/*
* Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2012 Stephane Grosjean <s.grosjean@peak-system.com>
*
* Derived from the PCAN project file driver/src/pcan_pci.c:
*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include "sja1000.h"
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
-MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards");
-MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card");
+MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
MODULE_LICENSE("GPL v2");
#define DRV_NAME "peak_pci"
+struct peak_pciec_card;
struct peak_pci_chan {
void __iomem *cfg_base; /* Common for all channels */
struct net_device *prev_dev; /* Chain of network devices */
u16 icr_mask; /* Interrupt mask for fast ack */
+ struct peak_pciec_card *pciec_card; /* only for PCIeC LEDs */
};
#define PEAK_PCI_CAN_CLOCK (16000000 / 2)
#define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */
#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */
+#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */
+#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */
+#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */
+
+#define PEAK_PCI_CHAN_MAX 4
-static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80};
+static const u16 peak_pci_icr_masks[PEAK_PCI_CHAN_MAX] = {
+ 0x02, 0x01, 0x40, 0x80
+};
static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = {
{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+#ifdef CONFIG_CAN_PEAK_PCIEC
+ {PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+#endif
{0,}
};
MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
+#ifdef CONFIG_CAN_PEAK_PCIEC
+/*
+ * PCAN-ExpressCard needs I2C bit-banging configuration option.
+ */
+
+/* GPIOICR byte access offsets */
+#define PITA_GPOUT 0x18 /* GPx output value */
+#define PITA_GPIN 0x19 /* GPx input value */
+#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */
+
+/* I2C GP bits */
+#define PITA_GPIN_SCL 0x01 /* Serial Clock Line */
+#define PITA_GPIN_SDA 0x04 /* Serial DAta line */
+
+#define PCA9553_1_SLAVEADDR (0xC4 >> 1)
+
+/* PCA9553 LS0 fields values */
+enum {
+ PCA9553_LOW,
+ PCA9553_HIGHZ,
+ PCA9553_PWM0,
+ PCA9553_PWM1
+};
+
+/* LEDs control */
+#define PCA9553_ON PCA9553_LOW
+#define PCA9553_OFF PCA9553_HIGHZ
+#define PCA9553_SLOW PCA9553_PWM0
+#define PCA9553_FAST PCA9553_PWM1
+
+#define PCA9553_LED(c) (1 << (c))
+#define PCA9553_LED_STATE(s, c) ((s) << ((c) << 1))
+
+#define PCA9553_LED_ON(c) PCA9553_LED_STATE(PCA9553_ON, c)
+#define PCA9553_LED_OFF(c) PCA9553_LED_STATE(PCA9553_OFF, c)
+#define PCA9553_LED_SLOW(c) PCA9553_LED_STATE(PCA9553_SLOW, c)
+#define PCA9553_LED_FAST(c) PCA9553_LED_STATE(PCA9553_FAST, c)
+#define PCA9553_LED_MASK(c) PCA9553_LED_STATE(0x03, c)
+
+#define PCA9553_LED_OFF_ALL (PCA9553_LED_OFF(0) | PCA9553_LED_OFF(1))
+
+#define PCA9553_LS0_INIT 0x40 /* initial value (!= from 0x00) */
+
+struct peak_pciec_chan {
+ struct net_device *netdev;
+ unsigned long prev_rx_bytes;
+ unsigned long prev_tx_bytes;
+};
+
+struct peak_pciec_card {
+ void __iomem *cfg_base; /* Common for all channels */
+ void __iomem *reg_base; /* first channel base address */
+ u8 led_cache; /* leds state cache */
+
+ /* PCIExpressCard i2c data */
+ struct i2c_algo_bit_data i2c_bit;
+ struct i2c_adapter led_chip;
+ struct delayed_work led_work; /* led delayed work */
+ int chan_count;
+ struct peak_pciec_chan channel[PEAK_PCI_CHAN_MAX];
+};
+
+/* "normal" pci register write callback is overloaded for leds control */
+static void peak_pci_write_reg(const struct sja1000_priv *priv,
+ int port, u8 val);
+
+static inline void pita_set_scl_highz(struct peak_pciec_card *card)
+{
+ u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SCL;
+ writeb(gp_outen, card->cfg_base + PITA_GPOEN);
+}
+
+static inline void pita_set_sda_highz(struct peak_pciec_card *card)
+{
+ u8 gp_outen = readb(card->cfg_base + PITA_GPOEN) & ~PITA_GPIN_SDA;
+ writeb(gp_outen, card->cfg_base + PITA_GPOEN);
+}
+
+static void peak_pciec_init_pita_gpio(struct peak_pciec_card *card)
+{
+ /* raise SCL & SDA GPIOs to high-Z */
+ pita_set_scl_highz(card);
+ pita_set_sda_highz(card);
+}
+
+static void pita_setsda(void *data, int state)
+{
+ struct peak_pciec_card *card = (struct peak_pciec_card *)data;
+ u8 gp_out, gp_outen;
+
+ /* set output sda always to 0 */
+ gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SDA;
+ writeb(gp_out, card->cfg_base + PITA_GPOUT);
+
+ /* control output sda with GPOEN */
+ gp_outen = readb(card->cfg_base + PITA_GPOEN);
+ if (state)
+ gp_outen &= ~PITA_GPIN_SDA;
+ else
+ gp_outen |= PITA_GPIN_SDA;
+
+ writeb(gp_outen, card->cfg_base + PITA_GPOEN);
+}
+
+static void pita_setscl(void *data, int state)
+{
+ struct peak_pciec_card *card = (struct peak_pciec_card *)data;
+ u8 gp_out, gp_outen;
+
+ /* set output scl always to 0 */
+ gp_out = readb(card->cfg_base + PITA_GPOUT) & ~PITA_GPIN_SCL;
+ writeb(gp_out, card->cfg_base + PITA_GPOUT);
+
+ /* control output scl with GPOEN */
+ gp_outen = readb(card->cfg_base + PITA_GPOEN);
+ if (state)
+ gp_outen &= ~PITA_GPIN_SCL;
+ else
+ gp_outen |= PITA_GPIN_SCL;
+
+ writeb(gp_outen, card->cfg_base + PITA_GPOEN);
+}
+
+static int pita_getsda(void *data)
+{
+ struct peak_pciec_card *card = (struct peak_pciec_card *)data;
+
+ /* set tristate */
+ pita_set_sda_highz(card);
+
+ return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SDA) ? 1 : 0;
+}
+
+static int pita_getscl(void *data)
+{
+ struct peak_pciec_card *card = (struct peak_pciec_card *)data;
+
+ /* set tristate */
+ pita_set_scl_highz(card);
+
+ return (readb(card->cfg_base + PITA_GPIN) & PITA_GPIN_SCL) ? 1 : 0;
+}
+
+/*
+ * write commands to the LED chip though the I2C-bus of the PCAN-PCIeC
+ */
+static int peak_pciec_write_pca9553(struct peak_pciec_card *card,
+ u8 offset, u8 data)
+{
+ u8 buffer[2] = {
+ offset,
+ data
+ };
+ struct i2c_msg msg = {
+ .addr = PCA9553_1_SLAVEADDR,
+ .len = 2,
+ .buf = buffer,
+ };
+ int ret;
+
+ /* cache led mask */
+ if ((offset == 5) && (data == card->led_cache))
+ return 0;
+
+ ret = i2c_transfer(&card->led_chip, &msg, 1);
+ if (ret < 0)
+ return ret;
+
+ if (offset == 5)
+ card->led_cache = data;
+
+ return 0;
+}
+
+/*
+ * delayed work callback used to control the LEDs
+ */
+static void peak_pciec_led_work(struct work_struct *work)
+{
+ struct peak_pciec_card *card =
+ container_of(work, struct peak_pciec_card, led_work.work);
+ struct net_device *netdev;
+ u8 new_led = card->led_cache;
+ int i, up_count = 0;
+
+ /* first check what is to do */
+ for (i = 0; i < card->chan_count; i++) {
+ /* default is: not configured */
+ new_led &= ~PCA9553_LED_MASK(i);
+ new_led |= PCA9553_LED_ON(i);
+
+ netdev = card->channel[i].netdev;
+ if (!netdev || !(netdev->flags & IFF_UP))
+ continue;
+
+ up_count++;
+
+ /* no activity (but configured) */
+ new_led &= ~PCA9553_LED_MASK(i);
+ new_led |= PCA9553_LED_SLOW(i);
+
+ /* if bytes counters changed, set fast blinking led */
+ if (netdev->stats.rx_bytes != card->channel[i].prev_rx_bytes) {
+ card->channel[i].prev_rx_bytes = netdev->stats.rx_bytes;
+ new_led &= ~PCA9553_LED_MASK(i);
+ new_led |= PCA9553_LED_FAST(i);
+ }
+ if (netdev->stats.tx_bytes != card->channel[i].prev_tx_bytes) {
+ card->channel[i].prev_tx_bytes = netdev->stats.tx_bytes;
+ new_led &= ~PCA9553_LED_MASK(i);
+ new_led |= PCA9553_LED_FAST(i);
+ }
+ }
+
+ /* check if LS0 settings changed, only update i2c if so */
+ peak_pciec_write_pca9553(card, 5, new_led);
+
+ /* restart timer (except if no more configured channels) */
+ if (up_count)
+ schedule_delayed_work(&card->led_work, HZ);
+}
+
+/*
+ * set LEDs blinking state
+ */
+static void peak_pciec_set_leds(struct peak_pciec_card *card, u8 led_mask, u8 s)
+{
+ u8 new_led = card->led_cache;
+ int i;
+
+ /* first check what is to do */
+ for (i = 0; i < card->chan_count; i++)
+ if (led_mask & PCA9553_LED(i)) {
+ new_led &= ~PCA9553_LED_MASK(i);
+ new_led |= PCA9553_LED_STATE(s, i);
+ }
+
+ /* check if LS0 settings changed, only update i2c if so */
+ peak_pciec_write_pca9553(card, 5, new_led);
+}
+
+/*
+ * start one second delayed work to control LEDs
+ */
+static void peak_pciec_start_led_work(struct peak_pciec_card *card)
+{
+ if (!delayed_work_pending(&card->led_work))
+ schedule_delayed_work(&card->led_work, HZ);
+}
+
+/*
+ * stop LEDs delayed work
+ */
+static void peak_pciec_stop_led_work(struct peak_pciec_card *card)
+{
+ cancel_delayed_work_sync(&card->led_work);
+}
+
+/*
+ * initialize the PCA9553 4-bit I2C-bus LED chip
+ */
+static int peak_pciec_init_leds(struct peak_pciec_card *card)
+{
+ int err;
+
+ /* prescaler for frequency 0: "SLOW" = 1 Hz = "44" */
+ err = peak_pciec_write_pca9553(card, 1, 44 / 1);
+ if (err)
+ return err;
+
+ /* duty cycle 0: 50% */
+ err = peak_pciec_write_pca9553(card, 2, 0x80);
+ if (err)
+ return err;
+
+ /* prescaler for frequency 1: "FAST" = 5 Hz */
+ err = peak_pciec_write_pca9553(card, 3, 44 / 5);
+ if (err)
+ return err;
+
+ /* duty cycle 1: 50% */
+ err = peak_pciec_write_pca9553(card, 4, 0x80);
+ if (err)
+ return err;
+
+ /* switch LEDs to initial state */
+ return peak_pciec_write_pca9553(card, 5, PCA9553_LS0_INIT);
+}
+
+/*
+ * restore LEDs state to off peak_pciec_leds_exit
+ */
+static void peak_pciec_leds_exit(struct peak_pciec_card *card)
+{
+ /* switch LEDs to off */
+ peak_pciec_write_pca9553(card, 5, PCA9553_LED_OFF_ALL);
+}
+
+/*
+ * normal write sja1000 register method overloaded to catch when controller
+ * is started or stopped, to control leds
+ */
+static void peak_pciec_write_reg(const struct sja1000_priv *priv,
+ int port, u8 val)
+{
+ struct peak_pci_chan *chan = priv->priv;
+ struct peak_pciec_card *card = chan->pciec_card;
+ int c = (priv->reg_base - card->reg_base) / PEAK_PCI_CHAN_SIZE;
+
+ /* sja1000 register changes control the leds state */
+ if (port == REG_MOD)
+ switch (val) {
+ case MOD_RM:
+ /* Reset Mode: set led on */
+ peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_ON);
+ break;
+ case 0x00:
+ /* Normal Mode: led slow blinking and start led timer */
+ peak_pciec_set_leds(card, PCA9553_LED(c), PCA9553_SLOW);
+ peak_pciec_start_led_work(card);
+ break;
+ default:
+ break;
+ }
+
+ /* call base function */
+ peak_pci_write_reg(priv, port, val);
+}
+
+static struct i2c_algo_bit_data peak_pciec_i2c_bit_ops = {
+ .setsda = pita_setsda,
+ .setscl = pita_setscl,
+ .getsda = pita_getsda,
+ .getscl = pita_getscl,
+ .udelay = 10,
+ .timeout = HZ,
+};
+
+static int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
+{
+ struct sja1000_priv *priv = netdev_priv(dev);
+ struct peak_pci_chan *chan = priv->priv;
+ struct peak_pciec_card *card;
+ int err;
+
+ /* copy i2c object address from 1st channel */
+ if (chan->prev_dev) {
+ struct sja1000_priv *prev_priv = netdev_priv(chan->prev_dev);
+ struct peak_pci_chan *prev_chan = prev_priv->priv;
+
+ card = prev_chan->pciec_card;
+ if (!card)
+ return -ENODEV;
+
+ /* channel is the first one: do the init part */
+ } else {
+ /* create the bit banging I2C adapter structure */
+ card = kzalloc(sizeof(struct peak_pciec_card), GFP_KERNEL);
+ if (!card) {
+ dev_err(&pdev->dev,
+ "failed allocating memory for i2c chip\n");
+ return -ENOMEM;
+ }
+
+ card->cfg_base = chan->cfg_base;
+ card->reg_base = priv->reg_base;
+
+ card->led_chip.owner = THIS_MODULE;
+ card->led_chip.dev.parent = &pdev->dev;
+ card->led_chip.algo_data = &card->i2c_bit;
+ strncpy(card->led_chip.name, "peak_i2c",
+ sizeof(card->led_chip.name));
+
+ card->i2c_bit = peak_pciec_i2c_bit_ops;
+ card->i2c_bit.udelay = 10;
+ card->i2c_bit.timeout = HZ;
+ card->i2c_bit.data = card;
+
+ peak_pciec_init_pita_gpio(card);
+
+ err = i2c_bit_add_bus(&card->led_chip);
+ if (err) {
+ dev_err(&pdev->dev, "i2c init failed\n");
+ goto pciec_init_err_1;
+ }
+
+ err = peak_pciec_init_leds(card);
+ if (err) {
+ dev_err(&pdev->dev, "leds hardware init failed\n");
+ goto pciec_init_err_2;
+ }
+
+ INIT_DELAYED_WORK(&card->led_work, peak_pciec_led_work);
+ /* PCAN-ExpressCard needs its own callback for leds */
+ priv->write_reg = peak_pciec_write_reg;
+ }
+
+ chan->pciec_card = card;
+ card->channel[card->chan_count++].netdev = dev;
+
+ return 0;
+
+pciec_init_err_2:
+ i2c_del_adapter(&card->led_chip);
+
+pciec_init_err_1:
+ peak_pciec_init_pita_gpio(card);
+ kfree(card);
+
+ return err;
+}
+
+static void peak_pciec_remove(struct peak_pciec_card *card)
+{
+ peak_pciec_stop_led_work(card);
+ peak_pciec_leds_exit(card);
+ i2c_del_adapter(&card->led_chip);
+ peak_pciec_init_pita_gpio(card);
+ kfree(card);
+}
+
+#else /* CONFIG_CAN_PEAK_PCIEC */
+
+/*
+ * Placebo functions when PCAN-ExpressCard support is not selected
+ */
+static inline int peak_pciec_probe(struct pci_dev *pdev, struct net_device *dev)
+{
+ return -ENODEV;
+}
+
+static inline void peak_pciec_remove(struct peak_pciec_card *card)
+{
+}
+#endif /* CONFIG_CAN_PEAK_PCIEC */
+
static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
{
return readb(priv->reg_base + (port << 2));
SET_NETDEV_DEV(dev, &pdev->dev);
+ /* Create chain of SJA1000 devices */
+ chan->prev_dev = pci_get_drvdata(pdev);
+ pci_set_drvdata(pdev, dev);
+
+ /*
+ * PCAN-ExpressCard needs some additional i2c init.
+ * This must be done *before* register_sja1000dev() but
+ * *after* devices linkage
+ */
+ if (pdev->device == PEAK_PCIEC_DEVICE_ID) {
+ err = peak_pciec_probe(pdev, dev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed to probe device (err %d)\n",
+ err);
+ goto failure_free_dev;
+ }
+ }
+
err = register_sja1000dev(dev);
if (err) {
dev_err(&pdev->dev, "failed to register device\n");
- free_sja1000dev(dev);
- goto failure_remove_channels;
+ goto failure_free_dev;
}
- /* Create chain of SJA1000 devices */
- chan->prev_dev = pci_get_drvdata(pdev);
- pci_set_drvdata(pdev, dev);
-
dev_info(&pdev->dev,
"%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
dev->name, priv->reg_base, chan->cfg_base, dev->irq);
return 0;
+failure_free_dev:
+ pci_set_drvdata(pdev, chan->prev_dev);
+ free_sja1000dev(dev);
+
failure_remove_channels:
/* Disable interrupts */
writew(0x0, cfg_base + PITA_ICR + 2);
+ chan = NULL;
for (dev = pci_get_drvdata(pdev); dev; dev = chan->prev_dev) {
unregister_sja1000dev(dev);
free_sja1000dev(dev);
chan = priv->priv;
}
+ /* free any PCIeC resources too */
+ if (chan && chan->pciec_card)
+ peak_pciec_remove(chan->pciec_card);
+
pci_iounmap(pdev, reg_base);
failure_unmap_cfg_base:
unregister_sja1000dev(dev);
free_sja1000dev(dev);
dev = chan->prev_dev;
- if (!dev)
+
+ if (!dev) {
+ /* do that only for first channel */
+ if (chan->pciec_card)
+ peak_pciec_remove(chan->pciec_card);
break;
+ }
priv = netdev_priv(dev);
chan = priv->priv;
}
projects / ~andy / linux / commitdiff