From: Steven Toth Date: Sun, 10 May 2009 00:17:28 +0000 (-0300) Subject: V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon X-Git-Tag: v2.6.32-rc1~618^2~149 X-Git-Url: http://pileus.org/git/?a=commitdiff_plain;h=443c1228d50518f3c550e1fef490a2c9d9246ce7;p=~andy%2Flinux V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon This patch adds support for all of the known shipping Hauppauge HVR-2200 and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this time. Both tuners are supported. Volatiles and typedefs need rework, the rest is coding style compliant. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/video4linux/CARDLIST.saa7164 b/Documentation/video4linux/CARDLIST.saa7164 new file mode 100644 index 00000000000..d1e8217e436 --- /dev/null +++ b/Documentation/video4linux/CARDLIST.saa7164 @@ -0,0 +1,8 @@ + 0 -> Unknown + 1 -> Generic Rev2 + 2 -> Generic Rev3 + 3 -> Hauppauge WinTV-HVR2250 [0070:8880,0070:8810] + 4 -> Hauppauge WinTV-HVR2200 [0070:8980] + 5 -> Hauppauge WinTV-HVR2200 [0070:8900] + 6 -> Hauppauge WinTV-HVR2200 [0070:8901] + 7 -> Hauppauge WinTV-HVR2250 [0070:88A1,0070:8891] diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 1d758525d23..e01b759faf5 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -690,6 +690,8 @@ source "drivers/media/video/ivtv/Kconfig" source "drivers/media/video/cx18/Kconfig" +source "drivers/media/video/saa7164/Kconfig" + config VIDEO_M32R_AR tristate "AR devices" depends on M32R && VIDEO_V4L1 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 9f2e3214a48..1dddea1ada5 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -157,6 +157,7 @@ obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ +obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o diff --git a/drivers/media/video/saa7164/Kconfig b/drivers/media/video/saa7164/Kconfig new file mode 100644 index 00000000000..582556792bd --- /dev/null +++ b/drivers/media/video/saa7164/Kconfig @@ -0,0 +1,19 @@ +config VIDEO_SAA7164 + tristate "NXP SAA7164 support" + depends on DVB_CORE && PCI && I2C + depends on HOTPLUG # due to FW_LOADER + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEOBUF_DVB + select DVB_TDA10048 if !DVB_FE_CUSTOMISE + select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE + ---help--- + This is a video4linux driver for NXP SAA7164 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called saa7164 + diff --git a/drivers/media/video/saa7164/Makefile b/drivers/media/video/saa7164/Makefile new file mode 100644 index 00000000000..4b329fd42ad --- /dev/null +++ b/drivers/media/video/saa7164/Makefile @@ -0,0 +1,12 @@ +saa7164-objs := saa7164-cards.o saa7164-core.o saa7164-i2c.o saa7164-dvb.o \ + saa7164-fw.o saa7164-bus.o saa7164-cmd.o saa7164-api.o \ + saa7164-buffer.o + +obj-$(CONFIG_VIDEO_SAA7164) += saa7164.o + +EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/common/tuners +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends + +EXTRA_CFLAGS += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c new file mode 100644 index 00000000000..8cef1df9b54 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-api.c @@ -0,0 +1,619 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode) +{ + int ret; + + ret = saa7164_cmd_send(port->dev, port->hwcfg.unitid, SET_CUR, + SAA_STATE_CONTROL, sizeof(mode), &mode); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version) +{ + int ret; + + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_FW_VERSION_CONTROL, sizeof(u32), version); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + return ret; +} + +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen) +{ + u8 reg[] = { 0x0f, 0x00 }; + + if (buflen < 128) + return -ENOMEM; + + /* Assumption: Hauppauge eeprom is at 0xa0 on on bus 0 */ + /* TODO: Pull the details from the boards struct */ + return saa7164_api_i2c_read(&dev->i2c_bus[0], 0xa0 >> 1, sizeof(reg), + ®[0], 128, buf); +} + +/* Exercise the i2c interface, saa7164_cmd()/bus() layers: + * 1. Read the identity byte from each of the demodulators. + * 2. Read the entire register set from the TDA18271. + * TODO: This function has no purpose other than to exercise i2c. + */ +int saa7164_api_test(struct saa7164_dev *dev) +{ + /* TDA10048 identities */ + u8 reg[] = { 0x00 }; + u8 data[256]; + dprintk(DBGLVL_API, "%s()\n", __func__); + /* Read all 39 bytes from the TDA18271 tuners */ + saa7164_api_i2c_read(&dev->i2c_bus[1], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + saa7164_api_i2c_read(&dev->i2c_bus[2], 0xc0 >> 1, 0, + ®[0], 39, &data[0]); + + return 0; +} + +int saa7164_api_configure_port_mpeg2ts(struct saa7164_dev *dev, + struct saa7164_tsport *port, + tmComResTSFormatDescrHeader_t *tsfmt) +{ + dprintk(DBGLVL_API, " bFormatIndex = 0x%x\n", tsfmt->bFormatIndex); + dprintk(DBGLVL_API, " bDataOffset = 0x%x\n", tsfmt->bDataOffset); + dprintk(DBGLVL_API, " bPacketLength= 0x%x\n", tsfmt->bPacketLength); + dprintk(DBGLVL_API, " bStrideLength= 0x%x\n", tsfmt->bStrideLength); + dprintk(DBGLVL_API, " bguid = (....)\n"); + + /* Cache the hardware configuration in the port */ + + port->bufcounter = port->hwcfg.BARLocation; + port->pitch = port->hwcfg.BARLocation + (2 * sizeof(u32)); + port->bufsize = port->hwcfg.BARLocation + (3 * sizeof(u32)); + port->bufoffset = port->hwcfg.BARLocation + (4 * sizeof(u32)); + port->bufptr32l = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount) + sizeof(u32); + port->bufptr32h = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + port->bufptr64 = port->hwcfg.BARLocation + + (4 * sizeof(u32)) + + (sizeof(u32) * port->hwcfg.buffercount); + dprintk(DBGLVL_API, " = port->hwcfg.BARLocation = 0x%x\n", + port->hwcfg.BARLocation); + + dprintk(DBGLVL_API, " = VS_FORMAT_MPEGTS (becomes dev->ts[%d])\n", + port->nr); + + return 0; +} + +int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len) +{ + struct saa7164_tsport *port = 0; + u32 idx, next_offset; + int i; + tmComResDescrHeader_t *hdr, *t; + tmComResExtDevDescrHeader_t *exthdr; + tmComResPathDescrHeader_t *pathhdr; + tmComResAntTermDescrHeader_t *anttermhdr; + tmComResTunerDescrHeader_t *tunerunithdr; + tmComResDMATermDescrHeader_t *vcoutputtermhdr; + tmComResTSFormatDescrHeader_t *tsfmt; + u32 currpath = 0; + + dprintk(DBGLVL_API, + "%s(?,?,%d) sizeof(tmComResDescrHeader_t) = %lu bytes\n", + __func__, len, sizeof(tmComResDescrHeader_t)); + + for (idx = 0; idx < (len - sizeof(tmComResDescrHeader_t)); ) { + + hdr = (tmComResDescrHeader_t *)(buf + idx); + + if (hdr->type != CS_INTERFACE) + return SAA_ERR_NOT_SUPPORTED; + + dprintk(DBGLVL_API, "@ 0x%x = \n", idx); + switch (hdr->subtype) { + case GENERAL_REQUEST: + dprintk(DBGLVL_API, " GENERAL_REQUEST\n"); + break; + case VC_TUNER_PATH: + dprintk(DBGLVL_API, " VC_TUNER_PATH\n"); + pathhdr = (tmComResPathDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " pathid = 0x%x\n", + pathhdr->pathid); + currpath = pathhdr->pathid; + break; + case VC_INPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_INPUT_TERMINAL\n"); + anttermhdr = + (tmComResAntTermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " terminalid = 0x%x\n", + anttermhdr->terminalid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + anttermhdr->terminaltype); + switch (anttermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + anttermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + anttermhdr->assocterminal); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + anttermhdr->iterminal); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + anttermhdr->controlsize); + break; + case VC_OUTPUT_TERMINAL: + dprintk(DBGLVL_API, " VC_OUTPUT_TERMINAL\n"); + vcoutputtermhdr = + (tmComResDMATermDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + vcoutputtermhdr->unitid); + dprintk(DBGLVL_API, " terminaltype = 0x%x\n", + vcoutputtermhdr->terminaltype); + switch (vcoutputtermhdr->terminaltype) { + case ITT_ANTENNA: + dprintk(DBGLVL_API, " = ITT_ANTENNA\n"); + break; + case LINE_CONNECTOR: + dprintk(DBGLVL_API, " = LINE_CONNECTOR\n"); + break; + case SPDIF_CONNECTOR: + dprintk(DBGLVL_API, " = SPDIF_CONNECTOR\n"); + break; + case COMPOSITE_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPOSITE_CONNECTOR\n"); + break; + case SVIDEO_CONNECTOR: + dprintk(DBGLVL_API, " = SVIDEO_CONNECTOR\n"); + break; + case COMPONENT_CONNECTOR: + dprintk(DBGLVL_API, + " = COMPONENT_CONNECTOR\n"); + break; + case STANDARD_DMA: + dprintk(DBGLVL_API, " = STANDARD_DMA\n"); + break; + default: + dprintk(DBGLVL_API, " = undefined (0x%x)\n", + vcoutputtermhdr->terminaltype); + } + dprintk(DBGLVL_API, " assocterminal= 0x%x\n", + vcoutputtermhdr->assocterminal); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + vcoutputtermhdr->sourceid); + dprintk(DBGLVL_API, " iterminal = 0x%x\n", + vcoutputtermhdr->iterminal); + dprintk(DBGLVL_API, " BARLocation = 0x%x\n", + vcoutputtermhdr->BARLocation); + dprintk(DBGLVL_API, " flags = 0x%x\n", + vcoutputtermhdr->flags); + dprintk(DBGLVL_API, " interruptid = 0x%x\n", + vcoutputtermhdr->interruptid); + dprintk(DBGLVL_API, " buffercount = 0x%x\n", + vcoutputtermhdr->buffercount); + dprintk(DBGLVL_API, " metadatasize = 0x%x\n", + vcoutputtermhdr->metadatasize); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + vcoutputtermhdr->controlsize); + dprintk(DBGLVL_API, " numformats = 0x%x\n", + vcoutputtermhdr->numformats); + + t = (tmComResDescrHeader_t *) + ((tmComResDMATermDescrHeader_t *)(buf + idx)); + next_offset = idx + (vcoutputtermhdr->len); + for (i = 0; i < vcoutputtermhdr->numformats; i++) { + t = (tmComResDescrHeader_t *) + (buf + next_offset); + switch (t->subtype) { + case VS_FORMAT_MPEG2TS: + tsfmt = + (tmComResTSFormatDescrHeader_t *)t; + if (currpath == 1) + port = &dev->ts1; + else + port = &dev->ts2; + memcpy(&port->hwcfg, vcoutputtermhdr, + sizeof(*vcoutputtermhdr)); + saa7164_api_configure_port_mpeg2ts(dev, + port, tsfmt); + break; + case VS_FORMAT_MPEG2PS: + dprintk(DBGLVL_API, + " = VS_FORMAT_MPEG2PS\n"); + break; + case VS_FORMAT_VBI: + dprintk(DBGLVL_API, + " = VS_FORMAT_VBI\n"); + break; + case VS_FORMAT_RDS: + dprintk(DBGLVL_API, + " = VS_FORMAT_RDS\n"); + break; + case VS_FORMAT_UNCOMPRESSED: + dprintk(DBGLVL_API, + " = VS_FORMAT_UNCOMPRESSED\n"); + break; + case VS_FORMAT_TYPE: + dprintk(DBGLVL_API, + " = VS_FORMAT_TYPE\n"); + break; + default: + dprintk(DBGLVL_API, + " = undefined (0x%x)\n", + t->subtype); + } + next_offset += t->len; + } + + break; + case TUNER_UNIT: + dprintk(DBGLVL_API, " TUNER_UNIT\n"); + tunerunithdr = + (tmComResTunerDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + tunerunithdr->unitid); + dprintk(DBGLVL_API, " sourceid = 0x%x\n", + tunerunithdr->sourceid); + dprintk(DBGLVL_API, " iunit = 0x%x\n", + tunerunithdr->iunit); + dprintk(DBGLVL_API, " tuningstandards = 0x%x\n", + tunerunithdr->tuningstandards); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + tunerunithdr->controlsize); + dprintk(DBGLVL_API, " controls = 0x%x\n", + tunerunithdr->controls); + break; + case VC_SELECTOR_UNIT: + dprintk(DBGLVL_API, " VC_SELECTOR_UNIT\n"); + break; + case VC_PROCESSING_UNIT: + dprintk(DBGLVL_API, " VC_PROCESSING_UNIT\n"); + break; + case FEATURE_UNIT: + dprintk(DBGLVL_API, " FEATURE_UNIT\n"); + break; + case ENCODER_UNIT: + dprintk(DBGLVL_API, " ENCODER_UNIT\n"); + break; + case EXTENSION_UNIT: + dprintk(DBGLVL_API, " EXTENSION_UNIT\n"); + exthdr = (tmComResExtDevDescrHeader_t *)(buf + idx); + dprintk(DBGLVL_API, " unitid = 0x%x\n", + exthdr->unitid); + dprintk(DBGLVL_API, " deviceid = 0x%x\n", + exthdr->deviceid); + dprintk(DBGLVL_API, " devicetype = 0x%x\n", + exthdr->devicetype); + if (exthdr->devicetype & 0x1) + dprintk(DBGLVL_API, " = Decoder Device\n"); + if (exthdr->devicetype & 0x2) + dprintk(DBGLVL_API, " = GPIO Source\n"); + if (exthdr->devicetype & 0x4) + dprintk(DBGLVL_API, " = Video Decoder\n"); + if (exthdr->devicetype & 0x8) + dprintk(DBGLVL_API, " = Audio Decoder\n"); + if (exthdr->devicetype & 0x20) + dprintk(DBGLVL_API, " = Crossbar\n"); + if (exthdr->devicetype & 0x40) + dprintk(DBGLVL_API, " = Tuner\n"); + if (exthdr->devicetype & 0x80) + dprintk(DBGLVL_API, " = IF PLL\n"); + if (exthdr->devicetype & 0x100) + dprintk(DBGLVL_API, " = Demodulator\n"); + if (exthdr->devicetype & 0x200) + dprintk(DBGLVL_API, " = RDS Decoder\n"); + if (exthdr->devicetype & 0x400) + dprintk(DBGLVL_API, " = Encoder\n"); + if (exthdr->devicetype & 0x800) + dprintk(DBGLVL_API, " = IR Decoder\n"); + if (exthdr->devicetype & 0x1000) + dprintk(DBGLVL_API, " = EEPROM\n"); + if (exthdr->devicetype & 0x2000) + dprintk(DBGLVL_API, + " = VBI Decoder\n"); + if (exthdr->devicetype & 0x10000) + dprintk(DBGLVL_API, + " = Streaming Device\n"); + if (exthdr->devicetype & 0x20000) + dprintk(DBGLVL_API, + " = DRM Device\n"); + if (exthdr->devicetype & 0x40000000) + dprintk(DBGLVL_API, + " = Generic Device\n"); + if (exthdr->devicetype & 0x80000000) + dprintk(DBGLVL_API, + " = Config Space Device\n"); + dprintk(DBGLVL_API, " numgpiopins = 0x%x\n", + exthdr->numgpiopins); + dprintk(DBGLVL_API, " numgpiogroups = 0x%x\n", + exthdr->numgpiogroups); + dprintk(DBGLVL_API, " controlsize = 0x%x\n", + exthdr->controlsize); + break; + case PVC_INFRARED_UNIT: + dprintk(DBGLVL_API, " PVC_INFRARED_UNIT\n"); + break; + case DRM_UNIT: + dprintk(DBGLVL_API, " DRM_UNIT\n"); + break; + default: + dprintk(DBGLVL_API, "default %d\n", hdr->subtype); + } + + dprintk(DBGLVL_API, " 1.%x\n", hdr->len); + dprintk(DBGLVL_API, " 2.%x\n", hdr->type); + dprintk(DBGLVL_API, " 3.%x\n", hdr->subtype); + dprintk(DBGLVL_API, " 4.%x\n", hdr->unitid); + + idx += hdr->len; + } + + return 0; +} + +int saa7164_api_enum_subdevs(struct saa7164_dev *dev) +{ + int ret; + u32 buflen = 0; + u8 *buf; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + /* Get the total descriptor length */ + ret = saa7164_cmd_send(dev, 0, GET_LEN, + GET_DESCRIPTORS_CONTROL, sizeof(buflen), &buflen); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + + dprintk(DBGLVL_API, "%s() total descriptor size = %d bytes.\n", + __func__, buflen); + + /* Allocate enough storage for all of the descs */ + buf = kzalloc(buflen, GFP_KERNEL); + if (buf == NULL) + return SAA_ERR_NO_RESOURCES; + + /* Retrieve them */ + ret = saa7164_cmd_send(dev, 0, GET_CUR, + GET_DESCRIPTORS_CONTROL, buflen, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret); + goto out; + } + + if (debug & DBGLVL_API) + saa7164_dumphex16(dev, buf, (buflen/16)*16); + + saa7164_api_dump_subdevs(dev, buf, buflen); + +out: + kfree(buf); + return ret; +} + +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + u32 regval; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if (reglen > 4) + return -EIO; + + if (reglen == 1) + regval = *(reg); + else + if (reglen == 2) + regval = ((*(reg) << 8) || *(reg+1)); + else + if (reglen == 3) + regval = ((*(reg) << 16) | (*(reg+1) << 8) | *(reg+2)); + else + if (reglen == 4) + regval = ((*(reg) << 24) | (*(reg+1) << 16) | + (*(reg+2) << 8) | *(reg+3)); + + /* Prepare the send buffer */ + /* Bytes 00-03 source register length + * 04-07 source bytes to read + * 08... register address + */ + memset(buf, 0, sizeof(buf)); + memcpy((buf + 2 * sizeof(u32) + 0), reg, reglen); + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen; + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, 2 * 16); + + ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + else { + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen); + } + + return ret == SAA_OK ? 0 : -EIO; +} + +/* For a given 8 bit i2c address device, write the buffer */ +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen, + u8 *data) +{ + struct saa7164_dev *dev = bus->dev; + u16 len = 0; + int unitid; + int reglen; + u8 buf[256]; + int ret; + + dprintk(DBGLVL_API, "%s()\n", __func__); + + if ((datalen == 0) || (datalen > 232)) + return -EIO; + + memset(buf, 0, sizeof(buf)); + + unitid = saa7164_i2caddr_to_unitid(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr 0x%x to unitid\n", + __func__, addr); + return -EIO; + } + + reglen = saa7164_i2caddr_to_reglen(bus, addr); + if (unitid < 0) { + printk(KERN_ERR + "%s() error, cannot translate regaddr to reglen\n", + __func__); + return -EIO; + } + + ret = saa7164_cmd_send(bus->dev, unitid, GET_LEN, + EXU_REGISTER_ACCESS_CONTROL, sizeof(len), &len); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret); + return -EIO; + } + + dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len); + + /* Prepare the send buffer */ + /* Bytes 00-03 dest register length + * 04-07 dest bytes to write + * 08... register address + */ + *((u32 *)(buf + 0 * sizeof(u32))) = reglen; + *((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen; + memcpy((buf + 2 * sizeof(u32)), data, datalen); + + if (debug & DBGLVL_I2C) + saa7164_dumphex16(dev, buf, sizeof(buf)); + + ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR, + EXU_REGISTER_ACCESS_CONTROL, len, &buf); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret); + + return ret == SAA_OK ? 0 : -EIO; +} + + +int saa7164_api_modify_gpio(struct saa7164_dev *dev, u8 unitid, + u8 pin, u8 state) +{ + int ret; + tmComResGPIO_t t; + + dprintk(DBGLVL_API, "%s(0x%x, %d, %d)\n", + __func__, unitid, pin, state); + + if ((pin > 7) || (state > 2)) + return SAA_ERR_BAD_PARAMETER; + + t.pin = pin; + t.state = state; + + ret = saa7164_cmd_send(dev, unitid, SET_CUR, + EXU_GPIO_CONTROL, sizeof(t), &t); + if (ret != SAA_OK) + printk(KERN_ERR "%s() error, ret = 0x%x\n", + __func__, ret); + + return ret; +} + +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 1); +} + +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, + u8 pin) +{ + return saa7164_api_modify_gpio(dev, unitid, pin, 0); +} + + + diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c new file mode 100644 index 00000000000..4176544ee01 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-buffer.c @@ -0,0 +1,158 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +/* The PCI address space for buffer handling looks like this: + + +-u32 wide-------------+ + | + + +-u64 wide------------------------------------+ + + + + +----------------------+ + | CurrentBufferPtr + Pointer to current PCI buffer >-+ + +----------------------+ | + | Unused + | + +----------------------+ | + | Pitch + = 188 (bytes) | + +----------------------+ | + | PCI buffer size + = pitch * number of lines (312) | + +----------------------+ | + |0| Buf0 Write Offset + | + +----------------------+ v + |1| Buf1 Write Offset + | + +----------------------+ | + |2| Buf2 Write Offset + | + +----------------------+ | + |3| Buf3 Write Offset + | + +----------------------+ | + ... More write offsets | + +---------------------------------------------+ | + +0| set of ptrs to PCI pagetables + | + +---------------------------------------------+ | + +1| set of ptrs to PCI pagetables + <--------+ + +---------------------------------------------+ + +2| set of ptrs to PCI pagetables + + +---------------------------------------------+ + +3| set of ptrs to PCI pagetables + >--+ + +---------------------------------------------+ | + ... More buffer pointers | +----------------+ + +->| pt[0] TS data | + | +----------------+ + | + | +----------------+ + +->| pt[1] TS data | + | +----------------+ + | etc + */ + +/* Allocate a new buffer structure and associated PCI space in bytes. + * len must be a multiple of sizeof(u64) + */ +struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port, + u32 len) +{ + struct saa7164_buffer *buf = 0; + struct saa7164_dev *dev = port->dev; + int i; + + if ((len == 0) || (len >= 65536) || (len % sizeof(u64))) { + log_warn("%s() SAA_ERR_BAD_PARAMETER\n", __func__); + goto ret; + } + + buf = kzalloc(sizeof(struct saa7164_buffer), GFP_KERNEL); + if (buf == NULL) { + log_warn("%s() SAA_ERR_NO_RESOURCES\n", __func__); + goto ret; + } + + buf->port = port; + buf->flags = SAA7164_BUFFER_FREE; + /* TODO: arg len is being ignored */ + buf->pci_size = SAA7164_PT_ENTRIES * 0x1000; + buf->pt_size = (SAA7164_PT_ENTRIES * sizeof(u64)) + 0x1000; + + /* Allocate contiguous memory */ + buf->cpu = pci_alloc_consistent(port->dev->pci, buf->pci_size, + &buf->dma); + if (!buf->cpu) + goto fail1; + + buf->pt_cpu = pci_alloc_consistent(port->dev->pci, buf->pt_size, + &buf->pt_dma); + if (!buf->pt_cpu) + goto fail2; + + /* init the buffers to a known pattern, easier during debugging */ + memset(buf->cpu, 0xff, buf->pci_size); + memset(buf->pt_cpu, 0xff, buf->pt_size); + + dprintk(DBGLVL_BUF, "%s() allocated buffer @ 0x%p\n", __func__, buf); + dprintk(DBGLVL_BUF, " pci_cpu @ 0x%llx dma @ 0x%llx len = 0x%x\n", + (u64)buf->cpu, (u64)buf->dma, buf->pci_size); + dprintk(DBGLVL_BUF, " pt_cpu @ 0x%llx pt_dma @ 0x%llx len = 0x%x\n", + (u64)buf->pt_cpu, (u64)buf->pt_dma, buf->pt_size); + + /* Format the Page Table Entries to point into the data buffer */ + for (i = 0 ; i < SAA7164_PT_ENTRIES; i++) { + + *(buf->pt_cpu + i) = buf->dma + (i * 0x1000); /* TODO */ + + dprintk(DBGLVL_BUF, " pt[%02d] = 0x%llx -> 0x%llx\n", + i, (u64)buf->pt_cpu, (u64)*(buf->pt_cpu)); + + } + + goto ret; + +fail2: + pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma); +fail1: + kfree(buf); + + buf = 0; +ret: + return buf; +} + +int saa7164_buffer_dealloc(struct saa7164_tsport *port, + struct saa7164_buffer *buf) +{ + struct saa7164_dev *dev = port->dev; + + if ((buf == 0) || (port == 0)) + return SAA_ERR_BAD_PARAMETER; + + dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf); + + if (buf->flags != SAA7164_BUFFER_FREE) + log_warn(" freeing a non-free buffer\n"); + + pci_free_consistent(port->dev->pci, buf->pci_size, buf->cpu, buf->dma); + pci_free_consistent(port->dev->pci, buf->pt_size, buf->pt_cpu, + buf->pt_dma); + + kfree(buf); + + return SAA_OK; +} + diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c new file mode 100644 index 00000000000..28f630dc49c --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-bus.c @@ -0,0 +1,448 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +/* The message bus to/from the firmware is a ring buffer in PCI address + * space. Establish the defaults. + */ +int saa7164_bus_setup(struct saa7164_dev *dev) +{ + tmComResBusInfo_t *b = &dev->bus; + + mutex_init(&b->lock); + + b->Type = TYPE_BUS_PCIe; + b->m_wMaxReqSize = SAA_DEVICE_MAXREQUESTSIZE; + + b->m_pdwSetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.CommandRing)); + + b->m_dwSizeSetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_pdwGetRing = (u8 *)(dev->bmmio + + ((u32)dev->busdesc.ResponseRing)); + + b->m_dwSizeGetRing = SAA_DEVICE_BUFFERBLOCKSIZE; + + b->m_pdwSetWritePos = (u32 *)((u8 *)(dev->bmmio + + ((u32)dev->intfdesc.BARLocation) + (2 * sizeof(u64)))); + + b->m_pdwSetReadPos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 1 * sizeof(u32)); + + b->m_pdwGetWritePos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 2 * sizeof(u32)); + + b->m_pdwGetReadPos = (u32 *)((u8 *)b->m_pdwSetWritePos + + 3 * sizeof(u32)); + + return 0; +} + +void saa7164_bus_dump(struct saa7164_dev *dev) +{ + tmComResBusInfo_t *b = &dev->bus; + + dprintk(DBGLVL_BUS, "Dumping the bus structure:\n"); + dprintk(DBGLVL_BUS, " .type = %d\n", b->Type); + dprintk(DBGLVL_BUS, " .dev->bmmio = 0x%p\n", dev->bmmio); + dprintk(DBGLVL_BUS, " .m_wMaxReqSize = 0x%x\n", b->m_wMaxReqSize); + dprintk(DBGLVL_BUS, " .m_pdwSetRing = 0x%p\n", b->m_pdwSetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeSetRing = 0x%x\n", b->m_dwSizeSetRing); + dprintk(DBGLVL_BUS, " .m_pdwGetRing = 0x%p\n", b->m_pdwGetRing); + dprintk(DBGLVL_BUS, " .m_dwSizeGetRing = 0x%x\n", b->m_dwSizeGetRing); + + dprintk(DBGLVL_BUS, " .m_pdwSetWritePos = 0x%p (0x%08x)\n", + b->m_pdwSetWritePos, *b->m_pdwSetWritePos); + + dprintk(DBGLVL_BUS, " .m_pdwSetReadPos = 0x%p (0x%08x)\n", + b->m_pdwSetReadPos, *b->m_pdwSetReadPos); + + dprintk(DBGLVL_BUS, " .m_pdwGetWritePos = 0x%p (0x%08x)\n", + b->m_pdwGetWritePos, *b->m_pdwGetWritePos); + + dprintk(DBGLVL_BUS, " .m_pdwGetReadPos = 0x%p (0x%08x)\n", + b->m_pdwGetReadPos, *b->m_pdwGetReadPos); +} + +void saa7164_bus_dumpmsg(struct saa7164_dev *dev, tmComResInfo_t* m, void *buf) +{ + dprintk(DBGLVL_BUS, "Dumping msg structure:\n"); + dprintk(DBGLVL_BUS, " .id = %d\n", m->id); + dprintk(DBGLVL_BUS, " .flags = 0x%x\n", m->flags); + dprintk(DBGLVL_BUS, " .size = 0x%x\n", m->size); + dprintk(DBGLVL_BUS, " .command = 0x%x\n", m->command); + dprintk(DBGLVL_BUS, " .controlselector = 0x%x\n", m->controlselector); + dprintk(DBGLVL_BUS, " .seqno = %d\n", m->seqno); + if (buf) + dprintk(DBGLVL_BUS, " .buffer (ignored)\n"); +} + +/* + * Places a command or a response on the bus. The implementation does not + * know if it is a command or a response it just places the data on the + * bus depending on the bus information given in the tmComResBusInfo_t + * structure. If the command or response does not fit into the bus ring + * buffer it will be refused. + * + * Return Value: + * SAA_OK The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf) +{ + tmComResBusInfo_t *bus = &dev->bus; + u32 bytes_to_write, read_distance, timeout, curr_srp, curr_swp; + u32 new_swp, space_rem; + int ret = SAA_ERR_BAD_PARAMETER; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + dprintk(DBGLVL_BUS, "%s()\n", __func__); + + msg->size = cpu_to_le16(msg->size); + msg->command = cpu_to_le16(msg->command); + msg->controlselector = cpu_to_le16(msg->controlselector); + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return SAA_ERR_BAD_PARAMETER; + } + + if ((msg->size > 0) && (buf == 0)) { + printk(KERN_ERR "%s() Missing message buffer\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Lock the bus from any other access */ + mutex_lock(&bus->lock); + + bytes_to_write = sizeof(*msg) + msg->size; + read_distance = 0; + timeout = SAA_BUS_TIMEOUT; + curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos); + curr_swp = le32_to_cpu(*bus->m_pdwSetWritePos); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* The ring has not wrapped yet */ + read_distance = curr_srp - curr_swp; + else + /* Deal with the wrapped ring */ + read_distance = (curr_srp + bus->m_dwSizeSetRing) - curr_swp; + + dprintk(DBGLVL_BUS, "%s() bytes_to_write = %d\n", __func__, + bytes_to_write); + + dprintk(DBGLVL_BUS, "%s() read_distance = %d\n", __func__, + read_distance); + + dprintk(DBGLVL_BUS, "%s() curr_srp = %x\n", __func__, curr_srp); + dprintk(DBGLVL_BUS, "%s() curr_swp = %x\n", __func__, curr_swp); + + /* Process the msg and write the content onto the bus */ + while (bytes_to_write >= read_distance) { + + if (timeout-- == 0) { + printk(KERN_ERR "%s() bus timeout\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + /* TODO: Review this delay, efficient? */ + /* Wait, allowing the hardware fetch time */ + mdelay(1); + + /* Check the space usage again */ + curr_srp = le32_to_cpu(*bus->m_pdwSetReadPos); + + /* Deal with ring wrapping issues */ + if (curr_srp > curr_swp) + /* Read didn't wrap around the buffer */ + read_distance = curr_srp - curr_swp; + else + /* Deal with the wrapped ring */ + read_distance = (curr_srp + bus->m_dwSizeSetRing) - + curr_swp; + + } + + /* Calculate the new write position */ + new_swp = curr_swp + bytes_to_write; + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + dprintk(DBGLVL_BUS, "%s() bus->m_dwSizeSetRing = %x\n", __func__, + bus->m_dwSizeSetRing); + + /* Mental Note: line 462 tmmhComResBusPCIe.cpp */ + + /* Check if we're going to wrap again */ + if (new_swp > bus->m_dwSizeSetRing) { + + /* Ring wraps */ + new_swp -= bus->m_dwSizeSetRing; + + space_rem = bus->m_dwSizeSetRing - curr_swp; + + dprintk(DBGLVL_BUS, "%s() space_rem = %x\n", __func__, + space_rem); + + dprintk(DBGLVL_BUS, "%s() sizeof(*msg) = %lu\n", __func__, + sizeof(*msg)); + + if (space_rem < sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr4\n", __func__); + + /* Split the msg into pieces as the ring wraps */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, space_rem); + memcpy(bus->m_pdwSetRing, (u8 *)msg + space_rem, + sizeof(*msg) - space_rem); + + memcpy(bus->m_pdwSetRing + sizeof(*msg) - space_rem, + buf, msg->size); + + } else if (space_rem == sizeof(*msg)) { + dprintk(DBGLVL_BUS, "%s() tr5\n", __func__); + + /* Additional data at the beginning of the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing, buf, msg->size); + + } else { + /* Additional data wraps around the ring */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + if (msg->size > 0) { + memcpy(bus->m_pdwSetRing + curr_swp + + sizeof(*msg), buf, space_rem - + sizeof(*msg)); + memcpy(bus->m_pdwSetRing, (u8 *)buf + + space_rem - sizeof(*msg), + bytes_to_write - space_rem); + } + + } + + } /* (new_swp > bus->m_dwSizeSetRing) */ + else { + dprintk(DBGLVL_BUS, "%s() tr6\n", __func__); + + /* The ring buffer doesn't wrap, two simple copies */ + memcpy(bus->m_pdwSetRing + curr_swp, msg, sizeof(*msg)); + memcpy(bus->m_pdwSetRing + curr_swp + sizeof(*msg), buf, + msg->size); + } + + dprintk(DBGLVL_BUS, "%s() new_swp = %x\n", __func__, new_swp); + + /* TODO: Convert all of the volatiles and direct PCI writes into + * saa7164_writel/b calls for consistency. + */ + + /* Update the bus write position */ + *bus->m_pdwSetWritePos = cpu_to_le32(new_swp); + ret = SAA_OK; + +out: + mutex_unlock(&bus->lock); + return ret; +} + +/* + * Receive a command or a response from the bus. The implementation does not + * know if it is a command or a response it simply dequeues the data, + * depending on the bus information given in the tmComResBusInfo_t structure. + * + * Return Value: + * 0 The function executed successfully. + * < 0 One or more members are not initialized. + */ +int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf, + int peekonly) +{ + tmComResBusInfo_t *bus = &dev->bus; + u32 bytes_to_read, write_distance, curr_grp, curr_gwp, + new_grp, buf_size, space_rem; + tmComResInfo_t msg_tmp; + int ret = SAA_ERR_BAD_PARAMETER; + + if (msg == 0) + return ret; + + if (msg->size > dev->bus.m_wMaxReqSize) { + printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n", + __func__); + return ret; + } + + if ((peekonly == 0) && (msg->size > 0) && (buf == 0)) { + printk(KERN_ERR + "%s() Missing msg buf, size should be %d bytes\n", + __func__, msg->size); + return ret; + } + + mutex_lock(&bus->lock); + + /* Peek the bus to see if a msg exists, if it's not what we're expecting + * then return cleanly else read the message from the bus. + */ + curr_gwp = le32_to_cpu(*bus->m_pdwGetWritePos); + curr_grp = le32_to_cpu(*bus->m_pdwGetReadPos); + + if (curr_gwp == curr_grp) { + dprintk(DBGLVL_BUS, "%s() No message on the bus\n", __func__); + ret = SAA_ERR_EMPTY; + goto out; + } + + bytes_to_read = sizeof(*msg); + + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() No message/response found\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)&msg_tmp + space_rem, bus->m_pdwGetRing, + bytes_to_read - space_rem); + + } else { + /* No wrapping */ + memcpy(&msg_tmp, bus->m_pdwGetRing + curr_grp, bytes_to_read); + } + + /* No need to update the read positions, because this was a peek */ + /* If the caller specifically want to peek, return */ + if (peekonly) { + memcpy(msg, &msg_tmp, sizeof(*msg)); + goto peekout; + } + + /* Check if the command/response matches what is expected */ + if ((msg_tmp.id != msg->id) || (msg_tmp.command != msg->command) || + (msg_tmp.controlselector != msg->controlselector) || + (msg_tmp.seqno != msg->seqno) || (msg_tmp.size != msg->size)) { + + printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__); + saa7164_bus_dumpmsg(dev, msg, buf); + saa7164_bus_dumpmsg(dev, &msg_tmp, 0); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Get the actual command and response from the bus */ + buf_size = msg->size; + + bytes_to_read = sizeof(*msg) + msg->size; + /* Calculate write distance to current read position */ + write_distance = 0; + if (curr_gwp >= curr_grp) + /* Write doesn't wrap around the ring */ + write_distance = curr_gwp - curr_grp; + else + /* Write wraps around the ring */ + write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp; + + if (bytes_to_read > write_distance) { + printk(KERN_ERR "%s() Invalid bus state, missing msg " + "or mangled ring, faulty H/W / bad code?\n", __func__); + ret = SAA_ERR_INVALID_COMMAND; + goto out; + } + + /* Calculate the new read position */ + new_grp = curr_grp + bytes_to_read; + if (new_grp > bus->m_dwSizeGetRing) { + + /* Ring wraps */ + new_grp -= bus->m_dwSizeGetRing; + space_rem = bus->m_dwSizeGetRing - curr_grp; + + if (space_rem < sizeof(*msg)) { + /* msg wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, space_rem); + memcpy((u8 *)msg + space_rem, bus->m_pdwGetRing, + sizeof(*msg) - space_rem); + if (buf) + memcpy(buf, bus->m_pdwGetRing + sizeof(*msg) - + space_rem, buf_size); + + } else if (space_rem == sizeof(*msg)) { + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing, buf_size); + } else { + /* Additional data wraps around the ring */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) { + memcpy(buf, bus->m_pdwGetRing + curr_grp + + sizeof(*msg), space_rem - sizeof(*msg)); + memcpy(buf + space_rem - sizeof(*msg), + bus->m_pdwGetRing, bytes_to_read - + space_rem); + } + + } + + } else { + /* No wrapping */ + memcpy(msg, bus->m_pdwGetRing + curr_grp, sizeof(*msg)); + if (buf) + memcpy(buf, bus->m_pdwGetRing + curr_grp + sizeof(*msg), + buf_size); + } + + /* Update the read positions, adjusting the ring */ + *bus->m_pdwGetReadPos = cpu_to_le32(new_grp); + +peekout: + msg->size = le16_to_cpu(msg->size); + msg->command = le16_to_cpu(msg->command); + msg->controlselector = le16_to_cpu(msg->controlselector); + ret = SAA_OK; +out: + mutex_unlock(&bus->lock); + return ret; +} + diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c new file mode 100644 index 00000000000..0678b5f31bd --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-cards.c @@ -0,0 +1,562 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + +#include "saa7164.h" + +/* The Bridge API needs to understand register widths (in bytes) for the + * attached I2C devices, so we can simplify the virtual i2c mechansms + * and keep the -i2c.c implementation clean. + */ +#define REGLEN_8bit 1 +#define REGLEN_16bit 2 + +struct saa7164_board saa7164_boards[] = { + [SAA7164_BOARD_UNKNOWN] = { + /* Bridge will not load any firmware, without knowing + * the rev this would be fatal. */ + .name = "Unknown", + }, + [SAA7164_BOARD_UNKNOWN_REV2] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev2", + .chiprev = SAA7164_CHIP_REV2, + }, + [SAA7164_BOARD_UNKNOWN_REV3] = { + /* Bridge will load the v2 f/w and dump descriptors */ + /* Required during new board bringup */ + .name = "Generic Rev3", + .chiprev = SAA7164_CHIP_REV3, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV2, + .unit = {{ + .id = 0x06, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x20, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x23, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, + [SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = { + .name = "Hauppauge WinTV-HVR2250", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x22, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x07, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x08, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-1 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x24, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x26, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (TOP)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x32 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x29, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "CX24228/S5H1411-2 (QAM)", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x34 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, +}; +const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct saa7164_subid saa7164_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x8880, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8810, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250, + }, { + .subvendor = 0x0070, + .subdevice = 0x8980, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8900, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8901, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_3, + }, { + .subvendor = 0x0070, + .subdevice = 0x88A1, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8891, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, +}; +const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); + +void saa7164_card_list(struct saa7164_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_ERR + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card= insmod option to\n" + "%s: workaround that. Send complaints to the vendor\n" + "%s: of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_ERR + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card= insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + + printk(KERN_ERR "%s: Here are valid choices for the card= insmod " + "option:\n", dev->name); + + for (i = 0; i < saa7164_bcount; i++) + printk(KERN_ERR "%s: card=%d -> %s\n", + dev->name, i, saa7164_boards[i].name); +} + +/* TODO: clean this define up into the -cards.c structs */ +#define PCIEBRIDGE_UNITID 2 + +void saa7164_gpio_setup(struct saa7164_dev *dev) +{ + + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + /* + GPIO 2: s5h1411 / tda10048-1 demod reset + GPIO 3: s5h1411 / tda10048-2 demod reset + GPIO 7: IRBlaster Zilog reset + */ + + /* Reset parts by going in and out of reset */ + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + + msleep(10); + + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2); + saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3); + break; + } + +} + +static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + /* TODO: Assumption: eeprom on bus 0 */ + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 88001: + /* Development board - Limit circulation */ + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + case 88021: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */ + break; + case 88041: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */ + break; + case 88061: + /* WinTV-HVR2250 (PCIe, Retail, full-height bracket) + * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */ + break; + case 89519: + case 89609: + /* WinTV-HVR2200 (PCIe, Retail, full-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + case 89619: + /* WinTV-HVR2200 (PCIe, Retail, half-height) + * DVB-T (TDA18271/TDA10048) and basic analog, no IR */ + break; + default: + printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name, + tv.model); +} + +void saa7164_card_setup(struct saa7164_dev *dev) +{ + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + if (saa7164_api_read_eeprom(dev, &eeprom[0], + sizeof(eeprom)) < 0) + return; + } + + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + hauppauge_eeprom(dev, &eeprom[0]); + break; + } +} + +/* With most other drivers, the kernel expects to communicate with subdrivers + * through i2c. This bridge does not allow that, it does not expose any direct + * access to I2C. Instead we have to communicate through the device f/w for + * register access to 'processing units'. Each unit has a unique + * id, regardless of how the physical implementation occurs across + * the three physical i2c busses. The being said if we want leverge of + * the existing kernel drivers for tuners and demods we have to 'speak i2c', + * to this bridge implements 3 virtual i2c buses. This is a helper function + * for those. + * + * Description: Translate the kernels notion of an i2c address and bus into + * the appropriate unitid. + */ +int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the saa7164 unique + * unitid. < 0 on error */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->id; + } + + return -1; +} + +/* The 7164 API needs to know the i2c register length in advance. + * this is a helper function. Based on a specific chip addr and bus return the + * reg length. + */ +int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr) +{ + /* For a given bus and i2c device address, return the + * saa7164 registry address width. < 0 on error + */ + + struct saa7164_dev *dev = bus->dev; + struct saa7164_unit *unit; + int i; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if ((bus->nr == unit->i2c_bus_nr) && + (addr == unit->i2c_bus_addr)) + return unit->i2c_reg_len; + } + + return -1; +} +/* TODO: implement a 'findeeprom' functio like the above and fix any other + * eeprom related todo's in -api.c. + */ + +/* Translate a unitid into a x readable device name, for display purposes. */ +char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid) +{ + char *undefed = "UNDEFINED"; + char *bridge = "BRIDGE"; + struct saa7164_unit *unit; + int i; + + if (unitid == 0) + return bridge; + + for (i = 0; i < SAA7164_MAX_UNITS; i++) { + unit = &saa7164_boards[dev->board].unit[i]; + + if (unit->type == SAA7164_UNIT_UNDEFINED) + continue; + + if (unitid == unit->id) + return unit->name; + } + + return undefed; +} + diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c new file mode 100644 index 00000000000..0c3585bb232 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -0,0 +1,529 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev) +{ + int i, ret = -1; + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 0) { + dev->cmds[i].inuse = 1; + dev->cmds[i].signalled = 0; + dev->cmds[i].timeout = 0; + ret = dev->cmds[i].seqno; + break; + } + } + mutex_unlock(&dev->lock); + + return ret; +} + +void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].inuse = 0; + dev->cmds[seqno].signalled = 0; + dev->cmds[seqno].timeout = 0; + } + mutex_unlock(&dev->lock); +} + +void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno) +{ + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + dev->cmds[seqno].timeout = 1; + } + mutex_unlock(&dev->lock); +} + +u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno) +{ + int ret = 0; + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + ret = dev->cmds[seqno].timeout; + } + mutex_unlock(&dev->lock); + + return ret; +} + +/* Commands to the f/w get marshelled to/from this code then onto the PCI + * -bus/c running buffer. */ +int saa7164_cmd_dequeue(struct saa7164_dev *dev) +{ + int loop = 1; + int ret; + u32 timeout; + wait_queue_head_t *q = 0; + u8 tmp[512]; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + while (loop) { + + tmComResInfo_t tRsp = { 0, 0, 0, 0, 0, 0 }; + ret = saa7164_bus_get(dev, &tRsp, NULL, 1); + if (ret == SAA_ERR_EMPTY) + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + q = &dev->cmds[tRsp.seqno].wait; + timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); + dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); + if (timeout) { + printk(KERN_ERR "found timed out command on the bus\n"); + + /* Clean the bus */ + ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); + printk(KERN_ERR "ret = %x\n", ret); + if (ret == SAA_ERR_EMPTY) + /* Someone else already fetched the response */ + return SAA_OK; + + if (ret != SAA_OK) + return ret; + + if (tRsp.flags & PVC_CMDFLAG_CONTINUE) + printk(KERN_ERR "split response\n"); + else + saa7164_cmd_free_seqno(dev, tRsp.seqno); + + printk(KERN_ERR " timeout continue\n"); + continue; + } + + dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n", + __func__, tRsp.seqno); + dev->cmds[tRsp.seqno].signalled = 1; + wake_up(q); + return SAA_OK; + } + + return SAA_OK; +} + +int saa7164_cmd_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf) +{ + tmComResBusInfo_t *bus = &dev->bus; + u8 cmd_sent; + u16 size, idx; + u32 cmds; + void *tmp; + int ret = -1; + + if (!msg) { + printk(KERN_ERR "%s() !msg\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + mutex_lock(&dev->cmds[msg->id].lock); + + size = msg->size; + idx = 0; + cmds = size / bus->m_wMaxReqSize; + if (size % bus->m_wMaxReqSize == 0) + cmds -= 1; + + cmd_sent = 0; + + /* Split the request into smaller chunks */ + for (idx = 0; idx < cmds; idx++) { + + msg->flags |= SAA_CMDFLAG_CONTINUE; + msg->size = bus->m_wMaxReqSize; + tmp = buf + idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, tmp); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + cmd_sent = 1; + } + + /* If not the last command... */ + if (idx != 0) + msg->flags &= ~SAA_CMDFLAG_CONTINUE; + + msg->size = size - idx * bus->m_wMaxReqSize; + + ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); + + if (cmd_sent) { + ret = SAA_ERR_BUSY; + goto out; + } + ret = SAA_ERR_OVERFLOW; + goto out; + } + ret = SAA_OK; + +out: + mutex_unlock(&dev->cmds[msg->id].lock); + return ret; +} + +/* Wait for a signal event, without holding a mutex. Either return TIMEOUT if + * the event never occured, or SAA_OK if it was signaled during the wait. + */ +int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) +{ + wait_queue_head_t *q = 0; + int ret = SAA_BUS_TIMEOUT; + unsigned long stamp; + int r; + + if (debug >= 4) + saa7164_bus_dump(dev); + + dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno); + + mutex_lock(&dev->lock); + if ((dev->cmds[seqno].inuse == 1) && + (dev->cmds[seqno].seqno == seqno)) { + q = &dev->cmds[seqno].wait; + } + mutex_unlock(&dev->lock); + + if (q) { + /* If we haven't been signalled we need to wait */ + if (dev->cmds[seqno].signalled == 0) { + stamp = jiffies; + dprintk(DBGLVL_CMD, + "%s(seqno=%d) Waiting (signalled=%d)\n", + __func__, seqno, dev->cmds[seqno].signalled); + + /* Wait for signalled to be flagged or timeout */ + wait_event_timeout(*q, dev->cmds[seqno].signalled, HZ); + r = time_before(jiffies, stamp + HZ); + if (r) + ret = SAA_OK; + else + saa7164_cmd_timeout_seqno(dev, seqno); + + dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d " + "(signalled=%d)\n", __func__, seqno, r, + dev->cmds[seqno].signalled); + } else + ret = SAA_OK; + } else + printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", + __func__, seqno); + + return ret; +} + +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno) +{ + int i; + dprintk(DBGLVL_CMD, "%s()\n", __func__); + + mutex_lock(&dev->lock); + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if (dev->cmds[i].inuse == 1) { + dprintk(DBGLVL_CMD, + "seqno %d inuse, sig = %d, t/out = %d\n", + dev->cmds[i].seqno, + dev->cmds[i].signalled, + dev->cmds[i].timeout); + } + } + + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + if ((dev->cmds[i].inuse == 1) && ((i == 0) || + (dev->cmds[i].signalled) || (dev->cmds[i].timeout))) { + dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n", + __func__, i); + dev->cmds[i].signalled = 1; + wake_up(&dev->cmds[i].wait); + } + } + mutex_unlock(&dev->lock); +} + +int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, + u16 controlselector, u16 size, void *buf) +{ + tmComResInfo_t command_t, *pcommand_t; + tmComResInfo_t response_t, *presponse_t; + u8 errdata[256]; + u16 resp_dsize; + u16 data_recd; + u32 loop; + int ret; + int safety = 0; + + dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, " + "sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id, + command, controlselector); + + if ((size == 0) || (buf == 0)) { + printk(KERN_ERR "%s() Invalid param\n", __func__); + return SAA_ERR_BAD_PARAMETER; + } + + /* Prepare some basic command/response structures */ + memset(&command_t, 0, sizeof(command_t)); + memset(&response_t, 0, sizeof(&response_t)); + pcommand_t = &command_t; + presponse_t = &response_t; + command_t.id = id; + command_t.command = command; + command_t.controlselector = controlselector; + command_t.size = size; + + /* Allocate a unique sequence number */ + ret = saa7164_cmd_alloc_seqno(dev); + if (ret < 0) { + printk(KERN_ERR "%s() No free sequences\n", __func__); + ret = SAA_ERR_NO_RESOURCES; + goto out; + } + + command_t.seqno = (u8)ret; + + /* Send Command */ + resp_dsize = size; + pcommand_t->size = size; + + dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n", + __func__, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n", + __func__, pcommand_t->size); + + ret = saa7164_cmd_set(dev, pcommand_t, buf); + if (ret != SAA_OK) { + printk(KERN_ERR "%s() set command failed %d\n", __func__, ret); + + if (ret != SAA_ERR_BUSY) + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + else + /* Flag a timeout, because at least one + * command was sent */ + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + + goto out; + } + + /* With split responses we have to collect the msgs piece by piece */ + data_recd = 0; + loop = 1; + while (loop) { + dprintk(DBGLVL_CMD, "%s() loop\n", __func__); + + ret = saa7164_cmd_wait(dev, pcommand_t->seqno); + dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret); + + /* if power is down and this is not a power command ... */ + + if (ret == SAA_BUS_TIMEOUT) { + printk(KERN_ERR "Event timed out\n"); + saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); + return ret; + } + + if (ret != SAA_OK) { + printk(KERN_ERR "spurious error\n"); + return ret; + } + + /* Peek response */ + ret = saa7164_bus_get(dev, presponse_t, NULL, 1); + if (ret == SAA_ERR_EMPTY) { + dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__); + continue; + } + if (ret != SAA_OK) { + printk(KERN_ERR "peek failed\n"); + return ret; + } + + dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n", + __func__, presponse_t->seqno); + + dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n", + __func__, presponse_t->flags); + + dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n", + __func__, presponse_t->size); + + /* Check if the response was for our command */ + if (presponse_t->seqno != pcommand_t->seqno) { + + dprintk(DBGLVL_CMD, + "wrong event: seqno = %d, " + "expected seqno = %d, " + "will dequeue regardless\n", + presponse_t->seqno, pcommand_t->seqno); + + ret = saa7164_cmd_dequeue(dev); + if (ret != SAA_OK) { + printk(KERN_ERR "dequeue failed, ret = %d\n", + ret); + if (safety++ > 16) { + printk(KERN_ERR + "dequeue exceeded, safety exit\n"); + return SAA_ERR_BUSY; + } + } + + continue; + } + + if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) { + + memset(&errdata[0], 0, sizeof(errdata)); + + ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get error(2)\n"); + return ret; + } + + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n", + __func__, errdata[0], errdata[1], errdata[2], + errdata[3]); + + /* Map error codes */ + dprintk(DBGLVL_CMD, "%s() cmd, error code = 0x%x\n", + __func__, errdata[0]); + + switch (errdata[0]) { + case PVC_ERRORCODE_INVALID_COMMAND: + dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n", + __func__); + ret = SAA_ERR_INVALID_COMMAND; + break; + case PVC_ERRORCODE_INVALID_DATA: + dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n", + __func__); + ret = SAA_ERR_BAD_PARAMETER; + break; + case PVC_ERRORCODE_TIMEOUT: + dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__); + ret = SAA_ERR_TIMEOUT; + break; + case PVC_ERRORCODE_NAK: + dprintk(DBGLVL_CMD, "%s() NAK\n", __func__); + ret = SAA_ERR_NULL_PACKET; + break; + case PVC_ERRORCODE_UNKNOWN: + case PVC_ERRORCODE_INVALID_CONTROL: + dprintk(DBGLVL_CMD, + "%s() UNKNOWN OR INVALID CONTROL\n", + __func__); + default: + dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__); + ret = SAA_ERR_NOT_SUPPORTED; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(2) failed\n"); + + return ret; + } + + /* If response is invalid */ + if ((presponse_t->id != pcommand_t->id) || + (presponse_t->command != pcommand_t->command) || + (presponse_t->controlselector != + pcommand_t->controlselector) || + (((resp_dsize - data_recd) != presponse_t->size) && + !(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) || + ((resp_dsize - data_recd) < presponse_t->size)) { + + /* Invalid */ + dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__); + ret = saa7164_bus_get(dev, presponse_t, 0, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + continue; + } + + /* OK, now we're actually getting out correct response */ + ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0); + if (ret != SAA_OK) { + printk(KERN_ERR "get failed\n"); + return ret; + } + + data_recd = presponse_t->size + data_recd; + if (resp_dsize == data_recd) { + dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__); + break; + } + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(3) failed\n"); + + continue; + + } /* (loop) */ + + /* Release the sequence number allocation */ + saa7164_cmd_free_seqno(dev, pcommand_t->seqno); + + /* if powerdown signal all pending commands */ + + dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__); + + /* See of other commands are on the bus */ + if (saa7164_cmd_dequeue(dev) != SAA_OK) + printk(KERN_ERR "dequeue(4) failed\n"); + + ret = SAA_OK; +out: + return ret; +} + diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c new file mode 100644 index 00000000000..04957090f83 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-core.c @@ -0,0 +1,746 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7164.h" + +MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); + +/* + 1 Basic + 2 + 4 i2c + 8 api + 16 cmd + 32 bus + */ + +unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static unsigned int card[] = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +static unsigned int saa7164_devcount; + +static DEFINE_MUTEX(devlist); +LIST_HEAD(saa7164_devlist); + +#define INT_SIZE 16 + +static void saa7164_work_cmdhandler(struct work_struct *w) +{ + struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd); + + /* Wake up any complete commands */ + saa7164_cmd_signal(dev, 0); +} + +static void saa7164_buffer_deliver(struct saa7164_buffer *buf) +{ + struct saa7164_tsport *port = buf->port; + + /* Feed the transport payload into the kernel demux */ + dvb_dmx_swfilter_packets(&port->dvb.demux, buf->cpu, + SAA7164_TS_NUMBER_OF_LINES); + +} + +static irqreturn_t saa7164_irq_ts(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int wp, i = 0, rp; + + /* Find the current write point from the hardware */ + wp = saa7164_readl(port->bufcounter); + if (wp > (port->hwcfg.buffercount - 1)) + BUG(); + + /* Find the previous buffer to the current write point */ + if (wp == 0) + rp = 7; + else + rp = wp - 1; + + /* Lookup the WP in the buffer list */ + /* TODO: turn this into a worker thread */ + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + if (i++ > port->hwcfg.buffercount) + BUG(); + + if (buf->nr == rp) { + /* Found the buffer, deal with it */ + dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n", + __func__, wp, rp); + saa7164_buffer_deliver(buf); + break; + } + + } + return 0; +} + +/* Primary IRQ handler and dispatch mechanism */ +static irqreturn_t saa7164_irq(int irq, void *dev_id) +{ + struct saa7164_dev *dev = dev_id; + u32 hwacc = 0, interruptid; + u32 intstat[INT_SIZE/4]; + int i, handled = 0, bit; + + /* Check that the hardware is accessable. If the status bytes are + * 0xFF then the device is not accessable, the the IRQ belongs + * to another driver. + */ + for (i = 0; i < INT_SIZE/4; i++) { + + /* TODO: Convert into saa7164_readl() */ + /* Read the 4 hardware interrupt registers */ + intstat[i] = *(dev->InterruptStatus + i); + + if (intstat[i] != 0xffffffff) + hwacc = 1; + } + if (hwacc == 0) { + handled = 0; + goto out; + } + + handled = 1; + + /* For each of the HW interrupt registers */ + for (i = 0; i < INT_SIZE/4; i++) { + + if (intstat[i]) { + /* Each function of the board has it's own interruptid. + * Find the function that triggered then call + * it's handler. + */ + for (bit = 0; bit < 32; bit++) { + + if (((intstat[i] >> bit) & 0x00000001) == 0) + continue; + + /* Calculate the interrupt id (0x00 to 0x7f) */ + + interruptid = (i * 32) + bit; + if (interruptid == dev->intfdesc.bInterruptId) { + /* A response to an cmd/api call */ + schedule_work(&dev->workcmd); + } else if (interruptid == + dev->ts1.hwcfg.interruptid) { + + /* Transport path 1 */ + saa7164_irq_ts(&dev->ts1); + + } else if (interruptid == + dev->ts2.hwcfg.interruptid) { + + /* Transport path 2 */ + saa7164_irq_ts(&dev->ts2); + + } else { + /* Find the function */ + dprintk(DBGLVL_IRQ, + "%s() unhandled interrupt " + "reg 0x%x bit 0x%x " + "intid = 0x%x\n", + __func__, i, bit, interruptid); + } + } + + /* TODO: Convert into saa7164_writel() */ + /* Ack it */ + *(dev->InterruptAck + i) = intstat[i]; + + } + } +out: + return IRQ_RETVAL(handled); +} + +void saa7164_getfirmwarestatus(struct saa7164_dev *dev) +{ + struct saa7164_fw_status *s = &dev->fw_status; + + dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS); + dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE); + dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC); + dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST); + dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD); + dev->fw_status.remainheap = + saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP); + + dprintk(1, "Firmware status:\n"); + dprintk(1, " .status = 0x%08x\n", s->status); + dprintk(1, " .mode = 0x%08x\n", s->mode); + dprintk(1, " .spec = 0x%08x\n", s->spec); + dprintk(1, " .inst = 0x%08x\n", s->inst); + dprintk(1, " .cpuload = 0x%08x\n", s->cpuload); + dprintk(1, " .remainheap = 0x%08x\n", s->remainheap); +} + +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev) +{ + u32 reg; + + reg = saa7164_readl(SAA_DEVICE_VERSION); + dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n", + (reg & 0x0000fc00) >> 10, + (reg & 0x000003e0) >> 5, + (reg & 0x0000001f), + (reg & 0xffff0000) >> 16, + reg); + + return reg; +} + +/* TODO: Debugging func, remove */ +void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len) +{ + int i; + + printk(KERN_INFO "--------------------> " + "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + + for (i = 0; i < len; i += 16) + printk(KERN_INFO " [0x%08x] " + "%02x %02x %02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x %02x %02x\n", i, + *(buf+i+0), *(buf+i+1), *(buf+i+2), *(buf+i+3), + *(buf+i+4), *(buf+i+5), *(buf+i+6), *(buf+i+7), + *(buf+i+8), *(buf+i+9), *(buf+i+10), *(buf+i+11), + *(buf+i+12), *(buf+i+13), *(buf+i+14), *(buf+i+15)); +} + +/* TODO: Debugging func, remove */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr) +{ + int i; + + dprintk(1, "--------------------> " + "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n"); + + for (i = 0; i < 0x100; i += 16) + dprintk(1, "region0[0x%08x] = " + "%02x %02x %02x %02x %02x %02x %02x %02x" + " %02x %02x %02x %02x %02x %02x %02x %02x\n", i, + (u8)saa7164_readb(addr + i + 0), + (u8)saa7164_readb(addr + i + 1), + (u8)saa7164_readb(addr + i + 2), + (u8)saa7164_readb(addr + i + 3), + (u8)saa7164_readb(addr + i + 4), + (u8)saa7164_readb(addr + i + 5), + (u8)saa7164_readb(addr + i + 6), + (u8)saa7164_readb(addr + i + 7), + (u8)saa7164_readb(addr + i + 8), + (u8)saa7164_readb(addr + i + 9), + (u8)saa7164_readb(addr + i + 10), + (u8)saa7164_readb(addr + i + 11), + (u8)saa7164_readb(addr + i + 12), + (u8)saa7164_readb(addr + i + 13), + (u8)saa7164_readb(addr + i + 14), + (u8)saa7164_readb(addr + i + 15) + ); +} + +static void saa7164_dump_hwdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p hwdesc sizeof(tmComResHWDescr_t) = %lu bytes\n", + &dev->hwdesc, sizeof(tmComResHWDescr_t)); + + dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->hwdesc.bDescriptorSubtype); + + dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion); + dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency); + dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes); + dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities); + dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n", + dev->hwdesc.dwDeviceRegistersLocation); + + dprintk(1, " .dwHostMemoryRegion = 0x%x\n", + dev->hwdesc.dwHostMemoryRegion); + + dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n", + dev->hwdesc.dwHostMemoryRegionSize); + + dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegion); + + dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n", + dev->hwdesc.dwHostHibernatMemRegionSize); +} + +static void saa7164_dump_intfdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p intfdesc " + "sizeof(tmComResInterfaceDescr_t) = %lu bytes\n", + &dev->intfdesc, sizeof(tmComResInterfaceDescr_t)); + + dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength); + dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType); + dprintk(1, " .bDescriptorSubtype = 0x%x\n", + dev->intfdesc.bDescriptorSubtype); + + dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags); + dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType); + dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId); + dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface); + dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId); + dprintk(1, " .bDebugInterruptId = 0x%x\n", + dev->intfdesc.bDebugInterruptId); + + dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation); +} + +static void saa7164_dump_busdesc(struct saa7164_dev *dev) +{ + dprintk(1, "@0x%p busdesc sizeof(tmComResBusDescr_t) = %lu bytes\n", + &dev->busdesc, sizeof(tmComResBusDescr_t)); + + dprintk(1, " .CommandRing = 0x%016Lx\n", dev->busdesc.CommandRing); + dprintk(1, " .ResponseRing = 0x%016Lx\n", dev->busdesc.ResponseRing); + dprintk(1, " .CommandWrite = 0x%x\n", dev->busdesc.CommandWrite); + dprintk(1, " .CommandRead = 0x%x\n", dev->busdesc.CommandRead); + dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite); + dprintk(1, " .ResponseRead = 0x%x\n", dev->busdesc.ResponseRead); +} + +/* Much of the hardware configuration and PCI registers are configured + * dynamically depending on firmware. We have to cache some initial + * structures then use these to locate other important structures + * from PCI space. + */ +static void saa7164_get_descriptors(struct saa7164_dev *dev) +{ + memcpy(&dev->hwdesc, dev->bmmio, sizeof(tmComResHWDescr_t)); + memcpy(&dev->intfdesc, dev->bmmio + sizeof(tmComResHWDescr_t), + sizeof(tmComResInterfaceDescr_t)); + memcpy(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation, + sizeof(tmComResBusDescr_t)); + + if (dev->hwdesc.bLength != sizeof(tmComResHWDescr_t)) { + printk(KERN_ERR "Structure tmComResHWDescr_t is mangled\n"); + printk(KERN_ERR "Need %x got %lu\n", dev->hwdesc.bLength, + sizeof(tmComResHWDescr_t)); + } else + saa7164_dump_hwdesc(dev); + + if (dev->intfdesc.bLength != sizeof(tmComResInterfaceDescr_t)) { + printk(KERN_ERR "struct tmComResInterfaceDescr_t is mangled\n"); + printk(KERN_ERR "Need %x got %lu\n", dev->intfdesc.bLength, + sizeof(tmComResInterfaceDescr_t)); + } else + saa7164_dump_intfdesc(dev); + + saa7164_dump_busdesc(dev); +} + +static int saa7164_pci_quirks(struct saa7164_dev *dev) +{ + return 0; +} + +static int get_resources(struct saa7164_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) { + + if (request_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2), dev->name)) + return 0; + } + + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n", + dev->name, + (u64)pci_resource_start(dev->pci, 0), + (u64)pci_resource_start(dev->pci, 2)); + + return -EBUSY; +} + +static int saa7164_dev_setup(struct saa7164_dev *dev) +{ + int i; + + mutex_init(&dev->lock); + atomic_inc(&dev->refcount); + dev->nr = saa7164_devcount++; + + sprintf(dev->name, "saa7164[%d]", dev->nr); + + mutex_lock(&devlist); + list_add_tail(&dev->devlist, &saa7164_devlist); + mutex_unlock(&devlist); + + /* board config */ + dev->board = UNSET; + if (card[dev->nr] < saa7164_bcount) + dev->board = card[dev->nr]; + + for (i = 0; UNSET == dev->board && i < saa7164_idcount; i++) + if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor && + dev->pci->subsystem_device == + saa7164_subids[i].subdevice) + dev->board = saa7164_subids[i].card; + + if (UNSET == dev->board) { + dev->board = SAA7164_BOARD_UNKNOWN; + saa7164_card_list(dev); + } + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + + /* I2C Defaults / setup */ + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[1].dev = dev; + dev->i2c_bus[1].nr = 1; + dev->i2c_bus[2].dev = dev; + dev->i2c_bus[2].nr = 2; + + /* Transport port A Defaults / setup */ + dev->ts1.dev = dev; + dev->ts1.nr = 0; + mutex_init(&dev->ts1.dvb.lock); + INIT_LIST_HEAD(&dev->ts1.dmaqueue.list); + INIT_LIST_HEAD(&dev->ts1.dummy_dmaqueue.list); + mutex_init(&dev->ts1.dmaqueue_lock); + mutex_init(&dev->ts1.dummy_dmaqueue_lock); + + /* Transport port B Defaults / setup */ + dev->ts2.dev = dev; + dev->ts2.nr = 1; + mutex_init(&dev->ts2.dvb.lock); + INIT_LIST_HEAD(&dev->ts2.dmaqueue.list); + INIT_LIST_HEAD(&dev->ts2.dummy_dmaqueue.list); + mutex_init(&dev->ts2.dmaqueue_lock); + mutex_init(&dev->ts2.dummy_dmaqueue_lock); + + if (get_resources(dev) < 0) { + printk(KERN_ERR "CORE %s No more PCIe resources for " + "subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + saa7164_devcount--; + return -ENODEV; + } + + /* PCI/e allocations */ + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + printk(KERN_INFO "CORE %s: dev->lmmio = 0x%p\n", dev->name, + dev->lmmio); + + printk(KERN_INFO "CORE %s: dev->lmmio2 = 0x%p\n", dev->name, + dev->lmmio2); + + dev->bmmio = (u8 __iomem *)dev->lmmio; + dev->bmmio2 = (u8 __iomem *)dev->lmmio2; + printk(KERN_INFO "CORE %s: dev->bmmio = 0x%p\n", dev->name, + dev->bmmio); + + printk(KERN_INFO "CORE %s: dev->bmmio2 = 0x%p\n", dev->name, + dev->bmmio2); + + /* TODO: Magic defines used in the windows driver, define these */ + dev->InterruptStatus = (u32 *)(dev->bmmio + 0x183000 + 0xf80); + dev->InterruptAck = (u32 *)(dev->bmmio + 0x183000 + 0xf90); + + printk(KERN_INFO + "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, saa7164_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + saa7164_pci_quirks(dev); + + return 0; +} + +static void saa7164_dev_unregister(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + release_mem_region(pci_resource_start(dev->pci, 2), + pci_resource_len(dev->pci, 2)); + + if (!atomic_dec_and_test(&dev->refcount)) + return; + + iounmap(dev->lmmio); + iounmap(dev->lmmio2); + + return; +} + +static int __devinit saa7164_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct saa7164_dev *dev; + int err, i; + u32 version; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_free; + } + + if (saa7164_dev_setup(dev) < 0) { + err = -EINVAL; + goto fail_free; + } + + /* print pci info */ + pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); + + pci_set_master(pci_dev); + /* TODO */ + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, saa7164_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name, + pci_dev->irq); + err = -EIO; + goto fail_irq; + } + + pci_set_drvdata(pci_dev, dev); + + saa7164_pci_quirks(dev); + + /* Init the internal command list */ + for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { + dev->cmds[i].seqno = i; + dev->cmds[i].inuse = 0; + mutex_init(&dev->cmds[i].lock); + init_waitqueue_head(&dev->cmds[i].wait); + } + + /* We need a deferred interrupt handler for cmd handling */ + INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler); + + /* Only load the firmware if we know the board */ + if (dev->board != SAA7164_BOARD_UNKNOWN) { + + err = saa7164_downloadfirmware(dev); + if (err < 0) { + printk(KERN_ERR + "Failed to boot firmware, cannot continue\n"); + goto fail_irq; + } + + saa7164_get_descriptors(dev); + saa7164_dumpregs(dev, 0); + saa7164_getcurrentfirmwareversion(dev); + saa7164_getfirmwarestatus(dev); + err = saa7164_bus_setup(dev); + if (err < 0) + printk(KERN_ERR + "Failed to setup the bus, will continue\n"); + saa7164_bus_dump(dev); + + /* Ping the running firmware via the command bus and get the + * firmware version, this checks the bus is running OK. + */ + version = 0; + if (saa7164_api_get_fw_version(dev, &version) == SAA_OK) + dprintk(1, "Bus is operating correctly using " + "version %d.%d.%d.%d (0x%x)\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16, + version); + else + printk(KERN_ERR + "Failed to communicate with the firmware\n"); + + /* Bring up the I2C buses */ + saa7164_i2c_register(&dev->i2c_bus[0]); + saa7164_i2c_register(&dev->i2c_bus[1]); + saa7164_i2c_register(&dev->i2c_bus[2]); + saa7164_gpio_setup(dev); + saa7164_card_setup(dev); + + + /* Parse the dynamic device configuration, find various + * media endpoints (MPEG, WMV, PS, TS) and cache their + * configuration details into the driver, so we can + * reference them later during simething_register() func, + * interrupt handlers, deferred work handlers etc. + */ + saa7164_api_enum_subdevs(dev); + + /* Try a few API commands - just for exercise purposes */ + saa7164_api_test(dev); + + /* Begin to create the video sub-systems and register funcs */ + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ts1) < 0) { + printk(KERN_ERR "%s() Failed to register " + "dvb adapters on porta\n", + __func__); + } + } + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) { + if (saa7164_dvb_register(&dev->ts2) < 0) { + printk(KERN_ERR"%s() Failed to register " + "dvb adapters on portb\n", + __func__); + } + } + + } /* != BOARD_UNKNOWN */ + else + printk(KERN_ERR "%s() Unsupported board detected, " + "registering without firmware\n", __func__); + + return 0; + +fail_irq: + saa7164_dev_unregister(dev); +fail_free: + kfree(dev); + return err; +} + +static void saa7164_shutdown(struct saa7164_dev *dev) +{ + dprintk(1, "%s()\n", __func__); +} + +static void __devexit saa7164_finidev(struct pci_dev *pci_dev) +{ + struct saa7164_dev *dev = pci_get_drvdata(pci_dev); + + saa7164_shutdown(dev); + + if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ts1); + + if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) + saa7164_dvb_unregister(&dev->ts2); + + saa7164_i2c_unregister(&dev->i2c_bus[0]); + saa7164_i2c_unregister(&dev->i2c_bus[1]); + saa7164_i2c_unregister(&dev->i2c_bus[2]); + + pci_disable_device(pci_dev); + + /* unregister stuff */ + free_irq(pci_dev->irq, dev); + pci_set_drvdata(pci_dev, NULL); + + mutex_lock(&devlist); + list_del(&dev->devlist); + mutex_unlock(&devlist); + + saa7164_dev_unregister(dev); + kfree(dev); +} + +static struct pci_device_id saa7164_pci_tbl[] = { + { + /* SAA7164 */ + .vendor = 0x1131, + .device = 0x7164, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl); + +static struct pci_driver saa7164_pci_driver = { + .name = "saa7164", + .id_table = saa7164_pci_tbl, + .probe = saa7164_initdev, + .remove = __devexit_p(saa7164_finidev), + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int saa7164_init(void) +{ + printk(KERN_INFO "saa7164 driver loaded\n"); + return pci_register_driver(&saa7164_pci_driver); +} + +static void saa7164_fini(void) +{ + pci_unregister_driver(&saa7164_pci_driver); +} + +module_init(saa7164_init); +module_exit(saa7164_fini); + diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c new file mode 100644 index 00000000000..f21520f5979 --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-dvb.c @@ -0,0 +1,578 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "saa7164.h" + +#include "tda10048.h" +#include "tda18271.h" +#include "s5h1411.h" + +#define DRIVER_NAME "saa7164" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* addr is in the card struct, get it from there */ +static struct tda10048_config hauppauge_hvr2200_1_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; +static struct tda10048_config hauppauge_hvr2200_2_config = { + .demod_address = 0x12 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_config hauppauge_hvr22x0_tuner_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, +}; + +static struct s5h1411_config hauppauge_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_4000, + .vsb_if = S5H1411_IF_3250, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static int saa7164_dvb_stop_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Stopped\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_acquire_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + ret = 0; + } + + return ret; +} + +static int saa7164_dvb_pause_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", + __func__, ret); + ret = -EIO; + } else { + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + ret = 0; + } + + return ret; +} + +/* Firmware is very windows centric, meaning you have to transition + * the part through AVStream / KS Windows stages, forwards or backwards. + * States are: stopped, acquired (h/w), paused, started. + */ +static int saa7164_dvb_stop_streaming(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + ret = saa7164_dvb_pause_tsport(port); + ret = saa7164_dvb_acquire_tsport(port); + ret = saa7164_dvb_stop_tsport(port); + + return ret; +} + +static int saa7164_dvb_cfg_tsport(struct saa7164_tsport *port) +{ + tmHWStreamParameters_t *params = &port->hw_streamingparams; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + struct list_head *c, *n; + int i = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + saa7164_writel(port->pitch, params->pitch); + saa7164_writel(port->bufsize, params->pitch * params->numberoflines); + + dprintk(DBGLVL_DVB, " configured:\n"); + dprintk(DBGLVL_DVB, " lmmio 0x%llx\n", (u64)dev->lmmio); + dprintk(DBGLVL_DVB, " bufcounter 0x%x = 0x%x\n", port->bufcounter, + saa7164_readl(port->bufcounter)); + + dprintk(DBGLVL_DVB, " pitch 0x%x = %d\n", port->pitch, + saa7164_readl(port->pitch)); + + dprintk(DBGLVL_DVB, " bufsize 0x%x = %d\n", port->bufsize, + saa7164_readl(port->bufsize)); + + dprintk(DBGLVL_DVB, " buffercount = %d\n", port->hwcfg.buffercount); + dprintk(DBGLVL_DVB, " bufoffset = 0x%x\n", port->bufoffset); + dprintk(DBGLVL_DVB, " bufptr32h = 0x%x\n", port->bufptr32h); + dprintk(DBGLVL_DVB, " bufptr32l = 0x%x\n", port->bufptr32l); + + /* Poke the buffers and offsets into PCI space */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + buf = list_entry(c, struct saa7164_buffer, list); + + /* TODO: Review this in light of 32v64 assignments */ + saa7164_writel(port->bufoffset + (sizeof(u32) * i), 0); + saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), + buf->pt_dma); + saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0); + + dprintk(DBGLVL_DVB, + " buf[%d] offset 0x%lx (0x%x) " + "buf 0x%lx/%lx (0x%x/%x)\n", + i, + port->bufoffset + (i * sizeof(u32)), + saa7164_readl(port->bufoffset + (sizeof(u32) * i)), + port->bufptr32h + ((sizeof(u32) * 2) * i), + port->bufptr32l + ((sizeof(u32) * 2) * i), + saa7164_readl(port->bufptr32h + ((sizeof(u32) * i) + * 2)), + saa7164_readl(port->bufptr32l + ((sizeof(u32) * i) + * 2))); + + if (i++ > port->hwcfg.buffercount) + BUG(); + + } + mutex_unlock(&port->dmaqueue_lock); + + return 0; +} + +static int saa7164_dvb_start_tsport(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + int ret = 0, result; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + saa7164_dvb_cfg_tsport(port); + + /* Acquire the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() acquire/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Acquired\n", __func__); + + /* Pause the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() pause/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + goto out; + } else + dprintk(DBGLVL_DVB, "%s() Paused\n", __func__); + + /* Start the hardware */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", + __func__, result); + + /* Stop the hardware, regardless */ + result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); + if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { + printk(KERN_ERR "%s() run/forced stop transition " + "failed, res = 0x%x\n", __func__, result); + } + + ret = -EIO; + } else + dprintk(DBGLVL_DVB, "%s() Running\n", __func__); + +out: + return ret; +} + +static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (!demux->dmx.frontend) + return -EINVAL; + + if (dvb) { + mutex_lock(&dvb->lock); + if (dvb->feeding++ == 0) { + /* Start transport */ + ret = saa7164_dvb_start_tsport(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct saa7164_tsport *port = (struct saa7164_tsport *) demux->priv; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + int ret = 0; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + if (dvb) { + mutex_lock(&dvb->lock); + if (--dvb->feeding == 0) { + /* Stop transport */ + ret = saa7164_dvb_stop_streaming(port); + } + mutex_unlock(&dvb->lock); + dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n", + __func__, port->nr, dvb->feeding); + } + + return ret; +} + +static int dvb_register(struct saa7164_tsport *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *buf; + int result, i; + + dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr); + + /* Sanity check that the PCI configuration space is active */ + if (port->hwcfg.BARLocation == 0) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), NO PCI configuration\n", + DRIVER_NAME, result); + goto fail_adapter; + } + + /* Init and establish defaults */ + port->hw_streamingparams.bitspersample = 8; + port->hw_streamingparams.samplesperline = 188; + port->hw_streamingparams.numberoflines = + (SAA7164_TS_NUMBER_OF_LINES * 188) / 188; + + port->hw_streamingparams.pitch = 188; + port->hw_streamingparams.linethreshold = 0; + port->hw_streamingparams.pagetablelistvirt = 0; + port->hw_streamingparams.pagetablelistphys = 0; + port->hw_streamingparams.numpagetables = 2 + + ((SAA7164_TS_NUMBER_OF_LINES * 188) / PAGE_SIZE); + + port->hw_streamingparams.numpagetableentries = port->hwcfg.buffercount; + + /* Allocate the PCI resources */ + for (i = 0; i < port->hwcfg.buffercount; i++) { + buf = saa7164_buffer_alloc(port, + port->hw_streamingparams.numberoflines * + port->hw_streamingparams.pitch); + + if (!buf) { + result = -ENOMEM; + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d), unable to allocate buffers\n", + DRIVER_NAME, result); + goto fail_adapter; + } + buf->nr = i; + + mutex_lock(&port->dmaqueue_lock); + list_add_tail(&buf->list, &port->dmaqueue.list); + mutex_unlock(&port->dmaqueue_lock); + } + + /* register adapter */ + result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE, + &dev->pci->dev, adapter_nr); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_adapter failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_adapter; + } + dvb->adapter.priv = port; + + /* register frontend */ + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (result < 0) { + printk(KERN_ERR "%s: dvb_register_frontend failed " + "(errno = %d)\n", DRIVER_NAME, result); + goto fail_frontend; + } + + /* register demux stuff */ + dvb->demux.dmx.capabilities = + DMX_TS_FILTERING | DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = port; + dvb->demux.filternum = 256; + dvb->demux.feednum = 256; + dvb->demux.start_feed = saa7164_dvb_start_feed; + dvb->demux.stop_feed = saa7164_dvb_stop_feed; + result = dvb_dmx_init(&dvb->demux); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmx; + } + + dvb->dmxdev.filternum = 256; + dvb->dmxdev.demux = &dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (result < 0) { + printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_dmxdev; + } + + dvb->fe_hw.source = DMX_FRONTEND_0; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_hw; + } + + dvb->fe_mem.source = DMX_MEMORY_FE; + result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); + if (result < 0) { + printk(KERN_ERR "%s: add_frontend failed " + "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result); + goto fail_fe_mem; + } + + result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); + if (result < 0) { + printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n", + DRIVER_NAME, result); + goto fail_fe_conn; + } + + /* register network adapter */ + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + return 0; + +fail_fe_conn: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); +fail_fe_mem: + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); +fail_fe_hw: + dvb_dmxdev_release(&dvb->dmxdev); +fail_dmxdev: + dvb_dmx_release(&dvb->demux); +fail_dmx: + dvb_unregister_frontend(dvb->frontend); +fail_frontend: + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); +fail_adapter: + return result; +} + +int saa7164_dvb_unregister(struct saa7164_tsport *port) +{ + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_dev *dev = port->dev; + struct saa7164_buffer *b; + struct list_head *c, *n; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + /* Remove any allocated buffers */ + mutex_lock(&port->dmaqueue_lock); + list_for_each_safe(c, n, &port->dmaqueue.list) { + b = list_entry(c, struct saa7164_buffer, list); + list_del(c); + saa7164_buffer_dealloc(port, b); + } + mutex_unlock(&port->dmaqueue_lock); + + if (dvb->frontend == NULL) + return 0; + + dvb_net_release(&dvb->net); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); + dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + dvb_unregister_adapter(&dvb->adapter); + return 0; +} + +/* All the DVB attach calls go here, this function get's modified + * for each new card. + */ +int saa7164_dvb_register(struct saa7164_tsport *port) +{ + struct saa7164_dev *dev = port->dev; + struct saa7164_dvb *dvb = &port->dvb; + struct saa7164_i2c *i2c_bus = NULL; + int ret; + + dprintk(DBGLVL_DVB, "%s()\n", __func__); + + /* init frontend */ + switch (dev->board) { + case SAA7164_BOARD_HAUPPAUGE_HVR2200: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + switch (port->nr) { + case 0: + i2c_bus = &dev->i2c_bus[1]; + + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_1_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + case 1: + i2c_bus = &dev->i2c_bus[2]; + + port->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr2200_2_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + } + break; + case SAA7164_BOARD_HAUPPAUGE_HVR2250: + case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: + i2c_bus = &dev->i2c_bus[port->nr + 1]; + + port->dvb.frontend = dvb_attach(s5h1411_attach, + &hauppauge_s5h1411_config, + &i2c_bus->i2c_adap); + + if (port->dvb.frontend != NULL) { + /* TODO: addr is in the card struct */ + dvb_attach(tda18271_attach, port->dvb.frontend, + 0xc0 >> 1, &i2c_bus->i2c_adap, + &hauppauge_hvr22x0_tuner_config); + } + + break; + default: + printk(KERN_ERR "%s: The frontend isn't supported\n", + dev->name); + break; + } + if (NULL == dvb->frontend) { + printk(KERN_ERR "%s() Frontend initialization failed\n", + __func__); + return -1; + } + + /* Put the analog decoder in standby to keep it quiet */ + + /* register everything */ + ret = dvb_register(port); + if (ret < 0) { + if (dvb->frontend->ops.release) + dvb->frontend->ops.release(dvb->frontend); + return ret; + } + + return 0; +} + diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c new file mode 100644 index 00000000000..6595dd67c5c --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-fw.c @@ -0,0 +1,615 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#include "saa7164.h" + +#define SAA7164_REV2_FIRMWARE "v4l-saa7164-1.0.2.fw" +#define SAA7164_REV2_FIRMWARE_SIZE 3978608 + +#define SAA7164_REV3_FIRMWARE "v4l-saa7164-1.0.3.fw" +#define SAA7164_REV3_FIRMWARE_SIZE 3978608 + +struct fw_header { + u32 firmwaresize; + u32 bslsize; + u32 reserved; + u32 version; +}; + +int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while ((saa7164_readl(reg) & 0x01) == 0) { + timeout -= 5; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l ack)\n", + __func__); + return -EBUSY; + } + /* TODO: Review this for efficiency, f/w load is slow */ + msleep(1); + } + + return 0; +} + +int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg) +{ + u32 timeout = SAA_DEVICE_TIMEOUT; + while (saa7164_readl(reg) & 0x01) { + timeout -= 5; + if (timeout == 0) { + printk(KERN_ERR "%s() timeout (no d/l clr)\n", + __func__); + return -EBUSY; + } + /* TODO: Review this for efficiency, f/w load is slow */ + msleep(1); + } + + return 0; +} + +/* TODO: move dlflags into dev-> and change to write/readl/b */ +/* TODO: Excessive levels of debug */ +int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize, + u32 dlflags, u8 *dst, u32 dstsize) +{ + u32 reg, timeout, offset; + u8 *srcbuf = NULL; + int ret; + + u32 dlflag = dlflags; + u32 dlflag_ack = dlflag + 4; + u32 drflag = dlflag_ack + 4; + u32 drflag_ack = drflag + 4; + u32 bleflag = drflag_ack + 4; + + dprintk(DBGLVL_FW, + "%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n", + __func__, src, srcsize, dlflags, dst, dstsize); + + if ((src == 0) || (dst == 0)) { + ret = -EIO; + goto out; + } + + srcbuf = kzalloc(4 * 1048576, GFP_KERNEL); + if (NULL == srcbuf) { + ret = -ENOMEM; + goto out; + } + + if (srcsize > (4*1048576)) { + ret = -ENOMEM; + goto out; + } + + memcpy(srcbuf, src, srcsize); + + dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag); + dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack); + dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag); + dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack); + dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag); + + reg = saa7164_readl(dlflag); + dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg); + if (reg == 1) + dprintk(DBGLVL_FW, + "%s() Download flag already set, please reboot\n", + __func__); + + /* Indicate download start */ + saa7164_writel(dlflag, 1); + ret = saa7164_dl_wait_ack(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Ack download start, then wait for wait */ + saa7164_writel(dlflag, 0); + ret = saa7164_dl_wait_clr(dev, dlflag_ack); + if (ret < 0) + goto out; + + /* Deal with the raw firmware, in the appropriate chunk size */ + for (offset = 0; srcsize > dstsize; + srcsize -= dstsize, offset += dstsize) { + + dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize); + memcpy(dst, srcbuf + offset, dstsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + /* Wait for indication data was received */ + saa7164_writel(drflag, 0); + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + } + + dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize); + /* Write last block to the device */ + memcpy(dst, srcbuf+offset, srcsize); + + /* Flag the data as ready */ + saa7164_writel(drflag, 1); + ret = saa7164_dl_wait_ack(dev, drflag_ack); + if (ret < 0) + goto out; + + saa7164_writel(drflag, 0); + timeout = 0; + while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) { + if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() image corrupt\n", __func__); + ret = -EBUSY; + goto out; + } + + if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + ret = -EBUSY; + goto out; + } + + msleep(10); + if (timeout++ > 60) + break; + } + + printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__); + + ret = saa7164_dl_wait_clr(dev, drflag_ack); + if (ret < 0) + goto out; + + printk(KERN_INFO "%s() Image booted successfully.\n", __func__); + ret = 0; + +out: + kfree(srcbuf); + return ret; +} + +/* TODO: Excessive debug */ +/* Load the firmware. Optionally it can be in ROM or newer versions + * can be on disk, saving the expense of the ROM hardware. */ +int saa7164_downloadfirmware(struct saa7164_dev *dev) +{ + /* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */ + u32 tmp, filesize, version, err_flags, first_timeout, fwlength; + u32 second_timeout, updatebootloader = 1, bootloadersize = 0; + const struct firmware *fw = NULL; + struct fw_header *hdr, *boothdr = NULL, *fwhdr; + u32 bootloaderversion = 0, fwloadersize; + u8 *bootloaderoffset = NULL, *fwloaderoffset; + char *fwname; + int ret; + + dprintk(DBGLVL_FW, "%s()\n", __func__); + + if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) { + fwname = SAA7164_REV2_FIRMWARE; + fwlength = SAA7164_REV2_FIRMWARE_SIZE; + } else { + fwname = SAA7164_REV3_FIRMWARE; + fwlength = SAA7164_REV3_FIRMWARE_SIZE; + } + + version = saa7164_getcurrentfirmwareversion(dev); + + if (version == 0x00) { + + second_timeout = 100; + first_timeout = 100; + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags = %x\n", + __func__, err_flags); + msleep(10); + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no first image\n", + __func__); + break; + } + } else if (err_flags & SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS); + } /* While != Booting */ + + if (err_flags == SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n", + __func__); + first_timeout = SAA_DEVICE_TIMEOUT; + second_timeout = 60 * SAA_DEVICE_TIMEOUT; + second_timeout = 100; + + err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + while (err_flags != SAA_DEVICE_IMAGE_BOOTING) { + dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n", + __func__, err_flags); + msleep(10); + + if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) { + printk(KERN_ERR + "%s() firmware corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) { + printk(KERN_ERR + "%s() device memory corrupt\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_NO_IMAGE) { + printk(KERN_ERR "%s() no first image\n", + __func__); + break; + } + if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() no second image\n", + __func__); + break; + } + } else if (err_flags & + SAA_DEVICE_IMAGE_LOADING) { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() FW load time exceeded\n", + __func__); + break; + } + } else { + second_timeout -= 10; + if (second_timeout == 0) { + printk(KERN_ERR + "%s() Unknown bootloader flags 0x%x\n", + __func__, err_flags); + break; + } + } + + err_flags = + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS); + } /* err_flags != SAA_DEVICE_IMAGE_BOOTING */ + + dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n", + __func__, + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS), + saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS)); + + } /* err_flags == SAA_DEVICE_IMAGE_BOOTING */ + + /* It's possible for both firmwares to have booted, + * but that doesn't mean they've finished booting yet. + */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING)) { + + + dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n", + __func__); + + first_timeout = SAA_DEVICE_TIMEOUT; + while (first_timeout) { + msleep(10); + + version = + saa7164_getcurrentfirmwareversion(dev); + if (version) { + dprintk(DBGLVL_FW, + "%s() All f/w loaded successfully\n", + __func__); + break; + } else { + first_timeout -= 10; + if (first_timeout == 0) { + printk(KERN_ERR + "%s() FW did not boot\n", + __func__); + break; + } + } + } + } + version = saa7164_getcurrentfirmwareversion(dev); + } /* version == 0 */ + + /* Has the firmware really booted? */ + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && + (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) == + SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) { + + printk(KERN_ERR + "%s() The firmware hung, probably bad firmware\n", + __func__); + + /* Tell the second stage loader we have a deadlock */ + saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET, + SAA_DEVICE_DEADLOCK_DETECTED); + + saa7164_getfirmwarestatus(dev); + + return -ENOMEM; + } + + dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n", + (version & 0x0000fc00) >> 10, + (version & 0x000003e0) >> 5, + (version & 0x0000001f), + (version & 0xffff0000) >> 16); + + /* Load the firmwware from the disk if required */ + if (version == 0) { + + printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n", + __func__, fwname); + + ret = request_firmware(&fw, fwname, &dev->pci->dev); + if (ret) { + printk(KERN_ERR "%s() Upload failed. " + "(file not found?)\n", __func__); + return -ENOMEM; + } + + printk(KERN_INFO "%s() firmware read %Zu bytes.\n", + __func__, fw->size); + + if (fw->size != fwlength) { + printk(KERN_ERR "xc5000: firmware incorrect size\n"); + ret = -ENOMEM; + goto out; + } + + printk(KERN_INFO "%s() firmware loaded.\n", __func__); + + hdr = (struct fw_header *)fw->data; + printk(KERN_INFO "Firmware file header part 1:\n"); + printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize); + printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize); + printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved); + printk(KERN_INFO " .Version = 0x%x\n", hdr->version); + + /* Retreive bootloader if reqd */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) + /* Second bootloader in the firmware file */ + filesize = hdr->reserved * 16; + else + filesize = (hdr->firmwaresize + hdr->bslsize) * + 16 + sizeof(struct fw_header); + + printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n", + __func__, filesize); + + /* Get bootloader (if reqd) and firmware header */ + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + /* Second boot loader is required */ + + /* Get the loader header */ + boothdr = (struct fw_header *)(fw->data + + sizeof(struct fw_header)); + + bootloaderversion = + saa7164_readl(SAA_DEVICE_2ND_VERSION); + dprintk(DBGLVL_FW, "Onboard BootLoader:\n"); + dprintk(DBGLVL_FW, "->Flag 0x%x\n", + saa7164_readl(SAA_BOOTLOADERERROR_FLAGS)); + dprintk(DBGLVL_FW, "->Ack 0x%x\n", + saa7164_readl(SAA_DATAREADY_FLAG_ACK)); + dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version); + dprintk(DBGLVL_FW, "->Loader Version 0x%x\n", + bootloaderversion); + + if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) == + 0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK) + == 0x00) && (version == 0x00)) { + + dprintk(DBGLVL_FW, "BootLoader version in " + "rom %d.%d.%d.%d\n", + (bootloaderversion & 0x0000fc00) >> 10, + (bootloaderversion & 0x000003e0) >> 5, + (bootloaderversion & 0x0000001f), + (bootloaderversion & 0xffff0000) >> 16 + ); + dprintk(DBGLVL_FW, "BootLoader version " + "in file %d.%d.%d.%d\n", + (boothdr->version & 0x0000fc00) >> 10, + (boothdr->version & 0x000003e0) >> 5, + (boothdr->version & 0x0000001f), + (boothdr->version & 0xffff0000) >> 16 + ); + + if (bootloaderversion == boothdr->version) + updatebootloader = 0; + } + + /* Calculate offset to firmware header */ + tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 + + (sizeof(struct fw_header) + + sizeof(struct fw_header)); + + fwhdr = (struct fw_header *)(fw->data+tmp); + } else { + /* No second boot loader */ + fwhdr = hdr; + } + + dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n", + (fwhdr->version & 0x0000fc00) >> 10, + (fwhdr->version & 0x000003e0) >> 5, + (fwhdr->version & 0x0000001f), + (fwhdr->version & 0xffff0000) >> 16 + ); + + if (version == fwhdr->version) { + /* No download, firmware already on board */ + ret = 0; + goto out; + } + + if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) { + if (updatebootloader) { + /* Get ready to upload the bootloader */ + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = (u8 *)(fw->data + + sizeof(struct fw_header)); + + dprintk(DBGLVL_FW, "bootloader d/l starts.\n"); + printk(KERN_INFO "%s() FirmwareSize = 0x%x\n", + __func__, boothdr->firmwaresize); + printk(KERN_INFO "%s() BSLSize = 0x%x\n", + __func__, boothdr->bslsize); + printk(KERN_INFO "%s() Reserved = 0x%x\n", + __func__, boothdr->reserved); + printk(KERN_INFO "%s() Version = 0x%x\n", + __func__, boothdr->version); + ret = saa7164_downloadimage( + dev, + bootloaderoffset, + bootloadersize, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR + "bootloader d/l has failed\n"); + goto out; + } + dprintk(DBGLVL_FW, + "bootloader download complete.\n"); + + } + + printk(KERN_ERR "starting firmware download(2)\n"); + bootloadersize = (boothdr->firmwaresize + + boothdr->bslsize) * 16 + + sizeof(struct fw_header); + + bootloaderoffset = + (u8 *)(fw->data + sizeof(struct fw_header)); + + fwloaderoffset = bootloaderoffset + bootloadersize; + + /* TODO: fix this bounds overrun here with old f/ws */ + fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) * + 16 + sizeof(struct fw_header); + + ret = saa7164_downloadimage( + dev, + fwloaderoffset, + fwloadersize, + SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET, + dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET, + SAA_DEVICE_2ND_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + + } else { + + /* No bootloader update reqd, download firmware only */ + printk(KERN_ERR "starting firmware download(3)\n"); + + ret = saa7164_downloadimage( + dev, + (u8 *)fw->data, + fw->size, + SAA_DOWNLOAD_FLAGS, + dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET, + SAA_DEVICE_BUFFERBLOCKSIZE); + if (ret < 0) { + printk(KERN_ERR "firmware download failed\n"); + goto out; + } + printk(KERN_ERR "firmware download complete.\n"); + } + } + + ret = 0; + +out: + if (fw) + release_firmware(fw); + + return ret; +} diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c new file mode 100644 index 00000000000..4c431b4ac8d --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-i2c.c @@ -0,0 +1,170 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "saa7164.h" + +static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct saa7164_i2c *bus = i2c_adap->algo_data; + struct saa7164_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(DBGLVL_I2C, "%s(num = %d)\n", __func__, num); + + for (i = 0 ; i < num; i++) { + dprintk(DBGLVL_I2C, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* Unsupported - Yet*/ + printk(KERN_ERR "%s() Unsupported - Yet\n", __func__); + continue; + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + + retval = saa7164_api_i2c_read(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf, + msgs[i+1].len, msgs[i+1].buf + ); + + i++; + + if (retval < 0) + goto err; + } else { + /* write */ + retval = saa7164_api_i2c_write(bus, msgs[i].addr, + msgs[i].len, msgs[i].buf); + } + if (retval < 0) + goto err; + } + return num; + + err: + return retval; +} + +static int attach_inform(struct i2c_client *client) +{ + struct saa7164_i2c *bus = i2c_get_adapdata(client->adapter); + struct saa7164_dev *dev = bus->dev; + + dprintk(DBGLVL_I2C, "%s i2c attach [addr=0x%x,client=%s]\n", + client->driver->driver.name, client->addr, client->name); + + if (!client->driver->command) + return 0; + + return 0; +} + +static int detach_inform(struct i2c_client *client) +{ + struct saa7164_dev *dev = i2c_get_adapdata(client->adapter); + + dprintk(DBGLVL_I2C, "i2c detach [client=%s]\n", client->name); + + return 0; +} + +void saa7164_call_i2c_clients(struct saa7164_i2c *bus, unsigned int cmd, + void *arg) +{ + if (bus->i2c_rc != 0) + return; + + i2c_clients_command(&bus->i2c_adap, cmd, arg); +} + +static u32 saa7164_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm saa7164_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = saa7164_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter saa7164_i2c_adap_template = { + .name = "saa7164", + .owner = THIS_MODULE, + .id = I2C_HW_B_SAA7164, + .algo = &saa7164_i2c_algo_template, + .client_register = attach_inform, + .client_unregister = detach_inform, +}; + +static struct i2c_client saa7164_i2c_client_template = { + .name = "saa7164 internal", +}; + +int saa7164_i2c_register(struct saa7164_i2c *bus) +{ + struct saa7164_dev *dev = bus->dev; + + dprintk(DBGLVL_I2C, "%s(bus = %d)\n", __func__, bus->nr); + + memcpy(&bus->i2c_adap, &saa7164_i2c_adap_template, + sizeof(bus->i2c_adap)); + + memcpy(&bus->i2c_algo, &saa7164_i2c_algo_template, + sizeof(bus->i2c_algo)); + + memcpy(&bus->i2c_client, &saa7164_i2c_client_template, + sizeof(bus->i2c_client)); + + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, + sizeof(bus->i2c_adap.name)); + + bus->i2c_algo.data = bus; + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, bus); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + if (0 == bus->i2c_rc) { + printk(KERN_ERR "%s: i2c bus %d registered\n", + dev->name, bus->nr); + } else + printk(KERN_ERR "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); + + return bus->i2c_rc; +} + +int saa7164_i2c_unregister(struct saa7164_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} diff --git a/drivers/media/video/saa7164/saa7164-reg.h b/drivers/media/video/saa7164/saa7164-reg.h new file mode 100644 index 00000000000..06be4c13d5b --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-reg.h @@ -0,0 +1,166 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Retest the driver with errors expressed as negatives */ + +/* Result codes */ +#define SAA_OK 0 +#define SAA_ERR_BAD_PARAMETER 0x09 +#define SAA_ERR_NO_RESOURCES 0x0c +#define SAA_ERR_NOT_SUPPORTED 0x13 +#define SAA_ERR_BUSY 0x15 +#define SAA_ERR_READ 0x17 +#define SAA_ERR_TIMEOUT 0x1f +#define SAA_ERR_OVERFLOW 0x20 +#define SAA_ERR_EMPTY 0x22 +#define SAA_ERR_NOT_STARTED 0x23 +#define SAA_ERR_ALREADY_STARTED 0x24 +#define SAA_ERR_NOT_STOPPED 0x25 +#define SAA_ERR_ALREADY_STOPPED 0x26 +#define SAA_ERR_INVALID_COMMAND 0x3e +#define SAA_ERR_NULL_PACKET 0x59 + +/* Errors and flags from the silicon */ +#define PVC_ERRORCODE_UNKNOWN 0x00 +#define PVC_ERRORCODE_INVALID_COMMAND 0x01 +#define PVC_ERRORCODE_INVALID_CONTROL 0x02 +#define PVC_ERRORCODE_INVALID_DATA 0x03 +#define PVC_ERRORCODE_TIMEOUT 0x04 +#define PVC_ERRORCODE_NAK 0x05 +#define PVC_RESPONSEFLAG_ERROR 0x01 +#define PVC_RESPONSEFLAG_OVERFLOW 0x02 +#define PVC_RESPONSEFLAG_RESET 0x04 +#define PVC_RESPONSEFLAG_INTERFACE 0x08 +#define PVC_RESPONSEFLAG_CONTINUED 0x10 +#define PVC_CMDFLAG_INTERRUPT 0x02 +#define PVC_CMDFLAG_INTERFACE 0x04 +#define PVC_CMDFLAG_SERIALIZE 0x08 +#define PVC_CMDFLAG_CONTINUE 0x10 + +/* Silicon Commands */ +#define GET_DESCRIPTORS_CONTROL 0x01 +#define GET_STRING_CONTROL 0x03 +#define GET_LANGUAGE_CONTROL 0x05 +#define SET_POWER_CONTROL 0x07 +#define GET_FW_VERSION_CONTROL 0x09 +#define SET_DEBUG_LEVEL_CONTROL 0x0B +#define GET_DEBUG_DATA_CONTROL 0x0C +#define GET_PRODUCTION_INFO_CONTROL 0x0D + +/* cmd defines */ +#define SAA_CMDFLAG_CONTINUE 0x10 +#define SAA_CMD_MAX_MSG_UNITS 256 + +/* Some defines */ +#define SAA_BUS_TIMEOUT 50 +#define SAA_DEVICE_TIMEOUT 5000 +#define SAA_DEVICE_MAXREQUESTSIZE 256 + +/* Register addresses */ +#define SAA_DEVICE_VERSION 0x30 +#define SAA_DOWNLOAD_FLAGS 0x34 +#define SAA_DOWNLOAD_FLAG 0x34 +#define SAA_DOWNLOAD_FLAG_ACK 0x38 +#define SAA_DATAREADY_FLAG 0x3C +#define SAA_DATAREADY_FLAG_ACK 0x40 + +/* Boot loader register and bit definitions */ +#define SAA_BOOTLOADERERROR_FLAGS 0x44 +#define SAA_DEVICE_IMAGE_SEARCHING 0x01 +#define SAA_DEVICE_IMAGE_LOADING 0x02 +#define SAA_DEVICE_IMAGE_BOOTING 0x03 +#define SAA_DEVICE_IMAGE_CORRUPT 0x04 +#define SAA_DEVICE_MEMORY_CORRUPT 0x08 +#define SAA_DEVICE_NO_IMAGE 0x10 + +/* Register addresses */ +#define SAA_DEVICE_2ND_VERSION 0x50 +#define SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET 0x54 + +/* Register addresses */ +#define SAA_SECONDSTAGEERROR_FLAGS 0x64 + +/* Bootloader regs and flags */ +#define SAA_DEVICE_DEADLOCK_DETECTED_OFFSET 0x6C +#define SAA_DEVICE_DEADLOCK_DETECTED 0xDEADDEAD + +/* Basic firmware status registers */ +#define SAA_DEVICE_SYSINIT_STATUS_OFFSET 0x70 +#define SAA_DEVICE_SYSINIT_STATUS 0x70 +#define SAA_DEVICE_SYSINIT_MODE 0x74 +#define SAA_DEVICE_SYSINIT_SPEC 0x78 +#define SAA_DEVICE_SYSINIT_INST 0x7C +#define SAA_DEVICE_SYSINIT_CPULOAD 0x80 +#define SAA_DEVICE_SYSINIT_REMAINHEAP 0x84 + +#define SAA_DEVICE_DOWNLOAD_OFFSET 0x1000 +#define SAA_DEVICE_BUFFERBLOCKSIZE 0x1000 + +#define SAA_DEVICE_2ND_BUFFERBLOCKSIZE 0x100000 +#define SAA_DEVICE_2ND_DOWNLOAD_OFFSET 0x200000 + +/* Descriptors */ +#define CS_INTERFACE 0x24 + +/* Descriptor subtypes */ +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define FEATURE_UNIT 0x06 +#define TUNER_UNIT 0x09 +#define ENCODER_UNIT 0x0A +#define EXTENSION_UNIT 0x0B +#define VC_TUNER_PATH 0xF0 +#define PVC_HARDWARE_DESCRIPTOR 0xF1 +#define PVC_INTERFACE_DESCRIPTOR 0xF2 +#define PVC_INFRARED_UNIT 0xF3 +#define DRM_UNIT 0xF4 +#define GENERAL_REQUEST 0xF5 + +/* Format Types */ +#define VS_FORMAT_TYPE 0x02 +#define VS_FORMAT_TYPE_I 0x01 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MPEG2PS 0x09 +#define VS_FORMAT_MPEG2TS 0x0A +#define VS_FORMAT_MPEG4SL 0x0B +#define VS_FORMAT_WM9 0x0C +#define VS_FORMAT_DIVX 0x0D +#define VS_FORMAT_VBI 0x0E +#define VS_FORMAT_RDS 0x0F + +/* Device extension commands */ +#define EXU_REGISTER_ACCESS_CONTROL 0x00 +#define EXU_GPIO_CONTROL 0x01 +#define EXU_GPIO_GROUP_CONTROL 0x02 +#define EXU_INTERRUPT_CONTROL 0x03 + +/* State Transition and args */ +#define SAA_STATE_CONTROL 0x03 +#define SAA_DMASTATE_STOP 0x00 +#define SAA_DMASTATE_ACQUIRE 0x01 +#define SAA_DMASTATE_PAUSE 0x02 +#define SAA_DMASTATE_RUN 0x03 + +/* Hardware registers */ + diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h new file mode 100644 index 00000000000..99093f23aae --- /dev/null +++ b/drivers/media/video/saa7164/saa7164-types.h @@ -0,0 +1,287 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* TODO: Cleanup and shorten the namespace */ + +/* Some structues are passed directly to/from the firmware and + * have strict alignment requirements. This is one of them. + */ +typedef struct { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u16 bcdSpecVersion; + u32 dwClockFrequency; + u32 dwClockUpdateRes; + u8 bCapabilities; + u32 dwDeviceRegistersLocation; + u32 dwHostMemoryRegion; + u32 dwHostMemoryRegionSize; + u32 dwHostHibernatMemRegion; + u32 dwHostHibernatMemRegionSize; +} __attribute__((packed)) tmComResHWDescr_t; + +/* This is DWORD aligned on windows but I can't find the right + * gcc syntax to match the binary data from the device. + * I've manually padded with Reserved[3] bytes to match the hardware, + * but this could break if GCC decies to pack in a different way. + */ +typedef struct { + u8 bLength; + u8 bDescriptorType; + u8 bDescriptorSubtype; + u8 bFlags; + u8 bInterfaceType; + u8 bInterfaceId; + u8 bBaseInterface; + u8 bInterruptId; + u8 bDebugInterruptId; + u8 BARLocation; + u8 Reserved[3]; +} tmComResInterfaceDescr_t; + +typedef struct { + u64 CommandRing; + u64 ResponseRing; + u32 CommandWrite; + u32 CommandRead; + u32 ResponseWrite; + u32 ResponseRead; +} tmComResBusDescr_t; + +typedef enum { + NONE = 0, + TYPE_BUS_PCI = 1, + TYPE_BUS_PCIe = 2, + TYPE_BUS_USB = 3, + TYPE_BUS_I2C = 4 +} tmBusType_t; + +typedef struct { + tmBusType_t Type; + u16 m_wMaxReqSize; + u8 *m_pdwSetRing; + u32 m_dwSizeSetRing; + u8 *m_pdwGetRing; + u32 m_dwSizeGetRing; + u32 *m_pdwSetWritePos; + u32 *m_pdwSetReadPos; + u32 *m_pdwGetWritePos; + u32 *m_pdwGetReadPos; + + /* All access is protected */ + struct mutex lock; + +} tmComResBusInfo_t; + +typedef struct { + u8 id; + u8 flags; + u16 size; + u32 command; + u16 controlselector; + u8 seqno; +} __attribute__((packed)) tmComResInfo_t; + +typedef enum { + SET_CUR = 0x01, + GET_CUR = 0x81, + GET_MIN = 0x82, + GET_MAX = 0x83, + GET_RES = 0x84, + GET_LEN = 0x85, + GET_INFO = 0x86, + GET_DEF = 0x87 +} tmComResCmd_t; + +struct cmd { + u8 seqno; + u32 inuse; + u32 timeout; + u32 signalled; + struct mutex lock; + wait_queue_head_t wait; +}; + +typedef struct { + u32 pathid; + u32 size; + void *descriptor; +} tmDescriptor_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; +} __attribute__((packed)) tmComResDescrHeader_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u32 devicetype; + u16 deviceid; + u32 numgpiopins; + u8 numgpiogroups; + u8 controlsize; +} __attribute__((packed)) tmComResExtDevDescrHeader_t; + +typedef struct { + u32 pin; + u8 state; +} __attribute__((packed)) tmComResGPIO_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 pathid; +} __attribute__((packed)) tmComResPathDescrHeader_t; + +/* terminaltype */ +typedef enum { + ITT_ANTENNA = 0x0203, + LINE_CONNECTOR = 0x0603, + SPDIF_CONNECTOR = 0x0605, + COMPOSITE_CONNECTOR = 0x0401, + SVIDEO_CONNECTOR = 0x0402, + COMPONENT_CONNECTOR = 0x0403, + STANDARD_DMA = 0xF101 +} tmComResTermType_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 terminalid; + u16 terminaltype; + u8 assocterminal; + u8 iterminal; + u8 controlsize; +} __attribute__((packed)) tmComResAntTermDescrHeader_t; + +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 unitid; + u8 sourceid; + u8 iunit; + u32 tuningstandards; + u8 controlsize; + u32 controls; +} __attribute__((packed)) tmComResTunerDescrHeader_t; + +typedef enum { + /* the buffer does not contain any valid data */ + TM_BUFFER_FLAG_EMPTY, + + /* the buffer is filled with valid data */ + TM_BUFFER_FLAG_DONE, + + /* the buffer is the dummy buffer - TODO??? */ + TM_BUFFER_FLAG_DUMMY_BUFFER +} tmBufferFlag_t; + +typedef struct { + u64 *pagetablevirt; + u64 pagetablephys; + u16 offset; + u8 *context; + u64 timestamp; + tmBufferFlag_t BufferFlag_t; + u32 lostbuffers; + u32 validbuffers; + u64 *dummypagevirt; + u64 dummypagephys; + u64 *addressvirt; +} tmBuffer_t; + +typedef struct { + u32 bitspersample; + u32 samplesperline; + u32 numberoflines; + u32 pitch; + u32 linethreshold; + u64 **pagetablelistvirt; + u64 *pagetablelistphys; + u32 numpagetables; + u32 numpagetableentries; +} tmHWStreamParameters_t; + +typedef struct { + tmHWStreamParameters_t HWStreamParameters_t; + u64 qwDummyPageTablePhys; + u64 *pDummyPageTableVirt; +} tmStreamParameters_t; + +typedef struct { + u8 len; + u8 type; + u8 subtyle; + u8 unitid; + u16 terminaltype; + u8 assocterminal; + u8 sourceid; + u8 iterminal; + u32 BARLocation; + u8 flags; + u8 interruptid; + u8 buffercount; + u8 metadatasize; + u8 numformats; + u8 controlsize; +} __attribute__((packed)) tmComResDMATermDescrHeader_t; + +/* + * + * Description: + * This is the transport stream format header. + * + * Settings: + * bLength - The size of this descriptor in bytes. + * bDescriptorType - CS_INTERFACE. + * bDescriptorSubtype - VS_FORMAT_MPEG2TS descriptor subtype. + * bFormatIndex - A non-zero constant that uniquely identifies the + * format. + * bDataOffset - Offset to TSP packet within MPEG-2 TS transport + * stride, in bytes. + * bPacketLength - Length of TSP packet, in bytes (typically 188). + * bStrideLength - Length of MPEG-2 TS transport stride. + * guidStrideFormat - A Globally Unique Identifier indicating the + * format of the stride data (if any). Set to zeros + * if there is no Stride Data, or if the Stride + * Data is to be ignored by the application. + * + */ +typedef struct { + u8 len; + u8 type; + u8 subtype; + u8 bFormatIndex; + u8 bDataOffset; + u8 bPacketLength; + u8 bStrideLength; + u8 guidStrideFormat[16]; +} __attribute__((packed)) tmComResTSFormatDescrHeader_t; + diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h new file mode 100644 index 00000000000..ed38118ffde --- /dev/null +++ b/drivers/media/video/saa7164/saa7164.h @@ -0,0 +1,401 @@ +/* + * Driver for the NXP SAA7164 PCIe bridge + * + * Copyright (c) 2009 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + Driver architecture + ******************* + + saa7164_core.c/buffer.c/cards.c/i2c.c/dvb.c + | : Standard Linux driver framework for creating + | : exposing and managing interfaces to the rest + | : of the kernel or userland. Also uses _fw.c to load + | : firmware direct into the PCIe bus, bypassing layers. + V + saa7164_api..() : Translate kernel specific functions/features + | : into command buffers. + V + saa7164_cmd..() : Manages the flow of command packets on/off, + | : the bus. Deal with bus errors, timeouts etc. + V + saa7164_bus..() : Manage a read/write memory ring buffer in the + | : PCIe Address space. + | + | saa7164_fw...() : Load any frimware + | | : direct into the device + V V + <- ----------------- PCIe address space -------------------- -> +*/ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "saa7164-reg.h" +#include "saa7164-types.h" + +#include +#include + +#define SAA7164_MAXBOARDS 8 + +#define UNSET (-1U) +#define SAA7164_BOARD_NOAUTO UNSET +#define SAA7164_BOARD_UNKNOWN 0 +#define SAA7164_BOARD_UNKNOWN_REV2 1 +#define SAA7164_BOARD_UNKNOWN_REV3 2 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250 3 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200 4 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2 5 +#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6 +#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7 + +#define SAA7164_MAX_UNITS 8 +#define SAA7164_TS_NUMBER_OF_LINES 312 +#define SAA7164_PT_ENTRIES 16 /* (312 * 188) / 4096 */ + +#define DBGLVL_FW 4 +#define DBGLVL_DVB 8 +#define DBGLVL_I2C 16 +#define DBGLVL_API 32 +#define DBGLVL_CMD 64 +#define DBGLVL_BUS 128 +#define DBGLVL_IRQ 256 +#define DBGLVL_BUF 512 + +enum port_t { + SAA7164_MPEG_UNDEFINED = 0, + SAA7164_MPEG_DVB, +}; + +enum saa7164_i2c_bus_nr { + SAA7164_I2C_BUS_0 = 0, + SAA7164_I2C_BUS_1, + SAA7164_I2C_BUS_2, +}; + +enum saa7164_buffer_flags { + SAA7164_BUFFER_UNDEFINED = 0, + SAA7164_BUFFER_FREE, + SAA7164_BUFFER_BUSY, + SAA7164_BUFFER_FULL +}; + +enum saa7164_unit_type { + SAA7164_UNIT_UNDEFINED = 0, + SAA7164_UNIT_DIGITAL_DEMODULATOR, + SAA7164_UNIT_ANALOG_DEMODULATOR, + SAA7164_UNIT_TUNER, + SAA7164_UNIT_EEPROM, + SAA7164_UNIT_ZILOG_IRBLASTER, + SAA7164_UNIT_ENCODER, +}; + +/* The PCIe bridge doesn't grant direct access to i2c. + * Instead, you address i2c devices using a uniqely + * allocated 'unitid' value via a messaging API. This + * is a problem. The kernel and existing demod/tuner + * drivers expect to talk 'i2c', so we have to maintain + * a translation layer, and a series of functions to + * convert i2c bus + device address into a unit id. + */ +struct saa7164_unit { + enum saa7164_unit_type type; + u8 id; + char *name; + enum saa7164_i2c_bus_nr i2c_bus_nr; + u8 i2c_bus_addr; + u8 i2c_reg_len; +}; + +struct saa7164_board { + char *name; + enum port_t porta, portb; + enum { + SAA7164_CHIP_UNDEFINED = 0, + SAA7164_CHIP_REV2, + SAA7164_CHIP_REV3, + } chiprev; + struct saa7164_unit unit[SAA7164_MAX_UNITS]; +}; + +struct saa7164_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +struct saa7164_fw_status { + + /* RISC Core details */ + u32 status; + u32 mode; + u32 spec; + u32 inst; + u32 cpuload; + u32 remainheap; + + /* Firmware version */ + u32 version; + u32 major; + u32 sub; + u32 rel; + u32 buildnr; +}; + +struct saa7164_dvb { + struct mutex lock; + struct dvb_adapter adapter; + struct dvb_frontend *frontend; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; + int feeding; +}; + +struct saa7164_i2c { + struct saa7164_dev *dev; + + enum saa7164_i2c_bus_nr nr; + + /* I2C I/O */ + struct i2c_adapter i2c_adap; + struct i2c_algo_bit_data i2c_algo; + struct i2c_client i2c_client; + u32 i2c_rc; +}; + +struct saa7164_tsport; + +struct saa7164_buffer { + struct list_head list; + + u32 nr; + + struct saa7164_tsport *port; + + /* Hardware Specific */ + /* PCI Memory allocations */ + enum saa7164_buffer_flags flags; /* Free, Busy, Full */ + + /* A block of page align PCI memory */ + u32 pci_size; /* PCI allocation size in bytes */ + u64 *cpu; /* Virtual address */ + dma_addr_t dma; /* Physical address */ + + /* A page table that splits the block into a number of entries */ + u32 pt_size; /* PCI allocation size in bytes */ + u64 *pt_cpu; /* Virtual address */ + dma_addr_t pt_dma; /* Physical address */ +}; + +struct saa7164_tsport { + + struct saa7164_dev *dev; + int nr; + enum port_t type; + + struct saa7164_dvb dvb; + + /* HW related stream parameters */ + tmHWStreamParameters_t hw_streamingparams; + + /* DMA configuration values, is seeded during initialization */ + tmComResDMATermDescrHeader_t hwcfg; + + /* hardware specific registers */ + u32 bufcounter; + u32 pitch; + u32 bufsize; + u32 bufoffset; + u32 bufptr32l; + u32 bufptr32h; + u64 bufptr64; + + u32 numpte; /* Number of entries in array, only valid in head */ + struct mutex dmaqueue_lock; + struct mutex dummy_dmaqueue_lock; + struct saa7164_buffer dmaqueue; + struct saa7164_buffer dummy_dmaqueue; + +}; + +struct saa7164_dev { + struct list_head devlist; + atomic_t refcount; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + u32 __iomem *lmmio2; + u8 __iomem *bmmio2; + int pci_irqmask; + + /* board details */ + int nr; + int hwrevision; + u32 board; + char name[32]; + + /* firmware status */ + struct saa7164_fw_status fw_status; + + tmComResHWDescr_t hwdesc; + tmComResInterfaceDescr_t intfdesc; + tmComResBusDescr_t busdesc; + + tmComResBusInfo_t bus; + + /* TODO: Urgh, remove volatiles */ + volatile u32 *InterruptStatus; + volatile u32 *InterruptAck; + + struct cmd cmds[SAA_CMD_MAX_MSG_UNITS]; + struct mutex lock; + + /* I2c related */ + struct saa7164_i2c i2c_bus[3]; + + /* Transport related */ + struct saa7164_tsport ts1, ts2; + + /* Deferred command/api interrupts handling */ + struct work_struct workcmd; + +}; + +extern struct list_head saa7164_devlist; + +/* ----------------------------------------------------------- */ +/* saa7164-core.c */ +void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr); +void saa7164_dumphex16(struct saa7164_dev *dev, u8 *buf, int len); +void saa7164_getfirmwarestatus(struct saa7164_dev *dev); +u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-fw.c */ +int saa7164_downloadfirmware(struct saa7164_dev *dev); + +/* ----------------------------------------------------------- */ +/* saa7164-i2c.c */ +extern int saa7164_i2c_register(struct saa7164_i2c *bus); +extern int saa7164_i2c_unregister(struct saa7164_i2c *bus); +extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus, + unsigned int cmd, void *arg); + +/* ----------------------------------------------------------- */ +/* saa7164-bus.c */ +int saa7164_bus_setup(struct saa7164_dev *dev); +void saa7164_bus_dump(struct saa7164_dev *dev); +int saa7164_bus_set(struct saa7164_dev *dev, tmComResInfo_t* msg, void *buf); +int saa7164_bus_get(struct saa7164_dev *dev, tmComResInfo_t* msg, + void *buf, int peekonly); + +/* ----------------------------------------------------------- */ +/* saa7164-cmd.c */ +int saa7164_cmd_send(struct saa7164_dev *dev, + u8 id, tmComResCmd_t command, u16 controlselector, + u16 size, void *buf); +void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno); + +/* ----------------------------------------------------------- */ +/* saa7164-api.c */ +int saa7164_api_test(struct saa7164_dev *dev); +int saa7164_api_get_fw_version(struct saa7164_dev *dev, u32 *version); +int saa7164_api_enum_subdevs(struct saa7164_dev *dev); +int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg, + u32 datalen, u8 *data); +int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_dif_write(struct saa7164_i2c *bus, u8 addr, + u32 datalen, u8 *data); +int saa7164_api_read_eeprom(struct saa7164_dev *dev, u8 *buf, int buflen); +int saa7164_api_set_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_clear_gpiobit(struct saa7164_dev *dev, u8 unitid, u8 pin); +int saa7164_api_transition_port(struct saa7164_tsport *port, u8 mode); + +/* ----------------------------------------------------------- */ +/* saa7164-cards.c */ +extern struct saa7164_board saa7164_boards[]; +extern const unsigned int saa7164_bcount; + +extern struct saa7164_subid saa7164_subids[]; +extern const unsigned int saa7164_idcount; + +extern void saa7164_card_list(struct saa7164_dev *dev); +extern void saa7164_gpio_setup(struct saa7164_dev *dev); +extern void saa7164_card_setup(struct saa7164_dev *dev); + +extern int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr); +extern int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr); +extern char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid); + +/* ----------------------------------------------------------- */ +/* saa7164-dvb.c */ +extern int saa7164_dvb_register(struct saa7164_tsport *port); +extern int saa7164_dvb_unregister(struct saa7164_tsport *port); + +/* ----------------------------------------------------------- */ +/* saa7164-buffer.c */ +extern struct saa7164_buffer *saa7164_buffer_alloc(struct saa7164_tsport *port, + u32 len); +extern int saa7164_buffer_dealloc(struct saa7164_tsport *port, + struct saa7164_buffer *buf); + +/* ----------------------------------------------------------- */ + +extern unsigned int debug; +#define dprintk(level, fmt, arg...)\ + do { if (debug & level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define log_warn(fmt, arg...)\ + do { \ + printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define log_err(fmt, arg...)\ + do { \ + printk(KERN_ERROR "%s: " fmt, dev->name, ## arg);\ + } while (0) + +#define saa7164_readl(reg) readl(dev->lmmio + ((reg) >> 2)) +#define saa7164_writel(reg, value) \ +do { \ + printk(KERN_ERR "writel(%x, %llx)\n", value, (u64)(dev->lmmio + ((reg) >> 2))); \ + writel((value), dev->lmmio + ((reg) >> 2)); \ +} while (0) + +#define saa7164_readb(reg) readl(dev->bmmio + (reg)) +#define saa7164_writeb(reg, value) writel((value), dev->bmmio + (reg)) +