From: Jean Pihet Date: Wed, 25 Apr 2012 11:13:17 +0000 (+0530) Subject: ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/ X-Git-Tag: master-2012-08-06~118^2~1^2~1^2 X-Git-Url: http://pileus.org/git/?a=commitdiff_plain;h=21ff63ad131218048525fbd37d065ce61f03bcbd;hp=7fb149ffe357d6ad672cf9325181530b4c478a81;p=~andy%2Flinux ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/ After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a generic driver. Move it to drivers/power/avs/. The build is controlled by the following Kconfig options: . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support, . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or version 2 of the SmartReflex IP, . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex. Signed-off-by: Jean Pihet Signed-off-by: J Keerthy Acked-by: Rafael J. Wysocki Reviewed-by: Kevin Hilman Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 518444acc90..f8ee10a06f4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -70,8 +70,8 @@ obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o \ cpuidle44xx.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o -obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o smartreflex.o -obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o +obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o +obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bba384dfbcf..816dec062f3 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -45,26 +45,12 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS_CLASS -menuconfig POWER_AVS - tristate "Adaptive Voltage Scaling class support" - help - AVS(Adaptive Voltage Scaling) is a power management technique which - finely controls the operating voltage of a device in order to optimize - (i.e. reduce) its power consumption. - At a given operating point the voltage is adapted depending on - static factors (chip manufacturing process) and dynamic factors - (temperature depending performance). - AVS is also called SmartReflex on OMAP devices. - - Say Y here to enable Adaptive Voltage Scaling class support. - -if POWER_AVS - config POWER_AVS_OMAP bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM + depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM help - Say Y to enable AVS support on OMAP containing the version 1 or + Say Y to enable AVS(Adaptive Voltage Scaling) + support on OMAP containing the version 1 or version 2 of the SmartReflex IP. V1 is the 65nm version used in OMAP3430. V2 is the update for the 45nm version of the IP used in OMAP3630 @@ -89,8 +75,6 @@ config POWER_AVS_OMAP_CLASS3 Class 3 implementation of Smartreflex employs continuous hardware voltage calibration. -endif # POWER_AVS - config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 99dc29f2f2f..d416773771e 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -308,3 +308,5 @@ config AB8500_BATTERY_THERM_ON_BATCTRL Say Y to enable battery temperature measurements using thermistor connected on BATCTRL ADC. endif # POWER_SUPPLY + +source "drivers/power/avs/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b6b243416c0..ee58afb1e71 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -43,4 +43,5 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o +obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig new file mode 100644 index 00000000000..18493f7a8f6 --- /dev/null +++ b/drivers/power/avs/Kconfig @@ -0,0 +1,12 @@ +menuconfig POWER_AVS + tristate "Adaptive Voltage Scaling class support" + help + AVS is a power management technique which finely controls the + operating voltage of a device in order to optimize (i.e. reduce) + its power consumption. + At a given operating point the voltage is adapted depending on + static factors (chip manufacturing process) and dynamic factors + (temperature depending performance). + AVS is also called SmartReflex on OMAP devices. + + Say Y here to enable Adaptive Voltage Scaling class support. diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile new file mode 100644 index 00000000000..0843386a6c1 --- /dev/null +++ b/drivers/power/avs/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POWER_AVS_OMAP) += smartreflex.o diff --git a/arch/arm/mach-omap2/smartreflex.c b/drivers/power/avs/smartreflex.c similarity index 99% rename from arch/arm/mach-omap2/smartreflex.c rename to drivers/power/avs/smartreflex.c index 515041ccccb..44efc6e202a 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -3,7 +3,7 @@ * * Author: Thara Gopinath * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2012 Texas Instruments, Inc. * Thara Gopinath * * Copyright (C) 2008 Nokia Corporation @@ -27,9 +27,6 @@ #include #include -#include "common.h" -#include "pm.h" - #define SMARTREFLEX_NAME_LEN 16 #define NVALUE_NAME_LEN 40 #define SR_DISABLE_TIMEOUT 200