Linus Torvalds [Fri, 28 Feb 2014 19:49:09 +0000 (11:49 -0800)]
Merge tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two fixes below for PCI devices disappearing when a reference count
underflow happens after a couple of insmod/rmmod cycles in succession"
* tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
i7300_edac: Fix device reference count
i7core_edac: Fix PCI device reference count
Linus Torvalds [Fri, 28 Feb 2014 19:45:03 +0000 (11:45 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three x86 fixes and one for ARM/ARM64.
In particular, nested virtualization on Intel is broken in 3.13 and
fixed by this pull request"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm, vmx: Really fix lazy FPU on nested guest
kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
KVM: MMU: drop read-only large sptes when creating lower level sptes
Catalin Marinas [Fri, 28 Feb 2014 16:12:25 +0000 (16:12 +0000)]
arm64: Fix !CONFIG_SMP kernel build
Commit fb4a96029c8a (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Dave P Martin <Dave.Martin@arm.com>
Steve Capper [Tue, 25 Feb 2014 11:38:53 +0000 (11:38 +0000)]
arm64: mm: Add double logical invert to pte accessors
Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13]
[ The current diag data is so big that it overflows the printk
buffer pretty quickly in cases when we get a handful of errors
at once which can happen. --BenH
]
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Tue, 25 Feb 2014 07:28:37 +0000 (15:28 +0800)]
powerpc/powernv: Dump PHB diag-data immediately
The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.
This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Paul Mackerras [Wed, 26 Feb 2014 06:07:38 +0000 (17:07 +1100)]
powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes. This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.
To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.
Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.
In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.
This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone. It is not clear why this function would
ever be used on a 64-bit process, though.
Signed-off-by: Paul Mackerras <paulus@samba.org> CC: <stable@vger.kernel.org> [v3.13] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Laurent Dufour [Mon, 24 Feb 2014 16:30:55 +0000 (17:30 +0100)]
powerpc/crashdump : Fix page frame number check in copy_oldmem_page
In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.
This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.
This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.
Tony Breeds [Thu, 20 Feb 2014 10:13:52 +0000 (21:13 +1100)]
powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token. We then pass that directly to rtas. This is
fine on big endian however on little endian the token is not what we
expect.
This will typically result in hitting:
panic("Alas, I survived.\n");
To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Paolo Bonzini [Thu, 27 Feb 2014 21:54:11 +0000 (22:54 +0100)]
kvm, vmx: Really fix lazy FPU on nested guest
Commit e504c9098ed6 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Linus Torvalds [Thu, 27 Feb 2014 18:54:52 +0000 (10:54 -0800)]
Merge tag 'metag-fixes-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull Metag arch and asm-generic fixes from James Hogan:
- Add the new sched_setattr/sched_getattr syscalls to the asm-generic
syscall list, which is used by arc, arm64, c6x, hexagon, metag,
openrisc, score, tile, and unicore32.
- An IRQ affinity bug fix for metag to prevent interrupts being
vectored to offline CPUs when their affinity is changed via
/proc/irq/ (thanks tglx).
* tag 'metag-fixes-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
irq-metag*: stop set_affinity vectoring to offline cpus
asm-generic: add sched_setattr/sched_getattr syscalls
Linus Torvalds [Thu, 27 Feb 2014 18:54:20 +0000 (10:54 -0800)]
Merge tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"Just a single trivial patch to plug a memory leak in an error path"
* tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: lp3943: Fix potential memory leak during request
Linus Torvalds [Thu, 27 Feb 2014 18:37:22 +0000 (10:37 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull filesystem fixes from Jan Kara:
"Notification, writeback, udf, quota fixes
The notification patches are (with one exception) a fallout of my
fsnotify rework which went into -rc1 (I've extented LTP to cover these
cornercases to avoid similar breakage in future).
The UDF patch is a nasty data corruption Al has recently reported,
the revert of the writeback patch is due to possibility of violating
sync(2) guarantees, and a quota bug can lead to corruption of quota
files in ocfs2"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Allocate overflow events with proper type
fanotify: Handle overflow in case of permission events
fsnotify: Fix detection whether overflow event is queued
Revert "writeback: do not sync data dirtied after sync start"
quota: Fix race between dqput() and dquot_scan_active()
udf: Fix data corruption on file type conversion
inotify: Fix reporting of cookies for inotify events
The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address. When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one. On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.
As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio. In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented. The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer. If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.
However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.
Fixes: f78146b0f9230765c6315b2e14f56112513389ad Signed-off-by: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org (3.5+) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Zyngier [Wed, 26 Feb 2014 18:47:36 +0000 (18:47 +0000)]
arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added
support for CPU power-management, using a cpu_notifier to re-init
KVM on a CPU that entered CPU idle.
The code assumed that a CPU entering idle would actually be powered
off, loosing its state entierely, and would then need to be
reinitialized. It turns out that this is not always the case, and
some HW performs CPU PM without actually killing the core. In this
case, we try to reinitialize KVM while it is still live. It ends up
badly, as reported by Andre Przywara (using a Calxeda Midway):
[ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
[ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150
[ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0
The trick here is to detect if we've been through a full re-init or
not by looking at HVBAR (VBAR_EL2 on arm64). This involves
implementing the backend for __hyp_get_vectors in the main KVM HYP
code (rather small), and checking the return value against the
default one when the CPU notifier is called on CPU_PM_EXIT.
Reported-by: Andre Przywara <osp@andrep.de> Tested-by: Andre Przywara <osp@andrep.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <rob.herring@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marcelo Tosatti [Mon, 24 Feb 2014 16:59:32 +0000 (13:59 -0300)]
KVM: MMU: drop read-only large sptes when creating lower level sptes
Read-only large sptes can be created due to read-only faults as
follows:
- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).
Fix by dropping large spte when necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pwm: lp3943: Fix potential memory leak during request
Fix a memory leak in the lp3943_pwm_request_map() error handling path.
Make sure already allocated pwm map memory is freed correctly.
Detected by Coverity: CID 1162829.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Linus Torvalds [Tue, 25 Feb 2014 23:38:13 +0000 (15:38 -0800)]
Merge branch 'akpm' (patches from Andrew Morton)
Merge misc fixes from Andrew Morton.
* emailed patches from Andrew Morton akpm@linux-foundation.org>:
MAINTAINERS: change mailing list address for Altera UART drivers
Makefile: fix build with make 3.80 again
MAINTAINERS: update L: misuses
Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
ipc,mqueue: remove limits for the amount of system-wide queues
memcg: change oom_info_lock to mutex
mm, thp: fix infinite loop on memcg OOM
drivers/fmc/fmc-write-eeprom.c: fix decimal permissions
drivers/iommu/omap-iommu-debug.c: fix decimal permissions
mm, hwpoison: release page on PageHWPoison() in __do_fault()
Jan Beulich [Tue, 25 Feb 2014 23:01:48 +0000 (15:01 -0800)]
Makefile: fix build with make 3.80 again
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions. Commit 8779657d29c0
("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") however
introduced an "else ifdef" construct which make 3.80 doesn't understand.
Also correct a warning message still referencing the old config option
name.
Apart from that I question the use of "ifdef" here (but it was used that
way already prior to said commit): ifeq (,y) would seem more to the
point.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fathi Boudra [Tue, 25 Feb 2014 23:01:46 +0000 (15:01 -0800)]
Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
An extra parenthesis typo introduced in 19952a92037e ("stackprotector:
Unify the HAVE_CC_STACKPROTECTOR logic between architectures") is
causing the following error when CONFIG_CC_STACKPROTECTOR_REGULAR is
enabled:
Makefile:608: Cannot use CONFIG_CC_STACKPROTECTOR: -fstack-protector not supported by compiler
Makefile:608: *** missing separator. Stop.
Davidlohr Bueso [Tue, 25 Feb 2014 23:01:45 +0000 (15:01 -0800)]
ipc,mqueue: remove limits for the amount of system-wide queues
Commit 93e6f119c0ce ("ipc/mqueue: cleanup definition names and
locations") added global hardcoded limits to the amount of message
queues that can be created. While these limits are per-namespace,
reality is that it ends up breaking userspace applications.
Historically users have, at least in theory, been able to create up to
INT_MAX queues, and limiting it to just 1024 is way too low and dramatic
for some workloads and use cases. For instance, Madars reports:
"This update imposes bad limits on our multi-process application. As
our app uses approaches that each process opens its own set of queues
(usually something about 3-5 queues per process). In some scenarios
we might run up to 3000 processes or more (which of-course for linux
is not a problem). Thus we might need up to 9000 queues or more. All
processes run under one user."
Other affected users can be found in launchpad bug #1155695:
https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/1155695
Instead of increasing this limit, revert it entirely and fallback to the
original way of dealing queue limits -- where once a user's resource
limit is reached, and all memory is used, new queues cannot be created.
Michal Hocko [Tue, 25 Feb 2014 23:01:44 +0000 (15:01 -0800)]
memcg: change oom_info_lock to mutex
Kirill has reported the following:
Task in /test killed as a result of limit of /test
memory: usage 10240kB, limit 10240kB, failcnt 51
memory+swap: usage 10240kB, limit 10240kB, failcnt 0
kmem: usage 0kB, limit 18014398509481983kB, failcnt 0
Memory cgroup stats for /test:
BUG: sleeping function called from invalid context at kernel/cpu.c:68
in_atomic(): 1, irqs_disabled(): 0, pid: 66, name: memcg_test
2 locks held by memcg_test/66:
#0: (memcg_oom_lock#2){+.+...}, at: [<ffffffff81131014>] pagefault_out_of_memory+0x14/0x90
#1: (oom_info_lock){+.+...}, at: [<ffffffff81197b2a>] mem_cgroup_print_oom_info+0x2a/0x390
CPU: 2 PID: 66 Comm: memcg_test Not tainted 3.14.0-rc1-dirty #745
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
__might_sleep+0x16a/0x210
get_online_cpus+0x1c/0x60
mem_cgroup_read_stat+0x27/0xb0
mem_cgroup_print_oom_info+0x260/0x390
dump_header+0x88/0x251
? trace_hardirqs_on+0xd/0x10
oom_kill_process+0x258/0x3d0
mem_cgroup_oom_synchronize+0x656/0x6c0
? mem_cgroup_charge_common+0xd0/0xd0
pagefault_out_of_memory+0x14/0x90
mm_fault_error+0x91/0x189
__do_page_fault+0x48e/0x580
do_page_fault+0xe/0x10
page_fault+0x22/0x30
which complains that mem_cgroup_read_stat cannot be called from an atomic
context but mem_cgroup_print_oom_info takes a spinlock. Change
oom_info_lock to a mutex.
This was introduced by 947b3dd1a84b ("memcg, oom: lock
mem_cgroup_print_oom_info").
Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masayoshi Mizuma reported a bug with the hang of an application under
the memcg limit. It happens on write-protection fault to huge zero page
If we successfully allocate a huge page to replace zero page but hit the
memcg limit we need to split the zero page with split_huge_page_pmd()
and fallback to small pages.
The other part of the problem is that VM_FAULT_OOM has special meaning
in do_huge_pmd_wp_page() context. __handle_mm_fault() expects the page
to be split if it sees VM_FAULT_OOM and it will will retry page fault
handling. This causes an infinite loop if the page was not split.
do_huge_pmd_wp_zero_page_fallback() can return VM_FAULT_OOM if it failed
to allocate one small page, so fallback to small pages will not help.
The solution for this part is to replace VM_FAULT_OOM with
VM_FAULT_FALLBACK is fallback required.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
James Hogan [Tue, 25 Feb 2014 22:05:35 +0000 (22:05 +0000)]
irq-metag*: stop set_affinity vectoring to offline cpus
Fix irq_set_affinity callbacks in the Meta IRQ chip drivers to AND
cpu_online_mask into the cpumask when picking a CPU to vector the
interrupt to.
As Thomas pointed out, the /proc/irq/$N/smp_affinity interface doesn't
filter out offline CPUs, so without this patch if you offline CPU0 and
set an IRQ affinity to 0x3 it vectors the interrupt onto CPU0 even
though it is offline.
Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-metag@vger.kernel.org Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 25 Feb 2014 21:16:05 +0000 (13:16 -0800)]
Merge tag 'for-linus-20140225' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Two main MTD fixes:
1. Read retry counting was off by one, so if we had a true ECC error
(i.e., no retry voltage threshold would give a clean read), we
would end up returning -EINVAL on the Nth mode instead of -EBADMSG
after then (N-1)th mode
2. The OMAP NAND driver had some of its ECC layouts wrong when
introduced in 3.13, causing incompatibilities between the
bootloader on-flash layout and the layout expected in Linux. The
expected layouts are now documented in the commit messages, and we
plan to add this under Documentation/mtd/nand/ eventually"
* tag 'for-linus-20140225' of git://git.infradead.org/linux-mtd:
mtd: nand: omap: fix ecclayout->oobfree->length
mtd: nand: omap: fix ecclayout->oobfree->offset
mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
mtd: nand: fix off-by-one read retry mode counting
Linus Torvalds [Tue, 25 Feb 2014 21:12:19 +0000 (13:12 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven:
- More barrier.h consolidation
- Sched_[gs]etattr() syscalls
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up sched_setattr and sched_getattr
m68k: Switch to asm-generic/barrier.h
m68k: Sort arch/m68k/include/asm/Kbuild
Linus Torvalds [Tue, 25 Feb 2014 21:10:48 +0000 (13:10 -0800)]
Merge tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux
Pull tensa fixes from Chris Zankel:
"This series includes fixes for potentially serious bugs in the
routines spilling processor registers to stack, as well as other
issues and compiler errors and warnings.
- allow booting xtfpga on boards with new uBoot and >128MBytes memory
- drop nonexistent GPIO32 support from fsf variant
- don't select USE_GENERIC_SMP_HELPERS
- enable common clock framework support, set up ethoc clock on xtfpga
- wire up sched_setattr and sched_getattr syscalls.
- fix system call to spill the processor registers to stack.
- improve kernel macro to spill the processor registers
- export ccount_freq symbol
- fix undefined symbol warning"
* tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux:
xtensa: wire up sched_setattr and sched_getattr syscalls
xtensa: xtfpga: set ethoc clock frequency
xtensa: xtfpga: use common clock framework
xtensa: support common clock framework
xtensa: no need to select USE_GENERIC_SMP_HELPERS
xtensa: fsf: drop nonexistent GPIO32 support
xtensa: don't pass high memory to bootmem allocator
xtensa: fix fast_syscall_spill_registers
xtensa: fix fast_syscall_spill_registers
xtensa: save current register frame in fast_syscall_spill_registers_fixup
xtensa: introduce spill_registers_kernel macro
xtensa: export ccount_freq
xtensa: fix warning '"CONFIG_OF" is not defined'
Dan Williams [Thu, 20 Feb 2014 00:19:35 +0000 (16:19 -0800)]
ioat: fix tasklet tear down
Since commit 77873803363c "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case. As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up. A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources(). Only
->alloc_chan_resources() can clear this condition in affected kernels.
This problem has been present since commit 3e037454bcfa "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs. For now, just tear down the irq and tasklet properly by:
Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Reported-by: Mike Galbraith <bitbucket@online.de> Reported-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Tested-by: Mike Galbraith <bitbucket@online.de> Tested-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jan Kara [Fri, 21 Feb 2014 18:14:11 +0000 (19:14 +0100)]
fsnotify: Allocate overflow events with proper type
Commit 7053aee26a35 "fsnotify: do not share events between notification
groups" used overflow event statically allocated in a group with the
size of the generic notification event. This causes problems because
some code looks at type specific parts of event structure and gets
confused by a random data it sees there and causes crashes.
Fix the problem by allocating overflow event with type corresponding to
the group type so code cannot get confused.
Jan Kara [Fri, 21 Feb 2014 18:07:54 +0000 (19:07 +0100)]
fanotify: Handle overflow in case of permission events
If the event queue overflows when we are handling permission event, we
will never get response from userspace. So we must avoid waiting for it.
Change fsnotify_add_notify_event() to return whether overflow has
happened so that we can detect it in fanotify_handle_event() and act
accordingly.
Jan Kara [Fri, 21 Feb 2014 18:02:34 +0000 (19:02 +0100)]
fsnotify: Fix detection whether overflow event is queued
Currently we didn't initialize event's list head when we removed it from
the event list. Thus a detection whether overflow event is already
queued wasn't working. Fix it by always initializing the list head when
deleting event from a list.
Jean Delvare [Tue, 25 Feb 2014 08:43:13 +0000 (09:43 +0100)]
i7300_edac: Fix device reference count
pci_get_device() decrements the reference count of "from" (last
argument) so when we break off the loop successfully we have only one
device reference - and we don't know which device we have. If we want
a reference to each device, we must take them explicitly and let
the pci_get_device() walk complete to avoid duplicate references.
This is serious, as over-putting device references will cause
the device to eventually disappear. Without this fix, the kernel
crashes after a few insmod/rmmod cycles.
Tested on an Intel S7000FC4UR system with a 7300 chipset.
Jean Delvare [Mon, 24 Feb 2014 08:39:27 +0000 (09:39 +0100)]
i7core_edac: Fix PCI device reference count
The reference count changes done by pci_get_device can be a little
misleading when the usage diverges from the most common scheme. The
reference count of the device passed as the last parameter is always
decreased, even if the function returns no new device. So if we are
going to try alternative device IDs, we must manually increment the
device reference count before each retry. If we don't, we end up
decreasing the reference count, and after a few modprobe/rmmod cycles
the PCI devices will vanish.
In other words and as Alan put it: without this fix the EDAC code
corrupts the PCI device list.
This fixes kernel bug #50491:
https://bugzilla.kernel.org/show_bug.cgi?id=50491
Linus Torvalds [Mon, 24 Feb 2014 15:58:50 +0000 (07:58 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 bug fixes from Martin Schwidefsky:
"A couple of s390 bug fixes. The PCI segment boundary issue is a nasty
one as it can lead to data corruption"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix missing subchannels after CHPID configure on
s390/pci/dma: use correct segment boundary size
s390/compat: fix sys_sched_getattr compat wrapper
s390/zcrypt: additional check to avoid overflow in msg-type 6 requests
Add the sched_setattr and sched_getattr syscalls to the generic syscall
list, which is used by the following architectures: arc, arm64, c6x,
hexagon, metag, openrisc, score, tile, unicore32.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arch@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: linux-c6x-dev@linux-c6x.org Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Chris Zankel [Mon, 24 Feb 2014 08:34:36 +0000 (00:34 -0800)]
Merge tag 'xtensa-for-next-20140221-1' into for_next
Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.
Linus Torvalds [Mon, 24 Feb 2014 01:38:04 +0000 (17:38 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes for ARM platforms. Most are fixes for DTS
files, mostly from DT conversion on OMAP which is still finding a few
issues here and there.
There's a couple of small stale code removal patches that we usually
queue for the next release instead, but they seemed harmless enough to
bring in now.
Also, a fix for backlight on some PXA platforms, and a cache
configuration fix for Tegra, etc"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
ARM: tegra: only run PL310 init on systems with one
ARM: tegra: Add head numbers to display controllers
ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
ARM: tegra: fix RTC0 alias for Cardhu
ARM: dove: dt: revert PMU interrupt controller node
Documentation: dt: OMAP: Update Overo/Tobi
ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
ARM: dts: omap3-tobi: Use the correct vendor prefix
ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
ARM: OMAP2+: Remove legacy macros for zoom platforms
ARM: OMAP2+: Remove MACH_NOKIA_N800
ARM: dts: N900: add missing compatible property
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
ARM: OMAP1: nokia770: enable tahvo-usb
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
ARM: dts: omap3-gta04: Fix mmc1 properties.
ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
ARM: OMAP2+: add missing ARCH_HAS_OPP
...
Linus Torvalds [Mon, 24 Feb 2014 01:37:25 +0000 (17:37 -0800)]
Merge tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Mostly unexciting driver fixes, plus one fix to lower the severity of
the log message when we don't use an optional regulator - the fixes
for ACPI system made this come up more often and it was correctly
observed that it was causing undue concern for users"
* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max14577: Fix invalid return value on DT parse success
regulator: core: Change dummy supplies error message to a warning
regulator: s5m8767: Add missing of_node_put
regulator: s5m8767: Use of_get_child_by_name
regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
Pekon Gupta [Mon, 17 Feb 2014 07:41:24 +0000 (13:11 +0530)]
mtd: nand: omap: fix ecclayout->oobfree->offset
1) In current implementation, ecclayout->oobfree->offset is calculated with
respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
be stored contiguously in OOB.
So, this patch calculates ecclayout->oobfree->offset with respect to last
ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.
2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
which should not be over-written by any file-system metadata.
So this patch aligns oobfree->offset taking into account of such markers.
CC: <stable@vger.kernel.org> # 3.13.x+ Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pekon Gupta [Mon, 17 Feb 2014 07:41:23 +0000 (13:11 +0530)]
mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
Fixes: commit a919e51161b58ed7e6e663daba99ab7d558808f3
mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
However, this patch also touches other ecc-schemes as the fix required
refactoring common code, into ecc-scheme specific code.
This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]
[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
Chapter="Initialization"
Section="Device Initialization by ROM code"
Sub-Section="Memory Booting"
Heading="NAND"
Figure="ECC Locations in NAND Spare Areas"
[2] ecc-layout updates in u-boot
http://lists.denx.de/pipermail/u-boot/2013-November/167551.html
[3] u-boot configurations to match above ecc-layout are documented at
https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide
CC: <stable@vger.kernel.org> # 3.13.x+ Reported-by: Enric Balletbo Serra <eballetbo@iseebcn.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Sun, 23 Feb 2014 22:17:08 +0000 (14:17 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Serialize the registration of a new sched_clock in the currently ARM
only generic sched_clock facilty to avoid sched_clock havoc"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Prevent callers from seeing half-updated data
Linus Torvalds [Sun, 23 Feb 2014 22:15:46 +0000 (14:15 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- a bugfix which prevents a divide by 0 panic when the newly introduced
try_msr_calibrate_tsc() fails
- enablement of the Baytrail platform to utilize the newfangled msr
based calibration
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: tsc: Add missing Baytrail frequency to the table
x86, tsc: Fallback to normal calibration if fast MSR calibration fails
Linus Torvalds [Sun, 23 Feb 2014 22:15:08 +0000 (14:15 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Another four fixlets to tame the ARM orion irq chip"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: orion: Fix getting generic chip pointer.
irqchip: orion: clear stale interrupts in irq_startup
irqchip: orion: use handle_edge_irq on bridge irqs
irqchip: orion: clear bridge cause register on init
Linus Torvalds [Sun, 23 Feb 2014 18:40:22 +0000 (10:40 -0800)]
Merge tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for 3.14-rc4
The majority of these are for USB gadget, phy, and musb driver issues.
And there's a few new device ids thrown in for good measure"
* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: need to mask when writting endptflush and endptprime
usb: musb: correct use of schedule_delayed_work()
usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
usb: gadget: fix NULL pointer dereference
usb: gadget: printer: using gadget_is_otg to check otg support at runtime
phy: let phy_provider_register be the last step in registering PHY
phy-core: Don't allow building phy-core as a module
phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
phy-core: phy_get: Leave error logging to the caller
phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
usb: musb: correct use of schedule_delayed_work()
usb: musb: do not sleep in atomic context
USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
USB: EHCI: add delay during suspend to prevent erroneous wakeups
usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
usb: musb: do not sleep in atomic context
usb: gadget: s3c2410_udc: Fix build error
usb: musb: core: Fix remote-wakeup resume
usb: musb: host: Fix SuperSpeed hub enumeration
usb: musb: fix obex in g_nokia.ko causing kernel panic
Linus Torvalds [Sun, 23 Feb 2014 18:38:51 +0000 (10:38 -0800)]
Merge tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single commit, to fix a reported problem in the mei driver"
* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: set client's read_cb to NULL when flow control fails
This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect. Either way, this needs
to be reverted until it is all figured out.
Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Ray Strode <halfline@gmail.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Werner Fink <werner@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 22 Feb 2014 20:12:50 +0000 (12:12 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets: a fair number of them resulting from the new
SCHED_DEADLINE code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Remove useless dl_nr_total
sched/deadline: Test for CPU's presence explicitly
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
sched: Fix information leak in sys_sched_getattr()
sched,numa: add cond_resched to task_numa_work
sched/core: Make dl_b->lock IRQ safe
sched/core: Fix sched_rt_global_validate
sched/deadline: Fix overflow to handle period==0 and deadline!=0
sched/deadline: Fix bad accounting of nr_running
Linus Torvalds [Sat, 22 Feb 2014 16:26:01 +0000 (08:26 -0800)]
Merge branch 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"This is the first pull request I've had to do for you, so I'm still
sorting things out. The reason I'm sending this and not Ben should be
obvious from the first commit below - SGI has stepped down from the
XFS maintainership role. As such, I'd like to take another
opportunity to thank them for their many years of effort maintaining
XFS and supporting the XFS community that they developed from the
ground up.
So I haven't had time to work things like signed tags into my
workflows yet, so this is just a repo branch I'm asking you to pull
from. And yes, I named the branch -rc4 because I wanted the fixes in
rc4, not because the branch was for merging into -rc3. Probably not
right, either.
Anyway, I should have everything sorted out by the time the next merge
window comes around. If there's anything that you don't like in the
pull req, feel free to flame me unmercifully.
The changes are fixes for recent regressions and important thinkos in
verification code:
- a log vector buffer alignment issue on ia32
- timestamps on truncate got mangled
- primary superblock CRC validation fixes and error message
sanitisation"
* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: limit superblock corruption errors to actual corruption
xfs: skip verification on initial "guess" superblock read
MAINTAINERS: SGI no longer maintaining XFS
xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
xfs: ensure correct log item buffer alignment
xfs: ensure correct timestamp updates from truncate
regulator: max14577: Fix invalid return value on DT parse success
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.
Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
Jan Kara [Fri, 21 Feb 2014 10:19:04 +0000 (11:19 +0100)]
Revert "writeback: do not sync data dirtied after sync start"
This reverts commit c4a391b53a72d2df4ee97f96f78c1d5971b47489. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.
CC: stable@vger.kernel.org # >= 3.13 Signed-off-by: Jan Kara <jack@suse.cz>
Linus Torvalds [Fri, 21 Feb 2014 22:35:05 +0000 (14:35 -0800)]
Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linux
Pull devicetree fixes from Grant Likely:
"Device tree compatible match order bug fix
This branch contains a bug fix for the way devicetree code identifies
the type of device. Device drivers can contain a list of
of_device_ids, but it more than one entry will match, then the device
driver may choose the wrong one. Commit 105353145e, "match each node
compatible against all given matches first", was queued for v3.14 but
ended up causing other bugs. Commit 06b29e76a7 attempted to fix it
but it had other bugs. Merely reverting the fix and waiting until
v3.15 isn't a good option because there is code in v3.14 that depends
on the revised behaviour to boot.
This branch should finally fixes the problem correctly. This time
instead of just hoping that the patch is correct, this branch also
adds new testcases that validate the behaviour.
The changes in this branch are larger than I would like for a -rc
pull, but moving the test case data out of out of arch/arm so that it
could be validated on other architectures was important"
* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
of: Add self test for of_match_node()
of: Move testcase FDT data into drivers/of
of: reimplement the matching method for __of_match_node()
Revert "of: search the best compatible match first in __of_match_node()"
Andrew Lunn [Thu, 6 Feb 2014 23:41:58 +0000 (00:41 +0100)]
irqchip: orion: Fix getting generic chip pointer.
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs") Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Peter Zijlstra [Mon, 3 Feb 2014 13:29:03 +0000 (14:29 +0100)]
perf/x86: Correctly use FEATURE_PDCM
The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.
This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.
Cc: pbonzini@redhat.com Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Markus Metzger [Sat, 15 Feb 2014 00:44:08 +0000 (16:44 -0800)]
perf, nmi: Fix unknown NMI warning
When using BTS on Core i7-4*, I get the below kernel warning.
$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317920] Do you have a strange power saving mode enabled?
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
kernel:[ 438.317945] Dazed and confused, but trying to continue
Make intel_pmu_handle_irq() take the full exit path when returning early.
Cc: eranian@google.com Cc: peterz@infradead.org Cc: mingo@kernel.org Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Matthieu CASTET [Wed, 19 Feb 2014 05:46:31 +0000 (13:46 +0800)]
usb: chipidea: need to mask when writting endptflush and endptprime
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Arve Hjønnevåg [Mon, 17 Feb 2014 21:58:29 +0000 (13:58 -0800)]
staging: binder: Fix death notifications
The change (008fa749e0fe5b2fffd20b7fe4891bb80d072c6a) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.
Cc: Colin Cross <ccross@android.com> Cc: Android Kernel Team <kernel-team@android.com> Cc: stable <stable@vger.kernel.org> # 3.10 Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Ostrovsky [Mon, 17 Feb 2014 14:12:33 +0000 (09:12 -0500)]
sched/deadline: Test for CPU's presence explicitly
A hot-removed CPU may have ID that is numerically larger than the number of
existing CPUs in the system (e.g. we can unplug CPU 4 from a system that
has CPUs 0, 1 and 4).
Thus the WARN_ONs should check whether the CPU in question is currently
present, not whether its ID value is less than num_present_cpus().
Cc: Ingo Molnar <mingo@kernel.org> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392646353-1874-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Peter Zijlstra [Fri, 14 Feb 2014 16:19:29 +0000 (17:19 +0100)]
sched: Add 'flags' argument to sched_{set,get}attr() syscalls
Because of a recent syscall design debate; its deemed appropriate for
each syscall to have a flags argument for future extension; without
immediately requiring new syscalls.
Vegard Nossum [Sun, 16 Feb 2014 21:24:17 +0000 (22:24 +0100)]
sched: Fix information leak in sys_sched_getattr()
We're copying the on-stack structure to userspace, but forgot to give
the right number of bytes to copy. This allows the calling process to
obtain up to PAGE_SIZE bytes from the stack (and possibly adjacent
kernel memory).
This fix copies only as much as we actually have on the stack
(attr->size defaults to the size of the struct) and leaves the rest of
the userspace-provided buffer untouched.
Found using kmemcheck + trinity.
Fixes: d50dde5a10f30 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI") Cc: Dario Faggioli <raistlin@linux.it> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392585857-10725-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rik van Riel [Tue, 18 Feb 2014 22:12:44 +0000 (17:12 -0500)]
sched,numa: add cond_resched to task_numa_work
Normally task_numa_work scans over a fairly small amount of memory,
but it is possible to run into a large unpopulated part of virtual
memory, with no pages mapped. In that case, task_numa_work can run
for a while, and it may make sense to reschedule as required.
Cc: akpm@linux-foundation.org Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Rik van Riel <riel@redhat.com> Reported-by: Xing Gang <gang.xing@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392761566-24834-2-git-send-email-riel@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Juri Lelli [Tue, 11 Feb 2014 08:24:27 +0000 (09:24 +0100)]
sched/core: Make dl_b->lock IRQ safe
Fix this lockdep warning:
[ 44.804600] =========================================================
[ 44.805746] [ INFO: possible irq lock inversion dependency detected ]
[ 44.805746] 3.14.0-rc2-test+ #14 Not tainted
[ 44.805746] ---------------------------------------------------------
[ 44.805746] bash/3674 just changed the state of lock:
[ 44.805746] (&dl_b->lock){+.....}, at: [<ffffffff8106ad15>] sched_rt_handler+0x132/0x248
[ 44.805746] but this lock was taken by another, HARDIRQ-safe lock in the past:
[ 44.805746] (&rq->lock){-.-.-.}
and interrupts could create inverse lock ordering between them.
[ 44.805746]
[ 44.805746] other info that might help us debug this:
[ 44.805746] Possible interrupt unsafe locking scenario:
[ 44.805746]
[ 44.805746] CPU0 CPU1
[ 44.805746] ---- ----
[ 44.805746] lock(&dl_b->lock);
[ 44.805746] local_irq_disable();
[ 44.805746] lock(&rq->lock);
[ 44.805746] lock(&dl_b->lock);
[ 44.805746] <Interrupt>
[ 44.805746] lock(&rq->lock);
Juri Lelli [Tue, 11 Feb 2014 08:24:26 +0000 (09:24 +0100)]
sched/core: Fix sched_rt_global_validate
Don't compare sysctl_sched_rt_runtime against sysctl_sched_rt_period if
the former is equal to RUNTIME_INF, otherwise disabling -rt bandwidth
management (with CONFIG_RT_GROUP_SCHED=n) fails.
Steven Rostedt [Wed, 19 Feb 2014 18:53:35 +0000 (13:53 -0500)]
sched/deadline: Fix overflow to handle period==0 and deadline!=0
While debugging the crash with the bad nr_running accounting, I hit
another bug where, after running my sched deadline test, I was getting
failures to take a CPU offline. It was giving me a -EBUSY error.
Adding a bunch of trace_printk()s around, I found that the cpu
notifier that called sched_cpu_inactive() was returning a failure. The
overflow value was coming up negative?
Talking this over with Juri, the problem is that the total_bw update was
suppose to be made by dl_overflow() which, during my tests, seemed to
not be called. Adding more trace_printk()s, it wasn't that it wasn't
called, but it exited out right away with the check of new_bw being
equal to p->dl.dl_bw. The new_bw calculates the ratio between period and
runtime. The bug is that if you set a deadline, you do not need to set
a period if you plan on the period being equal to the deadline. That
is, if period is zero and deadline is not, then the system call should
set the period to be equal to the deadline. This is done elsewhere in
the code.
The fix is easy, check if period is set, and if it is not, then use the
deadline.
Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140219135335.7e74abd4@gandalf.local.home Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Juri Lelli [Thu, 20 Feb 2014 08:19:39 +0000 (09:19 +0100)]
sched/deadline: Fix bad accounting of nr_running
Rostedt writes:
My test suite was locking up hard when enabling mmiotracer. This was due
to the mmiotracer placing all but one CPU offline. I found this out
when I was able to reproduce the bug with just my stress-cpu-hotplug
test. This bug baffled me because it would not always trigger, and
would only trigger on the first run after boot up. The
stress-cpu-hotplug test would crash hard the first run, or never crash
at all. But a new reboot may cause it to crash on the first run again.
I spent all week bisecting this, as I couldn't find a consistent
reproducer. I finally narrowed it down to the sched deadline patches,
and even more peculiar, to the commit that added the sched
deadline boot up self test to the latency tracer. Then it dawned on me
to what the bug was.
All it took was to run a task under sched deadline to screw up the CPU
hot plugging. This explained why it would lock up only on the first run
of the stress-cpu-hotplug test. The bug happened when the boot up self
test of the schedule latency tracer would test a deadline task. The
deadline task would corrupt something that would cause CPU hotplug to
fail. If it didn't corrupt it, the stress test would always work
(there's no other sched deadline tasks that would run to cause
problems). If it did corrupt on boot up, the first test would lockup
hard.
I proved this theory by running my deadline test program on another box,
and then run the stress-cpu-hotplug test, and it would now consistently
lock up. I could run stress-cpu-hotplug over and over with no problem,
but once I ran the deadline test, the next run of the
stress-cpu-hotplug would lock hard.
After adding lots of tracing to the code, I found the cause. The
function tracer showed that migrate_tasks() was stuck in an infinite
loop, where rq->nr_running never equaled 1 to break out of it. When I
added a trace_printk() to see what that number was, it was 335 and
never decrementing!
if (dl_runtime_exceeded(rq, dl_se)) {
__dequeue_task_dl(rq, curr, 0);
if (likely(start_dl_timer(dl_se, curr->dl.dl_boosted)))
dl_se->dl_throttled = 1;
else
enqueue_task_dl(rq, curr, ENQUEUE_REPLENISH);
if (!is_leftmost(curr, &rq->dl))
resched_task(curr);
}
Notice how we call __dequeue_task_dl() and in the else case we
call enqueue_task_dl()? Also notice that dequeue_task_dl() has
underscores where enqueue_task_dl() does not. The enqueue_task_dl()
calls inc_nr_running(rq), but __dequeue_task_dl() does not. This is
where we get nr_running out of sync.
[snip]
Another point where nr_running can get out of sync is when the dl_timer
fires:
dl_se->dl_throttled = 0;
if (p->on_rq) {
enqueue_task_dl(rq, p, ENQUEUE_REPLENISH);
if (task_has_dl_policy(rq->curr))
check_preempt_curr_dl(rq, p, 0);
else
resched_task(rq->curr);
This patch does two things:
- correctly accounts for throttled tasks (that are now considered
!running);
- fixes the bug, updating nr_running from {inc,dec}_dl_tasks(),
since we risk to update it twice in some situations (e.g., a
task is dequeued while it has exceeded its budget).
Cc: mingo@redhat.com Cc: torvalds@linux-foundation.org Cc: akpm@linux-foundation.org Reported-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Juri Lelli <juri.lelli@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1392884379-13744-1-git-send-email-juri.lelli@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull sparc fixes from David Miller:
"Three minor fixes from David Howells and Paul Gortmaker"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2]
sparc32: make copy_to/from_user_page() usable from modular code
sparc32: fix build failure for arch_jump_label_transform
Linus Torvalds [Fri, 21 Feb 2014 18:01:17 +0000 (10:01 -0800)]
Merge tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These include two fixes for recent regressions related to ACPI, a
cpufreq fix for breakage overlooked by a previous fix commit, two
intel_pstate fixes for stuff added during the 3.13 cycle that need to
go into -stable, three fixes for older bugs that also are -stable
candidates, ACPI video blacklist changes related to BIOSes that behave
in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
unset in ACPI drivers and an ACPI driver cleanup.
Specifics:
- Fix for a recent probing regression in the nouveau driver
introduced by an ACPI change related to the handling of _DSM from
Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working
correctly after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh
Kumar.
- Two intel_pstate fixes related to Baytrail support added during the
3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should use
the native backlight interface instead of the ACPI one from the
general ACPI _OSI blacklist the the ACPI video driver's blacklist
where they belong. This consists of an ACPI video driver update
from Aaron Lu and a revert of a previous commit adding systems to
the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F"
* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
ACPI / nouveau: fix probing regression related to _DSM
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
ACPI / dock: Make 'docked' sysfs attribute work as documented
ACPI / SBS: Fix incorrect sscanf() string
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
Linus Torvalds [Fri, 21 Feb 2014 17:59:46 +0000 (09:59 -0800)]
Merge tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"The fixes are only for the ARM-SMMU driver. Here is the summary from
Will Deacon:
- Andreas Herrmann took the driver for a run with a real SATA
controller, which caused the new mutex-based locking to explode
since we require mappings in atomic context
- Yifan fixed an issue with the page table creation, which then
caused breakages with the way in which we flush descriptors out to
the table walker
- I ran the driver on a system where the SMMU is hooked into a
coherent interconnect for table walks, and noticed a shareability
mismatch between the CPU and the SMMU
These issues are all fixed here and have been tested on both arm and
arm64 based systems.
Besides that I put a fix on-top to make the spinlock irq-safe, so that
the code-paths can be used in the DMA-API"
* tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm/smmu: Use irqsafe spinlock for domain lock
iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA
iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
iommu/arm-smmu: fix table flushing during initial allocations
iommu/arm-smmu: really fix page table locking
iommu/arm-smmu: fix pud/pmd entry fill sequence
Linus Torvalds [Fri, 21 Feb 2014 17:55:32 +0000 (09:55 -0800)]
Merge tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This time we got a slightly higher volume than previous times, but all
device-specific good fixes. Noticeable changes are fixes in davinci,
and the removal of open-codes in HD-audio ca0132 driver. The rest are
all small fixes and/or quirks"
* tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Enable front audio jacks on one HP desktop model
ALSA: hda/ca0132 - Fix recording from mode id 0x8
ALSA: hda/ca0132 - setup/cleanup streams
ALSA: hda - add headset mic detect quirks for two Dell laptops
ALSA: usb-audio: work around KEF X300A firmware bug
ASoC: max98090: make REVISION_ID readable
ASoC: txx9aclc_ac97: Fix kernel crash on probe
ASoC: max98090: sync regcache on entering STANDBY
ASoC: blackfin: Fix machine driver Kconfig dependencies
ASoC: da9055: Fix device registration of PMIC and CODEC devices
ASoC: fsl-esai: fix ESAI TDM slot setting
ASoC: fsl: fix pm support of machine drivers
ASoC: rt5640: Add ACPI ID for Intel Baytrail
ASoC: davinci-evm: Add pm callbacks to platform driver
ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver
ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously
ASoC: davinci-mcasp: Harmonize the sub hw_params function names
ASoC: samsung: Fix trivial typo
ASoC: samsung: Remove invalid dependencies
ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data
projects / ~andy / linux / log