From: Nishanth Menon Date: Mon, 1 Apr 2013 16:04:34 +0000 (-0400) Subject: staging: ti-soc-thermal: remove kernel-doc warnings reported with -v X-Git-Tag: v3.10-rc1~192^2~370 X-Git-Url: http://pileus.org/git/?p=~andy%2Flinux;a=commitdiff_plain;h=169e8d03f02d98e7d02afca275dfbc1c834ed360 staging: ti-soc-thermal: remove kernel-doc warnings reported with -v Fix all kernel-doc warnings by add documentation about returns. Signed-off-by: Nishanth Menon Signed-off-by: Eduardo Valentin Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c index a6aa75f6302..62ffea1edf8 100644 --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c @@ -50,7 +50,7 @@ * @reg: desired register (offset) to be read * * Helper function to read bandgap registers. It uses the io remapped area. - * Returns the register value. + * Return: the register value. */ static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg) { @@ -97,6 +97,8 @@ do { \ * * Used to power on/off a bandgap device instance. Only used on those * that features tempsoff bit. + * + * Return: 0 on success, -ENOTSUPP if tempsoff is not supported. */ static int ti_bandgap_power(struct ti_bandgap *bgp, bool on) { @@ -124,6 +126,8 @@ exit: * This function is desired because, depending on bandgap device version, * it might be needed to freeze the bandgap state machine, before fetching * the register value. + * + * Return: temperature in ADC values. */ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) { @@ -164,6 +168,8 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id) * conditions and acts accordingly. In case there are events pending, * it will reset the event mask to wait for the opposite event (next event). * Every time there is a new event, it will be reported to thermal layer. + * + * Return: IRQ_HANDLED */ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data) { @@ -224,6 +230,8 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data) * This is the Tshut handler. Use it only if bandgap device features * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown * the system. + * + * Return: IRQ_HANDLED */ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data) { @@ -246,6 +254,9 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data) * Simple conversion from ADC representation to mCelsius. In case the ADC value * is out of the ADC conv table range, it returns -ERANGE, 0 on success. * The conversion table is indexed by the ADC values. + * + * Return: 0 if conversion was successful, else -ERANGE in case the @adc_val + * argument is out of the ADC conv table range. */ static int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t) @@ -274,6 +285,9 @@ exit: * Simple conversion from mCelsius to ADC values. In case the temp value * is out of the ADC conv table range, it returns -ERANGE, 0 on success. * The conversion table is indexed by the ADC values. + * + * Return: 0 if conversion was successful, else -ERANGE in case the @temp + * argument is out of the ADC conv table range. */ static int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc) @@ -313,7 +327,8 @@ exit: * @sum: address where to write the resulting temperature (in ADC scale) * * Adds an hysteresis value (in mCelsius) to a ADC temperature value. - * Returns 0 on success, -ERANGE otherwise. + * + * Return: 0 on success, -ERANGE otherwise. */ static int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val, @@ -386,6 +401,8 @@ static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id, * It checks the resulting t_hot and t_cold values, based on the new passed @val * and configures the thresholds so that t_hot is always greater than t_cold. * Call this function only if bandgap features HAS(TALERT). + * + * Return: 0 if no error, else corresponding error */ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id, int val, bool hot) @@ -444,6 +461,9 @@ exit: * * Checks if the bandgap pointer is valid and if the sensor id is also * applicable. + * + * Return: 0 if no errors, -EINVAL for invalid @bgp pointer or -ERANGE if + * @id cannot index @bgp sensors. */ static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id) { @@ -477,6 +497,8 @@ exit: * This function can be used to update t_hot or t_cold, depending on @hot value. * Validates the mCelsius range and update the requested threshold. * Call this function only if bandgap features HAS(TALERT). + * + * Return: 0 if no error, else corresponding error value. */ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val, bool hot) @@ -531,6 +553,9 @@ exit: * It will fetch the required thresholds (hot and cold) for TALERT signal. * This function can be used to read t_hot or t_cold, depending on @hot value. * Call this function only if bandgap features HAS(TALERT). + * + * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the + * corresponding error value if some operation fails. */ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id, int *val, bool hot) @@ -577,7 +602,7 @@ exit: * @id: sensor id * @thot: resulting current thot value * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot) { @@ -590,7 +615,7 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot) * @id: sensor id * @val: desired thot value * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val) { @@ -603,7 +628,7 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val) * @id: sensor id * @tcold: resulting current tcold value * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold) { @@ -616,7 +641,7 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold) * @id: sensor id * @val: desired tcold value * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val) { @@ -629,7 +654,7 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val) * @id: sensor id * @interval: resulting update interval in miliseconds * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, int *interval) @@ -661,7 +686,7 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id, * @id: sensor id * @interval: desired update interval in miliseconds * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id, u32 interval) @@ -687,7 +712,7 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, * @id: sensor id * @temperature: resulting temperature * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, int *temperature) @@ -719,7 +744,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id, * @id: sensor id * @data: thermal framework related data to be stored * - * returns 0 on success or the proper error code + * Return: 0 on success or the proper error code */ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data) { @@ -738,7 +763,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data) * @bgp: pointer to bandgap instance * @id: sensor id * - * returns data stored by set function with sensor id on success or NULL + * Return: data stored by set function with sensor id on success or NULL */ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id) { @@ -758,6 +783,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id) * * Used to initialize the conversion state machine and set it to a valid * state. Called during device initialization and context restore events. + * + * Return: 0 */ static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) @@ -791,6 +818,8 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id) * be used for junction temperature monitoring, it is desirable that the * sensors are operational all the time, so that alerts are generated * properly. + * + * Return: 0 */ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp) { @@ -816,6 +845,8 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp) * to specify which GPIO line is used. TSHUT IRQ is fired anytime * one of the bandgap sensors violates the TSHUT high/hot threshold. * And in that case, the system must go off. + * + * Return: 0 if no error, else error status */ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp, struct platform_device *pdev) @@ -855,6 +886,8 @@ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp, * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold) * are violated. In these situation, the driver must reprogram the thresholds, * accordingly to specified policy. + * + * Return: 0 if no error, else return corresponding error. */ static int ti_bandgap_talert_init(struct ti_bandgap *bgp, struct platform_device *pdev) @@ -886,6 +919,9 @@ static const struct of_device_id of_ti_bandgap_match[]; * Used to read the device tree properties accordingly to the bandgap * matching version. Based on bandgap version and its capabilities it * will build a struct ti_bandgap out of the required DT entries. + * + * Return: valid bandgap structure if successful, else returns ERR_PTR + * return value must be verified with IS_ERR. */ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev) {