From 976358e2343566207fed2101ce62ff6fbad7f830 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Mon, 25 Nov 2013 19:17:09 -0800 Subject: [PATCH] Input: add a new driver for GPIO beeper This patch adds a new driver for the beeper controlled via GPIO pin. The driver does not depend on the architecture and is positioned as a replacement for the specific drivers that are used for this function. Signed-off-by: Alexander Shiyan Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/gpio-beeper.txt | 13 ++ drivers/input/misc/Kconfig | 9 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/gpio-beeper.c | 127 ++++++++++++++++++ 4 files changed, 150 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/gpio-beeper.txt create mode 100644 drivers/input/misc/gpio-beeper.c diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt new file mode 100644 index 00000000000..a5086e37fce --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-beeper.txt @@ -0,0 +1,13 @@ +* GPIO beeper device tree bindings + +Register a beeper connected to GPIO pin. + +Required properties: +- compatible: Should be "gpio-beeper". +- gpios: From common gpio binding; gpio connection to beeper enable pin. + +Example: + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 5f4967d01bc..4ffc3973251 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -222,6 +222,15 @@ config INPUT_GP2A To compile this driver as a module, choose M here: the module will be called gp2ap002a00f. +config INPUT_GPIO_BEEPER + tristate "Generic GPIO Beeper support" + depends on OF_GPIO + help + Say Y here if you have a beeper connected to a GPIO pin. + + To compile this driver as a module, choose M here: the + module will be called gpio-beeper. + config INPUT_GPIO_TILT_POLLED tristate "Polled GPIO tilt switch" depends on GPIOLIB diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 0ebfb6dbf0f..cda71fc52fb 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o +obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c new file mode 100644 index 00000000000..b757435e2b3 --- /dev/null +++ b/drivers/input/misc/gpio-beeper.c @@ -0,0 +1,127 @@ +/* + * Generic GPIO beeper driver + * + * Copyright (C) 2013 Alexander Shiyan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include + +#define BEEPER_MODNAME "gpio-beeper" + +struct gpio_beeper { + struct work_struct work; + int gpio; + bool active_low; + bool beeping; +}; + +static void gpio_beeper_toggle(struct gpio_beeper *beep, bool on) +{ + gpio_set_value_cansleep(beep->gpio, on ^ beep->active_low); +} + +static void gpio_beeper_work(struct work_struct *work) +{ + struct gpio_beeper *beep = container_of(work, struct gpio_beeper, work); + + gpio_beeper_toggle(beep, beep->beeping); +} + +static int gpio_beeper_event(struct input_dev *dev, unsigned int type, + unsigned int code, int value) +{ + struct gpio_beeper *beep = input_get_drvdata(dev); + + if (type != EV_SND || code != SND_BELL) + return -ENOTSUPP; + + if (value < 0) + return -EINVAL; + + beep->beeping = value; + /* Schedule work to actually turn the beeper on or off */ + schedule_work(&beep->work); + + return 0; +} + +static void gpio_beeper_close(struct input_dev *input) +{ + struct gpio_beeper *beep = input_get_drvdata(input); + + cancel_work_sync(&beep->work); + gpio_beeper_toggle(beep, false); +} + +static int gpio_beeper_probe(struct platform_device *pdev) +{ + struct gpio_beeper *beep; + enum of_gpio_flags flags; + struct input_dev *input; + unsigned long gflags; + int err; + + beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL); + if (!beep) + return -ENOMEM; + + beep->gpio = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); + if (!gpio_is_valid(beep->gpio)) + return beep->gpio; + + input = devm_input_allocate_device(&pdev->dev); + if (!input) + return -ENOMEM; + + INIT_WORK(&beep->work, gpio_beeper_work); + + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + input->close = gpio_beeper_close; + input->event = gpio_beeper_event; + + input_set_capability(input, EV_SND, SND_BELL); + + beep->active_low = flags & OF_GPIO_ACTIVE_LOW; + gflags = beep->active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + + err = devm_gpio_request_one(&pdev->dev, beep->gpio, gflags, pdev->name); + if (err) + return err; + + input_set_drvdata(input, beep); + + return input_register_device(input); +} + +static struct of_device_id gpio_beeper_of_match[] = { + { .compatible = BEEPER_MODNAME, }, + { } +}; +MODULE_DEVICE_TABLE(of, gpio_beeper_of_match); + +static struct platform_driver gpio_beeper_platform_driver = { + .driver = { + .name = BEEPER_MODNAME, + .owner = THIS_MODULE, + .of_match_table = gpio_beeper_of_match, + }, + .probe = gpio_beeper_probe, +}; +module_platform_driver(gpio_beeper_platform_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shiyan "); +MODULE_DESCRIPTION("Generic GPIO beeper driver"); -- 2.43.2