#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DAWR 0xB4
+#define SPRN_CIABR 0xBB
+#define CIABR_PRIV 0x3
+#define CIABR_PRIV_USER 1
+#define CIABR_PRIV_SUPER 2
+#define CIABR_PRIV_HYPER 3
#define SPRN_DAWRX 0xBC
-#define DAWRX_USER (1UL << 0)
-#define DAWRX_KERNEL (1UL << 1)
-#define DAWRX_HYP (1UL << 2)
+#define DAWRX_USER __MASK(0)
+#define DAWRX_KERNEL __MASK(1)
+#define DAWRX_HYP __MASK(2)
+#define DAWRX_WTI __MASK(3)
+#define DAWRX_WT __MASK(4)
+#define DAWRX_DR __MASK(5)
+#define DAWRX_DW __MASK(6)
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define SPRN_DABR2 0x13D /* e300 */
#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
-#define DABRX_USER (1UL << 0)
-#define DABRX_KERNEL (1UL << 1)
-#define DABRX_HYP (1UL << 2)
-#define DABRX_BTI (1UL << 3)
+#define DABRX_USER __MASK(0)
+#define DABRX_KERNEL __MASK(1)
+#define DABRX_HYP __MASK(2)
+#define DABRX_BTI __MASK(3)
#define DABRX_ALL (DABRX_BTI | DABRX_HYP | DABRX_KERNEL | DABRX_USER)
#define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */
#define SPRN_HRMOR 0x139 /* Real mode offset register */
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
+#define SPRN_IC 0x350 /* Virtual Instruction Count */
+#define SPRN_VTB 0x351 /* Virtual Time Base */
/* HFSCR and FSCR bit numbers are the same */
#define FSCR_TAR_LG 8 /* Enable Target Address Register */
#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
#define LPCR_RMLS 0x1C000000 /* impl dependent rmo limit sel */
#define LPCR_RMLS_SH (63-37)
#define LPCR_ILE 0x02000000 /* !HV irqs set MSR:LE */
+#define LPCR_AIL 0x01800000 /* Alternate interrupt location */
#define LPCR_AIL_0 0x00000000 /* MMU off exception offset 0x0 */
#define LPCR_AIL_3 0x01800000 /* MMU on exception offset 0xc00...4xxx */
-#define LPCR_PECE 0x00007000 /* powersave exit cause enable */
+#define LPCR_ONL 0x00040000 /* online - PURR/SPURR count */
+#define LPCR_PECE 0x0001f000 /* powersave exit cause enable */
+#define LPCR_PECEDP 0x00010000 /* directed priv dbells cause exit */
+#define LPCR_PECEDH 0x00008000 /* directed hyp dbells cause exit */
#define LPCR_PECE0 0x00004000 /* ext. exceptions can cause exit */
#define LPCR_PECE1 0x00002000 /* decrementer can cause exit */
#define LPCR_PECE2 0x00001000 /* machine check etc can cause exit */
#define SPRN_PCR 0x152 /* Processor compatibility register */
#define PCR_VEC_DIS (1ul << (63-0)) /* Vec. disable (bit NA since POWER8) */
#define PCR_VSX_DIS (1ul << (63-1)) /* VSX disable (bit NA since POWER8) */
+#define PCR_TM_DIS (1ul << (63-2)) /* Trans. memory disable (POWER8) */
+#define PCR_ARCH_206 0x4 /* Architecture 2.06 */
#define PCR_ARCH_205 0x2 /* Architecture 2.05 */
#define SPRN_HEIR 0x153 /* Hypervisor Emulated Instruction Register */
#define SPRN_TLBINDEXR 0x154 /* P7 TLB control register */
#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_DHDES 0x0B1 /* Directed Hyp. Doorbell Exc. State */
+#define SPRN_DPDES 0x0B0 /* Directed Priv. Doorbell Exc. State */
#define SPRN_EAR 0x11A /* External Address Register */
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#define SPRN_IABR2 0x3FA /* 83xx */
#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
+#define SPRN_IAMR 0x03D /* Instr. Authority Mask Reg */
#define SPRN_HID4 0x3F4 /* 970 HID4 */
#define HID4_LPES0 (1ul << (63-0)) /* LPAR env. sel. bit 0 */
#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#endif
#define SPRN_TIR 0x1BE /* Thread Identification Register */
+#define SPRN_PSPB 0x09F /* Problem State Priority Boost reg */
#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */
#define SPRN_EBBHR 804 /* Event based branch handler register */
#define SPRN_EBBRR 805 /* Event based branch return register */
#define SPRN_BESCR 806 /* Branch event status and control register */
+#define SPRN_WORT 895 /* Workload optimization register - thread */
#define SPRN_PMC1 787
#define SPRN_PMC2 788
#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
+#define SPRN_TACR 888
+#define SPRN_TCSCR 889
+#define SPRN_CSIGR 890
+#define SPRN_SPMC1 892
+#define SPRN_SPMC2 893
/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */
#define MMCR0_USER_MASK (MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO)
projects / ~andy / linux / blobdiff