X-Git-Url: http://pileus.org/git/?p=~andy%2Fgtk;a=blobdiff_plain;f=acinclude.m4;h=f6f719d427c826c360a63c343e5971a84e9a14d2;hp=5de6f7aa1982bb1e12ba8f84d48491680bac76f7;hb=HEAD;hpb=95b3f3e46016e4993e60e8c139bfd03a106201ba diff --git a/acinclude.m4 b/acinclude.m4 index 5de6f7aa1..f6f719d42 100644 --- a/acinclude.m4 +++ b/acinclude.m4 @@ -1,761 +1,79 @@ -## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- -## Copyright (C) 1996-1999 Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +# autoconf 2.13 / 2.50 compatibility macro + +# GLIB_AC_DIVERT_BEFORE_HELP(STUFF) +# --------------------------------- +# Put STUFF early enough so that they are available for $ac_help expansion. +# Handle both classic (<= v2.13) and modern autoconf +AC_DEFUN([GLIB_AC_DIVERT_BEFORE_HELP], +[ifdef([m4_divert_text], [m4_divert_text([NOTICE],[$1])], + [ifdef([AC_DIVERT], [AC_DIVERT([NOTICE],[$1])], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)dnl +$1 +AC_DIVERT_POP()])])]) + +# GTK_ADD_LIB(VAR,LIBNAME) +# --------------------------------- +# Helper macro to add a -lBlah to a variable, avoiding repeats +# Note that this needs to be quoted when used in an enclosing macro +AC_DEFUN([GTK_ADD_LIB], +[ case "$$1 " in + *-l$2[[\ \ ]]*) ;; + *) $1="-l$2 $$1" ;; + esac ]) -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -dnl -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$host" in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac +# Checks the location of the XML Catalog +# Usage: +# JH_PATH_XML_CATALOG([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# Defines XMLCATALOG and XML_CATALOG_FILE substitutions +AC_DEFUN([JH_PATH_XML_CATALOG], +[ + # check for the presence of the XML catalog + AC_ARG_WITH([xml-catalog], + AC_HELP_STRING([--with-xml-catalog=CATALOG], + [path to xml catalog to use]),, + [with_xml_catalog=/etc/xml/catalog]) + jh_found_xmlcatalog=true + XML_CATALOG_FILE="$with_xml_catalog" + AC_SUBST([XML_CATALOG_FILE]) + AC_MSG_CHECKING([for XML catalog ($XML_CATALOG_FILE)]) + if test -f "$XML_CATALOG_FILE"; then + AC_MSG_RESULT([found]) + else + jh_found_xmlcatalog=false + AC_MSG_RESULT([not found]) fi - rm -rf conftest* - ;; -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" + # check for the xmlcatalog program + AC_PATH_PROG(XMLCATALOG, xmlcatalog, no) + if test "x$XMLCATALOG" = xno; then + jh_found_xmlcatalog=false fi - ;; -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -]) -esac -]) - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_SUBST(LD) -AC_PROG_LD_GNU -]) - -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -AC_SUBST(NM) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$host" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library, adds --enable-ltdl-convenience to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) + if $jh_found_xmlcatalog; then + ifelse([$1],,[:],[$1]) + else + ifelse([$2],,[AC_MSG_ERROR([could not find XML catalog])],[$2]) + fi ]) -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library, and adds --enable-ltdl-install to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) +# Checks if a particular URI appears in the XML catalog +# Usage: +# JH_CHECK_XML_CATALOG(URI, [FRIENDLY-NAME], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +AC_DEFUN([JH_CHECK_XML_CATALOG], +[ + AC_REQUIRE([JH_PATH_XML_CATALOG],[JH_PATH_XML_CATALOG(,[:])])dnl + AC_MSG_CHECKING([for ifelse([$2],,[$1],[$2]) in XML catalog]) + if $jh_found_xmlcatalog && \ + AC_RUN_LOG([$XMLCATALOG --noout "$XML_CATALOG_FILE" "$1" >&2]); then + AC_MSG_RESULT([found]) + ifelse([$3],,,[$3 +])dnl else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= + AC_MSG_RESULT([not found]) + ifelse([$4],, + [AC_MSG_ERROR([could not find ifelse([$2],,[$1],[$2]) in XML catalog])], + [$4]) fi ]) - -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. -# -# Modified to never use included libintl. -# Owen Taylor , 12/15/1998 -# -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 5 - -AC_DEFUN(AM_GTK_WITH_NLS, - [AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE(nls, - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT($USE_NLS) - AC_SUBST(USE_NLS) - - USE_INCLUDED_LIBINTL=no - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then -# AC_DEFINE(ENABLE_NLS) -# AC_MSG_CHECKING([whether included gettext is requested]) -# AC_ARG_WITH(included-gettext, -# [ --with-included-gettext use the GNU gettext library included here], -# nls_cv_force_use_gnu_gettext=$withval, -# nls_cv_force_use_gnu_gettext=no) -# AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) - nls_cv_force_use_gnu_gettext="no" - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If gettext or catgets are available (in this order) we - dnl use this. Else we have to fall back to GNU NLS library. - dnl catgets is only used if permitted by option --with-catgets. - nls_cv_header_intl= - nls_cv_header_libgt= - CATOBJEXT=NONE - - AC_CHECK_HEADER(libintl.h, - [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, - [AC_TRY_LINK([#include ], [return (int) dgettext ("","")], - gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)]) - - if test "$gt_cv_func_dgettext_libc" != "yes"; then - AC_CHECK_LIB(intl, bindtextdomain, - [AC_CACHE_CHECK([for dgettext in libintl], - gt_cv_func_dgettext_libintl, - [AC_CHECK_LIB(intl, dgettext, - gt_cv_func_dgettext_libintl=yes, - gt_cv_func_dgettext_libintl=no)], - gt_cv_func_dgettext_libintl=no)]) - fi - - if test "$gt_cv_func_dgettext_libc" = "yes" \ - || test "$gt_cv_func_dgettext_libintl" = "yes"; then - AC_DEFINE(HAVE_GETTEXT) - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl - if test "$MSGFMT" != "no"; then - AC_CHECK_FUNCS(dcgettext) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr], - [CATOBJEXT=.gmo - DATADIRNAME=share], - [CATOBJEXT=.mo - DATADIRNAME=lib]) - INSTOBJEXT=.mo - fi - fi - - # Added by Martin Baulig 12/15/98 for libc5 systems - if test "$gt_cv_func_dgettext_libc" != "yes" \ - && test "$gt_cv_func_dgettext_libintl" = "yes"; then - INTLLIBS=-lintl - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - fi - ]) - - if test "$CATOBJEXT" = "NONE"; then - AC_MSG_CHECKING([whether catgets can be used]) - AC_ARG_WITH(catgets, - [ --with-catgets use catgets functions if available], - nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) - AC_MSG_RESULT($nls_cv_use_catgets) - - if test "$nls_cv_use_catgets" = "yes"; then - dnl No gettext in C library. Try catgets next. - AC_CHECK_LIB(i, main) - AC_CHECK_FUNC(catgets, - [AC_DEFINE(HAVE_CATGETS) - INTLOBJS="\$(CATOBJS)" - AC_PATH_PROG(GENCAT, gencat, no)dnl -# if test "$GENCAT" != "no"; then -# AC_PATH_PROG(GMSGFMT, gmsgfmt, no) -# if test "$GMSGFMT" = "no"; then -# AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, -# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) -# fi -# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, -# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) -# USE_INCLUDED_LIBINTL=yes -# CATOBJEXT=.cat -# INSTOBJEXT=.cat -# DATADIRNAME=lib -# INTLDEPS='$(top_builddir)/intl/libintl.a' -# INTLLIBS=$INTLDEPS -# LIBS=`echo $LIBS | sed -e 's/-lintl//'` -# nls_cv_header_intl=intl/libintl.h -# nls_cv_header_libgt=intl/libgettext.h -# fi - ]) - fi - fi - - if test "$CATOBJEXT" = "NONE"; then - dnl Neither gettext nor catgets in included in the C library. - dnl Fall back on GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" != "yes"; then - AC_DEFINE(ENABLE_NLS) - else - # Unset this variable since we use the non-zero value as a flag. - CATOBJEXT= -# dnl Mark actions used to generate GNU NLS library. -# INTLOBJS="\$(GETTOBJS)" -# AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, -# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) -# AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) -# AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, -# [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) -# AC_SUBST(MSGFMT) -# USE_INCLUDED_LIBINTL=yes -# CATOBJEXT=.gmo -# INSTOBJEXT=.mo -# DATADIRNAME=share -# INTLDEPS='$(top_builddir)/intl/libintl.a' -# INTLLIBS=$INTLDEPS -# LIBS=`echo $LIBS | sed -e 's/-lintl//'` -# nls_cv_header_intl=intl/libintl.h -# nls_cv_header_libgt=intl/libgettext.h - fi - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext program is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po - else - DATADIRNAME=share - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h - fi - AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) - AC_OUTPUT_COMMANDS( - [case "$CONFIG_FILES" in *po/Makefile.in*) - sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile - esac]) - - -# # If this is used in GNU gettext we have to set USE_NLS to `yes' -# # because some of the sources are only built for this goal. -# if test "$PACKAGE" = gettext; then -# USE_NLS=yes -# USE_INCLUDED_LIBINTL=yes -# fi - - dnl These rules are solely for the distribution goal. While doing this - dnl we only have to keep exactly one list of the available catalogs - dnl in configure.in. - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done - - dnl Make all variables we use known to autoconf. - AC_SUBST(USE_INCLUDED_LIBINTL) - AC_SUBST(CATALOGS) - AC_SUBST(CATOBJEXT) - AC_SUBST(DATADIRNAME) - AC_SUBST(GMOFILES) - AC_SUBST(INSTOBJEXT) - AC_SUBST(INTLDEPS) - AC_SUBST(INTLLIBS) - AC_SUBST(INTLOBJS) - AC_SUBST(POFILES) - AC_SUBST(POSUB) - ]) - -AC_DEFUN(AM_GTK_GNU_GETTEXT, - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_ISC_POSIX])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_C_CONST])dnl - AC_REQUIRE([AC_C_INLINE])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - - AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ -unistd.h sys/param.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ -strdup __argz_count __argz_stringify __argz_next]) - - if test "${ac_cv_func_stpcpy+set}" != "set"; then - AC_CHECK_FUNCS(stpcpy) - fi - if test "${ac_cv_func_stpcpy}" = "yes"; then - AC_DEFINE(HAVE_STPCPY) - fi - - AM_LC_MESSAGES - AM_GTK_WITH_NLS - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - dnl The reference to in the installed file - dnl must be resolved because we cannot expect the users of this - dnl to define HAVE_LOCALE_H. - if test $ac_cv_header_locale_h = yes; then - INCLUDE_LOCALE_H="#include " - else - INCLUDE_LOCALE_H="\ -/* The system does not provide the header . Take care yourself. */" - fi - AC_SUBST(INCLUDE_LOCALE_H) - - dnl Determine which catalog format we have (if any is needed) - dnl For now we know about two different formats: - dnl Linux libc-5 and the normal X/Open format - test -d intl || mkdir intl - if test "$CATOBJEXT" = ".cat"; then - AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) - - dnl Transform the SED scripts while copying because some dumb SEDs - dnl cannot handle comments. - sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed - fi - dnl po2tbl.sed is always needed. - sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ - $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed - - dnl In the intl/Makefile.in we have a special dependency which makes - dnl only sense for gettext. We comment this out for non-gettext - dnl packages. - if test "$PACKAGE" = "gettext"; then - GT_NO="#NO#" - GT_YES= - else - GT_NO= - GT_YES="#YES#" - fi - AC_SUBST(GT_NO) - AC_SUBST(GT_YES) - - dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly - dnl find the mkinstalldirs script in another subdir but ($top_srcdir). - dnl Try to locate is. - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - AC_SUBST(MKINSTALLDIRS) - - dnl *** For now the libtool support in intl/Makefile is not for real. - l= - AC_SUBST(l) - - dnl Generate list of files to be processed by xgettext which will - dnl be included in po/Makefile. - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES - ]) -