@redhat.com> Tested-by: Yaju Cao <yacao@redhat.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 17 Dec 2013 19:43:46 +0000 (11:43 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
"Uli's patch fixes a regression in ptrace caused by a mis-merge of a
previous LE patch. The rest are all more endian fixes, all fairly
trivial, found during testing of 3.13-rc's"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/powernv: Fix OPAL LPC access in Little Endian
powerpc/powernv: Fix endian issue in opal_xscom_read
powerpc: Fix endian issues in crash dump code
powerpc/pseries: Fix endian issues in MSI code
powerpc/pseries: Fix PCIE link speed endian issue
powerpc/pseries: Fix endian issues in nvram code
powerpc/pseries: Fix endian issues in /proc/ppc64/lparcfg
powerpc: Fix topology core_id endian issue on LE builds
powerpc: Fix endian issue in setup-common.c
powerpc: PTRACE_PEEKUSR always returns FPR0
Josh Boyer [Fri, 11 Oct 2013 12:45:51 +0000 (08:45 -0400)]
cpupower: Fix segfault due to incorrect getopt_long arugments
If a user calls 'cpupower set --perf-bias 15', the process will end with
a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi
call. This is because the getopt_long structure currently has all of
the options as having an optional_argument when they really have a
required argument. We change the structure to use required_argument to
match the short options and it resolves the issue.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439
Peter Hurley [Mon, 9 Dec 2013 23:06:07 +0000 (18:06 -0500)]
n_tty: Fix apparent order of echoed output
With block processing of echoed output, observed output order is still
required. Push completed echoes and echo commands prior to output.
Introduce echo_mark echo buffer index, which tracks completed echo
commands; ie., those submitted via commit_echoes but which may not
have been committed. Ensure that completed echoes are output prior
to subsequent terminal writes in process_echoes().
Fixes newline/prompt output order in cooked mode shell.
JongHo Kim [Tue, 17 Dec 2013 14:02:24 +0000 (23:02 +0900)]
ALSA: Add SNDRV_PCM_STATE_PAUSED case in wait_for_avail function
When the process is sleeping at the SNDRV_PCM_STATE_PAUSED
state from the wait_for_avail function, the sleep process will be woken by
timeout(10 seconds). Even if the sleep process wake up by timeout, by this
patch, the process will continue with sleep and wait for the other state.
Signed-off-by: JongHo Kim <furmuwon@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes the rates declared in the CPU DAI parameters:
- SNDRV_PCM_RATE_KNOT and the discrete rates SNDRV_PCM_RATE_xxx should
not be used with SNDRV_PCM_RATE_CONTINUOUS,
- SNDRV_PCM_RATE_CONTINUOUS asks for rate_min and rate_max,
- the device may do streaming down to 5512Hz.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
Kirill Tkhai [Wed, 27 Nov 2013 15:59:13 +0000 (19:59 +0400)]
sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entities
This patch touches the RT group scheduling case.
Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's
priority, while rt_rq passed to them may be not the top-level rt_rq.
This is wrong, because changing of priority on a child level does not
guarantee that the priority is the highest all over the rq. So, this
leak makes RT balancing unusable.
The short example: the task having the highest priority among all rq's
RT tasks (no one other task has the same priority) are waking on a
throttle rt_rq. The rq's cpupri is set to the task's priority
equivalent, but real rq->rt.highest_prio.curr is less.
The patch below fixes the problem.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by: Peter Zijlstra <peterz@infradead.org> CC: Steven Rostedt <rostedt@goodmis.org> CC: stable@vger.kernel.org Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mel Gorman [Tue, 17 Dec 2013 09:21:25 +0000 (09:21 +0000)]
sched: Assign correct scheduling domain to 'sd_llc'
Commit 42eb088e (sched: Avoid NULL dereference on sd_busy) corrected a NULL
dereference on sd_busy but the fix also altered what scheduling domain it
used for the 'sd_llc' percpu variable.
One impact of this is that a task selecting a runqueue may consider
idle CPUs that are not cache siblings as candidates for running.
Tasks are then running on CPUs that are not cache hot.
This was found through bisection where ebizzy threads were not seeing equal
performance and it looked like a scheduling fairness issue. This patch
mitigates but does not completely fix the problem on all machines tested
implying there may be an additional bug or a common root cause. Here are
the average range of performance seen by individual ebizzy threads. It
was tested on top of candidate patches related to x86 TLB range flushing.
4-core machine
3.13.0-rc3 3.13.0-rc3
vanilla fixsd-v3r3
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.34 ( 0.00%) 0.10 ( 70.59%)
Mean 3 1.29 ( 0.00%) 0.93 ( 27.91%)
Mean 4 7.08 ( 0.00%) 0.77 ( 89.12%)
Mean 5 193.54 ( 0.00%) 2.14 ( 98.89%)
Mean 6 151.12 ( 0.00%) 2.06 ( 98.64%)
Mean 7 115.38 ( 0.00%) 2.04 ( 98.23%)
Mean 8 108.65 ( 0.00%) 1.92 ( 98.23%)
8-core machine
Mean 1 0.00 ( 0.00%) 0.00 ( 0.00%)
Mean 2 0.40 ( 0.00%) 0.21 ( 47.50%)
Mean 3 23.73 ( 0.00%) 0.89 ( 96.25%)
Mean 4 12.79 ( 0.00%) 1.04 ( 91.87%)
Mean 5 13.08 ( 0.00%) 2.42 ( 81.50%)
Mean 6 23.21 ( 0.00%) 69.46 (-199.27%)
Mean 7 15.85 ( 0.00%) 101.72 (-541.77%)
Mean 8 109.37 ( 0.00%) 19.13 ( 82.51%)
Mean 12 124.84 ( 0.00%) 28.62 ( 77.07%)
Mean 16 113.50 ( 0.00%) 24.16 ( 78.71%)
It's eliminated for one machine and reduced for another.
Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: H Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20131217092124.GV11295@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince Weaver [Fri, 13 Dec 2013 20:52:25 +0000 (15:52 -0500)]
perf: Document the new transaction sample type
Commit fdfbbd07e91f8fe3871 ("perf: Add generic transaction flags")
added support for PERF_SAMPLE_TRANSACTION but forgot to add documentation
for the sample type to include/uapi/linux/perf_event.h
perf: Disable all pmus on unthrottling and rescheduling
Currently, only one PMU in a context gets disabled during unthrottling
and event_sched_{out,in}(), however, events in one context may belong to
different pmus, which results in PMUs being reprogrammed while they are
still enabled.
This means that mixed PMU use [which is rare in itself] resulted in
potentially completely unreliable results: corrupted events, bogus
results, etc.
This patch temporarily disables PMUs that correspond to
each event in the context while these events are being modified.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: http://lkml.kernel.org/r/1387196256-8030-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Charles Keepax [Tue, 17 Dec 2013 13:16:16 +0000 (13:16 +0000)]
ASoC: wm5110: Correct HPOUT3 DAPM route typo
Reported-by: Kyung-Kwee Ryu <kyung-kwee.ryu@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
can: peak_usb: fix mem leak in pcan_usb_pro_init()
This patch fixes a memory leak in pcan_usb_pro_init(). In patch
f14e224 net: can: peak_usb: Do not do dma on the stack
the struct pcan_usb_pro_fwinfo *fi and struct pcan_usb_pro_blinfo *bi were
converted from stack to dynamic allocation va kmalloc(). However the
corresponding kfree() was not introduced.
There are a couple failure paths where urb leaks.
Is spare code within ems_usb_start_xmit(),
usb_free_urb() should be used to deallocate urb instead of usb_unanchor_urb().
In ems_usb_start() there is no usb_free_urb() if usb_submit_urb() fails.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Sebastian Haas <dev@sebastianhaas.info> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Felipe Balbi [Tue, 10 Dec 2013 23:00:06 +0000 (17:00 -0600)]
usb: phy: fix driver dependencies
both isp1301-omap and fsl_usb2_otg drivers
depend on usb_bus_start_enum() which is only
defined if CONFIG_USB != n. There is a problem,
however, where both those drivers could be
statically linked, while CONFIG_USB=m.
Fix the problem by fixing driver dependency.
Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Hogan [Tue, 10 Dec 2013 22:28:04 +0000 (22:28 +0000)]
serial: 8250_dw: Fix LCR workaround regression
Commit c49436b657d0 (serial: 8250_dw: Improve unwritable LCR workaround)
caused a regression. It added a check that the LCR was written properly
to detect and workaround the busy quirk, but the behaviour of bit 5
(UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the
docs. On older versions this caused the check to fail and it would
repeatedly force idle and rewrite the LCR register, causing delays and
preventing any input from serial being received.
This is fixed by masking out UART_LCR_SPAR before making the comparison.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Tim Kryger <tim.kryger@linaro.org> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Matt Porter <matt.porter@linaro.org> Cc: Markus Mayer <markus.mayer@linaro.org> Tested-by: Tim Kryger <tim.kryger@linaro.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wangweidong [Fri, 13 Dec 2013 03:00:10 +0000 (11:00 +0800)]
sctp: loading sctp when load sctp_probe
when I modprobe sctp_probe, it failed with "FATAL: ". I found that
sctp should load before sctp_probe register jprobe. So I add a
sctp_setup_jprobe for loading 'sctp' when first failed to register
jprobe, just do this similar to dccp_probe.
v2: add MODULE_SOFTDEP and check of request_module, as suggested by Neil
Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / ~andy / linux / log