config RT2800PCI
tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
- depends on PCI || SOC_RT288X || SOC_RT305X
+ depends on PCI
select RT2800_LIB
select RT2800_LIB_MMIO
select RT2X00_LIB_MMIO
- select RT2X00_LIB_PCI if PCI
- select RT2X00_LIB_SOC if SOC_RT288X || SOC_RT305X
+ select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
select RT2X00_LIB_CRYPTO
select CRC_CCITT
endif
+config RT2800SOC
+ tristate "Ralink WiSoC support"
+ depends on SOC_RT288X || SOC_RT305X
+ select RT2X00_LIB_SOC
+ select RT2X00_LIB_MMIO
+ select RT2X00_LIB_CRYPTO
+ select RT2X00_LIB_FIRMWARE
+ select RT2800_LIB
+ select RT2800_LIB_MMIO
+ ---help---
+ This adds support for Ralink WiSoC devices.
+ Supported chips: RT2880, RT3050, RT3052, RT3350, RT3352.
+
+ When compiled as a module, this driver will be called rt2800soc.
+
+
config RT2800_LIB
tristate
obj-$(CONFIG_RT2500USB) += rt2500usb.o
obj-$(CONFIG_RT73USB) += rt73usb.o
obj-$(CONFIG_RT2800USB) += rt2800usb.o
+obj-$(CONFIG_RT2800SOC) += rt2800soc.o
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/platform_device.h>
#include <linux/eeprom_93cx6.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
-#include "rt2x00soc.h"
#include "rt2800lib.h"
#include "rt2800mmio.h"
#include "rt2800.h"
module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-#ifdef CONFIG_PCI
static bool rt2800pci_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
{
return modparam_nohwcrypt;
#endif
{ 0, }
};
-#endif /* CONFIG_PCI */
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-#ifdef CONFIG_PCI
MODULE_FIRMWARE(FIRMWARE_RT2860);
MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-#endif /* CONFIG_PCI */
MODULE_LICENSE("GPL");
-#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
-static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
-{
- return modparam_nohwcrypt;
-}
-
-static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
-{
- rt2800_disable_radio(rt2x00dev);
- rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
- rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
-}
-
-static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
- enum dev_state state)
-{
- int retval = 0;
-
- switch (state) {
- case STATE_RADIO_ON:
- retval = rt2800mmio_enable_radio(rt2x00dev);
- break;
-
- case STATE_RADIO_OFF:
- rt2800soc_disable_radio(rt2x00dev);
- break;
-
- case STATE_RADIO_IRQ_ON:
- case STATE_RADIO_IRQ_OFF:
- rt2800mmio_toggle_irq(rt2x00dev, state);
- break;
-
- case STATE_DEEP_SLEEP:
- case STATE_SLEEP:
- case STATE_STANDBY:
- case STATE_AWAKE:
- /* These states are not supported, but don't report an error */
- retval = 0;
- break;
-
- default:
- retval = -ENOTSUPP;
- break;
- }
-
- if (unlikely(retval))
- rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
- state, retval);
-
- return retval;
-}
-
-static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
-{
- void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
-
- if (!base_addr)
- return -ENOMEM;
-
- memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
-
- iounmap(base_addr);
- return 0;
-}
-
-/* Firmware functions */
-static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
-{
- WARN_ON_ONCE(1);
- return NULL;
-}
-
-static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev,
- const u8 *data, const size_t len)
-{
- WARN_ON_ONCE(1);
- return 0;
-}
-
-static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev,
- const u8 *data, const size_t len)
-{
- WARN_ON_ONCE(1);
- return 0;
-}
-
-static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev,
- const u8 *data, const size_t len)
-{
- WARN_ON_ONCE(1);
- return 0;
-}
-
-static const struct ieee80211_ops rt2800soc_mac80211_ops = {
- .tx = rt2x00mac_tx,
- .start = rt2x00mac_start,
- .stop = rt2x00mac_stop,
- .add_interface = rt2x00mac_add_interface,
- .remove_interface = rt2x00mac_remove_interface,
- .config = rt2x00mac_config,
- .configure_filter = rt2x00mac_configure_filter,
- .set_key = rt2x00mac_set_key,
- .sw_scan_start = rt2x00mac_sw_scan_start,
- .sw_scan_complete = rt2x00mac_sw_scan_complete,
- .get_stats = rt2x00mac_get_stats,
- .get_tkip_seq = rt2800_get_tkip_seq,
- .set_rts_threshold = rt2800_set_rts_threshold,
- .sta_add = rt2x00mac_sta_add,
- .sta_remove = rt2x00mac_sta_remove,
- .bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2800_conf_tx,
- .get_tsf = rt2800_get_tsf,
- .rfkill_poll = rt2x00mac_rfkill_poll,
- .ampdu_action = rt2800_ampdu_action,
- .flush = rt2x00mac_flush,
- .get_survey = rt2800_get_survey,
- .get_ringparam = rt2x00mac_get_ringparam,
- .tx_frames_pending = rt2x00mac_tx_frames_pending,
-};
-
-static const struct rt2800_ops rt2800soc_rt2800_ops = {
- .register_read = rt2x00mmio_register_read,
- .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */
- .register_write = rt2x00mmio_register_write,
- .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */
- .register_multiread = rt2x00mmio_register_multiread,
- .register_multiwrite = rt2x00mmio_register_multiwrite,
- .regbusy_read = rt2x00mmio_regbusy_read,
- .read_eeprom = rt2800soc_read_eeprom,
- .hwcrypt_disabled = rt2800soc_hwcrypt_disabled,
- .drv_write_firmware = rt2800soc_write_firmware,
- .drv_init_registers = rt2800mmio_init_registers,
- .drv_get_txwi = rt2800mmio_get_txwi,
-};
-
-static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
- .irq_handler = rt2800mmio_interrupt,
- .txstatus_tasklet = rt2800mmio_txstatus_tasklet,
- .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet,
- .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
- .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
- .autowake_tasklet = rt2800mmio_autowake_tasklet,
- .probe_hw = rt2800_probe_hw,
- .get_firmware_name = rt2800soc_get_firmware_name,
- .check_firmware = rt2800soc_check_firmware,
- .load_firmware = rt2800soc_load_firmware,
- .initialize = rt2x00mmio_initialize,
- .uninitialize = rt2x00mmio_uninitialize,
- .get_entry_state = rt2800mmio_get_entry_state,
- .clear_entry = rt2800mmio_clear_entry,
- .set_device_state = rt2800soc_set_device_state,
- .rfkill_poll = rt2800_rfkill_poll,
- .link_stats = rt2800_link_stats,
- .reset_tuner = rt2800_reset_tuner,
- .link_tuner = rt2800_link_tuner,
- .gain_calibration = rt2800_gain_calibration,
- .vco_calibration = rt2800_vco_calibration,
- .start_queue = rt2800mmio_start_queue,
- .kick_queue = rt2800mmio_kick_queue,
- .stop_queue = rt2800mmio_stop_queue,
- .flush_queue = rt2x00mmio_flush_queue,
- .write_tx_desc = rt2800mmio_write_tx_desc,
- .write_tx_data = rt2800_write_tx_data,
- .write_beacon = rt2800_write_beacon,
- .clear_beacon = rt2800_clear_beacon,
- .fill_rxdone = rt2800mmio_fill_rxdone,
- .config_shared_key = rt2800_config_shared_key,
- .config_pairwise_key = rt2800_config_pairwise_key,
- .config_filter = rt2800_config_filter,
- .config_intf = rt2800_config_intf,
- .config_erp = rt2800_config_erp,
- .config_ant = rt2800_config_ant,
- .config = rt2800_config,
- .sta_add = rt2800_sta_add,
- .sta_remove = rt2800_sta_remove,
-};
-
-static const struct rt2x00_ops rt2800soc_ops = {
- .name = KBUILD_MODNAME,
- .drv_data_size = sizeof(struct rt2800_drv_data),
- .max_ap_intf = 8,
- .eeprom_size = EEPROM_SIZE,
- .rf_size = RF_SIZE,
- .tx_queues = NUM_TX_QUEUES,
- .queue_init = rt2800mmio_queue_init,
- .lib = &rt2800soc_rt2x00_ops,
- .drv = &rt2800soc_rt2800_ops,
- .hw = &rt2800soc_mac80211_ops,
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
- .debugfs = &rt2800_rt2x00debug,
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-};
-
-static int rt2800soc_probe(struct platform_device *pdev)
-{
- return rt2x00soc_probe(pdev, &rt2800soc_ops);
-}
-
-static struct platform_driver rt2800soc_driver = {
- .driver = {
- .name = "rt2800_wmac",
- .owner = THIS_MODULE,
- .mod_name = KBUILD_MODNAME,
- },
- .probe = rt2800soc_probe,
- .remove = rt2x00soc_remove,
- .suspend = rt2x00soc_suspend,
- .resume = rt2x00soc_resume,
-};
-#endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */
-
-#ifdef CONFIG_PCI
static int rt2800pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
};
-#endif /* CONFIG_PCI */
+
static int __init rt2800pci_init(void)
{
- int ret = 0;
-
-#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
- ret = platform_driver_register(&rt2800soc_driver);
- if (ret)
- return ret;
-#endif
-#ifdef CONFIG_PCI
- ret = pci_register_driver(&rt2800pci_driver);
- if (ret) {
-#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
- platform_driver_unregister(&rt2800soc_driver);
-#endif
- return ret;
- }
-#endif
-
- return ret;
+ return pci_register_driver(&rt2800pci_driver);
}
static void __exit rt2800pci_exit(void)
{
-#ifdef CONFIG_PCI
pci_unregister_driver(&rt2800pci_driver);
-#endif
-#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
- platform_driver_unregister(&rt2800soc_driver);
-#endif
}
module_init(rt2800pci_init);
--- /dev/null
+/* Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
+ * Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
+ * Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+ * Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
+ * Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+ * Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
+ * <http://rt2x00.serialmonkey.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Module: rt2800soc
+ * Abstract: rt2800 WiSoC specific routines.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "rt2x00.h"
+#include "rt2x00mmio.h"
+#include "rt2x00soc.h"
+#include "rt2800.h"
+#include "rt2800lib.h"
+#include "rt2800mmio.h"
+
+/* Allow hardware encryption to be disabled. */
+static bool modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+static bool rt2800soc_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev)
+{
+ return modparam_nohwcrypt;
+}
+
+static void rt2800soc_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_disable_radio(rt2x00dev);
+ rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+ rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0);
+}
+
+static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ int retval = 0;
+
+ switch (state) {
+ case STATE_RADIO_ON:
+ retval = rt2800mmio_enable_radio(rt2x00dev);
+ break;
+
+ case STATE_RADIO_OFF:
+ rt2800soc_disable_radio(rt2x00dev);
+ break;
+
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ rt2800mmio_toggle_irq(rt2x00dev, state);
+ break;
+
+ case STATE_DEEP_SLEEP:
+ case STATE_SLEEP:
+ case STATE_STANDBY:
+ case STATE_AWAKE:
+ /* These states are not supported, but don't report an error */
+ retval = 0;
+ break;
+
+ default:
+ retval = -ENOTSUPP;
+ break;
+ }
+
+ if (unlikely(retval))
+ rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
+ state, retval);
+
+ return retval;
+}
+
+static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
+
+ if (!base_addr)
+ return -ENOMEM;
+
+ memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
+
+ iounmap(base_addr);
+ return 0;
+}
+
+/* Firmware functions */
+static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+ WARN_ON_ONCE(1);
+ return NULL;
+}
+
+static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ WARN_ON_ONCE(1);
+ return 0;
+}
+
+static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ WARN_ON_ONCE(1);
+ return 0;
+}
+
+static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev,
+ const u8 *data, const size_t len)
+{
+ WARN_ON_ONCE(1);
+ return 0;
+}
+
+static const struct ieee80211_ops rt2800soc_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
+ .get_stats = rt2x00mac_get_stats,
+ .get_tkip_seq = rt2800_get_tkip_seq,
+ .set_rts_threshold = rt2800_set_rts_threshold,
+ .sta_add = rt2x00mac_sta_add,
+ .sta_remove = rt2x00mac_sta_remove,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2800_conf_tx,
+ .get_tsf = rt2800_get_tsf,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
+ .ampdu_action = rt2800_ampdu_action,
+ .flush = rt2x00mac_flush,
+ .get_survey = rt2800_get_survey,
+ .get_ringparam = rt2x00mac_get_ringparam,
+ .tx_frames_pending = rt2x00mac_tx_frames_pending,
+};
+
+static const struct rt2800_ops rt2800soc_rt2800_ops = {
+ .register_read = rt2x00mmio_register_read,
+ .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */
+ .register_write = rt2x00mmio_register_write,
+ .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */
+ .register_multiread = rt2x00mmio_register_multiread,
+ .register_multiwrite = rt2x00mmio_register_multiwrite,
+ .regbusy_read = rt2x00mmio_regbusy_read,
+ .read_eeprom = rt2800soc_read_eeprom,
+ .hwcrypt_disabled = rt2800soc_hwcrypt_disabled,
+ .drv_write_firmware = rt2800soc_write_firmware,
+ .drv_init_registers = rt2800mmio_init_registers,
+ .drv_get_txwi = rt2800mmio_get_txwi,
+};
+
+static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
+ .irq_handler = rt2800mmio_interrupt,
+ .txstatus_tasklet = rt2800mmio_txstatus_tasklet,
+ .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet,
+ .tbtt_tasklet = rt2800mmio_tbtt_tasklet,
+ .rxdone_tasklet = rt2800mmio_rxdone_tasklet,
+ .autowake_tasklet = rt2800mmio_autowake_tasklet,
+ .probe_hw = rt2800_probe_hw,
+ .get_firmware_name = rt2800soc_get_firmware_name,
+ .check_firmware = rt2800soc_check_firmware,
+ .load_firmware = rt2800soc_load_firmware,
+ .initialize = rt2x00mmio_initialize,
+ .uninitialize = rt2x00mmio_uninitialize,
+ .get_entry_state = rt2800mmio_get_entry_state,
+ .clear_entry = rt2800mmio_clear_entry,
+ .set_device_state = rt2800soc_set_device_state,
+ .rfkill_poll = rt2800_rfkill_poll,
+ .link_stats = rt2800_link_stats,
+ .reset_tuner = rt2800_reset_tuner,
+ .link_tuner = rt2800_link_tuner,
+ .gain_calibration = rt2800_gain_calibration,
+ .vco_calibration = rt2800_vco_calibration,
+ .start_queue = rt2800mmio_start_queue,
+ .kick_queue = rt2800mmio_kick_queue,
+ .stop_queue = rt2800mmio_stop_queue,
+ .flush_queue = rt2x00mmio_flush_queue,
+ .write_tx_desc = rt2800mmio_write_tx_desc,
+ .write_tx_data = rt2800_write_tx_data,
+ .write_beacon = rt2800_write_beacon,
+ .clear_beacon = rt2800_clear_beacon,
+ .fill_rxdone = rt2800mmio_fill_rxdone,
+ .config_shared_key = rt2800_config_shared_key,
+ .config_pairwise_key = rt2800_config_pairwise_key,
+ .config_filter = rt2800_config_filter,
+ .config_intf = rt2800_config_intf,
+ .config_erp = rt2800_config_erp,
+ .config_ant = rt2800_config_ant,
+ .config = rt2800_config,
+ .sta_add = rt2800_sta_add,
+ .sta_remove = rt2800_sta_remove,
+};
+
+static const struct rt2x00_ops rt2800soc_ops = {
+ .name = KBUILD_MODNAME,
+ .drv_data_size = sizeof(struct rt2800_drv_data),
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .queue_init = rt2800mmio_queue_init,
+ .lib = &rt2800soc_rt2x00_ops,
+ .drv = &rt2800soc_rt2800_ops,
+ .hw = &rt2800soc_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2800_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+static int rt2800soc_probe(struct platform_device *pdev)
+{
+ return rt2x00soc_probe(pdev, &rt2800soc_ops);
+}
+
+static struct platform_driver rt2800soc_driver = {
+ .driver = {
+ .name = "rt2800_wmac",
+ .owner = THIS_MODULE,
+ .mod_name = KBUILD_MODNAME,
+ },
+ .probe = rt2800soc_probe,
+ .remove = rt2x00soc_remove,
+ .suspend = rt2x00soc_suspend,
+ .resume = rt2x00soc_resume,
+};
+
+module_platform_driver(rt2800soc_driver);
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink WiSoC Wireless LAN driver.");
+MODULE_LICENSE("GPL");
projects / ~andy / linux / commitdiff