return "";
}
-/* gets the regulator for a given consumer device */
-static struct regulator *get_device_regulator(struct device *dev)
-{
- struct regulator *regulator = NULL;
- struct regulator_dev *rdev;
-
- mutex_lock(®ulator_list_mutex);
- list_for_each_entry(rdev, ®ulator_list, list) {
- mutex_lock(&rdev->mutex);
- list_for_each_entry(regulator, &rdev->consumer_list, list) {
- if (regulator->dev == dev) {
- mutex_unlock(&rdev->mutex);
- mutex_unlock(®ulator_list_mutex);
- return regulator;
- }
- }
- mutex_unlock(&rdev->mutex);
- }
- mutex_unlock(®ulator_list_mutex);
- return NULL;
-}
-
/**
* of_get_regulator - get a regulator device node based on supply name
* @dev: Device pointer for the consumer (of regulator) device
return 0;
}
-static ssize_t device_requested_uA_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct regulator *regulator;
-
- regulator = get_device_regulator(dev);
- if (regulator == NULL)
- return 0;
-
- return sprintf(buf, "%d\n", regulator->uA_load);
-}
-
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
case REGULATOR_STATUS_STANDBY:
label = "standby";
break;
+ case REGULATOR_STATUS_UNDEFINED:
+ label = "undefined";
+ break;
default:
return -ERANGE;
}
list_add(®ulator->list, &rdev->consumer_list);
if (dev) {
- /* create a 'requested_microamps_name' sysfs entry */
- size = scnprintf(buf, REG_STR_SIZE,
- "microamps_requested_%s-%s",
- dev_name(dev), supply_name);
- if (size >= REG_STR_SIZE)
- goto overflow_err;
-
regulator->dev = dev;
- sysfs_attr_init(®ulator->dev_attr.attr);
- regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
- if (regulator->dev_attr.attr.name == NULL)
- goto attr_name_err;
-
- regulator->dev_attr.attr.mode = 0444;
- regulator->dev_attr.show = device_requested_uA_show;
- err = device_create_file(dev, ®ulator->dev_attr);
- if (err < 0) {
- rdev_warn(rdev, "could not add regulator_dev requested microamps sysfs entry\n");
- goto attr_name_err;
- }
- /* also add a link to the device sysfs entry */
+ /* Add a link to the device sysfs entry */
size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
dev->kobj.name, supply_name);
if (size >= REG_STR_SIZE)
- goto attr_err;
+ goto overflow_err;
regulator->supply_name = kstrdup(buf, GFP_KERNEL);
if (regulator->supply_name == NULL)
- goto attr_err;
+ goto overflow_err;
err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
buf);
if (err) {
rdev_warn(rdev, "could not add device link %s err %d\n",
dev->kobj.name, err);
- goto link_name_err;
+ /* non-fatal */
}
} else {
regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
if (regulator->supply_name == NULL)
- goto attr_err;
+ goto overflow_err;
}
regulator->debugfs = debugfs_create_dir(regulator->supply_name,
mutex_unlock(&rdev->mutex);
return regulator;
-link_name_err:
- kfree(regulator->supply_name);
-attr_err:
- device_remove_file(regulator->dev, ®ulator->dev_attr);
-attr_name_err:
- kfree(regulator->dev_attr.attr.name);
overflow_err:
list_del(®ulator->list);
kfree(regulator);
debugfs_remove_recursive(regulator->debugfs);
/* remove any sysfs entries */
- if (regulator->dev) {
+ if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
- device_remove_file(regulator->dev, ®ulator->dev_attr);
- kfree(regulator->dev_attr.attr.name);
- }
kfree(regulator->supply_name);
list_del(®ulator->list);
kfree(regulator);
{
int rc;
- rc = devres_destroy(regulator->dev, devm_regulator_release,
+ rc = devres_release(regulator->dev, devm_regulator_release,
devm_regulator_match, regulator);
- if (rc == 0)
- regulator_put(regulator);
- else
+ if (rc != 0)
WARN_ON(rc);
}
EXPORT_SYMBOL_GPL(devm_regulator_put);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
+/**
+ * regulator_list_voltage_table - List voltages with table based mapping
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with table based mapping between voltages and
+ * selectors can set volt_table in the regulator descriptor
+ * and then use this function as their list_voltage() operation.
+ */
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (!rdev->desc->volt_table) {
+ BUG_ON(!rdev->desc->volt_table);
+ return -EINVAL;
+ }
+
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ return rdev->desc->volt_table[selector];
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
+
/**
* regulator_list_voltage - enumerate supported voltages
* @regulator: regulator source
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
+ struct regulator_dev *rdev = regulator->rdev;
int i, voltages, ret;
+ /* If we can't change voltage check the current voltage */
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ ret = regulator_get_voltage(regulator);
+ if (ret >= 0)
+ return (min_uV >= ret && ret <= max_uV);
+ else
+ return ret;
+ }
+
ret = regulator_count_voltages(regulator);
if (ret < 0)
return ret;
{
int ret;
int delay = 0;
- int best_val;
+ int best_val = 0;
unsigned int selector;
int old_selector = -1;
* If we can't obtain the old selector there is not enough
* info to call set_voltage_time_sel().
*/
- if (rdev->desc->ops->set_voltage_time_sel &&
+ if (_regulator_is_enabled(rdev) &&
+ rdev->desc->ops->set_voltage_time_sel &&
rdev->desc->ops->get_voltage_sel) {
old_selector = rdev->desc->ops->get_voltage_sel(rdev);
if (old_selector < 0)
if (rdev->desc->ops->set_voltage) {
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
&selector);
+
+ if (ret >= 0) {
+ if (rdev->desc->ops->list_voltage)
+ best_val = rdev->desc->ops->list_voltage(rdev,
+ selector);
+ else
+ best_val = _regulator_get_voltage(rdev);
+ }
+
} else if (rdev->desc->ops->set_voltage_sel) {
- if (rdev->desc->ops->map_voltage)
+ if (rdev->desc->ops->map_voltage) {
ret = rdev->desc->ops->map_voltage(rdev, min_uV,
max_uV);
- else
- ret = regulator_map_voltage_iterate(rdev, min_uV,
- max_uV);
+ } else {
+ if (rdev->desc->ops->list_voltage ==
+ regulator_list_voltage_linear)
+ ret = regulator_map_voltage_linear(rdev,
+ min_uV, max_uV);
+ else
+ ret = regulator_map_voltage_iterate(rdev,
+ min_uV, max_uV);
+ }
if (ret >= 0) {
- selector = ret;
- ret = rdev->desc->ops->set_voltage_sel(rdev, ret);
+ best_val = rdev->desc->ops->list_voltage(rdev, ret);
+ if (min_uV <= best_val && max_uV >= best_val) {
+ selector = ret;
+ ret = rdev->desc->ops->set_voltage_sel(rdev,
+ ret);
+ } else {
+ ret = -EINVAL;
+ }
}
} else {
ret = -EINVAL;
}
- if (rdev->desc->ops->list_voltage)
- best_val = rdev->desc->ops->list_voltage(rdev, selector);
- else
- best_val = -1;
-
/* Call set_voltage_time_sel if successfully obtained old_selector */
- if (ret == 0 && old_selector >= 0 &&
+ if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
delay);
delay = 0;
}
- }
- /* Insert any necessary delays */
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
+ /* Insert any necessary delays */
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
}
- if (ret == 0)
+ if (ret == 0 && best_val >= 0)
_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
- NULL);
+ (void *)best_val);
trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
unsigned long event, void *data)
{
/* call rdev chain first */
- blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+ blocking_notifier_call_chain(&rdev->notifier, event, data);
}
/**
return REGULATOR_STATUS_NORMAL;
case REGULATOR_MODE_IDLE:
return REGULATOR_STATUS_IDLE;
- case REGULATOR_STATUS_STANDBY:
+ case REGULATOR_MODE_STANDBY:
return REGULATOR_STATUS_STANDBY;
default:
- return 0;
+ return REGULATOR_STATUS_UNDEFINED;
}
}
EXPORT_SYMBOL_GPL(regulator_mode_to_status);
rdev->reg_data = config->driver_data;
rdev->owner = regulator_desc->owner;
rdev->desc = regulator_desc;
- rdev->regmap = config->regmap;
+ if (config->regmap)
+ rdev->regmap = config->regmap;
+ else
+ rdev->regmap = dev_get_regmap(dev, NULL);
INIT_LIST_HEAD(&rdev->consumer_list);
INIT_LIST_HEAD(&rdev->list);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
projects / ~andy / linux / blobdiff