On a related note, any use of mdelay() or large udelay() numbers should
be carefully reviewed, and replaced with msleep() or a different
implementation that does not rely on delaying the work.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The serio code can be a loadable module, which in turn means that nvec
also has to be a module, so mark it as "tristate" in Kconfig.
drivers/built-in.o: In function `nvec_mouse_remove':
drivers/staging/nvec/nvec_ps2.c:136: undefined reference to `serio_unregister_port'
drivers/built-in.o: In function `nvec_mouse_probe':
drivers/staging/nvec/nvec_ps2.c:126: undefined reference to `__serio_register_port'
drivers/built-in.o: In function `nvec_ps2_notifier':
drivers/staging/nvec/nvec_ps2.c:84: undefined reference to `serio_interrupt'
drivers/staging/nvec/nvec_ps2.c:91: undefined reference to `serio_interrupt'
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since this is only used as a performance optimization and only on ARM,
we can avoid the problem simply by not using that optimization when
building zsmalloc it is a loadable module.
flush_tlb_kernel_range is often an inline function, but out of the
architectures that use an extern function, only powerpc exports
it.
This driver was merged in 2.6.38 but never actually compiled because
it depends on the <mach/pcie.h> header that has not made it into the
kernel. Starting with Linux-3.10, this results in "allyesconfig"
build errors, since spear13xx can now be enabled with the default
"multiplatform" platform on ARM. Let's mark it as broken for now.
If it doesn't get fixed, we can drop it completely.
Tomas Winkler [Tue, 23 Apr 2013 04:38:12 +0000 (07:38 +0300)]
mei: reduce flow control only for completed messages
This fixes bug when only first chunk of a large message split
by hbuf_max_len is written to the hardware.
All the consequent chunks will not get a new credit.
PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
Note the error in pci_msix_table_size() -- we used PCI_MSI_FLAGS to
locate the PCI_MSIX_FLAGS word. No actual breakage because PCI_MSI_FLAGS
and PCI_MSIX_FLAGS happen to be the same.
This doesn't change any existing symbols, but it puts them in logical
order and uses explicit masks instead of shifts, like the rest of the
file.
It also adds new symbols for PCI_MSIX_TABLE_BIR,
PCI_MSIX_TABLE_OFFSET, PCI_MSIX_PBA_BIR, and PCI_MSIX_PBA_OFFSET to
replace the mis-named PCI_MSIX_FLAGS_BIRMASK (the BAR index fields
are part of the Table and PBA registers, not the flags register).
PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
The function pci_msi_check_device() is called while enabling MSI
or MSI-X interrupts to make sure the PCI device can support MSI
or MSI-X capability. This patch removes the check on MSI or MSI-X
capability in the function and lets the caller do the check.
PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
The patch caches the MSI and MSI-X capability offset in PCI device
(struct pci_dev) so that we needn't read it from the config space
upon enabling or disabling MSI or MSI-X interrupts.
[bhelgaas: moved pm_cap size change to separate patch] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Power Management Capability (PCI_CAP_ID_PM == 0x01) is defined by PCI
and must appear in the 256-byte PCI Configuration Space from 0-0xff. It
cannot be in the PCIe Extended Configuration space from 0x100-0xfff, so
we only need a u8 to hold its offset.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tomasz Figa [Tue, 16 Apr 2013 22:23:59 +0000 (00:23 +0200)]
pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter
Commit de88cbb7 moved definitions of chained_irq_enter and
chained_irq_exit to a generic header, which must be now included instead
of the legacy arch-specific one.
This patch fixes build error caused by including the legacy header
leading to undefined chained_irq_enter and chained_irq_exit symbols.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
s390/uapi: change struct statfs[64] member types to unsigned values
Kay Sievers reported that coreutils' stat tool has a problem with
s390's statfs[64] definition:
> The definition of struct statfs::f_type needs a fix. s390 is the only
> architecture in the kernel that uses an int and expects magic
> constants lager than INT_MAX to fit into.
>
> A fix is needed to make Fedora boot on s390, it currently fails to do
> so. Userspace does not want to add code to paper-over this issue.
where the format finally will be "%lx".
A similar problem can be found in the 'tail' tool.
s390 is the only architecture which has an int type f_type member in
struct statfs[64]. Other architectures have either unsigned ints or
long values, so that the problem doesn't occur there.
Therefore change the type of the f_type member to unsigned int, so
that we get zero extension instead of sign extension when assignment to
a long value happens.
This patch changes the s390 uapi struct stafs[64] definition in the kernel
to contain only unsigned values.
This was true for 32 bit builds anyway, since we use the generic uapi
header file in that case. So lets not include conditionally the generic
uapi header file but have the s390 implementation completely independent.
Also fix the types of struct compat_stafs to match reality and move the
definition of struct compat_statfs64 to asm/compat.h since it is not part
of the api.
Reported-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The f_spare field within struct compat_statfs is four bytes larger
than within the native 31 bit struct statfs.
compat_sys_statfs() clears the f_spare field in user space which
means that in compat mode four bytes that are behind the user space
supplied struct compat_statfs will be corrupted (zeroed).
According to Thomas Gleixner's Linux 2.6 history tree this bug is
present since v2.5.74 87880da124 "[PATCH] s390: 31 bit compat.".
So it get's fixed shortly before its 10th anniversary. Tough luck.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The gmap_map_segment function creates a special invalid segment table
entry with the address of the requested target location in the process
address space. The first access will create the connection between the
gmap segment table and the target page table of the main process.
If two threads do this concurrently both will walk the page tables and
allocate a gmap_rmap structure for the same segment table entry.
To avoid the race recheck the segment table entry after taking to page
table lock.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Implement gmap_translate() function which translates a guest absolute address
to a user space process address without establishing the guest page table
entries.
This is useful for kvm guest address translations where no memory access
is expected to happen soon (e.g. tprot exception handler).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Dan Carpenter [Sun, 21 Apr 2013 11:07:53 +0000 (14:07 +0300)]
staging/ozwpan: info leak in oz_cdev_ioctl()
If we're not maxed out then oz_get_pd_list() leaves part of the "list"
struct uninitialized. We should clear this so that no stack information
is leaked to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sun, 21 Apr 2013 11:08:31 +0000 (14:08 +0300)]
staging: dgrp: info leak in dgrp_dpa_ioctl()
If "nd->nd_vpd_len" is less than 512 then the last part of the
"vpd.vpd_data" has uninitialized stack information. We need to clear it
before copying the buffer to user space.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for
PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy
systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c
line 157 (phys_addr &= PAGE_MASK) bits 32-35 are cut off. Seems the
new PAGE_MASK is explicitly 32bit, or one could make it signed instead
of unsigned long.
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix offcore_rsp valid mask for SNB/IVB
perf: Treat attr.config as u64 in perf_swevent_init()
Guenter Roeck [Thu, 28 Mar 2013 04:23:10 +0000 (21:23 -0700)]
hwmon: (tmp401) Simplification and cleanup
Use two-dimensional array pointing to registers
Merge temperature and limit access functions into a single function
Return error codes from I2C reads
Use DIV_ROUND_CLOSEST for rounding operations and improve rounding
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
Merge branch 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kdump fixes from Peter Anvin:
"The kexec/kdump people have found several problems with the support
for loading over 4 GiB that was introduced in this merge cycle. This
is partly due to a number of design problems inherent in the way the
various pieces of kdump fit together (it is pretty horrifically manual
in many places.)
After a *lot* of iterations this is the patchset that was agreed upon,
but of course it is now very late in the cycle. However, because it
changes both the syntax and semantics of the crashkernel option, it
would be desirable to avoid a stable release with the broken
interfaces."
I'm not happy with the timing, since originally the plan was to release
the final 3.9 tomorrow. But apparently I'm doing an -rc8 instead...
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kexec: use Crash kernel for Crash kernel low
x86, kdump: Change crashkernel_high/low= to crashkernel=,high/low
x86, kdump: Retore crashkernel= to allocate under 896M
x86, kdump: Set crashkernel_low automatically
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"Three groups of fixes:
1. Make sure we don't execute the early microcode patching if family
< 6, since it would touch MSRs which don't exist on those
families, causing crashes.
2. The Xen partial emulation of HyperV can be dealt with more
gracefully than just disabling the driver.
3. More EFI variable space magic. In particular, variables hidden
from runtime code need to be taken into account too."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, microcode: Verify the family before dispatching microcode patching
x86, hyperv: Handle Xen emulation of Hyper-V more gracefully
x86,efi: Implement efi_no_storage_paranoia parameter
efi: Export efi_query_variable_store() for efivars.ko
x86/Kconfig: Make EFI select UCS2_STRING
efi: Distinguish between "remaining space" and actually used space
efi: Pass boot services variable info to runtime code
Move utf16 functions to kernel core and rename
x86,efi: Check max_size only if it is non-zero.
x86, efivars: firmware bug workarounds should be in platform code
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
"A set of fixes from various people - Will Deacon gets a prize for
removing code this time around. The biggest fix in this lot is
sorting out the ARM740T mess. The rest are relatively small fixes."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7699/1: sched_clock: Add more notrace to prevent recursion
ARM: 7698/1: perf: fix group validation when using enable_on_exec
ARM: 7697/1: hw_breakpoint: do not use __cpuinitdata for dbg_cpu_pm_nb
ARM: 7696/1: Fix kexec by setting outer_cache.inv_all for Feroceon
ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()
ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE
ARM: modules: don't export cpu_set_pte_ext when !MMU
ARM: mm: remove broken condition check for v4 flushing
ARM: mm: fix numerous hideous errors in proc-arm740.S
ARM: cache: remove ARMv3 support code
ARM: tlbflush: remove ARMv3 support
1) Fix race in sparc64 TLB shootdowns, we have to synchronize with the
sibling cpus completing if we are passing them a reference via
pointer to a data structure.
2) Fix cleaning of bitmaps in sparc32, from Akinobu Mita.
3) Fix various sparc header mistakes, some of which resulted in
userland build breakage. From Sam Ravnborg.
4) Kill ghost declarations and defines missed when several bits of code
got deleted recently.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix race in TLB batch processing.
sparc: use asm-generic version of types.h
bbc_i2c: fix section mismatch warning
sparc: use generic headers
sparc:cleanup unused code in smp_32.h
sparc/iommu: fix typo s/265KB/256KB/
sparc/srmmu: clear trailing edge of bitmap properly
sparc:remove unused declaration smp_boot_cpus()
1) ax88796 does 64-bit divides which causes link errors on ARM, fix
from Arnd Bergmann.
2) Once an improper offload setting is detected on an SKB we don't rate
limit the log message so we can very easily live lock. From Ben
Greear.
3) Openvswitch cannot report vport configuration changes reliably
because it didn't preallocate the netlink notification message
before changing state. From Jesse Gross.
4) The effective UID/GID SCM credentials fix, from Linus.
5) When a user explicitly asks for wireless authentication, cfg80211
isn't told about the AP detachment leaving inconsistent state. Fix
from Johannes Berg.
6) Fix self-MAC checks in batman-adv on multi-mesh nodes, from Antonio
Quartulli.
7) Revert build_skb() change sin IGB driver, can result in memory
corruption. From Alexander Duyck.
8) Fix setting VLANs on virtual functions in IXGBE, from Greg Rose.
9) Fix TSO races in qlcnic driver, from Sritej Velaga.
10) In bnx2x the kernel driver and UNDI firmware can try to program the
chip at the same time, resulting in corruption. Add proper
synchronization. From Dmitry Kravkov.
11) Fix corruption of status block in firmware ram in bxn2x, from Ariel
Elior.
12) Fix load balancing hash regression of bonding driver in forwarding
configurations, from Eric Dumazet.
13) Fix TS ECR regression in TCP by calling tcp_replace_ts_recent() in
all the right spots, from Eric Dumazet.
14) Fix several bonding bugs having to do with address manintainence,
including not removing address when configuration operations
encounter errors, missed locking on the address lists, missing
refcounting on VLAN objects, etc. All from Nikolay Aleksandrov.
15) Add workarounds for firmware bugs in LTE qmi_wwan devices, wherein
the devices fail to add a proper ethernet header while on LTE
networks but otherwise properly do so on 2G and 3G ones. From Bjørn
Mork.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
net: fix incorrect credentials passing
net: rate-limit warn-bad-offload splats.
net: ax88796: avoid 64 bit arithmetic
qlge: Update version to 1.00.00.32.
qlge: Fix ethtool autoneg advertising.
qlge: Fix receive path to drop error frames
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
net: qmi_wwan: fixup destination address (firmware bug workaround)
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround)
bonding: in bond_mc_swap() bond's mc addr list is walked without lock
bonding: disable netpoll on enslave failure
bonding: primary_slave & curr_active_slave are not cleaned on enslave failure
bonding: vlans don't get deleted on enslave failure
bonding: mc addresses don't get deleted on enslave failure
pkt_sched: fix error return code in fw_change_attrs()
irda: small read past the end of array in debug code
tcp: call tcp_replace_ts_recent() from tcp_ack()
netfilter: xt_rpfilter: skip locally generated broadcast/multicast, too
netfilter: ipset: bitmap:ip,mac: fix listing with timeout
bonding: fix l23 and l34 load balancing in forwarding path
...
Commit 257b5358b32f ("scm: Capture the full credentials of the scm
sender") changed the credentials passing code to pass in the effective
uid/gid instead of the real uid/gid.
Obviously this doesn't matter most of the time (since normally they are
the same), but it results in differences for suid binaries when the wrong
uid/gid ends up being used.
This just undoes that (presumably unintentional) part of the commit.
Reported-by: Andy Lutomirski <luto@amacapital.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: David S. Miller <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
H. Peter Anvin [Sat, 20 Apr 2013 00:09:03 +0000 (17:09 -0700)]
Merge remote-tracking branch 'efi/urgent' into x86/urgent
Matt Fleming (1):
x86, efivars: firmware bug workarounds should be in platform
code
Matthew Garrett (3):
Move utf16 functions to kernel core and rename
efi: Pass boot services variable info to runtime code
efi: Distinguish between "remaining space" and actually used
space
Richard Weinberger (2):
x86,efi: Check max_size only if it is non-zero.
x86,efi: Implement efi_no_storage_paranoia parameter
Sergey Vlasov (2):
x86/Kconfig: Make EFI select UCS2_STRING
efi: Export efi_query_variable_store() for efivars.ko
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
H. Peter Anvin [Fri, 19 Apr 2013 23:36:03 +0000 (16:36 -0700)]
x86, microcode: Verify the family before dispatching microcode patching
For each CPU vendor that implements CPU microcode patching, there will
be a minimum family for which this is implemented. Verify this
minimum level of support.
This can be done in the dispatch function or early in the application
functions. Doing the latter turned out to be somewhat awkward because
of the ineviable split between the BSP and the AP paths, and rather
than pushing deep into the application functions, do this in
the dispatch function.
Ben Greear [Fri, 19 Apr 2013 10:45:52 +0000 (10:45 +0000)]
net: rate-limit warn-bad-offload splats.
If one does do something unfortunate and allow a
bad offload bug into the kernel, this the
skb_warn_bad_offload can effectively live-lock the
system, filling the logs with the same error over
and over.
Add rate limitation to this so that box remains otherwise
functional in this case.
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When building ax88796 on an ARM platform with 64-bit resource_size_t,
we currently get
drivers/net/ethernet/8390/ax88796.c:875: undefined reference to `__aeabi_uldivmod'
because we do a division on the length of the MMIO resource.
Since we know that this resource is very short, using an
"unsigned long" instead of "resource_size_t" is entirely
sufficient, and avoids this link-time error.
Cc: Ben Dooks <ben-linux@fluff.org> Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
o Fix the driver to drop error frames in the receive path
o Update error counter which was not getting incremented
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Apr 2013 21:51:26 +0000 (17:51 -0400)]
Merge branch 'qmi_wwan'
Bjørn Mork says:
====================
This series adds workarounds for 3 different firmware bugs, each
preventing the affected devices from working at all. I therefore
humbly request that these fixes go to stable-3.8 (if still
maintained) and 3.9 (either via net if still possible, or via
stable if not).
All 3 workarounds are applied to all devices supported by the driver.
Adding quirks for specific devices was considered as an alternative,
but was rejected because we have too little information about the
exact distribution of the buggy firmwares. All we know is that the
same bug shows up in devices from at least 3 different, and presumably
independent, vendors.
The workarounds have instead been designed to automatically apply
when necessary, and to have as little impact as possible on unaffected
devices. The series has been tested on a number of devices both with
and without these bugs.
The series should apply cleanly to net/master, net-next/master and
stable/linux-3.8.y
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
We normally trust and use the CDC functional descriptors provided by a
number of devices. But some of these will erroneously list the address
reserved for the device end of the link. Attempting to use this on
both the device and host side will naturally not work.
Work around this bug by ignoring the functional descriptor and assign a
random address instead in this case.
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
The bogus address is always the same, and matches the address
suggested by many devices as a default address. It is likely a
hardcoded firmware default.
The circumstances where this bug has been observed indicates that
the trigger is related to timing or some other factor the host
cannot control. Repeating the exact same configuration sequence
that caused it to trigger once, will not necessarily cause it to
trigger the next time. Reproducing the bug is therefore difficult.
This opens up a possibility that the bug is more common than we can
confirm, because affected devices often will work properly again
after a reset. A procedure most users are likely to try out before
reporting a bug.
Unconditionally rewriting the destination address if the first digit
of the received packet is 0, is considered an acceptable compromise
since we already have to inspect this digit. The simplification will
cause unnecessary rewrites if the real address starts with 0, but this
is still better than adding additional tests for this particular case.
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
A number of LTE devices from different vendors all suffer from the
same firmware bug: Most of the packets received from the device while
it is attached to a LTE network will not have an ethernet header. The
devices work as expected when attached to 2G or 3G networks, sending
an ethernet header with all packets.
This driver is not aware of which network the modem attached to, and
even if it were there are still some packet types which are always
received with the header intact.
All devices supported by this driver have severely limited
networking capabilities:
- can only transmit IPv4, IPv6 and possibly ARP
- can only support a single host hardware address at any time
- will only do point-to-point communcation with the host
Because of this, we are able to reliably identify any bogus raw IP
packets by simply looking at the 4 IP version bits. All we need to
do is to avoid 4 or 6 in the first digit of the mac address. This
workaround ensures this, and fix up the received packets as necessary.
Given the distribution of the bug, it is believed that the source is
the chipset vendor. The devices which are verified to be affected are:
Huawei E392u-12 (Qualcomm MDM9200)
Pantech UML290 (Qualcomm MDM9600)
Novatel USB551L (Qualcomm MDM9600)
Novatel E362 (Qualcomm MDM9600)
It is believed that the bug depend on firmware revision, which means
that possibly all devices based on the above mentioned chipset may be
affected if we consider all available firmware revisions.
The information about affected devices and versions is likely
incomplete. As the additional overhead for packets not needing this
fixup is very small, it is considered acceptable to apply the
workaround to all devices handled by this driver.
Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Apr 2013 21:49:11 +0000 (17:49 -0400)]
Merge branch 'bonding'
Nikolay Aleksandrov says:
====================
This patch-set fixes mainly bugs on enslave failure and one occasion
of a needed locking. The patches are:
1. On enslave failure mc addresses are not flushed from the slave
2. On enslave failure vlans are not cleaned up from the slave
3. On enslave failure the bond's primary and curr_active_slave
are not cleaned up (which might result in use of freed memory)
4. On enslave failure netpoll is not disabled which might result in
a memory leak
5. In bond_mc_swap() the bond's mc addr list is walked without
netif_addr_lock, since it can be called without rtnl, add it
slave_disable_netpoll() is not called upon enslave failure which would
lead to a memory leak. Call slave_disable_netpoll() after err_detach as
that's the first error path after enabling netpoll on that slave.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: primary_slave & curr_active_slave are not cleaned on enslave failure
On enslave failure primary_slave can point to new_slave which is to be
freed, and the same applies to curr_active_slave. So check if this is
the case and clean up properly after err_detach because that's the first
error code path after they're set.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: vlans don't get deleted on enslave failure
The main problem is with vid refcount which only gets bumped up.
Delete the vlans after err_detach as that's the first error path
after the vlans are added.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: mc addresses don't get deleted on enslave failure
Add bond_mc_list_flush() after err_detach as that's the first error path
after the addresses are added. The main issue is the mc addresses' refcount
which only gets bumped up.
v2: update log message and don't move code unnecessarily
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pkt_sched: fix error return code in fw_change_attrs()
Fix to return -EINVAL when tb[TCA_FW_MASK] is set and head->mask != 0xFFFFFFFF
instead of 0 (ifdef CONFIG_NET_CLS_IND and tb[TCA_FW_INDEV]), as done elsewhere
in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 16 Apr 2013 21:10:38 +0000 (21:10 +0000)]
irda: small read past the end of array in debug code
The "reason" can come from skb->data[] and it hasn't been capped so it
can be from 0-255 instead of just 0-6. For example in irlmp_state_dtr()
the code does:
Also LMREASON has a couple other values which don't have entries in the
irlmp_reasons[] array. And 0xff is a valid reason as well which means
"unknown".
So far as I can see we don't actually care about "reason" except for in
the debug code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Apr 2013 21:26:26 +0000 (17:26 -0400)]
sparc64: Fix race in TLB batch processing.
As reported by Dave Kleikamp, when we emit cross calls to do batched
TLB flush processing we have a race because we do not synchronize on
the sibling cpus completing the cross call.
So meanwhile the TLB batch can be reset (tb->tlb_nr set to zero, etc.)
and either flushes are missed or flushes will flush the wrong
addresses.
Fix this by using generic infrastructure to synchonize on the
completion of the cross call.
This first required getting the flush_tlb_pending() call out from
switch_to() which operates with locks held and interrupts disabled.
The problem is that smp_call_function_many() cannot be invoked with
IRQs disabled and this is explicitly checked for with WARN_ON_ONCE().
We get the batch processing outside of locked IRQ disabled sections by
using some ideas from the powerpc port. Namely, we only batch inside
of arch_{enter,leave}_lazy_mmu_mode() calls. If we're not in such a
region, we flush TLBs synchronously.
1) Get rid of xcall_flush_tlb_pending and per-cpu type
implementations.
a) Add 'active' member to struct tlb_batch
b) Define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
c) Set 'active' in arch_enter_lazy_mmu_mode()
d) Run batch and clear 'active' in arch_leave_lazy_mmu_mode()
e) Check 'active' in tlb_batch_add_one() and do a synchronous
flush if it's clear.
4) Add infrastructure for synchronous TLB page flushes.
a) Implement __flush_tlb_page and per-cpu variants, patch
as needed.
b) Likewise for xcall_flush_tlb_page.
c) Implement smp_flush_tlb_page() to invoke the cross-call.
d) Wire up global_flush_tlb_page() to the right routine based
upon CONFIG_SMP
5) It turns out that singleton batches are very common, 2 out of every
3 batch flushes have only a single entry in them.
The batch flush waiting is very expensive, both because of the poll
on sibling cpu completeion, as well as because passing the tlb batch
pointer to the sibling cpus invokes a shared memory dereference.
Therefore, in flush_tlb_pending(), if there is only one entry in
the batch perform a completely asynchronous global_flush_tlb_page()
instead.
Reported-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Stephen Boyd [Thu, 18 Apr 2013 16:33:40 +0000 (17:33 +0100)]
ARM: 7699/1: sched_clock: Add more notrace to prevent recursion
cyc_to_sched_clock() is called by sched_clock() and cyc_to_ns()
is called by cyc_to_sched_clock(). I suspect that some compilers
inline both of these functions into sched_clock() and so we've
been getting away without having a notrace marking. It seems that
my compiler isn't inlining cyc_to_sched_clock() though, so I'm
hitting a recursion bug when I enable the function graph tracer,
causing my system to crash. Marking these functions notrace fixes
it. Technically cyc_to_ns() doesn't need the notrace because it's
already marked inline, but let's just add it so that if we ever
remove inline from that function it doesn't blow up.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tomas Winkler [Fri, 19 Apr 2013 19:01:34 +0000 (22:01 +0300)]
mei: revamp mei_irq_read_client_message function
1. Rename the function and change parameters order,
so that first parameter is mei_device
2. Simplify the function code flow
3. Rename helper functions to more self descriptive names
4. Use helpers common functions where possible
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Only one remaining fix for arm-soc platforms at this time, a small
bugfix for cpu hotplug on highbank platforms that has become much
easier to hit as of late.
Details in the patch description, but it's small and well-contained
and definitely impacts users of the platform, so 3.9 seems
appropriate."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: highbank: fix cache flush ordering for cpu hotplug
David S. Miller [Fri, 19 Apr 2013 18:23:55 +0000 (14:23 -0400)]
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:
====================
A few stragglers hoping for 3.9, somewhat delayed due to my travels...
On the mac80211 bits, Johannes says:
"Sadly, I have another pull request -- the idle handling fix broke LED
handling in some cases."
and:
"Yet one more!
This fixes a fairly important/annoying bug -- when roaming between
multiple APs of the same network, the system could get stuck thinking it
was connected to the old one while it really wasn't."
On top of that...
Arend sends a brcmfmac patch that removes advertising a feature that
isn't actually fully supported, and a brcmsmac patch that rearranges
code to request firmware at IFF_UP to play more nicely with being
built into the kernel.
Felix gives us a minor ath9k_htc fix to support the newly released
open source firmware, and an ath9k_hw initvals fix to improve device
stability.
Rafał Miłecki provides a fix for an ssb regression that caused a
serious performance problem with b43.
Zefir Kurtisi offers an ath9k fix to change some kmalloc flags to
allow the DFS detector to be called in softirq context.
Please let me know if there are problems. If these don't make 3.9,
I'll just pull them into wireless-next -- just let me know if you
want to do it that way!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 19 Apr 2013 07:19:48 +0000 (07:19 +0000)]
tcp: call tcp_replace_ts_recent() from tcp_ack()
commit bd090dfc634d (tcp: tcp_replace_ts_recent() should not be called
from tcp_validate_incoming()) introduced a TS ecr bug in slow path
processing.
1 A > B P. 1:10001(10000) ack 1 <nop,nop,TS val 1001 ecr 200>
2 B < A . 1:1(0) ack 1 win 257 <sack 9001:10001,TS val 300 ecr 1001>
3 A > B . 1:1001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200>
4 A > B . 1001:2001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200>
(ecr 200 should be ecr 300 in packets 3 & 4)
Problem is tcp_ack() can trigger send of new packets (retransmits),
reflecting the prior TSval, instead of the TSval contained in the
currently processed incoming packet.
Fix this by calling tcp_replace_ts_recent() from tcp_ack() after the
checks, but before the actions.
Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
staging: comedi: drivers: free_irq() in comedi_legacy_detach()
All the legacy comedi drivers now call comedi_legacy_detach()
either directly or as part of their (*detach). Move the free_irq()
into comedi_legacy_detach() so that the drivers don't have to
deal with it.
For drivers that then only call comedi_legacy_detach() in their
private (*detach), remove the private function and use the helper
directly for the (*detach).
The amplc_pc236 and ni_labpc drivers are hybrid legacy/PCI drivers.
In the detach of a PCI board free_irq() still needs to be handled
by the driver.
The pcl724 and pcl726 drivers currently have the free_irq() #ifdef'ed
out. The comedi_legacy_detach() function sanity checks that the irq
has been requested before freeing it so they are safe to convert.
For aesthetic reasons, move the #ifdef unused chunk in the pcl816
driver up to the previous #ifdef unused block.
The pcmio and pcmuio drivers request multiple irqs and handle the
freeing of them. Remove the 'dev->irq = irq[0]' in those drivers
so that comedi_legacy_detach() does not attempt to free the irq.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_dio200: use comedi_legacy_detach()
The I/O region used by this driver is always requested using
comedi_request_region(). The devpriv->io union is only used by
the common code shared by the legacy and PCI drivers.
Use the new comedi_legacy_detach() helper in the (*detach) to
release the I/O region requested by this driver. That function
will handle the proper sanity checking before releasing the
resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: drivers: use comedi_legacy_detach() in simple drivers
Use the new comedi_legacy_detach() helper in the (*detach) to release
the I/O region requested by these drivers.
Since the (*detach) for these drivers only releases the region, remove
the private (*detach) functions and use comedi_legacy_detach() directly
for the (*detach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: use comedi_legacy_detach()
Use the new comedi_legacy_detach() helper in the (*detach) to release
the first I/O region requested by this driver.
An additional I/O region is requested for some of the boards this driver
supports. The iobase for that region is stored in the private data so
that the (*detach) knows it needs to be released. Remove the extra
cleanup in the (*attach) that releases the first region.
For aesthetics, move the release of the additional region in the
(*detach) so it follows the (*attach) order.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16m1: use comedi_legacy_detach()
Use the new comedi_legacy_detach() helper in the (*detach) to release
the first I/O region requested by this driver.
An additional I/O region is requested by this driver for the 8255
device. Save the iobase for that region in the private data so that
the (*detach) knows it needs to be released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16: use comedi_legacy_detach()
Use the new comedi_legacy_detach() helper in the (*detach) to release
the first I/O region requested by this driver.
An additional I/O region is requested for some of the boards this driver
supports. Save the iobase for that region in the private data so that
the (*detach) knows it needs to be released.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: use comedi_legacy_detach()
This driver does not follow the standard (*attach) (*detach) flow of
the other drivers in comedi. Comedi drivers do not 'cleanup' any of
the allocations made during the (*attach) if failures are encountered.
If the (*attach) fails, the comedi core will call the (*detach) to
handle any clenaup.
In this driver, the function free_resources() handles all the cleanup.
Remove the calls to this function during the (*attach). Since the
(*detach) is then the only caller, remove the function and just put
all the cleanup in the (*detach) function.
Use the new comedi_legacy_detach() helper in the (*detach) to release
the I/O region.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is intended to be used by the comedi legacy (ISA) drivers
either directly as the (*detach) function or as a helper in the drivers
private (*detach) function.
Modify the comedi_request_region() helper so that it stores the 'len' of
the region as well as the 'start' after the region has been successfuly
allocated by request_region() in __comedi_request_region(). This region
will then be automatically released detach of the driver by the
comedi_legacy_detach() helper.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Fri, 19 Apr 2013 11:35:45 +0000 (14:35 +0300)]
staging: rts5129: re-use kbasename()
The custom filename function mostly repeats the kernel's kbasename. This patch
simplifies it. The updated filename() will not check for the '\' in the
filenames. It seems redundant in Linux. The __FILE__ macro always defined if we
compile an existing file. Thus, NULL check is not needed there as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 19 Apr 2013 12:17:22 +0000 (14:17 +0200)]
staging: net: remove pc300 driver
To quote the TODO from staging/net/:
PC300:
The driver is very broken and cannot work with the current TTY
layer. It is inevitable to convert it to the new TTY API. If no
one steps in to adopt the driver, it will be removed in the 3.7
release.
Nothing has changed since more than _one_ year on this driver, thus
just remove it since we already moved past 3.7. If somebody steps
up and does a whole rework, he/she, of course, is free to resubmit
it. Since this is the only one in the net directory, we can remove
it as well.
projects / ~andy / linux / log