Kevin McKinney [Tue, 13 Nov 2012 03:20:30 +0000 (22:20 -0500)]
Staging: bcm: Add two products and remove an existing product.
This patch adds two new products and modifies
the device id table to include them. In addition,
product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is
removed because Beceem, ZTE, Sprint use this id
for block devices.
Reported-by: Muhammad Minhazul Haque <mdminhazulhaque@gmail.com> Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the interrupt service routine, check the device is asserting the
shared interrupt line and check that interrupts have been enabled.
When attaching the device, disable interrupts before setting up the
interrupt handler to avoid handling spurious interrupts before the
device is ready.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if ((this_board->pc_EepromChip == NULL)
|| (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {
to this:
if (!this_board->pc_EepromChip ||
!strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {
I just noticed that the strcmp test is wrong.
This fixes the test and adds a comment for it.
This error "broke" the addi-data drivers but they are broken anyway
since they don't follow the comedi core API.
The addi_apci_1032 driver has been converted to follow the comedi core
API. This error effects that driver since the iobase for it should be
found in PCI bar 1 not 2. This fixes that also.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_*: use auto_attach instead of attach_pci
Change the remaining addi-data drivers so they attach using the generic
'auto_attach' method instead the pci specific 'attach_pci' method. The
'attach_pci' is deprecated and is going to be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi-data: use auto_attach instead of attach_pci
Change the addi-data drivers that use the "common" code so they
attach using the generic 'auto_attach' method instead the pci
specific 'attach_pci' method. The 'attach_pci' is deprecated and
is going to be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1500: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].
Fix the function so it works like the comedi core expects.
The 'insn_read' and 'insn_Write' functions for the digital input subdevice
cannot be removed yet. This driver is again abusing the API and uses these
functions to initialize the board and start/stop "events" generated by the
board. These will be addressed later.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1516: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1516: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1564: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_2016: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_2032: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_2200: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_2200: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3120: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3120: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3200: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3200: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function uses the data[0] parameter to determine
if a single channel or all thei nput channels are being read. The status
is then being returned in data[0].
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3xxx: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3xxx: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function is returning the status in data[0]. It
is also unnecessarily testing the size of the return buffer.
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels. This allows removing the i_APCI3XXX_InsnReadDigitalInput()
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3501: fix digital output 'insn_bits' function
This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].
Currently this driver uses the 'insn_write' function to update either a
single output channel or all the channels and the 'insn_bits' function to
read the state of either a single channel or all the channels.
Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3501: fix digital input 'insn_bits' function
This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this driver uses the data[0] value passed to the function
to determine if a single input channel status is requested or the status of
all the input channels.
Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function is the digital output subdevice 'insn_config' operation.
It does not follow the comedi API and the digital output channels on
this board are not configurable. Just remove this broken function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuanhan Liu [Mon, 5 Nov 2012 05:19:40 +0000 (13:19 +0800)]
staging: comedi: jr3_pci: return 'result' from comedi_pci_enable instead of -EIO
Fix a smatch warning:
drivers/staging/comedi/drivers/jr3_pci.c:793 jr3_pci_auto_attach() info: why not propagate 'result' from comedi_pci_enable() instead of -5?
Merge tag 'iio-for-3.8d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO cleanups and fixes from Jonathan:
"4th set of IIO driver updates and new functionality for the 3.8 cycle.
2 drivers going through final cleanup and moving out of staging.
Addition to the core of support for multiple buffers from a single
datastream. This functionality is core in allowing multiple users
of interrupt driven data streams from the devices. First user
will shortly be an input bridge driver. This has been in review
/ revision for over a year resulting in a far cleaner result.
Much of the work had been in precursor patches. Here we just
add the buffer set tear up and down support + switch to multiple
buffer pushing in the drivers (a one line change in all users).
Thanks to those who have tested / reviewed this set."
Merge tag 'iio-for-3.8c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO patches from Jonathan:
"Third round of IIO subsystem updates for the 3.8 cycle.
Here we have a series of fixes to the adis16400 driver. These
were part of a previous pull request for the 3.7 cycle but
Greg suggested delaying them given their large and invasive
nature and the fact they aren't fixing regressions (as the
relevant code was never correct).
The support added for the adis16334 missed a number of small
differences between this and the parts supported. This series
deals with those and also cleans up some related code."
Pull networking fixes from David Miller:
"Bug fixes galore, mostly in drivers as is often the case:
1) USB gadget and cdc_eem drivers need adjustments to their frame size
lengths in order to handle VLANs correctly. From Ian Coolidge.
2) TIPC and several network drivers erroneously call tasklet_disable
before tasklet_kill, fix from Xiaotian Feng.
3) r8169 driver needs to apply the WOL suspend quirk to more chipsets,
fix from Cyril Brulebois.
4) Fix multicast filters on RTL_GIGA_MAC_VER_35 r8169 chips, from
Nathan Walp.
5) FDB netlink dumps should use RTM_NEWNEIGH as the message type, not
zero. From John Fastabend.
6) Fix smsc95xx tx checksum offload on big-endian, from Steve
Glendinning.
7) __inet_diag_dump() needs to repsect and report the error value
returned from inet_diag_lock_handler() rather than ignore it.
Otherwise if an inet diag handler is not available for a particular
protocol, we essentially report success instead of giving an error
indication. Fix from Cyrill Gorcunov.
8) When the QFQ packet scheduler sees TSO/GSO packets it does not
handle things properly, and in fact ends up corrupting it's
datastructures as well as mis-schedule packets. Fix from Paolo
Valente.
9) Fix oopser in skb_loop_sk(), from Eric Leblond.
10) CXGB4 passes partially uninitialized datastructures in to FW
commands, fix from Vipul Pandya.
11) When we send unsolicited ipv6 neighbour advertisements, we should
send them to the link-local allnodes multicast address, as per
RFC4861. Fix from Hannes Frederic Sowa.
12) There is some kind of bug in the usbnet's kevent deferral
mechanism, but more immediately when it triggers an uncontrolled
stream of kernel messages spam the log. Rate limit the error log
message triggered when this problem occurs, as sending thousands
of error messages into the kernel log doesn't help matters at all,
and in fact makes further diagnosis more difficult.
From Steve Glendinning.
13) Fix gianfar restore from hibernation, from Wang Dongsheng.
14) The netlink message attribute sizes are wrong in the ipv6 GRE
driver, it was using the size of ipv4 addresses instead of ipv6
ones :-) Fix from Nicolas Dichtel."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
gre6: fix rtnl dump messages
gianfar: ethernet vanishes after restoring from hibernation
usbnet: ratelimit kevent may have been dropped warnings
ipv6: send unsolicited neighbour advertisements to all-nodes
net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANs
usb: gadget: g_ether: fix frame size check for 802.1Q
cxgb4: Fix initialization of SGE_CONTROL register
isdn: Make CONFIG_ISDN depend on CONFIG_NETDEVICES
cxgb4: Initialize data structures before using.
af-packet: fix oops when socket is not present
pkt_sched: enable QFQ to support TSO/GSO
net: inet_diag -- Return error code if protocol handler is missed
net: bnx2x: Fix typo in bnx2x driver
smsc95xx: fix tx checksum offload for big endian
rtnetlink: Use nlmsg type RTM_NEWNEIGH from dflt fdb dump
ptp: update adjfreq callback description
r8169: allow multicast packets on sub-8168f chipset.
r8169: Fix WoL on RTL8168d/8111d.
drivers/net: use tasklet_kill in device remove/close process
tipc: do not use tasklet_disable before tasklet_kill
Pull sparc fixes from David Miller:
"Several build/bug fixes for sparc, including:
1) Configuring a mix of static vs. modular sparc64 crypto modules
didn't work, remove an ill-conceived attempt to only have to build
the device match table for these drivers once to fix the problem.
Reported by Meelis Roos.
2) Make the montgomery multiple/square and mpmul instructions actually
usable in 32-bit tasks. Essentially this involves providing 32-bit
userspace with a way to use a 64-bit stack when it needs to.
3) Our sparc64 atomic backoffs don't yield cpu strands properly on
Niagara chips. Use pause instruction when available to achieve
this, otherwise use a benign instruction we know blocks the strand
for some time.
4) Wire up kcmp
5) Fix the build of various drivers by removing the unnecessary
blocking of OF_GPIO when SPARC.
6) Fix unintended regression wherein of_address_to_resource stopped
being provided. Fix from Andreas Larsson.
7) Fix NULL dereference in leon_handle_ext_irq(), also from Andreas
Larsson."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix build with mix of modular vs. non-modular crypto drivers.
sparc: Support atomic64_dec_if_positive properly.
of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again
sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq
sparc: Add sparc support for platform_get_irq()
sparc: Allow OF_GPIO on sparc.
qlogicpti: Fix build warning.
sparc: Wire up sys_kcmp.
sparc64: Improvde documentation and readability of atomic backoff code.
sparc64: Use pause instruction when available.
sparc64: Fix cpu strand yielding.
sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.
staging:iio:adc:max1363 cleanup regulator handling.
For historical reasons the regulator handling was a little clunky. This
patch brings it inline with a more standard ordering wrt to allocation
of the iio_device.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
For a long while now the max1363 core has selected the
buffer anyway. For a while I meant to make the separation
work again, but given how long it has been it is probably
time to conclude it will never happen and settle for tidying
up what we have.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Jonathan Cameron [Sat, 30 Jun 2012 19:06:00 +0000 (20:06 +0100)]
staging:iio: add a callback buffer for in kernel push interface
This callback buffer is meant to be opaque to users, but basically
adds a very simple pass through buffer to which data may be
pushed when it is inserted into the buffer list.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Torvalds [Sat, 10 Nov 2012 05:59:35 +0000 (06:59 +0100)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Jeff Layton.
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not lookup hashed negative dentry in cifs_atomic_open
cifs: fix potential buffer overrun in cifs.idmap handling code
Linus Torvalds [Sat, 10 Nov 2012 05:58:20 +0000 (06:58 +0100)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 fixes from Catalin Marinas:
- correct argument type (pgprot_t) when calling __ioremap()
- PCI_IOBASE virtual address change
- use architected event for CPU cycle counter
- fix ELF core dumping
- select CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION
- missing completion for secondary CPU boot
- booting on systems with all memory beyond 4GB
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
arm64: mm: fix booting on systems with no memory below 4GB
arm64: smp: add missing completion for secondary boot
arm64: compat: select CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION
arm64: elf: fix core dumping definitions for GP and FP registers
arm64: perf: use architected event for CPU cycle counter
arm64: Move PCI_IOBASE closer to MODULES_VADDR
arm64: Use pgprot_t as the last argument when invoking __ioremap()
Linus Torvalds [Sat, 10 Nov 2012 05:56:21 +0000 (06:56 +0100)]
Merge tag 'stable/for-linus-3.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
"There are three ARM compile fixes (we forgot to export certain
functions and if the drivers are built as an module - we go belly-up).
There is also an mismatch of irq_enter() / exit_idle() calls sequence
which were fixed some time ago in other piece of codes, but failed to
appear in the Xen code.
Lastly a fix for to help in the field with troubleshooting in case we
cannot get the appropriate parameter and also fallback code when
working with very old hypervisors."
Bug-fixes:
- Fix compile issues on ARM.
- Fix hypercall fallback code for old hypervisors.
- Print out which HVM parameter failed if it fails.
- Fix idle notifier call after irq_enter.
* tag 'stable/for-linus-3.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/arm: Fix compile errors when drivers are compiled as modules (export more).
xen/arm: Fix compile errors when drivers are compiled as modules.
xen/generic: Disable fallback build on ARM.
xen/events: fix RCU warning, or Call idle notifier after irq_enter()
xen/hvm: If we fail to fetch an HVM parameter print out which flag it is.
xen/hypercall: fix hypercall fallback code for very old hypervisors
David S. Miller [Sat, 10 Nov 2012 04:53:32 +0000 (20:53 -0800)]
sparc64: Fix build with mix of modular vs. non-modular crypto drivers.
We tried linking in a single built object to hold the device table,
but only works if all of the sparc64 crypto modules get built the same
way (modular vs. non-modular).
Just include the device ID stub into each driver source file so that
the table gets compiled into the correct result in all cases.
Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Tue, 6 Nov 2012 00:12:03 +0000 (00:12 +0000)]
of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again
This bug-fix makes sure that of_address_to_resource is defined extern for sparc
so that the sparc-specific implementation of of_address_to_resource() is once
again used when including include/linux/of_address.h in a sparc context. A
number of drivers in mainline relies on this function working for sparc.
The bug was introduced in a850a7554442f08d3e910c6eeb4ee216868dda1e, "of/address:
add empty static inlines for !CONFIG_OF". Contrary to that commit title, the
static inlines are added for !CONFIG_OF_ADDRESS, and CONFIG_OF_ADDRESS is never
defined for sparc. This is good behavior for the other functions in
include/linux/of_address.h, as the extern functions defined in
drivers/of/address.c only gets linked when OF_ADDRESS is configured. However,
for of_address_to_resource there exists a sparc-specific implementation in
arch/sparc/arch/sparc/kernel/of_device_common.c
Solution suggested by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Tue, 30 Oct 2012 00:09:46 +0000 (00:09 +0000)]
sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq
If an irq is being unlinked concurrently with leon_handle_ext_irq,
irq_map[eirq] might be null in leon_handle_ext_irq. Make sure that
this is not dereferenced.
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Larsson [Mon, 29 Oct 2012 23:26:56 +0000 (23:26 +0000)]
sparc: Add sparc support for platform_get_irq()
This adds sparc support for platform_get_irq that in the normal case use
platform_get_resource() to get an irq. This standard approach fails for sparc as
there are no resources of type IORESOURCE_IRQ for irqs for sparc.
Cross platform drivers can then use this standard platform function and work on
sparc instead of having to have a special case for sparc.
Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Dongsheng [Fri, 9 Nov 2012 04:43:51 +0000 (04:43 +0000)]
gianfar: ethernet vanishes after restoring from hibernation
If a gianfar ethernet device is down prior to hibernating a
system, it will no longer be present upon system restore.
For example:
~# ifconfig eth0 down
~# echo disk > /sys/power/state
<trigger a restore from hibernation>
~# ifconfig eth0 up
SIOCSIFFLAGS: No such device
This happens because the restore function bails out early upon
finding devices that were not up at hibernation. In doing so,
it never gets to the netif_device_attach call at the end of
the restore function. Adding the netif_device_attach as done
here also makes the gfar_restore code consistent with what is
done in the gfar_resume code.
Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
usbnet: ratelimit kevent may have been dropped warnings
when something goes wrong, a flood of these messages can be
generated by usbnet (thousands per second). This doesn't
generally *help* the condition so this patch ratelimits the
rate of their generation.
There's an underlying problem in usbnet's kevent deferral
mechanism which needs fixing, specifically that events *can*
get dropped and not handled. This patch doesn't address this,
but just mitigates fallout caused by the current implemention.
Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: send unsolicited neighbour advertisements to all-nodes
As documented in RFC4861 (Neighbor Discovery for IP version 6) 7.2.6.,
unsolicited neighbour advertisements should be sent to the all-nodes
multicast address.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 9 Nov 2012 20:35:51 +0000 (21:35 +0100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes (again) from Dave Airlie:
"dropped the ball on a vmware patch, so two more fixes for vmwgfx are
here, one for hibernate issue, one for a BUG trigger."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory
drm/vmwgfx: Fix hibernation device reset
Linus Torvalds [Fri, 9 Nov 2012 20:33:53 +0000 (21:33 +0100)]
Merge tag '3.7-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Power management:
- PCI/PM: Fix proc config reg access for D3cold and bridge
suspending
- PCI/PM: Resume device before shutdown
- PCI/PM: Fix deadlock when unbinding device if parent in D3cold
Hotplug:
- PCI/portdrv: Don't create hotplug slots unless port supports
hotplug"
* tag '3.7-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/portdrv: Don't create hotplug slots unless port supports hotplug
PCI/PM: Fix proc config reg access for D3cold and bridge suspending
PCI/PM: Resume device before shutdown
PCI/PM: Fix deadlock when unbinding device if parent in D3cold
Linus Torvalds [Fri, 9 Nov 2012 20:32:33 +0000 (21:32 +0100)]
Merge tag 'mmc-fixes-for-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC fixes from Chris Ball:
- sdhci: fix a NULL dereference at resume-time, seen on OLPC XO-4
- sdhci: fix against 3.7-rc1 for UHS modes without a vqmmc regulator
- sdhci-of-esdhc: disable CMD23 on boards where it's broken
- sdhci-s3c: fix against 3.7-rc1 for card detection with runtime PM
- dw_mmc, omap_hsmmc: fix potential NULL derefs, compiler warnings
* tag 'mmc-fixes-for-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: sdhci-s3c: fix the card detection in runtime-pm
mmc: sdhci-s3c: use clk_prepare_enable and clk_disable_unprepare
mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-end
mmc: dw_mmc: fix modular build for exynos back-end
mmc: sdhci: fix NULL dereference in sdhci_request() tuning
mmc: sdhci: fix IS_ERR() checking of regulator_get()
mmc: fix sdhci-dove probe/removal
mmc: sh_mmcif: fix use after free
mmc: sdhci-pci: fix 'Invalid iomem size' error message condition
mmc: mxcmmc: Fix MODULE_ALIAS
mmc: omap_hsmmc: fix NULL pointer dereference for dt boot
mmc: omap_hsmmc: fix host reference after mmc_free_host
mmc: dw_mmc: fix multiple drv_data NULL dereferences
mmc: dw_mmc: enable controller interrupt before calling mmc_start_host
mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCs
mmc: dw_mmc: remove _dev_info compile warning
mmc: dw_mmc: convert the variable type of irq
Pull crypto fix from Herbert Xu:
"This push fixes a potential panic in cryptd which may occur with
crypto drivers such as aesni-intel."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cryptd - disable softirqs in cryptd_queue_worker to prevent data corruption
Linus Torvalds [Fri, 9 Nov 2012 17:08:04 +0000 (18:08 +0100)]
Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Most of commits are for stable and regression fixes. Except for one
fix for a regression in 3.7-rc4, there are all driver local changes,
so nothing too much to worry."
* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: Fix card refcount unbalance
ALSA: hda - Add new codec ALC668 and ALC900 (default name ALC1150)
ALSA: hda - Improve HP depop when system enter to S3
ALSA: usb-audio: Fix crash at re-preparing the PCM stream
ALSA: hdspm - Fix sync check reporting on RME RayDAT
ALSA: hda - Add pin fixups for ASUS G75
ALSA: hda - Fix invalid connections in VT1802 codec
ALSA: hda - Fix empty DAC filling in patch_via.c
ALSA: hda - Force to reset IEC958 status bits for AD codecs
ALSA: es1968: Add ESS vendor ID to pm_whitelist
ALSA: HDA: Mark CS260x immutable structures const
ALSA: HDA: Fix digital microphone on CS420x
ALSA: hda: Cirrus: Fix coefficient index for beep configuration
ALSA: hda - support Teradici 2200 host card audio
ALSA: Fix typo in drivers sound
xen/arm: Fix compile errors when drivers are compiled as modules (export more).
The commit 911dec0db4de6ccc544178a8ddaf9cec0a11d533
"xen/arm: Fix compile errors when drivers are compiled as modules." exports
the neccessary functions. But to guard ourselves against out-of-tree modules
and future drivers hitting this, lets export all of the relevant
hypercalls.
drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Cc: stable@vger.kernel.org Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie <airlied@redhat.com>
The device would not reset properly when resuming from hibernation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com> Cc: stable@vger.kernel.org Cc: linux-graphics-maintainer@vmware.com Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Fri, 9 Nov 2012 05:59:04 +0000 (06:59 +0100)]
Merge tag 'pinctrl-for-v3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl fixes from Linus Walleij:
- A set of SPEAr pinctrl fixes that recently arrived
- A fixup for the Samsung/Exynos Kconfig deps
* tag 'pinctrl-for-v3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: samsung and exynos need to depend on OF && GPIOLIB
pinctrl: SPEAr1340: Add clcd sleep mode pin configuration
pinctrl: SPEAr1340: Make DDR reset & clock pads as gpio
pinctrl: SPEAr1310: add register entries for enabling pad direction
pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin group
pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFT
pinctrl: SPEAr1310: fix clcd high resolution pin group name
pinctrl: SPEAr320: Correct pad mux entries for rmii/smii
pinctrl: SPEAr3xx: correct register space to configure pwm
pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disable
Linus Torvalds [Fri, 9 Nov 2012 05:57:56 +0000 (06:57 +0100)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes. I keep the fingers crossed that we now got
transparent huge pages ready for prime time."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix length calculation in idset.c
s390/sclp: fix addressing mode clobber
s390: Move css limits from drivers/s390/cio/ to include/asm/.
s390/thp: respect page protection in pmd_none() and pmd_present()
s390/mm: use pmd_large() instead of pmd_huge()
s390/cio: suppress 2nd path verification during resume
Linus Torvalds [Fri, 9 Nov 2012 05:56:23 +0000 (06:56 +0100)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"This reverts a patch that causes regression in binding between HID
devices and drivers during device unplug/replug cycle."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hidraw: put old deallocation mechanism in place
Linus Torvalds [Fri, 9 Nov 2012 05:53:02 +0000 (06:53 +0100)]
Merge branch 'akpm' (Fixes from Andrew)
Merge misc fixes from Andrew Morton:
"Five fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (5 patches)
h8300: add missing L1_CACHE_SHIFT
mm: bugfix: set current->reclaim_state to NULL while returning from kswapd()
fanotify: fix missing break
revert "epoll: support for disabling items, and a self-test app"
checkpatch: improve network block comment style checking
Linus Torvalds [Fri, 9 Nov 2012 05:49:24 +0000 (06:49 +0100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just radeon and nouveau, mostly regressions fixers, and a couple of
radeon register checker fixes."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: fix acpi edid retrieval
drm/nvc0/disp: fix regression in vblank semaphore release
drm/nv40/mpeg: fix context handling
drm/nv40/graph: fix typo in type names
drm/nv41/vm: fix typo in type name
drm/radeon/si: add some missing regs to the VM reg checker
drm/radeon/cayman: add some missing regs to the VM reg checker
drm/radeon/dce3: switch back to old pll allocation order for discrete
projects / ~andy / linux / log