select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
select BUILDTIME_EXTABLE_SORT if MMU
select CLONE_BACKWARDS
select CPU_PM if (SUSPEND || CPU_IDLE)
- select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
+ select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_IDLE_POLL_SETUP
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select IRQ_FORCED_THREADING
select KTIME_SCALAR
select MODULES_USE_ELF_REL
+ select NO_BOOTMEM
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PERF_USE_VMALLOC
bool "ARM Ltd. Integrator family"
select ARCH_HAS_CPUFREQ
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
select COMMON_CLK
select COMMON_CLK_VERSATILE
select GENERIC_CLOCKEVENTS
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on !MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_NVIC
+ # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
+ # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_DMA
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM
+config ARCH_MSM_NODT
bool "Qualcomm MSM"
+ select ARCH_MSM
select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF if OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
help
stack and controls some vital subsystems
(clock and power control, etc).
-config ARCH_SHMOBILE
- bool "Renesas SH-Mobile / R-Mobile"
+config ARCH_SHMOBILE_LEGACY
+ bool "Renesas ARM SoCs (non-multiplatform)"
+ select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
- Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
+ Support for Renesas ARM SoC platforms using a non-multiplatform
+ kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
+ and RZ families.
config ARCH_RPC
bool "RiscPC"
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK
- select CPU_V6
+ select CPU_V6K
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select HAVE_S3C2410_I2C if I2C
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
- select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
source "arch/arm/mach-bcm2835/Kconfig"
+source "arch/arm/mach-berlin/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-highbank/Kconfig"
+source "arch/arm/mach-hisi/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-moxart/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-imx/Kconfig"
select CLKSRC_MMIO
select CLKSRC_OF if OF
+source "arch/arm/firmware/Kconfig"
+
source arch/arm/mm/Kconfig
config ARM_NR_BANKS
depends on MMU || ARM_MPU
help
This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
- If you say N here, the kernel will run on single and multiprocessor
+ If you say N here, the kernel will run on uni- and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all, single
- processor machines. On a single processor machine, the kernel will
- run faster if you say N here.
+ you say Y here, the kernel will run on many, but not all,
+ uniprocessor machines. On a uniprocessor machine, the kernel
+ will run faster if you say N here.
See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
ARCH_S5PV210 || ARCH_EXYNOS4
default AT91_TIMER_HZ if ARCH_AT91
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
+ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
config SCHED_HRTICK
def_bool HIGH_RES_TIMERS
-config SCHED_HRTICK
- def_bool HIGH_RES_TIMERS
-
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE
- range 11 64 if ARCH_SHMOBILE
+ int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
+ range 11 64 if ARCH_SHMOBILE_LEGACY
default "12" if SOC_AM33XX
- default "9" if SA1111
+ default "9" if SA1111 || ARCH_EFM32
default "11"
help
The kernel memory allocator divides physically contiguous memory
depends on !GENERIC_ATOMIC64
select ARM_PSCI
select SWIOTLB_XEN
+ select ARCH_DMA_ADDR_T_64BIT
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
config ZBOOT_ROM
bool "Compressed boot loader in ROM/flash"
depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+ depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
help
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
- depends on OF && !ZBOOT_ROM
+ depends on OF
help
With this option, the boot code will look for a device tree binary
(DTB) appended to zImage
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
+ depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
config AUTO_ZRELADDR
bool "Auto calculation of the decompressed kernel image address"
- depends on !ZBOOT_ROM
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. If AUTO_ZRELADDR is selected, the address
projects / ~andy / linux / blobdiff