From: Kishon Vijay Abraham I Date: Thu, 6 Sep 2012 14:57:08 +0000 (+0530) Subject: usb: twl6030: Add dt support for twl6030 usb X-Git-Tag: v3.7-rc1~158^2~4^2~8 X-Git-Url: http://pileus.org/git/?a=commitdiff_plain;h=ff0a1f39400a8d2c02343bd22d295517d72e58ec;p=~andy%2Flinux usb: twl6030: Add dt support for twl6030 usb Add device tree support for twl6030 usb driver. Update the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt new file mode 100644 index 00000000000..930f9ff2952 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt @@ -0,0 +1,21 @@ +USB COMPARATOR OF TWL CHIPS + +TWL6030 USB COMPARATOR + - compatible : Should be "ti,twl6030-usb" + - interrupts : Two interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts when + the controller has to act as host and the second interrupt number is the + usb interrupt number that raises VBUS interrupts when the controller has to + act as device + - usb-supply : phandle to the regulator device tree node. It should be vusb + if it is twl6030 or ldousb if it is twl6025 subclass. + +twl6030-usb { + compatible = "ti,twl6030-usb"; + interrupts = < 4 10 >; +}; + +Board specific device node entry +&twl6030-usb { + usb-supply = <&vusb>; +}; diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 32525bb667e..fcadef7864f 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -105,7 +105,7 @@ struct twl6030_usb { u8 asleep; bool irq_enabled; bool vbus_enable; - unsigned long features; + const char *regulator; }; #define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) @@ -153,13 +153,6 @@ static int twl6030_start_srp(struct phy_companion *comparator) static int twl6030_usb_ldo_init(struct twl6030_usb *twl) { - char *regulator_name; - - if (twl->features & TWL6025_SUBCLASS) - regulator_name = "ldousb"; - else - regulator_name = "vusb"; - /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); @@ -169,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl) /* Program MISC2 register and set bit VUSB_IN_VBAT */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - twl->usb3v3 = regulator_get(twl->dev, regulator_name); + twl->usb3v3 = regulator_get(twl->dev, twl->regulator); if (IS_ERR(twl->usb3v3)) return -ENODEV; @@ -322,9 +315,9 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) u32 ret; struct twl6030_usb *twl; int status, err; - struct twl4030_usb_data *pdata; - struct device *dev = &pdev->dev; - pdata = dev->platform_data; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct twl4030_usb_data *pdata = dev->platform_data; twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); if (!twl) @@ -333,7 +326,6 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) twl->dev = &pdev->dev; twl->irq1 = platform_get_irq(pdev, 0); twl->irq2 = platform_get_irq(pdev, 1); - twl->features = pdata->features; twl->linkstat = OMAP_MUSB_UNKNOWN; twl->comparator.set_vbus = twl6030_set_vbus; @@ -345,6 +337,18 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) return -EPROBE_DEFER; } + if (np) { + twl->regulator = "usb"; + } else if (pdata) { + if (pdata->features & TWL6025_SUBCLASS) + twl->regulator = "ldousb"; + else + twl->regulator = "vusb"; + } else { + dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); + return -EINVAL; + } + /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -406,12 +410,21 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl6030_usb_id_table[] = { + { .compatible = "ti,twl6030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); +#endif + static struct platform_driver twl6030_usb_driver = { .probe = twl6030_usb_probe, .remove = __exit_p(twl6030_usb_remove), .driver = { .name = "twl6030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl6030_usb_id_table), }, };