ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS

Copy the device nodes from Koelsch reference into the Koeslch device
tree file. This will allow us to use a single DTS file regarless of
kernel configuration. In case of legacy C board code the device nodes
may or may not be used, but in the multiplatform case all the DT device
nodes are used.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c4e8b3a0cd13af0ff201f3df89a8d9821c2452dc..d431f3189bbaeb7270d43a5fa035fe02de1f0f1b 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Koelsch";
@@ -29,4 +30,32 @@
                #address-cells = <1>;
                #size-cells = <1>;
        };
+
+       leds {
+               compatible = "gpio-leds";
+               led6 {
+                       gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+               };
+               led7 {
+                       gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+               };
+               led8 {
+                       gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&pfc {
+       pinctrl-0 = <&scif0_pins &scif1_pins>;
+       pinctrl-names = "default";
+
+       scif0_pins: serial0 {
+               renesas,groups = "scif0_data_d";
+               renesas,function = "scif0";
+       };
+
+       scif1_pins: serial1 {
+               renesas,groups = "scif1_data_d";
+               renesas,function = "scif1";
+       };
 };