--------------------------------------------------------------------------------
-fetchmail-6.3.20 (not yet released):
+fetchmail-6.3.23 (not yet released)
+
+# NOTE THAT THE RELEASE OF FUTURE FETCHMAIL 6.3.X VERSIONS IS UNCLEAR.
+Should a 7.0 release be made earlier, chances are that the 6.3.X branch
+is abandoned and its changes be folded into the 7.0 release, with changes
+after 6.3.22 not available on their own in a newer 6.3.X release.
+
+# REGRESSION FIXES
+* Fix compilation with OpenSSL implementations before 0.9.8m that lack
+ SSL_CTX_clear_options. Patch by Earl Chew.
+ Note that the use of older OpenSSL versions with fetchmail is unsupported and
+ *not* recommended.
+
+# BUG FIXES
+* Fix combination of --plugin and -f -. Patch by Alexander Zangerl,
+ to fix Debian Bug#671294.
+* Clean up logfile vs. syslog handling, and in case logfile overrides
+ syslog, send a message to the latter stating where logging goes.
# CHANGES
-* fetchmail no longer supports SSL v2, nor the corresponding SSL2 option to
- --sslproto. SSLv2 is insecure and had been deprecated 15 years ago. fetchmail
- will actively forbid SSLv2 negotiation by means of SSL_OP_NO_SSLv2.
- To fix Debian Bug#622054.
-* fetchmail now always uses its own MD5 implementation. The library and header
- variants are too diverse, and we've been bitten before -- and configure
- complains noisily on Cyrus-SASL's RFC1321 md5.h.
-* fetchmail now supports an environment variable to suppress marking deleted
- messages as seen at the same time, FETCHMAIL_IMAP_DELETED_REMAINS_UNSEEN.
- See the manual page for details. Requested by Jonathan Buschmann.
-* fetchmail sets Internet domain sockets to "keepalive" mode now. Note that
- there is no portable way to configure actual timeouts for this mode, and some
- systems only support a system-wide timeout setting.
+* The build process can now be made a bit more silent and concise through
+ ./configure --enable-silent-rules, or by adding "V=0" to the make command.
+
+# WORKAROUNDS
+* Make Maillennium POP3 workarounds less specific, to encompass
+ Maillennium POP3/UNIBOX (Maillennium V05.00c++). Reported by Eddie
+ via fetchmail-users mailing list, 2012-10-13.
+
+
+fetchmail-6.3.22 (released 2012-08-29, 26077 LoC):
+
+# SECURITY FIXES
+* for CVE-2012-3482:
+ NTLM: fetchmail mistook an error message that the server sent in response to
+ an NTLM request for protocol exchange, tried to decode it, and crashed while
+ reading from a bad memory location.
+ Also, with a carefully crafted NTLM challenge packet sent from the server, it
+ would be possible that fetchmail conveyed confidential data not meant for the
+ server through the NTLM response packet.
+ Fix: Detect base64 decoding errors, validate the NTLM challenge, and abort
+ NTLM authentication in case of error.
+ See fetchmail-SA-2012-02.txt for further details.
+ Reported by J. Porter Clark.
+
+* for CVE-2011-3389:
+ SSL/TLS (wrapped and STARTTLS): fetchmail used to disable a countermeasure
+ against a certain kind of attack against cipher block chaining initialization
+ vectors (SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS).
+ Whether this creates an exploitable situation, depends on the server and the
+ negotiated ciphers.
+ As a precaution, fetchmail 6.3.22 enables the countermeasure, by clearing
+ SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
+
+ NOTE that this can cause connections to certain non-conforming servers to
+ fail, in which case you can set the environment variable
+ FETCHMAIL_DISABLE_CBC_IV_COUNTERMEASURE to any non-empty value when starting
+ fetchmail to re-instate the compatibility option at the expense of security.
+
+ Reported by Apple Product Security.
+
+ For technical details, refer to <http://www.openssl.org/~bodo/tls-cbc.txt>.
+ See fetchmail-SA-2012-01.txt for further details.
+
+# BUG FIX
+* The Server certificate: message in verbose mode now appears on stdout like the
+ remainder of the output. Reported by Henry Jensen, to fix Debian Bug #639807.
+
+* The GSSAPI-related autoconf code now matches gssapi.c better, and uses
+ a different check to look for GSS_C_NT_HOSTBASED_SERVICE.
+ This fixes the GSSAPI-enabled build on NetBSD 6 Beta.
+
+# CHANGES
+* On systems where SSLv2_client_method isn't defined in OpenSSL (such as
+ newer Debian, and Ubuntu starting with 11.10 oneiric ocelot), don't
+ reference it (to fix the build) and if configured, print a run-time error
+ that the OS does not support SSLv2. Fixes Debian Bug #622054,
+ but note that that bug report has a more thorough patch that does away with
+ SSLv2 altogether.
+
+* The security and errata notices fetchmail-{EN,SA}-20??-??.txt are now
+ under the more relaxed CC BY-ND 3.0 license (the noncommercial clause
+ was dropped). The Creative Commons address was updated.
+
+* The Python-related Makefile.am parts were simplified to avoid an automake
+ 1.11.X bug around noinst_PYTHON, Automake Bug #10995.
+
+* Configuring fetchmail without SSL now triggers a configure warning,
+ and asks the user to consider running configure --with-ssl.
+
+# WORKAROUND
+* Some servers, notably Zimbra, return A1234 987 FETCH () in response to
+ a header request, in the face of message corruption. fetchmail now treats
+ these as temporary errors. Report and Patch by Mikulas Patocka, Red Hat.
+
+* Some servers, notably Microsoft Exchange, return "A0009 OK FETCH completed."
+ without any header in response to a header request for meeting reminder
+ messages (with a "meeting.ics" attachment). fetchmail now treats these as
+ transient errors. Report by John Connett, Patch by Sunil Shetye.
+
+# TRANSLATION UPDATES
+* [cs] Czech, by Petr Pisar
+* [de] German
+* [fr] French, by Frédéric Marchal
+* [ja] Japanese, by Takeshi Hamasaki
+* [pl] Polish, by Jakub Bogusz
+* [sv] Swedish, by Göran Uddeborg --- NEW TRANSLATION - Thank you!
+* [vi] Vietnamese, by Trần Ngọc Quân
+
+# KNOWN BUGS AND WORKAROUNDS
+ (This section floats upwards through the NEWS file so it stays with the
+ current release information)
+* Fetchmail does not handle messages without Message-ID header well
+ (See sourceforge.net bug #780933)
+* BSMTP is mostly untested and errors can cause corrupt output.
+* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
+ 64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit
+ fetchmail. Note that fetchmail doesn't take advantage of 64-bit code,
+ so compiling 32-bit SPARC code should not cause any difficulties.
+* Fetchmail does not track pending deletes across crashes.
+* The command line interface is sometimes a bit stubborn, for instance,
+ fetchmail -s doesn't work with a daemon running.
+* Linux systems may return duplicates of an IP address in some circumstances if
+ no or no global IPv6 addresses are configured.
+ (No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
+* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
+ messages. This will not be fixed, because the maintainer has no Kerberos 5
+ server to test against. Use GSSAPI.
+
+
+fetchmail-6.3.21 (released 2011-08-21, 26011 LoC):
+
+# CRITICAL BUG FIX
+* The IMAP client no longer inserts NUL bytes into the last line of a message
+ when it is not closed with a LF or CRLF sequence. Reported by Antoine Levitt.
+ As a side effect of the fix, and in order to avoid a full rewrite, fetchmail
+ will now CRLF-terminate the last line fetched through IMAP, even if it is
+ originally not terminated by LF or CRLF. This bears no relevance if your
+ messages end up in mbox, but adds line termination for storages (like Maildir)
+ that do not require that the last line be LF- or CRLF-terminated.
+
+# CONTRIB/ addition
+* There is a patch against fetchnews's source, contrib/rawlog.patch, that can
+ log (and hexdump non-printing characters) raw socket data to a file. It proved
+ useful to debug Antoine's bug described above.
+
+
+fetchmail-6.3.20 (released 2011-06-06, 26005 LoC):
+
+# SECURITY BUG FIXES
+* CVE-2011-1947:
+ STARTTLS: Fetchmail runs the IMAP STARTTLS or POP3 STLS negotiation with the
+ set timeout (default five minutes) now. This was reported missing, with
+ observed fetchmail freezes beyond a week, by Thomas Jarosch.
+ SSL-wrapped connections were unaffected by this timeout, so users of older
+ versions can force ssl-wrapped connections -- if supported by the server --
+ with the --ssl command line or ssl rcfile option.
+ See fetchmail-SA-2011-01.txt for further details.
# BUG FIXES
-* Call strlen() only once when removing CRLF from a line. (Sunil Shetye)
-* Do not search for UNSEEN messages in ranges. Usually, there are very few new
- messages and most of the range searches result in nothing. Instead, split the
- long response to make the IMAP driver think that there are multiple lines of
- response. (Sunil Shetye)
+* IMAP: Do not search for UNSEEN messages in ranges. Usually, there are very few
+ new messages and most of the range searches result in nothing. Instead, split
+ the long response to make the IMAP driver think that there are multiple lines
+ of response. (Sunil Shetye)
* Do not print "skipping message" for old messages even in verbose mode. If
there are too many old messages, the logs just get filled without any real
activity. (Sunil Shetye) (suggested by Yunfan Jiang)
+* Build: fetchmail now always uses its own MD5 implementation rather than trying
+ to find a system library with matched header. The library and header variants
+ found on systems are too diverse, and the code size saving is not worth any
+ more wasted user or programmer time.
+
+# CHANGES
+* Call strlen() only once when removing CRLF from a line. (Sunil Shetye)
+* fetchmail sets Internet domain sockets to "keepalive" mode now. Note that
+ there is no portable way to configure actual timeouts for this mode, and some
+ systems only support a system-wide timeout setting. fetchmail does not
+ attempt to tune the time spans of keepalive mode.
# TRANSLATION UPDATES
+ [cs] Chech (Petr Pisar)
+ [nl] Dutch (Erwin Poeze)
+ [fr] French (Frédéric Marchal)
+ [de] German (Matthias Andree)
[ja] Japanese (Takeshi Hamasaki)
+ [pl] Polish (Jakub Bogusz)
+ [sk] Slovak (Marcel Telka)
fetchmail-6.3.19 (released 2010-12-10, 25945 LoC):
[it] Italian (Vincenzo Campanella)
[pl] Polish (Jakub Bogusz)
-# KNOWN BUGS AND WORKAROUNDS
- (this section floats upwards through the NEWS file so it stays with the
- current release information - however, it was stuck with 6.3.8 for a while)
-* fetchmail does not handle messages without Message-ID header well
- (See sourceforge.net bug #780933)
-* BSMTP is mostly untested and errors can cause corrupt output.
-* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
- 64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit
- fetchmail. Note that fetchmail doesn't take advantage of 64-bit code,
- so compiling 32-bit SPARC code should not cause any difficulties.
-* fetchmail does not track pending deletes over crashes.
-* the command line interface is sometimes a bit stubborn, for instance,
- fetchmail -s doesn't work with a daemon running.
-* Linux systems may return duplicates of an IP address in some circumstances if
- no or no global IPv6 addresses are configured.
- (No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
-* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
- messages. This will not be fixed, because the maintainer has no Kerberos 5
- server to test against. Use GSSAPI.
-
fetchmail-6.3.18 (released 2010-10-09, 25936 LoC):
projects / ~andy / fetchmail / blobdiff