Thomas Gleixner [Wed, 20 Feb 2008 22:57:30 +0000 (23:57 +0100)]
x86: fix vsyscall wreckage
based on a report from Arne Georg Gleditsch about user-space apps
misbehaving after toggling /proc/sys/kernel/vsyscall64, a review
of the code revealed that the "NOP patching" done there is
fundamentally unsafe for a number of reasons:
1) the patching code runs without synchronizing other CPUs
2) it inserts NOPs even if there is no clock source which provides vread
3) when the clock source changes to one without vread we run in
exactly the same problem as in #2
4) if nobody toggles the proc entry from 1 to 0 and to 1 again, then
the syscall is not patched out
as a result it is possible to break user-space via this patching.
The only safe thing for now is to remove the patching.
This code was broken since v2.6.21.
Reported-by: Arne Georg Gleditsch <arne.gleditsch@dolphinics.no> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 21 Feb 2008 12:39:30 +0000 (13:39 +0100)]
x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZE
The KERNEL_TEXT_SIZE constant was mis-named, as we not only map the kernel
text but data, bss and init sections as well.
That name led me on the wrong path with the KERNEL_TEXT_SIZE regression,
because i knew how big of _text_ my images have and i knew about the 40 MB
"text" limit so i wrongly thought to be on the safe side of the 40 MB limit
with my 29 MB of text, while the total image size was slightly above 40 MB.
40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/
So it happily crashed right in head_64.S, which - as we all know - is
the most debuggable code in the whole architecture ;-)
So increase the limit to allow an up to 128MB kernel image to be mapped.
(should anyone be that crazy or lazy)
We have a full 4K of pagetable (level2_kernel_pgt) allocated for these
mappings already, so there's no RAM overhead and the limit was rather
pointless and arbitrary.
H. Peter Anvin [Wed, 13 Feb 2008 19:16:46 +0000 (11:16 -0800)]
x86: handle BIOSes which terminate e820 with CF=1 and no SMAP
The proper way to terminate the e820 chain is with %ebx == 0 on the
last legitimate memory block. However, several BIOSes don't do that
and instead return error (CF = 1) when trying to read off the end of
the list. For this error return, %eax doesn't necessarily return the
SMAP signature -- correctly so, since %ah should contain an error code
in this case.
To deal with some particularly broken BIOSes, we clear the entire e820
chain if the SMAP signature is missing in the middle, indicating a
plain insane e820 implementation. However, we need to make the test
for CF = 1 before the SMAP check.
This fixes at least one HP laptop (nc6400) for which none of the
memory-probing methods (e820, e801, 88) functioned fully according to
spec.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 14 Feb 2008 22:56:45 +0000 (14:56 -0800)]
x86: don't use P6_NOPs if compiling with CONFIG_X86_GENERIC
P6_NOPs are definitely not supported on some VIA CPUs, and possibly
(unverified) on AMD K7s. It is also the only thing that prevents a
686 kernel from running on Transmeta TM3x00/5x00 (Crusoe) series.
The performance benefit over generic NOPs is very small, so when
building for generic consumption, avoid using them.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 14 Feb 2008 22:51:00 +0000 (14:51 -0800)]
x86: do not promote TM3x00/TM5x00 to i686-class
We have been promoting Transmeta TM3x00/TM5x00 chips to i686-class
based on the notion that they contain all the user-space visible
features of an i686-class chip. However, this is not actually true:
they lack the EA-taking long NOPs (0F 1F /0). Since this is a
userspace-visible incompatibility, downgrade these CPUs to the
manufacturer-defined i586 level.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86/early_ioremap: don't assume we're using swapper_pg_dir
At the early stages of boot, before the kernel pagetable has been
fully initialized, a Xen kernel will still be running off the
Xen-provided pagetables rather than swapper_pg_dir[]. Therefore,
readback cr3 to determine the base of the pagetable rather than
assuming swapper_pg_dir[].
static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
{
- pgd_t *pgd = &swapper_pg_dir[pgd_index(addr)];
+ /* Don't assume we're using swapper_pg_dir at this point */
+ pgd_t *base = __va(read_cr3());
+ pgd_t *pgd = &base[pgd_index(addr)];
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
Trying to analyze the problem, it seems on the guest side of lguest,
%cr3 has a different value from &swapper_pg-dir (which
is AFAIK fine on a pravirt guest):
Putting some debugging messages in early_ioremap_pmd:
Harvey Harrison [Wed, 13 Feb 2008 21:14:35 +0000 (13:14 -0800)]
lguest: include function prototypes
Added a declaration to asm-x86/lguest.h and moved the extern arrays there
as well. As an alternative to including asm/lguest.h directly, an
include could be put in linux/lguest.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: "rusty@rustcorp.com.au" <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Chien Tung [Thu, 21 Feb 2008 13:51:17 +0000 (07:51 -0600)]
RDMA/nes: Resurrect error path dead code
Adrian Bunk pointed out that a Coverity scan found some apparently
dead code in nes_verbs.c that really shouldn't have been dead.
The function nes_create_cq() was missing the assignment
err = 1;
just prior to an iteration that conditionally set err = 0 if a PBL was
found for a given virtual CQ. I also noticed we should have been
returning -EFAULT on a couple related error paths.
Bryan Rosenburg [Wed, 20 Feb 2008 23:31:48 +0000 (17:31 -0600)]
RDMA/cxgb3: Fix shift calc in build_phys_page_list() for 1-entry page lists
A single entry (addr 0x10001000, size 0x2000) will get converted to
page address 0x10000000 with a page size of 0x4000. The code as it
stands doesn't address the single buffer case, but in fact it allows
the subsequent single-buffer special case to be eliminated entirely.
Because the mask now includes the (page adjusted) starting and ending
addresses, the general case works for the single buffer case as well.
Signed-off-by: Bryan Rosenburg <rosnbrg@us.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dale Farnsworth [Mon, 25 Feb 2008 22:03:02 +0000 (23:03 +0100)]
Subject: lockdep: include all lock classes in all_lock_classes
Add each lock class to the all_lock_classes list when it is
first registered.
Previously, lock classes were added to all_lock_classes when
the lock class was first used. Since one of the uses of the
list is to find unused locks, this didn't work well.
Peter Zijlstra [Mon, 25 Feb 2008 22:02:48 +0000 (23:02 +0100)]
lockdep: increase MAX_LOCK_DEPTH
Some code paths exceed the current max lock depth (XFS), so increase
this limit a bit. I looked at making this a dynamic allocated array,
but we should not advocate insane lock depths, so stay with this as
long as it works...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change getting task_struct by get_proc_task() at read or write time,
and returns -ESRCH if get_proc_task() returns NULL.
This is same behavior as other /proc files.
latencytop: fix kernel panic while reading latency proc file
Reading /proc/<pid>/latency or /proc/<pid>/task/<tid>/latency could cause
NULL pointer dereference.
In lstats_open(), get_proc_task() can return NULL, in which case the kernel
will oops at lstats_show_proc() because m->private is NULL.
When get_proc_task() returns NULL, the kernel should return -ENOENT.
This can be reproduced by the following script.
while :
do
date
bash -c 'ls > ls.$$' &
pid=$!
cat /proc/$pid/latency &
cat /proc/$pid/latency &
cat /proc/$pid/latency &
cat /proc/$pid/latency
done
Harvey Harrison [Fri, 15 Feb 2008 17:56:36 +0000 (09:56 -0800)]
sched: fix signedness warnings in sched.c
Unsigned long values are always assigned to switch_count,
make it unsigned long.
kernel/sched.c:3897:15: warning: incorrect type in assignment (different signedness)
kernel/sched.c:3897:15: expected long *switch_count
kernel/sched.c:3897:15: got unsigned long *<noident>
kernel/sched.c:3921:16: warning: incorrect type in assignment (different signedness)
kernel/sched.c:3921:16: expected long *switch_count
kernel/sched.c:3921:16: got unsigned long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 13 Feb 2008 13:02:36 +0000 (14:02 +0100)]
sched: make early bootup sched_clock() use safer
do not call sched_clock() too early. Not only might rq->idle
not be set up - but pure per-cpu data might not be accessible
either.
this solves an ia64 early bootup hang with CONFIG_PRINTK_TIME=y.
Tested-by: Tony Luck <tony.luck@gmail.com> Acked-by: Tony Luck <tony.luck@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sam Ravnborg [Mon, 25 Feb 2008 03:49:52 +0000 (19:49 -0800)]
[SPARC64]: Fix section mismatch from kernel_map_range
Fix following warnings:
WARNING: vmlinux.o(.text+0x4f980): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
WARNING: vmlinux.o(.text+0x4f9cc): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
alloc_bootmem() is only used during early init and for any subsequent
call to kernel_map_range() the program logic avoid the call.
So annotate kernel_map_range() with __ref to tell modpost to
ignore the reference to a __init function.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sam Ravnborg [Mon, 25 Feb 2008 03:47:51 +0000 (19:47 -0800)]
[SPARC64]: Fix section mismatchs from dr_cpu_data
Fix following warnings:
WARNING: vmlinux.o(.text+0x4b258): Section mismatch in reference from the function dr_cpu_data() to the function .devinit.text:mdesc_fill_in_cpu_data()
WARNING: vmlinux.o(.text+0x4b290): Section mismatch in reference from the function dr_cpu_data() to the function .cpuinit.text:cpu_up()
mdesc_fill_in_cpu_data() is only used during early init and for
cpu hotplug so the __cpuinit annotation is the correct choice.
We have the call chain:
dr_cpu_data() => dr_cpu_configure() => mdesc_fill_in_cpu_data()
dr_cpu_data() is used only during early init and for cpu
hotplug. So annotating them all __cpuinit solves the
section mismatch and should be correct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 25 Feb 2008 02:45:09 +0000 (18:45 -0800)]
[SPARC]: Fix build in arch/sparc/kernel/led.c
CC [M] arch/sparc/kernel/led.o
arch/sparc/kernel/led.c: In function 'led_blink':
arch/sparc/kernel/led.c:35: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:35: error: 'jiffies' undeclared (first use in
this function)
arch/sparc/kernel/led.c:35: error: (Each undeclared identifier is
reported only once
arch/sparc/kernel/led.c:35: error: for each function it appears in.)
arch/sparc/kernel/led.c:36: error: 'avenrun' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'FSHIFT' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'HZ' undeclared (first use in this
function)
arch/sparc/kernel/led.c:37: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:39: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:40: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:42: error: implicit declaration of function
'add_timer'
arch/sparc/kernel/led.c: In function 'led_write_proc':
arch/sparc/kernel/led.c:70: error: implicit declaration of function
'copy_from_user'
arch/sparc/kernel/led.c:84: error: implicit declaration of function
'del_timer_sync'
arch/sparc/kernel/led.c: In function 'led_init':
arch/sparc/kernel/led.c:109: error: implicit declaration of function
'init_timer'
arch/sparc/kernel/led.c:110: error: invalid use of undefined type
'struct timer_list'
make[1]: *** [arch/sparc/kernel/led.o] Error 1
Based upon original patch by Robert Reif.
Signed-off-by: David S. Miller <davem@davemloft.net>
Harvey Harrison [Mon, 25 Feb 2008 02:38:31 +0000 (18:38 -0800)]
tipc: fix integer as NULL pointer sparse warnings in tipc
net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer
net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer
net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer
net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Brownell [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=n
Don't require platform code to be #ifdeffed according to whether
I2C is enabled or not ... if it's not enabled, let GCC compile out
all I2C device declarations. (Issue noted on an NSLU2 build that
didn't configure I2C.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Christian Krafft [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pca-isa: Add access check to legacy ioports
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel
if there is no device at that port.
This patch adds a check_legacy_ioport call, so probe fails gracefully
and thus prevents the oops.
Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pxa: Misc fixes
While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.
[JD: Some more fixes.]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Eric Miao <ymiao3@marvell.com>
Jean Delvare [Sun, 24 Feb 2008 19:03:41 +0000 (20:03 +0100)]
ARM: OMAP: Release i2c_adapter after use (Siemens SX1)
Each call to i2c_get_adapter() must be followed by a call to
i2c_put_adapter() to release the grabbed reference. Otherwise the
reference count grows forever and the adapter can never be
unregistered.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Vladimir Ananiev <vovan888@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Sun, 24 Feb 2008 05:40:32 +0000 (21:40 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata-core: fix kernel-doc warning
sata_fsl: fix build with ATA_VERBOSE_DEBUG
[libata] ahci: AMD SB700/SB800 SATA support 64bit DMA
libata-pmp: clear hob for pmp register accesses
libata: automatically use DMADIR if drive/bridge requires it
power_state: get rid of write-only variable in SATA
pata_atiixp: Use 255 sector limit
Anton Vorontsov [Fri, 22 Feb 2008 16:54:25 +0000 (19:54 +0300)]
sata_fsl: fix build with ATA_VERBOSE_DEBUG
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG
is defined:
CC drivers/ata/sata_fsl.o
drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’:
drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’
drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’
drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’:
drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function)
drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once
drivers/ata/sata_fsl.c:459: error: for each function it appears in.)
drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’:
drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function)
make[2]: *** [drivers/ata/sata_fsl.o] Error 1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Shane Huang [Fri, 22 Feb 2008 13:00:31 +0000 (05:00 -0800)]
[libata] ahci: AMD SB700/SB800 SATA support 64bit DMA
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341579511a247f5993865aa68379e283c5c was added with
careless reference to SB600, which should be modified by this patch.
Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Thu, 21 Feb 2008 20:52:25 +0000 (15:52 -0500)]
libata-pmp: clear hob for pmp register accesses
>> Mark Lord wrote:
>>> Tejun, I've added PMP to sata_mv, and am now trying to get it
>>> to work with a Marvell PM attached.
>>>
>>> And the behaviour I see is very bizarre.
>>>
>>> After hard+soft resets, the PM signature is found,
>>> and libata interrogates the PM registers.
>>>
>>> It successfully reads register 0, and then register 1.
>>> But all subsequent registers read out (incorrectly) as zeros.
...
This behavior has been confirmed by Marvell with a SATA analyzer.
The Marvell port-multiplier apparently likes to see clean HOB
information when accessing PMP registers.
Since sata_mv uses PIO shadow register access, this doesn't happen
automatically, as it might in a more purely FIS-based driver (eg. ahci).
One way to fix this is to flag these commands with ATA_TFLAG_LBA48,
forcing libata to write out the HOB fields with known (zero) values.
Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Thu, 21 Feb 2008 04:25:50 +0000 (13:25 +0900)]
libata: automatically use DMADIR if drive/bridge requires it
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir.
That's nice, but most SATA devices which need it will tell us about it
in their IDENTIFY PACKET response, as bit-15 of word-62 of the
returned data (as per ATA7, ATA8 specifications).
So for those which specify it, we should automatically use the DMADIR bit.
Otherwise, disc writing will fail by default on many SATA-ATAPI drives.
This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it
if atapi_dmadir is set or identify data indicates DMADIR is necessary.
atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting
DMADIR.
Original patch is from Mark Lord.
Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jesse Brandeburg [Thu, 21 Feb 2008 23:11:02 +0000 (15:11 -0800)]
e1000e: fix flow control denial of service possibility
this patch avoids a denial of service from an evildoer sending a
continuous stream of flow control at our adapter that is plugged
into a non-flow control enabled switch.
Auke Kok [Thu, 21 Feb 2008 23:10:41 +0000 (15:10 -0800)]
ixgb: add RNBC counter - no buffer count - to ethtool stats
This counter is valuable to determine if the system is unable
to timely return buffers to the hardware and this counter starts
to increase well before the hardware starts to drop packets. If
users experience rx_no_buffer_count increasing, they should increase
the amount of descriptors. That will provide more buffers for the
hardware and will decrease the chance of hard drops.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Fix problems in LED management, so ethtool -p works correctly on Yukon-EC
and other chips. The driver was incorrectly setting the PHY LED overide bits.
Moral: read the spec sheet, not the vendor driver.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
[NETFILTER]: fix ebtable targets return
[IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly.
[NET]: Restore sanity wrt. print_mac().
[NEIGH]: Fix race between neighbor lookup and table's hash_rnd update.
[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK
tg3: ethtool phys_id default
[BNX2]: Update version to 1.7.4.
[BNX2]: Disable parallel detect on an HP blade.
[BNX2]: More 5706S link down workaround.
ssb: Fix support for PCI devices behind a SSB->PCI bridge
zd1211rw: fix sparse warnings
rtl818x: fix sparse warnings
ssb: Fix pcicore cardbus mode
ssb: Make the GPIO API reentrancy safe
ssb: Fix the GPIO API
ssb: Fix watchdog access for devices without a chipcommon
ssb: Fix serial console on new bcm47xx devices
ath5k: Fix build warnings on some 64-bit platforms.
WDEV, ath5k, don't return int from bool function
WDEV: ath5k, fix lock imbalance
...
Bill Hayes [Tue, 19 Feb 2008 18:24:41 +0000 (10:24 -0800)]
igb: Fix panic with NICs with 1000BASE-SX PHY
This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when
running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The
panic does not happen with the 1000BASE-T PHY, only with a SX connection.
Signed-off-by: Bill Hayes <bill.hayes@hp.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Becky Bruce [Mon, 18 Feb 2008 23:24:30 +0000 (17:24 -0600)]
gianfar: don't pass NULL dev ptr to DMA ops
Change all dma op invocations in gianfar.c to actually pass in the
device pointer. Currently, the value is ignored, but it will be
used going forward as we implement archdata for 32-bit powerpc.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Francois Romieu [Mon, 18 Feb 2008 20:20:32 +0000 (21:20 +0100)]
sis190: read the mac address from the eeprom first
Reading a serie of zero from the cmos sram area do not work
well with is_valid_ether_addr(). Let's read the mac address
from the eeprom first as it seems more reliable.
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Harvey Harrison [Mon, 18 Feb 2008 18:04:38 +0000 (10:04 -0800)]
tlan: add static to function definitions
The forward declarations were already marked static, make the definitions
be static as well. Fixes the sparse warnings as well.
drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static?
drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static?
drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static?
drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static?
drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static?
drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static?
drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static?
drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static?
drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static?
drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static?
drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static?
drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static?
drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static?
drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static?
drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static?
drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static?
drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static?
drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static?
drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static?
drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static?
drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static?
drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static?
drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static?
drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static?
drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static?
drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static?
drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static?
drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static?
drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static?
drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static?
drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static?
drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Init sequence needs to poll phy until phy reset is complete. This is the
same problem that I fixed in 2002 in tulip driver.
Thanks to manty@manty.net for testing this patch.
Thanks to Pozsar Balazs <pozsy@uhulinux.hu> for posting/testing
a similar patch before:
http://lkml.org/lkml/2006/8/21/45
Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Grant Grundler [Sun, 17 Feb 2008 18:53:49 +0000 (11:53 -0700)]
update TULIP MAINTAINERS
Kyle and I are co-maintaining tulip driver. Normally kyle will review
my patchs and submit them. I'll deal with bugzilla.kernel.org bugs and
try to resolve those bugs.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Andy Gospodarek [Fri, 15 Feb 2008 22:05:25 +0000 (14:05 -0800)]
igb: fix legacy mode irq issue
I booted an igb kernel with the option pci=nomsi and instantly noticed
that interrupts no longer worked on my igb device. I took a look at the
interrupt initialization and quickly discovered a comment stating:
"DO NOT USE EIAME or IAME in legacy mode"
It seemed a bit odd that bits to enable IAM were being set in legacy
interrupt mode, so I dropped out the following parts and interrupts
began working fine again.
[Updated code flow and a nitpick spelling error --Auke]
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Thomas Klein [Wed, 13 Feb 2008 15:18:33 +0000 (16:18 +0100)]
ehea: add kdump support
This patch adds kdump support to the ehea driver. As the firmware doesn't free
resource handles automatically, the driver has to run an as simple as possible
free resource function in case of a crash shutdown. The function iterates over
two arrays freeing all resource handles which are stored there. The arrays are
kept up-to-date during normal runtime. The crash handler fn is triggered by the
recently introduced PPC crash shutdown reg/unreg functions.
Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
CC [M] drivers/usb/host/u132-hcd.o
drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’:
drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’
drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function)
...
Joonwoo Park [Sun, 24 Feb 2008 04:22:27 +0000 (20:22 -0800)]
[NETFILTER]: fix ebtable targets return
The function ebt_do_table doesn't take NF_DROP as a verdict from the targets.
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 24 Feb 2008 04:19:20 +0000 (20:19 -0800)]
[IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly.
Use the added dev_alloc_name() call to create tunnel device name,
rather than iterate in a hand-made loop with an artificial limit.
Thanks Patrick for noticing this.
[ The way this works is, when the device is actually registered,
the generic code noticed the '%' in the name and invokes
dev_alloc_name() to fully resolve the name. -DaveM ]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 24 Feb 2008 03:57:02 +0000 (19:57 -0800)]
[NEIGH]: Fix race between neighbor lookup and table's hash_rnd update.
The neigh_hash_grow() may update the tbl->hash_rnd value, which
is used in all tbl->hash callbacks to calculate the hashval.
Two lookup routines may race with this, since they call the
->hash callback without the tbl->lock held. Since the hash_rnd
is changed with this lock write-locked moving the calls to ->hash
under this lock read-locked closes this gap.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Sun, 24 Feb 2008 03:54:36 +0000 (19:54 -0800)]
[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK
RTM_NEWLINK allows for already existing links to be modified. For this
purpose do_setlink() is called which expects address attributes with a
payload length of at least dev->addr_len. This patch adds the necessary
validation for the RTM_NEWLINK case.
The address length for links to be created is not checked for now as the
actual attribute length is used when copying the address to the netdevice
structure. It might make sense to report an error if less than addr_len
bytes are provided but enforcing this might break drivers trying to be
smart with not transmitting all zero addresses.
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
When asked to blink LEDs the tg3 driver behaves when using:
ethtool -p ethX
The default value for data is zero, and other drivers interpret this
as blink forever (or at least a really long time). The tg3 driver
interprets this as blink once. All drivers should have the same
behaviour.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 24 Feb 2008 03:48:57 +0000 (19:48 -0800)]
[BNX2]: Disable parallel detect on an HP blade.
Because of some board issues, we need to disable parallel detect on
an HP blade. Without this patch, the link state can become stuck
when it goes into parallel detect mode.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 24 Feb 2008 03:47:44 +0000 (19:47 -0800)]
[BNX2]: More 5706S link down workaround.
The previous patches to workaround the 5706S on an HP blade were not
sufficient. The link state still does not change properly in some
cases. This patch adds polling to make it completely reliable.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 24 Feb 2008 02:05:03 +0000 (18:05 -0800)]
Add memory barrier semantics to wake_up() & co
Oleg Nesterov and others have pointed out that on some architectures,
the traditional sequence of
set_current_state(TASK_INTERRUPTIBLE);
if (CONDITION)
return;
schedule();
is racy wrt another CPU doing
CONDITION = 1;
wake_up_process(p);
because while set_current_state() has a memory barrier separating
setting of the TASK_INTERRUPTIBLE state from reading of the CONDITION
variable, there is no such memory barrier on the wakeup side.
Now, wake_up_process() does actually take a spinlock before it reads and
sets the task state on the waking side, and on x86 (and many other
architectures) that spinlock is in fact equivalent to a memory barrier,
but that is not generally guaranteed. The write that sets CONDITION
could move into the critical region protected by the runqueue spinlock.
However, adding a smp_wmb() to before the spinlock should now order the
writing of CONDITION wrt the lock itself, which in turn is ordered wrt
the accesses within the spinlock (which includes the reading of the old
state).
This should thus close the race (which probably has never been seen in
practice, but since smp_wmb() is a no-op on x86, it's not like this will
make anything worse either on the most common architecture where the
spinlock already gave the required protection).
Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Acked-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sat, 23 Feb 2008 21:03:29 +0000 (00:03 +0300)]
documentation: atomic_add_unless() doesn't imply mb() on failure
(sorry for being offtpoic, but while experts are here...)
A "typical" implementation of atomic_add_unless() can return 0 immediately
after the first atomic_read() (before doing cmpxchg). In that case it doesn't
provide any barrier semantics. See include/asm-ia64/atomic.h as an example.
We should either change the implementation, or fix the docs.
Li Zefan [Sat, 23 Feb 2008 23:24:13 +0000 (15:24 -0800)]
memcgroup: remove a useless VM_BUG_ON()
Remove this VM_BUG_ON(), as Balbir stated:
We used to have a for loop with !list_empty() as a termination condition
and VM_BUG_ON(!pc) is a spill over. With the new loop, VM_BUG_ON(!pc) does
not make sense.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Balbir Singh <balbir@in.ibm.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / ~andy / linux / log