staging:iio:ad7280a: Mark transfer buffer as __be32
Fixes the following warnings from sparse:
drivers/staging/iio/adc/ad7280a.c:194:35: warning: incorrect type in initializer (different base types)
drivers/staging/iio/adc/ad7280a.c:194:35: expected unsigned int [unsigned] tx_buf
drivers/staging/iio/adc/ad7280a.c:194:35: got restricted __be32 [usertype] <noident>
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:207:16: warning: cast to restricted __be32
drivers/staging/iio/adc/ad7280a.c:219:13: warning: incorrect type in assignment (different base types)
drivers/staging/iio/adc/ad7280a.c:219:13: expected unsigned int [unsigned] [assigned] reg
drivers/staging/iio/adc/ad7280a.c:219:13: got restricted __be32 [usertype] <noident>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following warnings from sparse:
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
drivers/iio/light/vcnl4000.c:88:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following warnings from sparse:
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fixes the following warnings from sparse:
drivers/iio/dac/ad5504.c:71:19: warning: incorrect type in initializer (different base types)
drivers/iio/dac/ad5504.c:71:19: expected unsigned short [unsigned] [usertype] tmp
drivers/iio/dac/ad5504.c:71:19: got restricted __be16 [usertype] <noident>
drivers/iio/dac/ad5504.c:80:19: warning: incorrect type in initializer (different base types)
drivers/iio/dac/ad5504.c:80:19: expected unsigned short [unsigned] [usertype] tmp
drivers/iio/dac/ad5504.c:80:19: got restricted __be16 [usertype] <noident>
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
drivers/iio/dac/ad5504.c:93:16: warning: cast to restricted __be16
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Martyn Welch [Fri, 8 Nov 2013 11:58:35 +0000 (11:58 +0000)]
VME: Rename vme_slot_get to avoid confusion with reference counting
Traditionally the "get" functions increment the reference count of the
object that is returned, which does not happen with vme_slot_get. The
function vme_slot_get returns the physical VME slot associated with a
particular struct vme_dev. Rename vme_slot_num to avoid any confusion.
Martyn Welch [Fri, 8 Nov 2013 11:58:34 +0000 (11:58 +0000)]
VME: Provide access to VME bus enumeration and fix vme_user match function
The match function for vme_user is completely wrong. It will blindly bind
against the first VME slot on each bus (at this point that would be just the
first bus as the driver can only handle one bus).
The original intention (before some major subsystem changes) was that the
driver bind against the slot to which the bridge was attached in the VME
system and to the bus(es) provided via the "bus" module parameter.
To do this cleanly (i.e. without poking arround in the subsystems internal
stuctures) a functionality has been added to provide access to the bus
enumeration.
staging: comedi: dt282x: tidy up the irq support in dt282x_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Also, only call dt282x_grab_dma() if we have an irq since interrupt support
is needed to support dma.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt2814: tidy up the irq support in dt2814_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt2811: remove disabled dt2811_adtrig() function
This function is not used by the driver. It's also suffering from bitrot
since COMEDI_MDEMAND and COMEDI_MCONTS are not defined anywhere. Just
remove the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dmm32at: tidy up the irq support in dmm32at_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.
Remove the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16m1: tidy up the irq support in das16m1_attach()
An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if an invalid irq is
selected by the user, or the request_irq() fails, the attach does not
fail.
Remove all the printk noise about the irq.
Only hookup the async command support if the request_irq() was successful.
Tidy up das16m1_irq_bits() a bit. This helper returns the value that needs
to be written to the DAS16M1_INTR_CONTROL register to setup the irq routing.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Gang [Wed, 27 Nov 2013 03:40:58 +0000 (11:40 +0800)]
drivers: staging: ft1000: ft1000-usb: ft1000_debug.c: check return value of get_user() in ft1000_ioctl()
get_user() may fail and cause 'msgsz' uninitialized, so need give a
check. The related warning (with allmodconfig under hexagon):
CC [M] drivers/staging/ft1000/ft1000-usb/ft1000_debug.o
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c: In function 'ft1000_ioctl':
include/uapi/linux/swab.h:53:9: warning: 'msgsz' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c:533:17: note: 'msgsz' was declared here
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rest of the code seem to imply that rmf_dumper may indeed be
NULL. Change the code so that dumping is not even considered if
rmf_dumper callback is not set.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bus_info field of struct ethtool_drvinfo is an array thus it always
evaluates to true in a boolean context. Therefore operation
depending on it being false will never be executed.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Warren [Wed, 27 Nov 2013 01:58:01 +0000 (18:58 -0700)]
staging: dwc2: set up all module params
The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.
The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:05 +0000 (22:42 +0800)]
staging/lustre/llite: fix used uninitialized warning
Got below warning when building with sparc:
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_write':
drivers/staging/lustre/lustre/llite/file.c:1247:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/lustre/lustre/llite/file.c: In function 'll_file_aio_read':
drivers/staging/lustre/lustre/llite/file.c:1188:9: warning: 'count' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:42:04 +0000 (22:42 +0800)]
staging/lustre: fix defined not used warning
register_sysctl_table/unregister_sysctl_table are defined
regardless of CONFIG_SYSCTL true or false. so we don't need
to surround them with #ifdef CONFIG_SYSCTL. Besides, current
code got build warnings when CONFIG_SYSCTL is not set:
drivers/staging/lustre/lustre/libcfs/linux/linux-proc.c:368:20: warning:
‘lnet_table’ defined but not used [-Wunused-variable]
Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Tao [Tue, 3 Dec 2013 14:41:58 +0000 (22:41 +0800)]
staging/lustre/obdclass: fix false used uninitialized warning
Got below warning when building lustre with 4.7.3.
drivers/staging/lustre/lustre/obdclass/llog_test.c: In function ‘
llog_test_init’:
drivers/staging/lustre/lustre/obdclass/llog_test.c:1058:28: warning: ‘
lvars.module_vars’ is used uninitialized in this function
[-Wuninitialized]
Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Eremin [Tue, 3 Dec 2013 13:58:51 +0000 (21:58 +0800)]
staging/lustre/pinger: remove never implemented suspend timeouts functionality
This is part of original Lustre tree commit. It removes never implemented
suspend timeouts functionality from pinger.c which was commented out
since 2007 and going to be replaced by adaptive timeouts. Also removed all
references to this functionality from ldlm_lockd.c, ldlm_request.c and
import.c which actually nevers executes or do nothing.
Lustre-change: http://review.whamcloud.com/6139
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3204 Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com> Signed-off-by: Ned Bass <bass6@llnl.gov> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements an extended attribute cache for
a Lustre client. It is organized as a write-through
cache: reads are performed from cache, updates are sent
synchronously to the MDS. An additional inode bit
MDS_INODELOCK_XATTR is added to protect the cache.
Lustre-change: http://review.whamcloud.com/5537
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2869 Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
[remove extra GPL notice in original patch as kernel already has one
and it causes checkpatch error. -- Peng Tao] Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Tue, 3 Dec 2013 13:58:48 +0000 (21:58 +0800)]
staging/lustre/hsm: Add hsm_release feature.
HSM Release is one of the key feature of HSM. To perform HSM
release, clients need to acquire the file lease exclusivelt and
flush dirty cache from clients. A special close REQ will be sent
to the MDT to release the lease and get rid of OST objects.
Lustre-change: http://review.whamcloud.com/7028
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1333 Signed-off-by: Aurelien Degremont <aurelien.degremont@cea.fr> Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Shehata [Tue, 3 Dec 2013 13:58:47 +0000 (21:58 +0800)]
staging/lustre/ptlrpc: Fix a crash when dereferencing NULL pointer
When a system runs out of memory and the function
ptlrpc_register_bulk() is called from ptl_send_rpc() the call to
LNetMEAttach() fails due to failure to allocate memory. This forces
the code into an error path, which most probably previously went
untested. The error path:
if (rc != 0) {
CERROR("%s: LNetMEAttach failed x"LPU64"/%d: rc = %dn",
desc->bd_export->exp_obd->obd_name, xid,
posted_md, rc);
break;
}
This print assumes that desc->bd_export is not NULL. However, it is.
In fact it is expected to be NULL. desc->bd_import is the correct
structure to access in this case.
John L. Hammond [Tue, 3 Dec 2013 13:58:45 +0000 (21:58 +0800)]
staging/lustre/llite: don't check for O_CREAT in it_create_mode
ll_lookup_it() checks for O_CREAT in struct lookup_intent's
it_create_mode member which is nonsensical, as it_create_mode is used
for file mode bits (S_IFREG, S_IRUSR, ...). Fix this by just checking
for IT_CREATE in it_op. This will not affect the behavior of either
function, since if O_CREATE (0100) is actually set in o_create_mode
then IT_CREATE must have been set in it_op. In ll_atomic_open() check
for O_CREAT in the open_flags parameter rather than testing mode.
Lustre-change: http://review.whamcloud.com/6786
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3517 Signed-off-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Reviewed-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fan Yong [Tue, 3 Dec 2013 13:58:43 +0000 (21:58 +0800)]
staging/lustre/scrub: OI scrub on OST
Main part of original patch in Lustre tree
(http://review.whamcloud.com/6669) changes server code and
is unneeded by client. The patch only picks up common
functions and data structures change.
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3335
Lustre-change: http://review.whamcloud.com/6669 Signed-off-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / ~andy / linux / log