]> Pileus Git - ~andy/linux/commitdiff
watchdog: clean-up f71808e_wdt.c
authorLutz Ballaschke <vegan.grindcore@googlemail.com>
Sun, 26 Sep 2010 14:38:20 +0000 (16:38 +0200)
committerWim Van Sebroeck <wim@iguana.be>
Wed, 12 Jan 2011 10:21:27 +0000 (10:21 +0000)
Cleaned up and replaced some magic numbers by constants.

Signed-off-by: Lutz Ballaschke <vegan.grindcore@googlemail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
drivers/watchdog/f71808e_wdt.c

index 65e579635dba6cfa1754c0e648440b1dca6ff857..3c9142474d1865111ac0e77006e4f4ea40815680 100644 (file)
 #define SIO_REG_DEVID          0x20    /* Device ID (2 bytes) */
 #define SIO_REG_DEVREV         0x22    /* Device revision */
 #define SIO_REG_MANID          0x23    /* Fintek ID (2 bytes) */
+#define SIO_REG_MFUNCT1                0x29    /* Multi function select 1 */
+#define SIO_REG_MFUNCT2                0x2a    /* Multi function select 2 */
+#define SIO_REG_MFUNCT3                0x2b    /* Multi function select 3 */
 #define SIO_REG_ENABLE         0x30    /* Logical device enable */
 #define SIO_REG_ADDR           0x60    /* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID          0x1934  /* Manufacturers ID */
-#define SIO_F71808_ID          0x0901  /* Chipset ID */
-#define SIO_F71858_ID          0x0507  /* Chipset ID */
+#define SIO_F71808_ID          0x0901  /* Chipset ID */
+#define SIO_F71858_ID          0x0507  /* Chipset ID */
 #define SIO_F71862_ID          0x0601  /* Chipset ID */
 #define SIO_F71882_ID          0x0541  /* Chipset ID */
 #define SIO_F71889_ID          0x0723  /* Chipset ID */
 
-#define        F71882FG_REG_START              0x01
-
 #define F71808FG_REG_WDO_CONF          0xf0
 #define F71808FG_REG_WDT_CONF          0xf5
 #define F71808FG_REG_WD_TIME           0xf6
@@ -76,7 +77,7 @@ module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
 static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
-static int timeout = 60;       /* default timeout in seconds */
+static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout,
        "Watchdog timeout in seconds. 1<= timeout <="
@@ -299,19 +300,19 @@ static int watchdog_start(void)
        switch (watchdog.type) {
        case f71808fg:
                /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
-               superio_clear_bit(watchdog.sioaddr, 0x2a, 3);
-               superio_clear_bit(watchdog.sioaddr, 0x2b, 3);
+               superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3);
+               superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3);
                break;
 
        case f71882fg:
                /* Set pin 56 to WDTRST# */
-               superio_set_bit(watchdog.sioaddr, 0x29, 1);
+               superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1);
                break;
 
        case f71889fg:
                /* set pin 40 to WDTRST# */
-               superio_outb(watchdog.sioaddr, 0x2b,
-                               superio_inb(watchdog.sioaddr, 0x2b) & 0xcf);
+               superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3,
+                       superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
                break;
 
        default: