if (!driver) return NULL;
if (!driver->err_handler ||
- !driver->err_handler->mmio_enabled) {
+ !driver->err_handler->mmio_enabled ||
+ (edev->mode & EEH_DEV_NO_HANDLER)) {
eeh_pcid_put(dev);
return NULL;
}
eeh_enable_irq(dev);
if (!driver->err_handler ||
- !driver->err_handler->slot_reset) {
+ !driver->err_handler->slot_reset ||
+ (edev->mode & EEH_DEV_NO_HANDLER)) {
eeh_pcid_put(dev);
return NULL;
}
eeh_enable_irq(dev);
if (!driver->err_handler ||
- !driver->err_handler->resume) {
+ !driver->err_handler->resume ||
+ (edev->mode & EEH_DEV_NO_HANDLER)) {
+ edev->mode &= ~EEH_DEV_NO_HANDLER;
eeh_pcid_put(dev);
return NULL;
}
edev->mode |= EEH_DEV_DISCONNECTED;
(*removed)++;
+ pci_lock_rescan_remove();
pci_stop_and_remove_bus_device(dev);
+ pci_unlock_rescan_remove();
return NULL;
}
* into pcibios_add_pci_devices().
*/
eeh_pe_state_mark(pe, EEH_PE_KEEP);
- if (bus)
+ if (bus) {
+ pci_lock_rescan_remove();
pcibios_remove_pci_devices(bus);
- else if (frozen_bus)
+ pci_unlock_rescan_remove();
+ } else if (frozen_bus) {
eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
+ }
/* Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
if (rc)
return rc;
+ pci_lock_rescan_remove();
+
/* Restore PE */
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
pe->tstamp = tstamp;
pe->freeze_count = cnt;
+ pci_unlock_rescan_remove();
return 0;
}
/* The longest amount of time to wait for a pci device
* to come back on line, in seconds.
*/
-#define MAX_WAIT_FOR_RECOVERY 150
+#define MAX_WAIT_FOR_RECOVERY 300
static void eeh_handle_normal_event(struct eeh_pe *pe)
{
eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
/* Shut down the device drivers for good. */
- if (frozen_bus)
+ if (frozen_bus) {
+ pci_lock_rescan_remove();
pcibios_remove_pci_devices(frozen_bus);
+ pci_unlock_rescan_remove();
+ }
}
static void eeh_handle_special_event(void)
{
struct eeh_pe *pe, *phb_pe;
struct pci_bus *bus;
- struct pci_controller *hose, *tmp;
+ struct pci_controller *hose;
unsigned long flags;
- int rc = 0;
+ int rc;
- /*
- * The return value from next_error() has been classified as follows.
- * It might be good to enumerate them. However, next_error() is only
- * supported by PowerNV platform for now. So it would be fine to use
- * integer directly:
- *
- * 4 - Dead IOC 3 - Dead PHB
- * 2 - Fenced PHB 1 - Frozen PE
- * 0 - No error found
- *
- */
- rc = eeh_ops->next_error(&pe);
- if (rc <= 0)
- return;
- switch (rc) {
- case 4:
- /* Mark all PHBs in dead state */
- eeh_serialize_lock(&flags);
- list_for_each_entry_safe(hose, tmp,
- &hose_list, list_node) {
- phb_pe = eeh_phb_pe_get(hose);
- if (!phb_pe) continue;
-
- eeh_pe_state_mark(phb_pe,
- EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+ do {
+ rc = eeh_ops->next_error(&pe);
+
+ switch (rc) {
+ case EEH_NEXT_ERR_DEAD_IOC:
+ /* Mark all PHBs in dead state */
+ eeh_serialize_lock(&flags);
+
+ /* Purge all events */
+ eeh_remove_event(NULL);
+
+ list_for_each_entry(hose, &hose_list, list_node) {
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe) continue;
+
+ eeh_pe_state_mark(phb_pe,
+ EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+ }
+
+ eeh_serialize_unlock(flags);
+
+ break;
+ case EEH_NEXT_ERR_FROZEN_PE:
+ case EEH_NEXT_ERR_FENCED_PHB:
+ case EEH_NEXT_ERR_DEAD_PHB:
+ /* Mark the PE in fenced state */
+ eeh_serialize_lock(&flags);
+
+ /* Purge all events of the PHB */
+ eeh_remove_event(pe);
+
+ if (rc == EEH_NEXT_ERR_DEAD_PHB)
+ eeh_pe_state_mark(pe,
+ EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
+ else
+ eeh_pe_state_mark(pe,
+ EEH_PE_ISOLATED | EEH_PE_RECOVERING);
+
+ eeh_serialize_unlock(flags);
+
+ break;
+ case EEH_NEXT_ERR_NONE:
+ return;
+ default:
+ pr_warn("%s: Invalid value %d from next_error()\n",
+ __func__, rc);
+ return;
}
- eeh_serialize_unlock(flags);
-
- /* Purge all events */
- eeh_remove_event(NULL);
- break;
- case 3:
- case 2:
- case 1:
- /* Mark the PE in fenced state */
- eeh_serialize_lock(&flags);
- if (rc == 3)
- eeh_pe_state_mark(pe,
- EEH_PE_ISOLATED | EEH_PE_PHB_DEAD);
- else
- eeh_pe_state_mark(pe,
- EEH_PE_ISOLATED | EEH_PE_RECOVERING);
- eeh_serialize_unlock(flags);
-
- /* Purge all events of the PHB */
- eeh_remove_event(pe);
- break;
- default:
- pr_err("%s: Invalid value %d from next_error()\n",
- __func__, rc);
- return;
- }
- /*
- * For fenced PHB and frozen PE, it's handled as normal
- * event. We have to remove the affected PHBs for dead
- * PHB and IOC
- */
- if (rc == 2 || rc == 1)
- eeh_handle_normal_event(pe);
- else {
- list_for_each_entry_safe(hose, tmp,
- &hose_list, list_node) {
- phb_pe = eeh_phb_pe_get(hose);
- if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD))
- continue;
-
- bus = eeh_pe_bus_get(phb_pe);
- /* Notify all devices that they're about to go down. */
- eeh_pe_dev_traverse(pe, eeh_report_failure, NULL);
- pcibios_remove_pci_devices(bus);
+ /*
+ * For fenced PHB and frozen PE, it's handled as normal
+ * event. We have to remove the affected PHBs for dead
+ * PHB and IOC
+ */
+ if (rc == EEH_NEXT_ERR_FROZEN_PE ||
+ rc == EEH_NEXT_ERR_FENCED_PHB) {
+ eeh_handle_normal_event(pe);
+ } else {
+ pci_lock_rescan_remove();
+ list_for_each_entry(hose, &hose_list, list_node) {
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe ||
+ !(phb_pe->state & EEH_PE_PHB_DEAD))
+ continue;
+
+ /* Notify all devices to be down */
+ bus = eeh_pe_bus_get(phb_pe);
+ eeh_pe_dev_traverse(pe,
+ eeh_report_failure, NULL);
+ pcibios_remove_pci_devices(bus);
+ }
+ pci_unlock_rescan_remove();
}
- }
+
+ /*
+ * If we have detected dead IOC, we needn't proceed
+ * any more since all PHBs would have been removed
+ */
+ if (rc == EEH_NEXT_ERR_DEAD_IOC)
+ break;
+ } while (rc != EEH_NEXT_ERR_NONE);
}
/**
projects / ~andy / linux / blobdiff