# Fetchmail Spanish Translation # Copyright 1999, 2005 Free Software Foundation, Inc. # Javier Kohen , 1999. # msgid "" msgstr "" "Project-Id-Version: fetchmail 6.2.6-pre8\n" "Report-Msgid-Bugs-To: fetchmail-devel@lists.berlios.de\n" "POT-Creation-Date: 2005-12-18 11:42+0100\n" "PO-Revision-Date: 2005-07-26 15:56-0300\n" "Last-Translator: Javier Kohen \n" "Language-Team: Spanish \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" #: checkalias.c:173 #, c-format msgid "Checking if %s is really the same node as %s\n" msgstr "Verificando si %s es realmente el mismo nodo que %s\n" #: checkalias.c:177 msgid "Yes, their IP addresses match\n" msgstr "Sí, sus direcciones IP coinciden\n" #: checkalias.c:181 msgid "No, their IP addresses don't match\n" msgstr "No, sus direcciones IP no coinciden\n" #: checkalias.c:197 #, fuzzy, c-format msgid "nameserver failure while looking for '%s' during poll of %s: %s\n" msgstr "" "fallo en la resolución de nombres buscando ‘%s’ durante la consulta de %s.\n" #: checkalias.c:222 #, c-format msgid "nameserver failure while looking for `%s' during poll of %s.\n" msgstr "" "fallo en la resolución de nombres buscando ‘%s’ durante la consulta de %s.\n" #: cram.c:95 msgid "could not decode BASE64 challenge\n" msgstr "no fue posible decodificar el desafío BASE64\n" #: cram.c:103 #, c-format msgid "decoded as %s\n" msgstr "decodificado como %s\n" #: driver.c:193 #, c-format msgid "kerberos error %s\n" msgstr "error de kerberos %s\n" #: driver.c:251 driver.c:256 #, c-format msgid "krb5_sendauth: %s [server says '%*s'] \n" msgstr "krb5_sendauth: %s [el servidor dice ‘%*s’] \n" #: driver.c:337 msgid "Subject: Fetchmail oversized-messages warning" msgstr "Subject: advertencia de fetchmail, mensajes excedidos en tamaño" #: driver.c:341 #, fuzzy, c-format msgid "The following oversized messages were deleted on server %s account %s:" msgstr "" "Los siguientes mensajes permanecen en el servidor de correo %s por estar " "excedidos en tamaño:" #: driver.c:345 #, fuzzy, c-format msgid "The following oversized messages remain on server %s account %s:" msgstr "" "Los siguientes mensajes permanecen en el servidor de correo %s por estar " "excedidos en tamaño:" #: driver.c:364 #, fuzzy, c-format msgid " %d msg %d octets long deleted by fetchmail." msgstr " %d mensajes de %d octetos de largo omitidos por fetchmail." #: driver.c:368 #, c-format msgid " %d msg %d octets long skipped by fetchmail." msgstr " %d mensajes de %d octetos de largo omitidos por fetchmail." #: driver.c:503 #, c-format msgid "skipping message %s@%s:%d" msgstr "salteando mensaje %s@%s:%d" #: driver.c:557 #, c-format msgid "skipping message %s@%s:%d (%d octets)" msgstr "salteando mensaje %s@%s:%d (%d octetos)" #: driver.c:573 msgid " (length -1)" msgstr " (longitud -1)" #: driver.c:576 msgid " (oversized)" msgstr " (demasiado grande)" #: driver.c:591 #, c-format msgid "couldn't fetch headers, message %s@%s:%d (%d octets)\n" msgstr "" "no fue posible recibir los encabezados, mensaje %s@%s:%d (%d octetos)\n" #: driver.c:608 #, c-format msgid "reading message %s@%s:%d of %d" msgstr "leyendo el mensaje %s@%s:%d de %d" #: driver.c:613 #, c-format msgid " (%d octets)" msgstr " (%d octetos)" #: driver.c:614 #, c-format msgid " (%d header octets)" msgstr " (%d octetos en la cabecera) " #: driver.c:686 #, c-format msgid " (%d body octets) " msgstr " (%d octetos en el cuerpo) " #: driver.c:744 #, c-format msgid "" "message %s@%s:%d was not the expected length (%d actual != %d expected)\n" msgstr "" "el mensaje %s@%s:%d no tenía la longitud esperada (%d actual != %d " "esperada)\n" #: driver.c:775 msgid " retained\n" msgstr " retenido\n" #: driver.c:785 msgid " flushed\n" msgstr " eliminado\n" #: driver.c:802 msgid " not flushed\n" msgstr " no eliminado\n" #: driver.c:820 #, c-format msgid "fetchlimit %d reached; %d message left on server %s account %s\n" msgid_plural "" "fetchlimit %d reached; %d messages left on server %s account %s\n" msgstr[0] "" "límite de %1$d mensajes alcanzado; se dejó %2$d mensaje en la cuenta %4$s " "del servidor %3$s\n" msgstr[1] "" "límite de %1$d mensajes alcanzado; se dejaron %2$d mensajes en la cuenta %4" "$s del servidor %3$s\n" #: driver.c:884 msgid "SIGPIPE thrown from an MDA or a stream socket error\n" msgstr "SIGPIPE lanzado desde un MDA o un error de socket de flujo\n" #: driver.c:891 #, c-format msgid "timeout after %d seconds waiting to connect to server %s.\n" msgstr "" "tiempo agotado después de %d segundos de espera para conectarse con el " "servidor %s.\n" #: driver.c:895 #, c-format msgid "timeout after %d seconds waiting for server %s.\n" msgstr "tiempo agotado después de %d segundos de espera por el servidor %s.\n" #: driver.c:899 #, c-format msgid "timeout after %d seconds waiting for %s.\n" msgstr "tiempo agotado después de %d segundos de espera por %s.\n" #: driver.c:904 #, c-format msgid "timeout after %d seconds waiting for listener to respond.\n" msgstr "" "tiempo agotado después de %d segundos de esperar respuesta del cliente.\n" #: driver.c:907 #, c-format msgid "timeout after %d seconds.\n" msgstr "tiempo agotado después de %d segundos.\n" #: driver.c:919 msgid "Subject: fetchmail sees repeated timeouts" msgstr "Subject: fetchmail ve repetidos excesos del tiempo de espera" #: driver.c:922 #, c-format msgid "" "Fetchmail saw more than %d timeouts while attempting to get mail from %s@%" "s.\n" msgstr "" "Fetchmail vio más de %d excesos en el tiempo de espera mientras intentaba " "obtener correo de %s@%s.\n" #: driver.c:926 msgid "" "This could mean that your mailserver is stuck, or that your SMTP\n" "server is wedged, or that your mailbox file on the server has been\n" "corrupted by a server error. You can run `fetchmail -v -v' to\n" "diagnose the problem.\n" "\n" "Fetchmail won't poll this mailbox again until you restart it.\n" msgstr "" "Esto puede significar que su servidor de correo se trabó, o que su\n" "servidor SMTP se colgó, o que su casilla de correo en el servidor ha\n" "sido corrupta por un error de servidor. Puede ejecutar ‘fetchmail -v -v’\n" "para diagnosticar el problema.\n" "Fetchmail no inquirirá esta casilla hasta que lo reinicie.\n" #: driver.c:951 #, c-format msgid "pre-connection command failed with status %d\n" msgstr "el comando preconexión falló con estado %d\n" #: driver.c:975 #, c-format msgid "couldn't find HESIOD pobox for %s\n" msgstr "no fue posible encontrar casilla HESIOD para %s\n" #: driver.c:996 msgid "Lead server has no name.\n" msgstr "El servidor líder no tiene nombre.\n" #: driver.c:1020 #, c-format msgid "couldn't find canonical DNS name of %s (%s)\n" msgstr "no fue posible encontrar el nombre DNS canónico de %s (%s)\n" #: driver.c:1058 #, c-format msgid "%s connection to %s failed" msgstr "Fallo la conexión de %s a %s" #: driver.c:1074 msgid "Subject: Fetchmail unreachable-server warning." msgstr "Subject: aviso de server fuera de alcance de fetchmail." #: driver.c:1076 #, c-format msgid "Fetchmail could not reach the mail server %s:" msgstr "Fetchmail no puede alcanzar al servidor de correo %s:" #: driver.c:1102 imap.c:392 pop3.c:433 msgid "SSL connection failed.\n" msgstr "Fallo en la conexión SSL.\n" #: driver.c:1155 #, c-format msgid "Lock-busy error on %s@%s\n" msgstr "Error ‘lock-busy’ en %s@%s\n" #: driver.c:1159 #, c-format msgid "Server busy error on %s@%s\n" msgstr "Error: servidor ocupado en %s@%s\n" #: driver.c:1164 #, c-format msgid "Authorization failure on %s@%s%s\n" msgstr "Fallo de autorización en %s@%s%s\n" #: driver.c:1167 msgid " (previously authorized)" msgstr " (previamente autorizado)" #: driver.c:1188 #, c-format msgid "Subject: fetchmail authentication failed on %s@%s" msgstr "Subject: la autenticación de fetchmail falló en %s@%s" #: driver.c:1192 #, c-format msgid "Fetchmail could not get mail from %s@%s.\n" msgstr "Fetchmail no pudo obtener correo de %s@%s.\n" #: driver.c:1196 msgid "" "The attempt to get authorization failed.\n" "Since we have already succeeded in getting authorization for this\n" "connection, this is probably another failure mode (such as busy server)\n" "that fetchmail cannot distinguish because the server didn't send a useful\n" "error message.\n" "\n" "However, if you HAVE changed your account details since starting the\n" "fetchmail daemon, you need to stop the daemon, change your configuration\n" "of fetchmail, and then restart the daemon.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "El intento de obtener autorización falló.\n" "Debido a que ya hemos tenido éxito al obtener autorización para esta\n" "conexión, esto probablemente sea otro modo de fallo (como un servidor\n" "ocupado) que fetchmail no puede distinguir porque el servido no envió\n" "un mensaje de error útil.\n" "\n" "Sin embargo, si cambiaste los detalles de tu cuenta tras haber iniciado\n" "el proceso fetchmail, necesitás detener el proceso, cambiar la configu-\n" "ración de fetchmail y reiniciarlo.\n" "\n" "El proceso fetchmail continuará corriendo e intentando establecer la\n" "conexión en cada ciclo. No se enviarán más notificaciones hasta que el\n" "servicio sea restablecido." #: driver.c:1211 msgid "" "The attempt to get authorization failed.\n" "This probably means your password is invalid, but some servers have\n" "other failure modes that fetchmail cannot distinguish from this\n" "because they don't send useful error messages on login failure.\n" "\n" "The fetchmail daemon will continue running and attempt to connect\n" "at each cycle. No future notifications will be sent until service\n" "is restored." msgstr "" "El intento de obtener autorización falló.\n" "Esto probablemente signifique que su clave es inválida. Aunque algunos\n" "servidores POP3 tienen otros modos de fallar que fetchmail no puede\n" "distinguir de éste porque no envían mensajes de error útiles cuando se\n" "falla en la entrada.\n" "\n" "El proceso fetchmail continuará corriendo e intentando establecer la\n" "conexión en cada ciclo. No se enviarán más notificaciones hasta que el\n" "servicio sea restablecido." #: driver.c:1226 #, c-format msgid "Repoll immediately on %s@%s\n" msgstr "Reinquirir inmediatamente %s@%s\n" #: driver.c:1231 #, c-format msgid "Unknown login or authentication error on %s@%s\n" msgstr "Error de entrada o de autenticación desconocido en %s@%s\n" #: driver.c:1255 #, c-format msgid "Authorization OK on %s@%s\n" msgstr "Autorización exitosa en %s@%s\n" #: driver.c:1261 #, c-format msgid "Subject: fetchmail authentication OK on %s@%s" msgstr "Subject: autenticación de fetchmail aprobada en %s@%s" #: driver.c:1265 #, c-format msgid "Fetchmail was able to log into %s@%s.\n" msgstr "Fetchmail pudo registrarse en %s@%s.\n" #: driver.c:1269 msgid "Service has been restored.\n" msgstr "El servicio ha sido reestablecido.\n" #: driver.c:1300 #, c-format msgid "selecting or re-polling folder %s\n" msgstr "seleccionando o re-inquiriendo la carpeta %s\n" #: driver.c:1302 msgid "selecting or re-polling default folder\n" msgstr "seleccionando o re-inquiriendo la carpeta por defecto\n" #: driver.c:1314 #, c-format msgid "%s at %s (folder %s)" msgstr "%s en %s (carpeta %s)" #: driver.c:1317 rcfile_y.y:380 #, c-format msgid "%s at %s" msgstr "%s en %s" #: driver.c:1322 #, c-format msgid "Polling %s\n" msgstr "Inquiriendo %s\n" #: driver.c:1326 #, c-format msgid "%d message (%d %s) for %s" msgid_plural "%d messages (%d %s) for %s" msgstr[0] "%d mensaje (%d %s) para %s" msgstr[1] "%d mensajes (%d %s) para %s" #: driver.c:1329 msgid "seen" msgid_plural "seen" msgstr[0] "visto" msgstr[1] "vistos" #: driver.c:1332 #, c-format msgid "%d message for %s" msgid_plural "%d messages for %s" msgstr[0] "%d mensaje para %s" msgstr[1] "%d mensajes para %s" #: driver.c:1339 #, c-format msgid " (%d octets).\n" msgstr " (%d octetos).\n" #: driver.c:1345 #, c-format msgid "No mail for %s\n" msgstr "No hay correo para %s\n" #: driver.c:1378 imap.c:89 msgid "bogus message count!" msgstr "¡cantidad de mensajes incorrecta!" #: driver.c:1520 msgid "socket" msgstr "socket" #: driver.c:1523 msgid "missing or bad RFC822 header" msgstr "el encabezado RFC822 falta o está arruinado" #: driver.c:1526 msgid "MDA" msgstr "MDA" #: driver.c:1529 msgid "client/server synchronization" msgstr "sincronización cliente/servidor" #: driver.c:1532 msgid "client/server protocol" msgstr "protocolo cliente/servidor" #: driver.c:1535 msgid "lock busy on server" msgstr "bloqueo ocupado en el servidor" #: driver.c:1538 msgid "SMTP transaction" msgstr "Transacción SMTP" #: driver.c:1541 msgid "DNS lookup" msgstr "búsqueda en DNS" #: driver.c:1544 #, fuzzy msgid "undefined" msgstr "error indefinido\n" #: driver.c:1550 #, fuzzy, c-format msgid "%s error while fetching from %s@%s and delivering to SMTP host %s\n" msgstr "error ‘%s’ durante el envío a la máquina SMTP %s\n" #: driver.c:1552 #, fuzzy msgid "unknown" msgstr "máquina desconocida." #: driver.c:1554 #, fuzzy, c-format msgid "%s error while fetching from %s@%s\n" msgstr "error ‘%s’ recibiendo de %s\n" #: driver.c:1564 #, c-format msgid "post-connection command failed with status %d\n" msgstr "el comando posconexión falló con estado %d\n" #: driver.c:1585 msgid "Kerberos V4 support not linked.\n" msgstr "Soporte de Kerberos V4 no incluido.\n" #: driver.c:1593 msgid "Kerberos V5 support not linked.\n" msgstr "Soporte de Kerberos V5 no incluido.\n" #: driver.c:1604 #, c-format msgid "Option --flush is not supported with %s\n" msgstr "Opción --flush no soportada con %s\n" #: driver.c:1610 #, c-format msgid "Option --all is not supported with %s\n" msgstr "Opción --all no soportada con %s\n" #: driver.c:1619 #, c-format msgid "Option --limit is not supported with %s\n" msgstr "Opción --limit no soportada con %s\n" #: env.c:56 #, c-format msgid "" "%s: The QMAILINJECT environment variable is set.\n" "This is dangerous as it can make qmail-inject or qmail's sendmail wrapper\n" "tamper with your From: or Message-ID: headers.\n" "Try \"env QMAILINJECT= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: La variable de entorno QMAILINJECT está configurada.\n" "Esto es peligroso dado que puede hacer que qmail-inject o el envoltorio\n" "sendmail de qmail pisoteen tus encabezados From: o Message-ID:.\n" "Prueba “env QMAILINJECT= %s TUS ARGUMENTOS ACA”\n" "%s: Abort.\n" #: env.c:68 #, c-format msgid "" "%s: The NULLMAILER_FLAGS environment variable is set.\n" "This is dangerous as it can make nullmailer-inject or nullmailer's\n" "sendmail wrapper tamper with your From:, Message-ID: or Return-Path: " "headers.\n" "Try \"env NULLMAILER_FLAGS= %s YOUR ARGUMENTS HERE\"\n" "%s: Abort.\n" msgstr "" "%s: La variable de entorno NULLMAILER_FLAGS está configurada.\n" "Esto es peligroso dado que puede hacer que nullmailer-inject o el\n" "envoltorio sendmail de nullmailer pisoteen tus encabezados From:,\n" "Message-ID: o Return-Path.\n" "Prueba “env NULLMAILER_FLAGS= %s TUS ARGUMENTOS ACA”\n" "%s: Abort.\n" #: env.c:80 #, c-format msgid "%s: You don't exist. Go away.\n" msgstr "%s: No existís. Andate.\n" #: env.c:142 #, c-format msgid "%s: can't determine your host!" msgstr "%s: ¡no se puede determinar su máquina!" #: env.c:163 #, c-format msgid "gethostbyname failed for %s\n" msgstr "gethostbyname falló para %s\n" #: env.c:165 msgid "Cannot find my own host in hosts database to qualify it!\n" msgstr "" #: env.c:169 msgid "" "Trying to continue with unqualified hostname.\n" "DO NOT report broken Received: headers, HELO/EHLO lines or similar " "problems!\n" "DO repair your /etc/hosts, DNS, NIS or LDAP instead.\n" msgstr "" #: etrn.c:47 odmr.c:58 #, c-format msgid "%s's SMTP listener does not support ESMTP\n" msgstr "El servidor de SMTP de %s no soporta ESMTP\n" #: etrn.c:53 #, c-format msgid "%s's SMTP listener does not support ETRN\n" msgstr "El servidor de SMTP de %s no soporta ETRN\n" #: etrn.c:77 #, c-format msgid "Queuing for %s started\n" msgstr "Cola para %s iniciada\n" #: etrn.c:82 #, c-format msgid "No messages waiting for %s\n" msgstr "No hay mensajes esperando para %s\n" #: etrn.c:88 #, c-format msgid "Pending messages for %s started\n" msgstr "Mensajes pendientes para %s iniciados\n" #: etrn.c:92 #, c-format msgid "Unable to queue messages for node %s\n" msgstr "Incapaz de poner los mensajes para el nodo %s en la cola\n" #: etrn.c:96 #, c-format msgid "Node %s not allowed: %s\n" msgstr "Nodo %s no permitido: %s\n" #: etrn.c:100 msgid "ETRN syntax error\n" msgstr "Error de sintaxis ETRN\n" #: etrn.c:104 msgid "ETRN syntax error in parameters\n" msgstr "Error de sintaxis ETRN en los parámetros\n" #: etrn.c:108 #, c-format msgid "Unknown ETRN error %d\n" msgstr "Error ETRN desconocido %d\n" #: etrn.c:151 msgid "Option --keep is not supported with ETRN\n" msgstr "La opción --keep no es soportada con ETRN\n" #: etrn.c:155 msgid "Option --flush is not supported with ETRN\n" msgstr "La opción --keep no es soportada con ETRN\n" #: etrn.c:159 #, fuzzy msgid "Option --folder is not supported with ETRN\n" msgstr "La opción --keep no es soportada con ETRN\n" #: etrn.c:163 msgid "Option --check is not supported with ETRN\n" msgstr "La opción --check no es soportada con ETRN\n" #: fetchmail.c:159 msgid "WARNING: Running as root is discouraged.\n" msgstr "ADVERTENCIA: se recomienda no ejecutar esta aplicación como root.\n" #: fetchmail.c:171 msgid "fetchmail: invoked with" msgstr "fetchmail: invocado con" #: fetchmail.c:195 msgid "could not get current working directory\n" msgstr "no fue posible obtener el directorio de trabajo actual\n" #: fetchmail.c:257 #, c-format msgid "This is fetchmail release %s" msgstr "Esta es la versión de fetchmail %s" #: fetchmail.c:354 #, c-format msgid "Taking options from command line%s%s\n" msgstr "Tomando opciones de la línea de comandos%s%s\n" #: fetchmail.c:355 msgid " and " msgstr " y " #: fetchmail.c:360 #, c-format msgid "No mailservers set up -- perhaps %s is missing?\n" msgstr "No hay servidores de correo configurados -- ¿por ahí falta %s?\n" #: fetchmail.c:381 msgid "fetchmail: no mailservers have been specified.\n" msgstr "fetchmail: no han sido especificados servidores de correo.\n" #: fetchmail.c:393 msgid "fetchmail: no other fetchmail is running\n" msgstr "fetchmail: ningún otro fetchmail está siendo ejecutando\n" #: fetchmail.c:399 #, c-format msgid "fetchmail: error killing %s fetchmail at %d; bailing out.\n" msgstr "fetchmail: error terminando %s fetchmail (%d); abandonando.\n" #: fetchmail.c:400 fetchmail.c:409 msgid "background" msgstr "segundo plano" #: fetchmail.c:400 fetchmail.c:409 msgid "foreground" msgstr "primer plano" #: fetchmail.c:408 #, c-format msgid "fetchmail: %s fetchmail at %d killed.\n" msgstr "fetchmail: %s fetchmail (%d) terminando.\n" #: fetchmail.c:431 msgid "" "fetchmail: can't check mail while another fetchmail to same host is " "running.\n" msgstr "" "fetchmail: no es posible verificar el correo mientras otro fetchmail está en " "ejecución hacia la misma máquina\n" #: fetchmail.c:437 #, c-format msgid "" "fetchmail: can't poll specified hosts with another fetchmail running at %d.\n" msgstr "" "fetchmail: no es posible inquirir las máquinas especificadas con otro " "fetchmail (%d) en ejecución.\n" #: fetchmail.c:444 #, c-format msgid "fetchmail: another foreground fetchmail is running at %d.\n" msgstr "fetchmail: otro fetchmail (%d) está en ejecución en primer plano.\n" #: fetchmail.c:454 msgid "" "fetchmail: can't accept options while a background fetchmail is running.\n" msgstr "" "fetchmail: no es posible aceptar opciones mientras un fetchmail está en " "ejecución en segundo plano.\n" #: fetchmail.c:460 #, c-format msgid "fetchmail: background fetchmail at %d awakened.\n" msgstr "fetchmail: fetchmail (%d) en segundo plano despertado.\n" #: fetchmail.c:472 #, c-format msgid "fetchmail: elder sibling at %d died mysteriously.\n" msgstr "fetchmail: proceso hijo más antiguo (%d) murió misteriosamente.\n" #: fetchmail.c:487 #, c-format msgid "fetchmail: can't find a password for %s@%s.\n" msgstr "fetchmail: no se puede encontrar una clave para %s@%s.\n" #: fetchmail.c:491 #, c-format msgid "Enter password for %s@%s: " msgstr "Ingrese clave para %s@%s: " #: fetchmail.c:522 #, c-format msgid "starting fetchmail %s daemon \n" msgstr "iniciando fetchmail %s en segundo plano \n" #: fetchmail.c:537 fetchmail.c:539 #, c-format msgid "could not open %s to append logs to \n" msgstr "no fue posible abrir %s para anexarle mensajes de registro\n" #: fetchmail.c:575 #, c-format msgid "couldn't time-check %s (error %d)\n" msgstr "no se pudo temporizar %s (error %d)\n" #: fetchmail.c:580 #, c-format msgid "restarting fetchmail (%s changed)\n" msgstr "reiniciando fetchmail (%s cambió)\n" #: fetchmail.c:585 msgid "attempt to re-exec may fail as directory has not been restored\n" msgstr "" "el intento de re-ejectuar puede fallar dado que el directorio no ha sido " "restaurado\n" #: fetchmail.c:612 msgid "attempt to re-exec fetchmail failed\n" msgstr "el intento de re-ejecutar fetchmail falló\n" #: fetchmail.c:640 #, c-format msgid "poll of %s skipped (failed authentication or too many timeouts)\n" msgstr "" "no se consulta %s (fallo en la autenticación o demasiados excesos de " "espera)\n" #: fetchmail.c:652 #, c-format msgid "interval not reached, not querying %s\n" msgstr "intervalo no alcanzado, no se interrogará %s\n" #: fetchmail.c:690 msgid "Query status=0 (SUCCESS)\n" msgstr "Estado de la consulta=0 (SUCCESS)\n" #: fetchmail.c:692 msgid "Query status=1 (NOMAIL)\n" msgstr "Estado de la consulta=1 (NOMAIL)\n" #: fetchmail.c:694 msgid "Query status=2 (SOCKET)\n" msgstr "Estado de la consulta=2 (SOCKET)\n" #: fetchmail.c:696 msgid "Query status=3 (AUTHFAIL)\n" msgstr "Estado de la consulta=3 (AUTHFAIL)\n" #: fetchmail.c:698 msgid "Query status=4 (PROTOCOL)\n" msgstr "Estado de la consulta=4 (PROTOCOL)\n" #: fetchmail.c:700 msgid "Query status=5 (SYNTAX)\n" msgstr "Estado de la consulta=5 (SYNTAX)\n" #: fetchmail.c:702 msgid "Query status=6 (IOERR)\n" msgstr "Estado de la consulta=6 (IOERR)\n" #: fetchmail.c:704 msgid "Query status=7 (ERROR)\n" msgstr "Estado de la consulta=7 (ERROR)\n" #: fetchmail.c:706 msgid "Query status=8 (EXCLUDE)\n" msgstr "Estado de la consulta=8 (EXCLUDE)\n" #: fetchmail.c:708 msgid "Query status=9 (LOCKBUSY)\n" msgstr "Estado de la consulta=9 (LOCKBUSY)\n" #: fetchmail.c:710 msgid "Query status=10 (SMTP)\n" msgstr "Estado de la consulta=10 (SMTP)\n" #: fetchmail.c:712 msgid "Query status=11 (DNS)\n" msgstr "Estado de la consulta=11 (DNS)\n" #: fetchmail.c:714 msgid "Query status=12 (BSMTP)\n" msgstr "Estado de la consulta=12 (BSMTP)\n" #: fetchmail.c:716 msgid "Query status=13 (MAXFETCH)\n" msgstr "Estado de la consulta=13 (MAXFETCH)\n" #: fetchmail.c:718 #, c-format msgid "Query status=%d\n" msgstr "Estado de la consulta=%d\n" #: fetchmail.c:764 msgid "All connections are wedged. Exiting.\n" msgstr "Todas las conexiones están trabadas. Saliendo.\n" #: fetchmail.c:771 #, c-format msgid "sleeping at %s\n" msgstr "durmiendo en %s\n" #: fetchmail.c:795 #, c-format msgid "awakened by %s\n" msgstr "despertado por %s\n" #: fetchmail.c:798 #, c-format msgid "awakened by signal %d\n" msgstr "despertado por señal %d\n" #: fetchmail.c:805 #, c-format msgid "awakened at %s\n" msgstr "despertado en %s\n" #: fetchmail.c:811 #, c-format msgid "normal termination, status %d\n" msgstr "terminación normal, estado %d\n" #: fetchmail.c:963 msgid "couldn't time-check the run-control file\n" msgstr "no se pudo temporizar el archivo de control de ejecución\n" #: fetchmail.c:996 #, c-format msgid "Warning: multiple mentions of host %s in config file\n" msgstr "" "Cuidado: múltiple mención de la máquina %s en el archivo de configuración\n" #: fetchmail.c:1029 #, fuzzy msgid "fetchmail: Error: multiple \"defaults\" records in config file.\n" msgstr "" "Cuidado: múltiple mención de la máquina %s en el archivo de configuración\n" #: fetchmail.c:1149 msgid "SSL support is not compiled in.\n" msgstr "El soporte de SSL no fue compilado.\n" #: fetchmail.c:1180 #, c-format msgid "" "fetchmail: warning: no DNS available to check multidrop fetches from %s\n" msgstr "" "fetchmail: cuidado: no hay DNS disponible para verificar recepciones " "‘multidrop’ de %s\n" #: fetchmail.c:1191 #, c-format msgid "warning: multidrop for %s requires envelope option!\n" msgstr "cuidado: ¡‘multidrop’ para %s requiere la opción envelope!\n" #: fetchmail.c:1192 msgid "warning: Do not ask for support if all mail goes to postmaster!\n" msgstr "" "cuidado: ¡no pida soporte técnico si todo el correo es dirigido al " "postmaster!\n" #: fetchmail.c:1209 #, fuzzy, c-format msgid "" "fetchmail: %s configuration invalid, specify positive port number for " "service or port\n" msgstr "" "La configuración %s es inválida, el número de puerto no puede ser negativo\n" #: fetchmail.c:1216 #, fuzzy, c-format msgid "fetchmail: %s configuration invalid, RPOP requires a privileged port\n" msgstr "configuración de %s inválida, RPOP requiere un puerto privilegiado\n" #: fetchmail.c:1234 #, c-format msgid "%s configuration invalid, LMTP can't use default SMTP port\n" msgstr "" "configuración de %s inválida, LMTP no puede usar el puerto SMTP por defecto\n" #: fetchmail.c:1248 msgid "Both fetchall and keep on in daemon mode is a mistake!\n" msgstr "" "¡Usar ‘fetchall’ junto a ‘keep’ en modo de ejecución en segundo plano es un " "error!\n" #: fetchmail.c:1282 #, c-format msgid "terminated with signal %d\n" msgstr "terminado con señal %d\n" #: fetchmail.c:1354 #, c-format msgid "%s querying %s (protocol %s) at %s: poll started\n" msgstr "%s interrogando a %s (protocolo %s) en %s: consulta iniciada\n" #: fetchmail.c:1379 msgid "POP2 support is not configured.\n" msgstr "El soporte de POP2 no está configurado.\n" #: fetchmail.c:1391 msgid "POP3 support is not configured.\n" msgstr "El soporte de POP3 no está configurado.\n" #: fetchmail.c:1401 msgid "IMAP support is not configured.\n" msgstr "El soporte de IMAP no está configurado.\n" #: fetchmail.c:1407 msgid "ETRN support is not configured.\n" msgstr "El soporte de ETRN no está configurado.\n" #: fetchmail.c:1415 msgid "ODMR support is not configured.\n" msgstr "El soporte de ODMR no está configurado.\n" #: fetchmail.c:1422 msgid "unsupported protocol selected.\n" msgstr "fue seleccionado un protocolo no soportado.\n" #: fetchmail.c:1432 #, c-format msgid "%s querying %s (protocol %s) at %s: poll completed\n" msgstr "%s interrogando %s (protocolo %s) en %s: consulta terminada\n" #: fetchmail.c:1449 #, c-format msgid "Poll interval is %d seconds\n" msgstr "El intervalo entre consultas es de %d segundos\n" #: fetchmail.c:1451 #, c-format msgid "Logfile is %s\n" msgstr "El archivo de registro es %s\n" #: fetchmail.c:1453 #, c-format msgid "Idfile is %s\n" msgstr "El archivo con identificaciones es %s\n" #: fetchmail.c:1456 msgid "Progress messages will be logged via syslog\n" msgstr "Los mensajes de progreso serán registrados vía syslog\n" #: fetchmail.c:1459 msgid "Fetchmail will masquerade and will not generate Received\n" msgstr "Fetchmail enmascarará y no generará ‘Received’\n" #: fetchmail.c:1461 msgid "Fetchmail will show progress dots even in logfiles.\n" msgstr "" "Fetchmail mostrará puntos de progreso incluso en los archivos de registro.\n" #: fetchmail.c:1463 #, c-format msgid "Fetchmail will forward misaddressed multidrop messages to %s.\n" msgstr "Fetchmail reenviará mensajes ‘multidrop’ mal direccionados a %s.\n" #: fetchmail.c:1467 msgid "Fetchmail will direct error mail to the postmaster.\n" msgstr "Fetchmail dirigirá el correo de error al ‘postmaster’.\n" #: fetchmail.c:1469 msgid "Fetchmail will direct error mail to the sender.\n" msgstr "Fetchmail dirigirá el correo de error al remitente.\n" #: fetchmail.c:1476 #, c-format msgid "Options for retrieving from %s@%s:\n" msgstr "Opciones para recibir de %s@%s:\n" #: fetchmail.c:1480 #, c-format msgid " Mail will be retrieved via %s\n" msgstr " El correo será recibido vía %s\n" #: fetchmail.c:1483 #, c-format msgid " Poll of this server will occur every %d interval.\n" msgid_plural " Poll of this server will occur every %d intervals.\n" msgstr[0] " La consulta de este servidor ocurrirá cada %d intervalo.\n" msgstr[1] " La consulta de este servidor ocurrirá cada %d intervalos.\n" #: fetchmail.c:1487 #, c-format msgid " True name of server is %s.\n" msgstr " El nombre verdadero del servidor es %s.\n" #: fetchmail.c:1490 msgid " This host will not be queried when no host is specified.\n" msgstr " Esta máquina sólo será interrogada si una máquina es especificada.\n" #: fetchmail.c:1491 msgid " This host will be queried when no host is specified.\n" msgstr "" " Esta máquina será interrogada cuando no se especifique una máquina.\n" #: fetchmail.c:1495 msgid " Password will be prompted for.\n" msgstr " La clave será pedida.\n" #: fetchmail.c:1499 #, c-format msgid " APOP secret = \"%s\".\n" msgstr " Secreto APOP = “%s”.\n" #: fetchmail.c:1502 #, c-format msgid " RPOP id = \"%s\".\n" msgstr " Identificación RPOP = “%s”.\n" #: fetchmail.c:1505 #, c-format msgid " Password = \"%s\".\n" msgstr " Clave = “%s”.\n" #: fetchmail.c:1514 #, c-format msgid " Protocol is KPOP with Kerberos %s authentication" msgstr " El protocolo es KPOP con autenticación Kerberos %s" #: fetchmail.c:1517 #, c-format msgid " Protocol is %s" msgstr " El protocolo es %s" #: fetchmail.c:1519 #, c-format msgid " (using service %s)" msgstr " (usando servicio %s)" #: fetchmail.c:1521 msgid " (using default port)" msgstr " (usando puerto por defecto)" #: fetchmail.c:1523 msgid " (forcing UIDL use)" msgstr " (forzando el uso de UIDL)" #: fetchmail.c:1529 msgid " All available authentication methods will be tried.\n" msgstr " Se probarán todos los métodos de autenticación disponibles.\n" #: fetchmail.c:1532 msgid " Password authentication will be forced.\n" msgstr " Se forzará autenticación con clave.\n" #: fetchmail.c:1535 #, fuzzy msgid " MSN authentication will be forced.\n" msgstr " Se forzará autenticación NTLM.\n" #: fetchmail.c:1538 msgid " NTLM authentication will be forced.\n" msgstr " Se forzará autenticación NTLM.\n" #: fetchmail.c:1541 msgid " OTP authentication will be forced.\n" msgstr " Se forzará autenticación OTP.\n" #: fetchmail.c:1544 msgid " CRAM-Md5 authentication will be forced.\n" msgstr " Se forzará autenticación CRAM-Md5.\n" #: fetchmail.c:1547 msgid " GSSAPI authentication will be forced.\n" msgstr " Se forzará autenticación GSSAPI.\n" #: fetchmail.c:1550 msgid " Kerberos V4 authentication will be forced.\n" msgstr " Se forzará autenticación Kerberos V4.\n" #: fetchmail.c:1553 msgid " Kerberos V5 authentication will be forced.\n" msgstr " Se forzará autenticación Kerberos V5.\n" #: fetchmail.c:1556 msgid " End-to-end encryption assumed.\n" msgstr " Se asume cifrado de un extremo a otro.\n" #: fetchmail.c:1560 #, c-format msgid " Mail service principal is: %s\n" msgstr " El principal del servicio de correo es: %s\n" #: fetchmail.c:1563 msgid " SSL encrypted sessions enabled.\n" msgstr " Sesiones encriptadas con SSL activadas.\n" #: fetchmail.c:1565 #, c-format msgid " SSL protocol: %s.\n" msgstr " Protocolo SSL: %s.\n" #: fetchmail.c:1567 msgid " SSL server certificate checking enabled.\n" msgstr " Comprobación de certificados SSL del servidor activada.\n" #: fetchmail.c:1569 #, c-format msgid " SSL trusted certificate directory: %s\n" msgstr " Directorio del certificado SSL de confianza: %s\n" #: fetchmail.c:1572 #, c-format msgid " SSL key fingerprint (checked against the server key): %s\n" msgstr "" " Huella dactilar de la llave SSL (comprobada con la llave del servidor): %" "s\n" #: fetchmail.c:1575 #, c-format msgid " Server nonresponse timeout is %d seconds" msgstr " El tiempo de espera para respuestas del servidor es de %d segundos" #: fetchmail.c:1577 msgid " (default).\n" msgstr " (por defecto).\n" #: fetchmail.c:1584 msgid " Default mailbox selected.\n" msgstr " La casilla por defecto está seleccionada.\n" #: fetchmail.c:1589 msgid " Selected mailboxes are:" msgstr " Las casillas seleccionadas son:" #: fetchmail.c:1595 msgid " All messages will be retrieved (--all on).\n" msgstr " Todos los mensajes serán recibidos (--all on).\n" #: fetchmail.c:1596 msgid " Only new messages will be retrieved (--all off).\n" msgstr " Sólo se recibirán mensajes nuevos (--all off).\n" #: fetchmail.c:1598 msgid " Fetched messages will be kept on the server (--keep on).\n" msgstr " Los mensajes recibidos permanecerán en el servidor (--keep on).\n" #: fetchmail.c:1599 msgid " Fetched messages will not be kept on the server (--keep off).\n" msgstr " Los mensajes recibidos se eliminarán del servidor (--keep off).\n" #: fetchmail.c:1601 msgid " Old messages will be flushed before message retrieval (--flush on).\n" msgstr "" " Los mensajes viejos serán eliminados antes de recibir nuevos (--flush " "on).\n" #: fetchmail.c:1602 msgid "" " Old messages will not be flushed before message retrieval (--flush off).\n" msgstr "" " No se eliminarán los mensajes viejos antes de recibir nuevos (--flush " "off).\n" #: fetchmail.c:1604 #, fuzzy msgid "" " Oversized messages will be flushed before message retrieval (--limitflush " "on).\n" msgstr "" " Los mensajes viejos serán eliminados antes de recibir nuevos (--flush " "on).\n" #: fetchmail.c:1605 #, fuzzy msgid "" " Oversized messages will not be flushed before message retrieval (--" "limitflush off).\n" msgstr "" " No se eliminarán los mensajes viejos antes de recibir nuevos (--flush " "off).\n" #: fetchmail.c:1607 msgid " Rewrite of server-local addresses is enabled (--norewrite off).\n" msgstr " Se reescribirán las direcciones locales (--norewrite off).\n" #: fetchmail.c:1608 msgid " Rewrite of server-local addresses is disabled (--norewrite on).\n" msgstr " No se reescribirán las direcciones locales (--norewrite on).\n" #: fetchmail.c:1610 msgid " Carriage-return stripping is enabled (stripcr on).\n" msgstr " Los retornos de carro serán removidos (stripcr on).\n" #: fetchmail.c:1611 msgid " Carriage-return stripping is disabled (stripcr off).\n" msgstr " No se removerán los retornos de carro (stripcr off).\n" #: fetchmail.c:1613 msgid " Carriage-return forcing is enabled (forcecr on).\n" msgstr " Se agregarán retornos de carro (forcecr on).\n" #: fetchmail.c:1614 msgid " Carriage-return forcing is disabled (forcecr off).\n" msgstr " No se agregarán retornos de carro (forcecr off).\n" #: fetchmail.c:1616 msgid "" " Interpretation of Content-Transfer-Encoding is disabled (pass8bits on).\n" msgstr "" " Se ignorará el contenido de «Content-Transfer-Encoding» (pass8bits on).\n" #: fetchmail.c:1617 msgid "" " Interpretation of Content-Transfer-Encoding is enabled (pass8bits off).\n" msgstr "" " Se respetará el contenido de «Content-Transfer-Encoding» (pass8bits off).\n" #: fetchmail.c:1619 msgid " MIME decoding is enabled (mimedecode on).\n" msgstr " La decodificación MIME está activada (mimedecode on).\n" #: fetchmail.c:1620 msgid " MIME decoding is disabled (mimedecode off).\n" msgstr " La decodificación MIME está desactivada (mimedecode off).\n" #: fetchmail.c:1622 msgid " Idle after poll is enabled (idle on).\n" msgstr " Se permanecerá a la espera tras la consulta (idle on).\n" #: fetchmail.c:1623 msgid " Idle after poll is disabled (idle off).\n" msgstr " No se permanecerá a la espera tras la consulta (idle off).\n" #: fetchmail.c:1625 msgid " Nonempty Status lines will be discarded (dropstatus on)\n" msgstr "" " Las líneas ‘Status’ que no estén vacías serán descartadas (dropstatus " "on).\n" #: fetchmail.c:1626 msgid " Nonempty Status lines will be kept (dropstatus off)\n" msgstr "" " Las líneas ‘Status’ que no estén vacías serán conservadas (dropstatus " "off).\n" #: fetchmail.c:1628 msgid " Delivered-To lines will be discarded (dropdelivered on)\n" msgstr " Las líneas ‘Delivered-To’ serán descartadas (dropdelivered on).\n" #: fetchmail.c:1629 msgid " Delivered-To lines will be kept (dropdelivered off)\n" msgstr " Las líneas ‘Delivered-To’ serán conservadas (dropdelivered off).\n" #: fetchmail.c:1633 #, c-format msgid " Message size limit is %d octets (--limit %d).\n" msgstr " El tamaño de los mensajes está limitado a %d octetos (--limit %d).\n" #: fetchmail.c:1636 msgid " No message size limit (--limit 0).\n" msgstr " El tamaño de los mensajes no está limitado (--limit 0).\n" #: fetchmail.c:1638 #, c-format msgid " Message size warning interval is %d seconds (--warnings %d).\n" msgstr "" " Los avisos sobre el tamaño de los mensajes se darán cada %d segundos (--" "warnings %d).\n" #: fetchmail.c:1641 msgid " Size warnings on every poll (--warnings 0).\n" msgstr "" " Los avisos sobre el tamaño de los mensajes se darán en cada consulta (--" "warnings 0).\n" #: fetchmail.c:1644 #, c-format msgid " Received-message limit is %d (--fetchlimit %d).\n" msgstr "" " La cantidad de mensajes recibidos está limitada a %d (--fetchlimit %d).\n" #: fetchmail.c:1647 msgid " No received-message limit (--fetchlimit 0).\n" msgstr "" " La cantidad de mensajes recibidos no está limitada (--fetchlimit 0).\n" #: fetchmail.c:1649 #, c-format msgid " Fetch message size limit is %d (--fetchsizelimit %d).\n" msgstr "" " El límite de tamaño para los mensajes recibidos es de %d (--fetchsizelimit " "%d).\n" #: fetchmail.c:1652 msgid " No fetch message size limit (--fetchsizelimit 0).\n" msgstr " El tamaño de los mensajes no está limitado (--fetchsizelimit 0).\n" #: fetchmail.c:1656 msgid " Do binary search of UIDs during each poll (--fastuidl 1).\n" msgstr "" " Utilizar búsqueda binaria de UIDs durante cada consulta (--fastuidl 1).\n" #: fetchmail.c:1658 #, c-format msgid " Do binary search of UIDs during %d out of %d polls (--fastuidl %d).\n" msgstr "" " Utilizar búsqueda binaria de UIDs durante %d de cada %d consultas (--" "fastuidl %d).\n" #: fetchmail.c:1661 msgid " Do linear search of UIDs during each poll (--fastuidl 0).\n" msgstr "" " Utilizar búsqueda lineal de UIDs durante cada conlusta (--fastuidl 0).\n" #: fetchmail.c:1663 #, c-format msgid " SMTP message batch limit is %d.\n" msgstr " El límite de mensaje por lote SMTP es %d.\n" #: fetchmail.c:1665 msgid " No SMTP message batch limit (--batchlimit 0).\n" msgstr "" " La cantidad de mensajes emitidos no está limitada (--batchlimit 0).\n" #: fetchmail.c:1669 #, c-format msgid " Deletion interval between expunges forced to %d (--expunge %d).\n" msgstr "" " El intervalo de borrado entre eliminaciones está forzado a %d (--expunge %" "d).\n" #: fetchmail.c:1671 msgid " No forced expunges (--expunge 0).\n" msgstr " No forzar eliminaciones (--expunge 0).\n" #: fetchmail.c:1678 msgid " Domains for which mail will be fetched are:" msgstr " Los dominios para los cuales se recibirá correo son:" #: fetchmail.c:1683 fetchmail.c:1703 msgid " (default)" msgstr " (por defecto)" #: fetchmail.c:1688 #, c-format msgid " Messages will be appended to %s as BSMTP\n" msgstr " Los mensajes serán anexados a %s como BSMTP\n" #: fetchmail.c:1690 #, c-format msgid " Messages will be delivered with \"%s\".\n" msgstr " Los mensajes serán entregados con “%s”.\n" #: fetchmail.c:1697 #, c-format msgid " Messages will be %cMTP-forwarded to:" msgstr " Los mensajes serán reenviados con %cMTP a:" #: fetchmail.c:1708 #, c-format msgid " Host part of MAIL FROM line will be %s\n" msgstr " El nombre de la máquina en la línea ‘MAIL FROM’ será %s\n" #: fetchmail.c:1711 #, c-format msgid " Address to be put in RCPT TO lines shipped to SMTP will be %s\n" msgstr "" " La dirección a poner en las líneas RCPT TO enviadas al STMP será %s\n" #: fetchmail.c:1720 msgid " Recognized listener spam block responses are:" msgstr " Las respuestas de servidor reconocidas como bloques de ‘spam’ son:" #: fetchmail.c:1726 msgid " Spam-blocking disabled\n" msgstr " El bloqueo de ‘spam’ está desactivado\n" #: fetchmail.c:1729 #, c-format msgid " Server connection will be brought up with \"%s\".\n" msgstr " La conexión al servidor será iniciada con “%s”.\n" #: fetchmail.c:1732 msgid " No pre-connection command.\n" msgstr " No hay comando de pre-conexión.\n" #: fetchmail.c:1734 #, c-format msgid " Server connection will be taken down with \"%s\".\n" msgstr " La conexión al servidor será terminada con “%s”.\n" #: fetchmail.c:1737 msgid " No post-connection command.\n" msgstr " No hay comando posconexión.\n" #: fetchmail.c:1740 msgid " No localnames declared for this host.\n" msgstr " No hay nombres locales declarados para esta máquina.\n" #: fetchmail.c:1750 msgid " Multi-drop mode: " msgstr " Modo ‘multi-drop’: " #: fetchmail.c:1752 msgid " Single-drop mode: " msgstr " Modo ‘single-drop’: " #: fetchmail.c:1754 #, c-format msgid "%d local name recognized.\n" msgid_plural "%d local names recognized.\n" msgstr[0] "%d nombre local reconocido.\n" msgstr[1] "%d nombres locales reconocidos.\n" #: fetchmail.c:1769 msgid " DNS lookup for multidrop addresses is enabled.\n" msgstr " Se consultará al DNS por las direcciones ‘multidrop’.\n" #: fetchmail.c:1770 msgid " DNS lookup for multidrop addresses is disabled.\n" msgstr " No se consultará al DNS por las direcciones ‘multidrop’.\n" #: fetchmail.c:1774 msgid "" " Server aliases will be compared with multidrop addresses by IP address.\n" msgstr "" " Se comparará la dirección IP de los alias del servidor contra las " "direcciones ‘multidrop’.\n" #: fetchmail.c:1776 msgid " Server aliases will be compared with multidrop addresses by name.\n" msgstr "" " Se comparará el nombre de los alias del servidor contra las direcciones " "‘multidrop’.\n" #: fetchmail.c:1779 msgid " Envelope-address routing is disabled\n" msgstr " El ruteo por la dirección de la envoltura está desactivado\n" #: fetchmail.c:1782 #, c-format msgid " Envelope header is assumed to be: %s\n" msgstr " Se asume que el encabezado de la envoltura es: %s\n" #: fetchmail.c:1785 #, fuzzy, c-format msgid " Number of envelope headers to be skipped over: %d\n" msgstr " Número del encabezado de la envoltura a ser procesado: %d\n" #: fetchmail.c:1788 #, c-format msgid " Prefix %s will be removed from user id\n" msgstr " El prefijo %s será removido del nombre de usuario\n" #: fetchmail.c:1791 msgid " No prefix stripping\n" msgstr " Ningún prefijo será removido\n" #: fetchmail.c:1798 msgid " Predeclared mailserver aliases:" msgstr " Alias predeclarados del servidor de correo:" #: fetchmail.c:1807 msgid " Local domains:" msgstr " Dominios locales:" #: fetchmail.c:1817 #, c-format msgid " Connection must be through interface %s.\n" msgstr " La conexión debe ser a través de la interfaz %s.\n" #: fetchmail.c:1819 msgid " No interface requirement specified.\n" msgstr " No se especificó alguna interfaz requerida.\n" #: fetchmail.c:1821 #, c-format msgid " Polling loop will monitor %s.\n" msgstr " El bucle de consulta monitoreará %s.\n" #: fetchmail.c:1823 msgid " No monitor interface specified.\n" msgstr " No se especificó una interfaz de monitoreo.\n" #: fetchmail.c:1827 #, c-format msgid " Server connections will be made via plugin %s (--plugin %s).\n" msgstr "" " Las conexiones al servidor se llevarán a cabo a través del ‘plugin’ %s (--" "plugin %s).\n" #: fetchmail.c:1829 msgid " No plugin command specified.\n" msgstr " No se especificó un comando para el ‘plugin’.\n" #: fetchmail.c:1831 #, c-format msgid " Listener connections will be made via plugout %s (--plugout %s).\n" msgstr "" " Las conexiones al cliente se llevarán a cabo a través del ‘plugout’ %s (--" "plugout %s).\n" #: fetchmail.c:1833 msgid " No plugout command specified.\n" msgstr " No se especificó un comando para el ‘plugout’.\n" #: fetchmail.c:1838 msgid " No UIDs saved from this host.\n" msgstr " No hay UIDs guardadas de esta máquina.\n" #: fetchmail.c:1847 #, c-format msgid " %d UIDs saved.\n" msgstr " %d UIDs guardadas.\n" #: fetchmail.c:1855 msgid " Poll trace information will be added to the Received header.\n" msgstr "" " Se agregará información de trazado sobre la consulta al encabezado " "Recibido.\n" #: fetchmail.c:1857 msgid "" " No poll trace information will be added to the Received header.\n" ".\n" msgstr "" " No se agregará información de trazado sobre la consulta al encabezado " "Recibido.\n" #: fetchmail.c:1860 #, c-format msgid " Pass-through properties \"%s\".\n" msgstr " Propiedades de paso “%s”.\n" #: getpass.c:72 msgid "ERROR: no support for getpassword() routine\n" msgstr "ERROR: no hay soporte para la rutina getpassword()\n" #: getpass.c:193 msgid "" "\n" "Caught SIGINT... bailing out.\n" msgstr "" "\n" "SIGINT recibido... abortando.\n" #: gssapi.c:66 #, c-format msgid "Couldn't get service name for [%s]\n" msgstr "No fue posible obtener el nombre de servicio para [%s]\n" #: gssapi.c:72 #, c-format msgid "Using service name [%s]\n" msgstr "Usando nombre de servicio [%s]\n" #: gssapi.c:88 msgid "Sending credentials\n" msgstr "Enviando credenciales\n" #: gssapi.c:106 msgid "Error exchanging credentials\n" msgstr "Error intercambiando credenciales\n" #: gssapi.c:151 msgid "Couldn't unwrap security level data\n" msgstr "No fue posible desenvolver los datos del nivel de seguridad\n" #: gssapi.c:156 msgid "Credential exchange complete\n" msgstr "Intercambio de credenciales completo\n" #: gssapi.c:160 msgid "Server requires integrity and/or privacy\n" msgstr "El servidor requiere integridad y/o privacidad\n" #: gssapi.c:169 #, c-format msgid "Unwrapped security level flags: %s%s%s\n" msgstr "Opciones de nivel de seguridad desenvueltas: %s%s%s\n" #: gssapi.c:173 #, c-format msgid "Maximum GSS token size is %ld\n" msgstr "El máximo tamaño del componente GSS es %ld\n" #: gssapi.c:186 msgid "Error creating security level request\n" msgstr "Error creando pedido de nivel de seguridad\n" #: gssapi.c:197 msgid "Releasing GSS credentials\n" msgstr "Largando las credenciales GSS\n" #: gssapi.c:200 msgid "Error releasing credentials\n" msgstr "Error largando las credenciales\n" #: idle.c:61 #, c-format msgid "fetchmail: thread sleeping for %d sec.\n" msgstr "fetchmail: la tarea dormirá por %d segundos\n" #: imap.c:306 msgid "Protocol identified as IMAP4 rev 1\n" msgstr "Protocolo identificado como IMAP4 rev 1\n" #: imap.c:312 msgid "Protocol identified as IMAP4 rev 0\n" msgstr "Protocolo identificado como IMAP4 rev 0\n" #: imap.c:319 msgid "Protocol identified as IMAP2 or IMAP2BIS\n" msgstr "Protocolo identificado como IMAP2 o IMAP2BIS\n" #: imap.c:334 msgid "will idle after poll\n" msgstr "descansará después de inquirir\n" #: imap.c:490 msgid "Required OTP capability not compiled into fetchmail\n" msgstr "La capacidad OTP requerida no fue compilada en fetchmail\n" #: imap.c:512 pop3.c:341 msgid "Required NTLM capability not compiled into fetchmail\n" msgstr "La capacidad NTLM requerida no fue compilada en fetchmail\n" #: imap.c:521 msgid "Required LOGIN capability not supported by server\n" msgstr "La capacidad LOGIN requerida no es soportada por el servidor\n" #: imap.c:682 imap.c:715 msgid "re-poll failed\n" msgstr "falló el reintento de consulta\n" #: imap.c:690 #, c-format msgid "%d message waiting after re-poll\n" msgid_plural "%d messages waiting after re-poll\n" msgstr[0] "Queda %d mensaje esperando tras reintentar la consulta\n" msgstr[1] "Quedan %d mensajes esperando tras reintentar la consulta\n" #: imap.c:702 msgid "mailbox selection failed\n" msgstr "falló la selección de casilla\n" #: imap.c:706 #, c-format msgid "%d message waiting after first poll\n" msgid_plural "%d messages waiting after first poll\n" msgstr[0] "Queda %d mensaje esperando tras la consulta inicial\n" msgstr[1] "Quedan %d mensajes esperando tras la consulta inicial\n" #: imap.c:730 msgid "expunge failed\n" msgstr "falló la eliminación\n" #: imap.c:734 #, c-format msgid "%d message waiting after expunge\n" msgid_plural "%d messages waiting after expunge\n" msgstr[0] "Queda %d mensaje esperando tras la eliminación\n" msgstr[1] "Quedan %d mensajes esperando tras la eliminación\n" #: imap.c:759 msgid "search for unseen messages failed\n" msgstr "la búsqueda de mensajes no visto falló\n" #: imap.c:789 pop3.c:723 pop3.c:735 pop3.c:957 pop3.c:964 #, c-format msgid "%u is unseen\n" msgstr "%u no fue visto\n" #: imap.c:801 pop3.c:744 #, c-format msgid "%u is first unseen\n" msgstr "%u es el primero que no fue visto\n" #: imap.c:892 msgid "" "Warning: ignoring bogus data for message sizes returned by the server.\n" msgstr "" #: interface.c:256 msgid "Unable to open kvm interface. Make sure fetchmail is SGID kmem." msgstr "" "No es posible abrir la interfaz kvm. Asegúrese de que fetchmail este SGID " "kmem." #: interface.c:396 #, c-format msgid "Unable to parse interface name from %s" msgstr "Incapaz de interpretar el nombre de la interfaz a partir de %s" #: interface.c:418 msgid "get_ifinfo: sysctl (iflist estimate) failed" msgstr "get_ifinfo: sysctl (estimar lista de interfaces) falló" #: interface.c:424 msgid "get_ifinfo: malloc failed" msgstr "get_ifinfo: malloc falló" #: interface.c:430 msgid "get_ifinfo: sysctl (iflist) failed" msgstr "get_ifinfo: sysctl (lista de interfaces) falló" #: interface.c:448 #, c-format msgid "Routing message version %d not understood." msgstr "No se entendió el mensaje de ruteo versión %d." #: interface.c:480 #, c-format msgid "No interface found with name %s" msgstr "No se encontró una interfaz con el nombre %s" #: interface.c:538 #, c-format msgid "No IP address found for %s" msgstr "No se encontró dirección IP para %s" #: interface.c:589 msgid "missing IP interface address\n" msgstr "falta la dirección IP de la interfaz\n" #: interface.c:605 msgid "invalid IP interface address\n" msgstr "la dirección IP de la interfaz es inválida\n" #: interface.c:611 msgid "invalid IP interface mask\n" msgstr "la máscara IP de la interfaz es inválida\n" #: interface.c:650 #, c-format msgid "activity on %s -noted- as %d\n" msgstr "actividad en %s -vista- como %d\n" #: interface.c:665 #, c-format msgid "skipping poll of %s, %s down\n" msgstr "no se consulta %s, %s desactivada\n" #: interface.c:684 #, c-format msgid "skipping poll of %s, %s IP address excluded\n" msgstr "no se consulta %s, la dirección IP de %s fue excluida\n" #: interface.c:696 #, c-format msgid "activity on %s checked as %d\n" msgstr "actividad en %s verificada como %d\n" #: interface.c:722 #, c-format msgid "skipping poll of %s, %s inactive\n" msgstr "no se consulta %s, %s inactiva\n" #: interface.c:729 #, c-format msgid "activity on %s was %d, is %d\n" msgstr "la actividad en %s era %d, es %d\n" #: kerberos.c:74 msgid "could not decode initial BASE64 challenge\n" msgstr "no fue posible decodificar el desafío BASE64 inicial\n" #: kerberos.c:139 #, c-format msgid "principal %s in ticket does not match -u %s\n" msgstr "%s principal en el ‘ticket’ no coincide con -u %s\n" #: kerberos.c:147 #, c-format msgid "non-null instance (%s) might cause strange behavior\n" msgstr "La instancia no-nula (%s) puede causar comportamiento extraño\n" #: kerberos.c:213 msgid "could not decode BASE64 ready response\n" msgstr "no fue posible decodificar la respuesta BASE64 ‘ready’\n" #: kerberos.c:220 msgid "challenge mismatch\n" msgstr "desafío no coincidente\n" #: lock.c:77 #, c-format msgid "fetchmail: error reading lockfile \"%s\": %s\n" msgstr "fetchmail: error leyendo el archivo de bloqueo \"%s\": %s\n" #: lock.c:89 msgid "fetchmail: removing stale lockfile\n" msgstr "fetchmail: removiendo archivo de bloqueo viejo\n" #: lock.c:96 #, c-format msgid "fetchmail: error opening lockfile \"%s\": %s\n" msgstr "fetchmail: error abriendo archivo de bloqueo \"%s\": %s\n" #: lock.c:137 msgid "fetchmail: lock creation failed.\n" msgstr "fetchmail: falló la creación del bloqueo.\n" #: netrc.c:220 #, c-format msgid "%s:%d: warning: found \"%s\" before any host names\n" msgstr "" "%s:%d: cuidado: “%s” encontrado antes que cualquier nombre de máquina\n" #: netrc.c:258 #, c-format msgid "%s:%d: warning: unknown token \"%s\"\n" msgstr "%s:%d: cuidado: el componente “%s” es desconocido\n" #: odmr.c:64 #, c-format msgid "%s's SMTP listener does not support ATRN\n" msgstr "El SMTP de %s no soporta ATRN\n" #: odmr.c:102 msgid "Turnaround now...\n" msgstr "Date vuelta ahora...\n" #: odmr.c:107 msgid "ATRN request refused.\n" msgstr "Pedido ATRN rechazado.\n" #: odmr.c:111 msgid "Unable to process ATRN request now\n" msgstr "No es posible procesar el pedido ATRN\n" #: odmr.c:116 msgid "You have no mail.\n" msgstr "No tenés correo.\n" #: odmr.c:120 msgid "Command not implemented\n" msgstr "Comando no implementado\n" #: odmr.c:124 msgid "Authentication required.\n" msgstr "Autenticación requerida.\n" #: odmr.c:128 #, c-format msgid "Unknown ODMR error %d\n" msgstr "Error ODMR desconocido %d\n" #: odmr.c:187 msgid "receiving message data\n" msgstr "recibiendo datos del mensaje\n" #: odmr.c:240 msgid "Option --keep is not supported with ODMR\n" msgstr "La opción --keep no es soportada con ODMR\n" #: odmr.c:244 msgid "Option --flush is not supported with ODMR\n" msgstr "La opción --flush no es soportada con ODMR\n" #: odmr.c:248 #, fuzzy msgid "Option --folder is not supported with ODMR\n" msgstr "La opción --flush no es soportada con ODMR\n" #: odmr.c:252 msgid "Option --check is not supported with ODMR\n" msgstr "La opción --check no es soportada con ODMR\n" #: opie.c:36 msgid "server recv fatal\n" msgstr "fatal recv del server\n" #: opie.c:50 msgid "Could not decode OTP challenge\n" msgstr "No fue posible decodificar el desafío OTP\n" #: opie.c:58 pop3.c:515 msgid "Secret pass phrase: " msgstr "Frase clave secreta: " #: options.c:161 options.c:205 #, c-format msgid "String '%s' is not a valid number string.\n" msgstr "La cadena '%s' no es un cadena de números válida.\n" #: options.c:170 #, c-format msgid "Value of string '%s' is %s than %d.\n" msgstr "El valor de la cadena '%s' es %s que %d.\n" #: options.c:171 msgid "smaller" msgstr "menor" #: options.c:171 msgid "larger" msgstr "mayor" #: options.c:330 #, c-format msgid "Invalid protocol `%s' specified.\n" msgstr "El protocolo ‘%s’ especificado es inválido.\n" #: options.c:372 #, c-format msgid "Invalid authentication `%s' specified.\n" msgstr "Fue especificada una autenticación ‘%s’ inválida.\n" #: options.c:573 msgid "usage: fetchmail [options] [server ...]\n" msgstr "uso: fetchmail [opciones] [servidor ...]\n" #: options.c:574 msgid " Options are as follows:\n" msgstr " Las opciones son las siguientes:\n" #: options.c:575 msgid " -?, --help display this option help\n" msgstr " -?, --help muestra esta ayuda\n" #: options.c:576 msgid " -V, --version display version info\n" msgstr " -V, --version muestra información sobre la versión\n" #: options.c:578 msgid " -c, --check check for messages without fetching\n" msgstr " -c, --check verifica si hay mensajes sin recibirlos\n" #: options.c:579 msgid " -s, --silent work silently\n" msgstr " -s, --silent trabajar silenciosamente\n" #: options.c:580 msgid " -v, --verbose work noisily (diagnostic output)\n" msgstr "" " -v, --verbose trabajar ruidosamente (información de diagnóstico)\n" #: options.c:581 msgid " -d, --daemon run as a daemon once per n seconds\n" msgstr "" " -d, --daemon correr en segundo plano y activarse una vez cada n " "segundos\n" #: options.c:582 msgid " -N, --nodetach don't detach daemon process\n" msgstr " -N, --nodetach no lanzar un proceso en segundo plano\n" #: options.c:583 msgid " -q, --quit kill daemon process\n" msgstr " -q, --quit terminar el proceso en segundo plano\n" #: options.c:584 msgid " -L, --logfile specify logfile name\n" msgstr " -L, --logfile especificar el nombre del archivo de registro\n" #: options.c:585 msgid "" " --syslog use syslog(3) for most messages when running as a " "daemon\n" msgstr "" " --syslog usar syslog(3) para la mayoría de los mensajes cuando se " "ejecuta en segundo plano\n" #: options.c:586 msgid " --invisible don't write Received & enable host spoofing\n" msgstr "" " --invisible no escribir ‘Received’ y activar falsificación de " "máquina\n" #: options.c:587 msgid " -f, --fetchmailrc specify alternate run control file\n" msgstr "" " -f, --fetchmailrc especificar archivo de control de ejecución alterno\n" #: options.c:588 msgid " -i, --idfile specify alternate UIDs file\n" msgstr " -i, --idfile especificar archivo de UIDs alterno\n" #: options.c:589 msgid " --postmaster specify recipient of last resort\n" msgstr " --postmaster especificar el recipiente de último recurso\n" #: options.c:590 msgid " --nobounce redirect bounces from user to postmaster.\n" msgstr " --nobounce redirigir rebotes del usuario al postmaster.\n" #: options.c:592 msgid " -I, --interface interface required specification\n" msgstr " -I, --interface especificación de interfaz requerida\n" #: options.c:593 msgid " -M, --monitor monitor interface for activity\n" msgstr " -M, --monitor monitorear interfaz por actividad\n" #: options.c:596 msgid " --ssl enable ssl encrypted session\n" msgstr " --ssl activar sesión encriptada con ssl\n" #: options.c:597 msgid " --sslkey ssl private key file\n" msgstr " --sslkey archivo de llave privada ssl\n" #: options.c:598 msgid " --sslcert ssl client certificate\n" msgstr " --sslcert certificado ssl del cliente\n" #: options.c:599 msgid " --sslcertpath path to ssl certificates\n" msgstr " --sslcertpath ubicación de los certificados ssl\n" #: options.c:600 msgid "" " --sslfingerprint fingerprint that must match that of the server's " "cert.\n" msgstr "" " --sslfingerprint huella digital que debe coincidir con la del " "certificado del servidor.\n" #: options.c:601 msgid " --sslproto force ssl protocol (ssl2/ssl3/tls1)\n" msgstr " --sslproto forzar protocolo ssl (ssl2/ssl3/tls1)\n" #: options.c:603 msgid " --plugin specify external command to open connection\n" msgstr "" " --plugin especificar el comando externo para abrir una conexión\n" #: options.c:604 msgid " --plugout specify external command to open smtp connection\n" msgstr "" " --plugout especificar el comando externo para abrir una conexión " "smtp\n" #: options.c:606 msgid " -p, --protocol specify retrieval protocol (see man page)\n" msgstr "" " -p, --protocol especificar el protocolo de recepción (ver página man)\n" #: options.c:607 msgid " -U, --uidl force the use of UIDLs (pop3 only)\n" msgstr " -U, --uidl forzar el uso de UIDLs (sólo pop3)\n" #: options.c:608 #, fuzzy msgid " --port TCP port to connect to (obsolete, use --service)\n" msgstr " -P, --port puerto TCP/IP al cual conectarse\n" #: options.c:609 #, fuzzy msgid "" " -P, --service TCP service to connect to (can be numeric TCP port)\n" msgstr " -P, --port puerto TCP/IP al cual conectarse\n" #: options.c:610 msgid " --auth authentication type (password/kerberos/ssh/otp)\n" msgstr " --auth tipo de autenticación (clave/kerberos/ssh/otp)\n" #: options.c:611 msgid " -t, --timeout server nonresponse timeout\n" msgstr " -t, --timeout tiempo de espera por respuesta del servidor\n" #: options.c:612 msgid " -E, --envelope envelope address header\n" msgstr " -E, --envelope envolver encabezados de dirección\n" #: options.c:613 msgid " -Q, --qvirtual prefix to remove from local user id\n" msgstr "" " -Q, --qvirtual prefijo a remover de la identificación local del " "usuario\n" #: options.c:614 msgid " --principal mail service principal\n" msgstr " --principal servicio de correo principal\n" #: options.c:615 msgid " --tracepolls add poll-tracing information to Received header\n" msgstr "" " --tracepolls añadir información sobre trazado de consultas al " "encabezado Recibido\n" #: options.c:617 msgid " -u, --username specify users's login on server\n" msgstr "" " -u, --username especificar el ‘login’ del usuario en el servidor\n" #: options.c:618 msgid " -a, --all retrieve old and new messages\n" msgstr " -a, --all recibir mensajes viejos y nuevos\n" #: options.c:619 msgid " -K, --nokeep delete new messages after retrieval\n" msgstr " -K, --nokeep borrar nuevos mensajes luego de recibidos\n" #: options.c:620 msgid " -k, --keep save new messages after retrieval\n" msgstr " -k, --keep guardar nuevos mensajes luego de recibidos\n" #: options.c:621 msgid " -F, --flush delete old messages from server\n" msgstr " -F, --flush borrar viejos mensajes del servidor\n" #: options.c:622 #, fuzzy msgid " --limitflush delete oversized messages\n" msgstr " -F, --flush borrar viejos mensajes del servidor\n" #: options.c:623 msgid " -n, --norewrite don't rewrite header addresses\n" msgstr " -n, --norewrite no reescribir las direcciones del encabezado\n" #: options.c:624 msgid " -l, --limit don't fetch messages over given size\n" msgstr "" " -l, --limit no recibir los mensajes más largos que lo especificado\n" #: options.c:625 msgid " -w, --warnings interval between warning mail notification\n" msgstr " -w, --warnings intervalo entre las notificaciones de correo\n" #: options.c:627 msgid " -S, --smtphost set SMTP forwarding host\n" msgstr " -S, --smtphost configurar la máquina de reenvío de SMTP\n" #: options.c:628 msgid " --fetchdomains fetch mail for specified domains\n" msgstr " --fetchdomains recibir correo para los dominios especificados\n" #: options.c:629 msgid " -D, --smtpaddress set SMTP delivery domain to use\n" msgstr " -D, --smtpaddress configurar el dominio de entrega de SMTP a usar\n" #: options.c:630 msgid " --smtpname set SMTP full name username@domain\n" msgstr "" " --smtpname usar nombreusuario@dominio como nombre completo para " "SMTP\n" #: options.c:631 msgid " -Z, --antispam, set antispam response values\n" msgstr " -Z, --antispam configurar los valores de respuesta anti‘spam’\n" #: options.c:632 msgid " -b, --batchlimit set batch limit for SMTP connections\n" msgstr "" " -b, --batchlimit configurar el límite de mensajes para las conexiones " "SMTP\n" #: options.c:633 msgid " -B, --fetchlimit set fetch limit for server connections\n" msgstr "" " -B, --fetchlimit configurar el límite de mensajes para las conexiones al " "servidor\n" #: options.c:634 msgid " --fetchsizelimit set fetch message size limit\n" msgstr " --fetchsizelimit configurar el límite de tamaño de mensaje\n" #: options.c:635 msgid " --fastuidl do a binary search for UIDLs\n" msgstr " --fastuidl utilizar búsqueda binaria para los UIDLs\n" #: options.c:636 msgid " -e, --expunge set max deletions between expunges\n" msgstr "" " -e, --expunge configurar la cantidad de mensajes borrados entre " "eliminaciones\n" #: options.c:637 msgid " -m, --mda set MDA to use for forwarding\n" msgstr " -m, --mda configurar el MDA para que reenvíe\n" #: options.c:638 msgid " --bsmtp set output BSMTP file\n" msgstr " --bsmtp configurar archivo de salida de BSMTP\n" #: options.c:639 msgid " --lmtp use LMTP (RFC2033) for delivery\n" msgstr " --lmtp usar LMTP (RFC2033) para entrega\n" #: options.c:640 msgid " -r, --folder specify remote folder name\n" msgstr " -r, --folder especificar nombre de la carpeta remota\n" #: options.c:641 msgid " --showdots show progress dots even in logfiles\n" msgstr "" " --showdots mostrar puntos de progreso incluso en los archivos de " "registro\n" #: pop3.c:553 msgid "Required APOP timestamp not found in greeting\n" msgstr "Estampa de tiempo APOP requerida no encontrada en el saludo\n" #: pop3.c:562 msgid "Timestamp syntax error in greeting\n" msgstr "Error de sintaxis en la estampa de tiempo en el saludo\n" #: pop3.c:584 msgid "Undefined protocol request in POP3_auth\n" msgstr "Pedido de protocolo indefinido en POP3_auth\n" #: pop3.c:592 msgid "lock busy! Is another session active?\n" msgstr "¡bloqueo ocupado! ¿Hay otra sesión activa?\n" #: pop3.c:664 msgid "Cannot handle UIDL response from upstream server.\n" msgstr "No se puede manejar la respuesta UIDL proveniente del servidor.\n" #: pop3.c:687 msgid "Server responded with UID for wrong message.\n" msgstr "El servidor devolvió el UID de un mensaje incorrecto.\n" #: pop3.c:714 pop3.c:948 #, c-format msgid "id=%s (num=%d) was deleted, but is still present!\n" msgstr "id=%s (num=%d) fue borrado, ¡pero aún se encuentra presente!\n" #: pop3.c:816 msgid "Messages inserted into list on server. Cannot handle this.\n" msgstr "" "Mensajes insertados en una lista en el servidor. No se puede manejar esto.\n" #: pop3.c:902 msgid "protocol error\n" msgstr "error de protocolo\n" #: pop3.c:917 msgid "protocol error while fetching UIDLs\n" msgstr "error de protocolo durante la recepción de UIDLs\n" #: pop3.c:1276 #, fuzzy msgid "Option --folder is not supported with POP3\n" msgstr "La opción --remote no es soportada con POP3\n" #: rcfile_y.y:123 msgid "server option after user options" msgstr "opciones de servidor tras opciones de usuario" #: rcfile_y.y:166 msgid "SDPS not enabled." msgstr "SDPS no activado." #: rcfile_y.y:212 msgid "" "fetchmail: interface option is only supported under Linux (without IPv6) and " "FreeBSD\n" msgstr "" "fetchmail: la opción ‘interface’ solo es soportada bajo Linux (sin IPv6) y " "FreeBSD\n" #: rcfile_y.y:219 msgid "" "fetchmail: monitor option is only supported under Linux (without IPv6) and " "FreeBSD\n" msgstr "" "fetchmail: la opción ‘monitor’ solo es soportada bajo Linux (sin IPv6) y " "FreeBSD\n" #: rcfile_y.y:332 msgid "SSL is not enabled" msgstr "SSL no está activado" #: rcfile_y.y:381 msgid "end of input" msgstr "fin de entradas" #: rcfile_y.y:418 #, c-format msgid "File %s must be a regular file.\n" msgstr "El archivo %s debe ser de tipo normal.\n" #: rcfile_y.y:428 #, c-format msgid "File %s must have no more than -rwx--x--- (0710) permissions.\n" msgstr "El archivo %s no debe tener mas que los permisos -rwx--x--- (0710).\n" #: rcfile_y.y:440 #, c-format msgid "File %s must be owned by you.\n" msgstr "El archivo %s debe ser poseido por usted.\n" #: report.c:77 msgid "Unknown system error" msgstr "Error de sistema desconocido" #: report.c:104 #, c-format msgid "%s (log message incomplete)" msgstr "%s (mensaje de registro incompleto)" #: rfc822.c:76 #, c-format msgid "About to rewrite %s" msgstr "A punto de re-escribir %s" #: rfc822.c:212 #, c-format msgid "Rewritten version is %s\n" msgstr "La versión re-escrita es %s\n" #: rpa.c:117 msgid "Success" msgstr "Éxito" #: rpa.c:118 msgid "Restricted user (something wrong with account)" msgstr "Usuario restringido (hay un problema con la cuenta)" #: rpa.c:119 msgid "Invalid userid or passphrase" msgstr "Nombre de usuario o contraseña inválidos" #: rpa.c:120 msgid "Deity error" msgstr "Error en deidad" #: rpa.c:173 msgid "RPA token 2: Base64 decode error\n" msgstr "Componente RPA 2: error de decodificación Base64\n" #: rpa.c:184 #, c-format msgid "Service chose RPA version %d.%d\n" msgstr "El servicio eligió RPA versión %d.%d\n" #: rpa.c:190 #, c-format msgid "Service challenge (l=%d):\n" msgstr "Desafío del servicio (l=%d):\n" #: rpa.c:199 #, c-format msgid "Service timestamp %s\n" msgstr "Estampa de tiempo del servicio %s\n" #: rpa.c:204 msgid "RPA token 2 length error\n" msgstr "Error de largo en el componente RPA 2\n" #: rpa.c:208 #, c-format msgid "Realm list: %s\n" msgstr "Lista de dominios: %s\n" #: rpa.c:212 msgid "RPA error in service@realm string\n" msgstr "Error de RPA en la cadena servicio@dominio\n" #: rpa.c:249 msgid "RPA token 4: Base64 decode error\n" msgstr "Componente RPA 4: error de decodificación\n" #: rpa.c:260 #, c-format msgid "User authentication (l=%d):\n" msgstr "Autenticación de usuario (l=%d):\n" #: rpa.c:274 #, c-format msgid "RPA status: %02X\n" msgstr "Estado RPA: %02X\n" #: rpa.c:280 msgid "RPA token 4 length error\n" msgstr "Error de largo en el componente RPA 4\n" #: rpa.c:287 #, c-format msgid "RPA rejects you: %s\n" msgstr "RPA lo rechaza: %s\n" #: rpa.c:289 msgid "RPA rejects you, reason unknown\n" msgstr "RPA lo rechaza, razón desconocida\n" #: rpa.c:297 #, c-format msgid "RPA User Authentication length error: %d\n" msgstr "Error de largo en la Autenticación de Usuario RPA: %d\n" #: rpa.c:302 #, c-format msgid "RPA Session key length error: %d\n" msgstr "Error de largo en la llave de sesión RPA: %d\n" #: rpa.c:308 msgid "RPA _service_ auth fail. Spoof server?\n" msgstr "Fallo en la autenticación del _servicio_ RPA. ¿Servidor falso?\n" #: rpa.c:313 msgid "Session key established:\n" msgstr "Llave de sesión establecida:\n" #: rpa.c:344 msgid "RPA authorisation complete\n" msgstr "Autorización RPA completa\n" #: rpa.c:373 msgid "Get response\n" msgstr "Obtener respuesta\n" #: rpa.c:403 #, c-format msgid "Get response return %d [%s]\n" msgstr "Obtener respuesta %d [%s]\n" #: rpa.c:466 msgid "Hdr not 60\n" msgstr "Encabezado no es 60\n" #: rpa.c:487 msgid "Token length error\n" msgstr "Error de largo en el componente\n" #: rpa.c:492 #, c-format msgid "Token Length %d disagrees with rxlen %d\n" msgstr "El largo %d del componente no está de acuerdo con rxlen %d\n" #: rpa.c:498 msgid "Mechanism field incorrect\n" msgstr "Campo del mecanismo incorrecto\n" #: rpa.c:535 #, c-format msgid "dec64 error at char %d: %x\n" msgstr "Error de dec64 en el caracter %d: %x\n" #: rpa.c:550 msgid "Inbound binary data:\n" msgstr "Datos binarios entrandes:\n" #: rpa.c:588 msgid "Outbound data:\n" msgstr "Datos salientes:\n" #: rpa.c:651 msgid "RPA String too long\n" msgstr "Cadena RPA muy larga\n" #: rpa.c:656 msgid "Unicode:\n" msgstr "Unicode:\n" #: rpa.c:715 msgid "RPA Failed open of /dev/urandom. This shouldn't\n" msgstr "RPA falló abriendo /dev/urandom. Esto no debería\n" #: rpa.c:716 msgid " prevent you logging in, but means you\n" msgstr " prevenir su ingreso, pero significa que\n" #: rpa.c:717 msgid " cannot be sure you are talking to the\n" msgstr " no se puede estar seguro de estar hablando\n" #: rpa.c:718 msgid " service that you think you are (replay\n" msgstr " a el servicio que usted cree (son posibles\n" #: rpa.c:719 msgid " attacks by a dishonest service are possible.)\n" msgstr " ataques de reintento por un servicio deshonesto).\n" #: rpa.c:730 msgid "User challenge:\n" msgstr "Desafío de usuario:\n" #: rpa.c:883 msgid "MD5 being applied to data block:\n" msgstr "Aplicando MD5 al bloque de datos:\n" #: rpa.c:896 msgid "MD5 result is: \n" msgstr "El resultado de MD5 es: \n" #: servport.c:52 #, fuzzy, c-format msgid "getaddrinfo(NULL, \"%s\") error: %s\n" msgstr "fetchmail: getaddrinfo(%s.%s)\n" #: servport.c:78 #, c-format msgid "Cannot resolve service %s to port number.\n" msgstr "" #: servport.c:79 msgid "Please specify the service as decimal port number.\n" msgstr "" #: sink.c:223 #, c-format msgid "forwarding to %s\n" msgstr "reenviando a %s\n" #: sink.c:311 msgid "SMTP: (bounce-message body)\n" msgstr "SMTP: (cuerpo de mensaje de rebote)\n" #: sink.c:314 #, c-format msgid "mail from %s bounced to %s\n" msgstr "correo de %s rebotado a %s\n" #: sink.c:446 #, c-format msgid "Saved error is still %d\n" msgstr "El error guardado es aún %d\n" #: sink.c:506 sink.c:590 #, c-format msgid "%cMTP error: %s\n" msgstr "Error de %cMTP: %s\n" #: sink.c:751 msgid "BSMTP file open or preamble write failed\n" msgstr "" "Fallo en la apertura del archivo de BSMTP o en la escritura del preámbulo\n" #: sink.c:964 #, c-format msgid "%cMTP listener doesn't like recipient address `%s'\n" msgstr "Al servidor %cMTP no le gusta la dirección de recipiente ‘%s’\n" #: sink.c:971 #, c-format msgid "%cMTP listener doesn't really like recipient address `%s'\n" msgstr "" "Al servidor %cMTP realmente no le gusta la dirección de recipiente ‘%s’\n" #: sink.c:1012 msgid "no address matches; no postmaster set.\n" msgstr "no hay direcciones coincidentes; no se configuró un postmaster.\n" #: sink.c:1024 #, c-format msgid "can't even send to %s!\n" msgstr "¡ni siquiera es posible enviar a %s!\n" #: sink.c:1030 #, c-format msgid "no address matches; forwarding to %s.\n" msgstr "no hay direcciones coincidentes; reenviando a %s.\n" #: sink.c:1184 #, c-format msgid "about to deliver with: %s\n" msgstr "a punto de entregar con: %s\n" #: sink.c:1208 msgid "MDA open failed\n" msgstr "Fallo en la apertura de MDA\n" #: sink.c:1245 #, c-format msgid "%cMTP connect to %s failed\n" msgstr "Fallo en la conexión de %cMTP a %s\n" #: sink.c:1269 #, c-format msgid "can't raise the listener; falling back to %s" msgstr "no se puede despertar al servidor; recurriendo a %s" #: sink.c:1325 #, c-format msgid "MDA died of signal %d\n" msgstr "El MDA murió por la señal %d\n" #: sink.c:1328 #, c-format msgid "MDA returned nonzero status %d\n" msgstr "El MDA devolvió un estado distinto a cero %d\n" #: sink.c:1331 #, c-format msgid "Strange: MDA pclose returned %d, cannot handle at %s:%d\n" msgstr "Extraño: pclose del MDA devolvió %d, no se puede manejar en %s:%d\n" #: sink.c:1352 msgid "Message termination or close of BSMTP file failed\n" msgstr "Fallo la terminación del mensaje o el cerrado de BSMTP\n" #: sink.c:1373 msgid "SMTP listener refused delivery\n" msgstr "El servidor SMTP rechazó la entrega\n" #: sink.c:1403 msgid "LMTP delivery error on EOM\n" msgstr "Error de entrega de LMTP en EOM\n" #: sink.c:1406 #, c-format msgid "Unexpected non-503 response to LMTP EOM: %s\n" msgstr "Respuesta diferente a 503 no esperada a LMTP EOM: %s\n" #: sink.c:1560 msgid "" "-- \n" "The Fetchmail Daemon" msgstr "" "-- \n" "El Daemon Fetchmail" #: smtp.c:87 msgid "ESMTP CRAM-MD5 Authentication...\n" msgstr "Autenticación ESMTP CRAM-MD5...\n" #: smtp.c:94 smtp.c:145 msgid "Server rejected the AUTH command.\n" msgstr "El servidor rechazó el comando AUTH.\n" #: smtp.c:102 smtp.c:152 smtp.c:162 smtp.c:168 msgid "Bad base64 reply from server.\n" msgstr "Mala respuesta base64 del server.\n" #: smtp.c:106 #, c-format msgid "Challenge decoded: %s\n" msgstr "Desafío decodificado: %s\n" #: smtp.c:123 msgid "ESMTP PLAIN Authentication...\n" msgstr "Autenticación ESMTP PLAIN...\n" #: smtp.c:138 msgid "ESMTP LOGIN Authentication...\n" msgstr "Autenticación ESMTP LOGIN...\n" #: smtp.c:339 smtp.c:362 msgid "smtp listener protocol error\n" msgstr "error de protocolo en el servidor smtp\n" #: socket.c:114 socket.c:140 msgid "fetchmail: malloc failed\n" msgstr "fetchmail: malloc falló\n" #: socket.c:172 msgid "fetchmail: socketpair failed\n" msgstr "fetchmail: par de sockets falló\n" #: socket.c:178 msgid "fetchmail: fork failed\n" msgstr "fetchmail: fork falló\n" #: socket.c:185 msgid "dup2 failed\n" msgstr "dup2 falló\n" #: socket.c:191 #, c-format msgid "running %s (host %s service %s)\n" msgstr "ejecutando %s (anfitrión %s servicio %s)\n" #: socket.c:194 #, c-format msgid "execvp(%s) failed\n" msgstr "execvp(%s) falló\n" #: socket.c:281 #, fuzzy, c-format msgid "getaddrinfo(\"%s\",\"%s\") error: %s\n" msgstr "fetchmail: getaddrinfo(%s.%s)\n" #: socket.c:284 msgid "Try adding the --service option (see also FAQ item R12).\n" msgstr "" #: socket.c:626 #, c-format msgid "Issuer Organization: %s\n" msgstr "Organización emisora: %s\n" #: socket.c:628 msgid "Warning: Issuer Organization Name too long (possibly truncated).\n" msgstr "" "Cuidado: el Nombre de la Organización emisora es muy largo (posiblemente " "truncado).\n" #: socket.c:630 msgid "Unknown Organization\n" msgstr "Organización Desconocida\n" #: socket.c:632 #, c-format msgid "Issuer CommonName: %s\n" msgstr "‘CommonName’ del emisor: %s\n" #: socket.c:634 msgid "Warning: Issuer CommonName too long (possibly truncated).\n" msgstr "" "Cuidado: el ‘CommonName’ del emisor es muy largo (posiblemente truncado).\n" #: socket.c:636 msgid "Unknown Issuer CommonName\n" msgstr "‘CommonName’ del emisor desconocido\n" #: socket.c:640 #, c-format msgid "Server CommonName: %s\n" msgstr "‘CommonName’ del servidor: %s\n" #: socket.c:644 msgid "Bad certificate: Subject CommonName too long!\n" msgstr "Certificado malo: el ‘CommonName’ del sujeto es muy largo!\n" #: socket.c:690 #, c-format msgid "Server CommonName mismatch: %s != %s\n" msgstr "‘CommonName’ del Servidor no coincide: %s != %s\n" #: socket.c:696 msgid "Server name not set, could not verify certificate!\n" msgstr "" "El nombre de servidor no fue configurado, ¡no fue posible verificar el " "certificado!\n" #: socket.c:701 msgid "Unknown Server CommonName\n" msgstr "‘CommonName’ del Servidor desconocido\n" #: socket.c:703 msgid "Server name not specified in certificate!\n" msgstr "¡No se especifica el nombre del servidor en el certificado!\n" #: socket.c:713 msgid "EVP_md5() failed!\n" msgstr "EVP_md5() falló\n" #: socket.c:717 msgid "Out of memory!\n" msgstr "¡No hay memoria!\n" #: socket.c:725 msgid "Digest text buffer too small!\n" msgstr "¡El espacio para el resumen de texto es muy chico!\n" #: socket.c:731 #, c-format msgid "%s key fingerprint: %s\n" msgstr "Huella digital de la llave %s: %s\n" #: socket.c:735 #, c-format msgid "%s fingerprints match.\n" msgstr "Las huellas digitales de %s coinciden.\n" #: socket.c:738 #, c-format msgid "%s fingerprints do not match!\n" msgstr "¡Las huellas digitales de %s no coinciden!\n" #: socket.c:747 #, c-format msgid "Server certificate verification error: %s\n" msgstr "Falló la verificación del certificado del servidor: %s\n" #: socket.c:753 #, c-format msgid "unknown issuer (first %d characters): %s\n" msgstr "Emisor desconocido (primeros %d caracteres): %s\n" #: socket.c:805 msgid "File descriptor out of range for SSL" msgstr "Descriptor de archivo fuera de rango para SSL" #: socket.c:822 #, c-format msgid "Invalid SSL protocol '%s' specified, using default (SSLv23).\n" msgstr "" "El protocolo SSL ‘%s’ especificado es inválido, usando el defecto (SSLv23).\n" #: socket.c:885 msgid "Certificate/fingerprint verification was somehow skipped!\n" msgstr "" "¡La verificación de certificado/huella digital fue de algún modo saltada!\n" #: socket.c:959 msgid "Cygwin socket read retry\n" msgstr "Reintento de lectura del ‘socket’ cygwin\n" #: socket.c:962 msgid "Cygwin socket read retry failed!\n" msgstr "¡Falló el reintento de lectura del ‘socket’ cygwin\n" #: transact.c:74 #, c-format msgid "mapped %s to local %s\n" msgstr "%s mapeado al local %s\n" #: transact.c:138 #, c-format msgid "passed through %s matching %s\n" msgstr "se atravesó %s coincidiendo con %s\n" #: transact.c:207 #, c-format msgid "" "analyzing Received line:\n" "%s" msgstr "" "analizando línea ‘Received’:\n" "%s" #: transact.c:246 #, c-format msgid "line accepted, %s is an alias of the mailserver\n" msgstr "línea aceptada, %s es un alias del servidor de correo\n" #: transact.c:252 #, c-format msgid "line rejected, %s is not an alias of the mailserver\n" msgstr "línea rechazada, %s no es un alias del servidor de correo\n" #: transact.c:326 msgid "no Received address found\n" msgstr "no se encontró dirección ‘Received’\n" #: transact.c:335 #, c-format msgid "found Received address `%s'\n" msgstr "se encontró la dirección ‘Received’ ‘%s’\n" #: transact.c:534 msgid "message delimiter found while scanning headers\n" msgstr "delimitador de mensajes encontrado durante barrido de encabezados\n" #: transact.c:555 msgid "incorrect header line found while scanning headers\n" msgstr "encabezado incorrecto encontrado durante la revisión de encabezados\n" #: transact.c:557 #, c-format msgid "line: %s" msgstr "línea: %s" #: transact.c:1103 #, c-format msgid "no local matches, forwarding to %s\n" msgstr "no hay coincidencias locales, reenviado a %s\n" #: transact.c:1118 msgid "forwarding and deletion suppressed due to DNS errors\n" msgstr "reenvío y borrado suprimido debido a errores de DNS\n" #: transact.c:1224 msgid "writing RFC822 msgblk.headers\n" msgstr "escribiendo encabezados RFC822\n" #: transact.c:1242 msgid "no recipient addresses matched declared local names" msgstr "" "ninguna dirección de destino coincidió con los nombres locales declarados" #: transact.c:1249 #, c-format msgid "recipient address %s didn't match any local name" msgstr "la dirección de destino %s no coincide con algún nombre local" #: transact.c:1258 msgid "message has embedded NULs" msgstr "el mensaje contiene NULs" #: transact.c:1266 msgid "SMTP listener rejected local recipient addresses: " msgstr "El servidor SMTP rechazó las direcciones locales de destino: " #: transact.c:1394 msgid "writing message text\n" msgstr "escribiendo texto del mensaje\n" #: uid.c:248 #, c-format msgid "Old UID list from %s:" msgstr "Lista de UID viejas de %s:" #: uid.c:253 uid.c:264 uid.c:520 uid.c:570 msgid " " msgstr " " #: uid.c:260 msgid "Scratch list of UIDs:" msgstr "Lista borrador de UIDs:" #: uid.c:514 uid.c:566 #, c-format msgid "Merged UID list from %s:" msgstr "Se combinó la lista de UID de %s:" #: uid.c:516 #, c-format msgid "New UID list from %s:" msgstr "Lista de UID nuevas de %s:" #: uid.c:545 msgid "swapping UID lists\n" msgstr "se intercambian listas de UID\n" #: uid.c:553 msgid "not swapping UID lists, no UIDs seen this query\n" msgstr "" "no se intercambian las listas de UID, no se encontraron UIDs en esta " "consulta\n" #: uid.c:578 msgid "discarding new UID list\n" msgstr "descartando la nueva lista de UID\n" #: uid.c:613 msgid "Deleting fetchids file.\n" msgstr "Borrando el archivo fetchids.\n" #: uid.c:615 #, c-format msgid "Error deleting %s: %s\n" msgstr "Error borrando %s: %s\n" #: uid.c:621 msgid "Writing fetchids file.\n" msgstr "Escribiendo el archivo fetchids.\n" #: uid.c:640 #, c-format msgid "Error writing to fetchids file %s, old file left in place.\n" msgstr "" "Error escribiendo al archivo fetchids %s. Se dejó el archivo original " "intacto.\n" #: uid.c:644 #, c-format msgid "Cannot rename fetchids file %s to %s: %s\n" msgstr "No se puede renombrar el archivo fetchids %s a %s: %s\n" #: uid.c:648 #, c-format msgid "Cannot open fetchids file %s for writing: %s\n" msgstr "No se puede abrir el archivo fetchids %s para escritura: %s\n" #: xmalloc.c:33 msgid "malloc failed\n" msgstr "malloc falló\n" #: xmalloc.c:47 msgid "realloc failed\n" msgstr "realloc falló\n" #~ msgid "Option --remote is not supported with ETRN\n" #~ msgstr "La opción --remote no es soportada con ETRN\n" #~ msgid "Option --remote is not supported with ODMR\n" #~ msgstr "La opción --remote no es soportada con ODMR\n" #~ msgid "Received" #~ msgstr "Recibido" #~ msgid "Cannot support ETRN without gethostbyname(2).\n" #~ msgstr "No se puede soportar ETRN sin gethostbyname(2).\n" #~ msgid "Cannot support ODMR without gethostbyname(2).\n" #~ msgstr "No se puede soportar ODMR sin gethostbyname(2).\n" #~ msgid "internal inconsistency\n" #~ msgstr "inconsistencia interna\n" #~ msgid "name is valid but has no IP address." #~ msgstr "el nombre es válido pero no tiene dirección IP." #~ msgid "unrecoverable name server error." #~ msgstr "error irrecuperable en el servidor de nombres." #~ msgid "temporary name server error." #~ msgstr "error temporario en el servidor de nombres." #~ msgid "unknown DNS error %d." #~ msgstr "error desconocido en el DNS %d." #~ msgid "fetchmail: illegal address length received for host %s\n" #~ msgstr "fetchmail: largo de dirección ilegal recibido de la máquina %s\n" #~ msgid " (using port %d)" #~ msgstr " (usando puerto %d)" #~ msgid " (using network security options %s)" #~ msgstr " (usando opciones de seguridad de red %s)" #~ msgid "alloca failed" #~ msgstr "alloca falló" #~ msgid "warning: found \"%s\" before any host names" #~ msgstr "cuidado: “%s” encontrado antes que cualquier nombre de máquina" #~ msgid "fetchmail: network security support is disabled\n" #~ msgstr "fetchmail: el soporte de seguridad de red está desactivado\n" #~ msgid " -T, --netsec set IP security request\n" #~ msgstr " -T, --netsec configurar el pedido de seguridad IP\n" #~ msgid "invalid security request" #~ msgstr "requerimiento de seguridad inválido" #~ msgid "network-security support disabled" #~ msgstr "soporte de seguridad de red desactivado"