static inline bool got_nohz_idle_kick(void)
{
int cpu = smp_processor_id();
- return idle_cpu(cpu) && test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu));
+
+ if (!test_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu)))
+ return false;
+
+ if (idle_cpu(cpu) && !need_resched())
+ return true;
+
+ /*
+ * We can't run Idle Load Balance on this CPU for this time so we
+ * cancel it and clear NOHZ_BALANCE_KICK
+ */
+ clear_bit(NOHZ_BALANCE_KICK, nohz_flags(cpu));
+ return false;
}
#else /* CONFIG_NO_HZ_COMMON */
{
s64 period = sched_avg_period();
- while ((s64)(rq->clock - rq->age_stamp) > period) {
+ while ((s64)(rq_clock(rq) - rq->age_stamp) > period) {
/*
* Inline assembly required to prevent the compiler
* optimising this loop into a divmod call.
p->sched_class->task_woken(rq, p);
if (rq->idle_stamp) {
- u64 delta = rq->clock - rq->idle_stamp;
+ u64 delta = rq_clock(rq) - rq->idle_stamp;
u64 max = 2*sysctl_sched_migration_cost;
if (delta > max)
rq = __task_rq_lock(p);
if (p->on_rq) {
+ /* check_preempt_curr() may use rq clock */
+ update_rq_clock(rq);
ttwu_do_wakeup(rq, p, wake_flags);
ret = 1;
}
void scheduler_ipi(void)
{
- if (llist_empty(&this_rq()->wake_list) && !got_nohz_idle_kick()
- && !tick_nohz_full_cpu(smp_processor_id()))
+ if (llist_empty(&this_rq()->wake_list)
+ && !tick_nohz_full_cpu(smp_processor_id())
+ && !got_nohz_idle_kick())
return;
/*
/*
* Check if someone kicked us for doing the nohz idle load balance.
*/
- if (unlikely(got_nohz_idle_kick() && !need_resched())) {
+ if (unlikely(got_nohz_idle_kick())) {
this_rq()->idle_balance = 1;
raise_softirq_irqoff(SCHED_SOFTIRQ);
}
return atomic_read(&this->nr_iowait);
}
-unsigned long this_cpu_load(void)
-{
- struct rq *this = this_rq();
- return this->cpu_load[0];
-}
-
-
-/*
- * Global load-average calculations
- *
- * We take a distributed and async approach to calculating the global load-avg
- * in order to minimize overhead.
- *
- * The global load average is an exponentially decaying average of nr_running +
- * nr_uninterruptible.
- *
- * Once every LOAD_FREQ:
- *
- * nr_active = 0;
- * for_each_possible_cpu(cpu)
- * nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
- *
- * avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
- *
- * Due to a number of reasons the above turns in the mess below:
- *
- * - for_each_possible_cpu() is prohibitively expensive on machines with
- * serious number of cpus, therefore we need to take a distributed approach
- * to calculating nr_active.
- *
- * \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
- * = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
- *
- * So assuming nr_active := 0 when we start out -- true per definition, we
- * can simply take per-cpu deltas and fold those into a global accumulate
- * to obtain the same result. See calc_load_fold_active().
- *
- * Furthermore, in order to avoid synchronizing all per-cpu delta folding
- * across the machine, we assume 10 ticks is sufficient time for every
- * cpu to have completed this task.
- *
- * This places an upper-bound on the IRQ-off latency of the machine. Then
- * again, being late doesn't loose the delta, just wrecks the sample.
- *
- * - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
- * this would add another cross-cpu cacheline miss and atomic operation
- * to the wakeup path. Instead we increment on whatever cpu the task ran
- * when it went into uninterruptible state and decrement on whatever cpu
- * did the wakeup. This means that only the sum of nr_uninterruptible over
- * all cpus yields the correct result.
- *
- * This covers the NO_HZ=n code, for extra head-aches, see the comment below.
- */
-
-/* Variables and functions for calc_load */
-static atomic_long_t calc_load_tasks;
-static unsigned long calc_load_update;
-unsigned long avenrun[3];
-EXPORT_SYMBOL(avenrun); /* should be removed */
-
-/**
- * get_avenrun - get the load average array
- * @loads: pointer to dest load array
- * @offset: offset to add
- * @shift: shift count to shift the result left
- *
- * These values are estimates at best, so no need for locking.
- */
-void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
-{
- loads[0] = (avenrun[0] + offset) << shift;
- loads[1] = (avenrun[1] + offset) << shift;
- loads[2] = (avenrun[2] + offset) << shift;
-}
-
-static long calc_load_fold_active(struct rq *this_rq)
-{
- long nr_active, delta = 0;
-
- nr_active = this_rq->nr_running;
- nr_active += (long) this_rq->nr_uninterruptible;
-
- if (nr_active != this_rq->calc_load_active) {
- delta = nr_active - this_rq->calc_load_active;
- this_rq->calc_load_active = nr_active;
- }
-
- return delta;
-}
-
-/*
- * a1 = a0 * e + a * (1 - e)
- */
-static unsigned long
-calc_load(unsigned long load, unsigned long exp, unsigned long active)
-{
- load *= exp;
- load += active * (FIXED_1 - exp);
- load += 1UL << (FSHIFT - 1);
- return load >> FSHIFT;
-}
-
-#ifdef CONFIG_NO_HZ_COMMON
-/*
- * Handle NO_HZ for the global load-average.
- *
- * Since the above described distributed algorithm to compute the global
- * load-average relies on per-cpu sampling from the tick, it is affected by
- * NO_HZ.
- *
- * The basic idea is to fold the nr_active delta into a global idle-delta upon
- * entering NO_HZ state such that we can include this as an 'extra' cpu delta
- * when we read the global state.
- *
- * Obviously reality has to ruin such a delightfully simple scheme:
- *
- * - When we go NO_HZ idle during the window, we can negate our sample
- * contribution, causing under-accounting.
- *
- * We avoid this by keeping two idle-delta counters and flipping them
- * when the window starts, thus separating old and new NO_HZ load.
- *
- * The only trick is the slight shift in index flip for read vs write.
- *
- * 0s 5s 10s 15s
- * +10 +10 +10 +10
- * |-|-----------|-|-----------|-|-----------|-|
- * r:0 0 1 1 0 0 1 1 0
- * w:0 1 1 0 0 1 1 0 0
- *
- * This ensures we'll fold the old idle contribution in this window while
- * accumlating the new one.
- *
- * - When we wake up from NO_HZ idle during the window, we push up our
- * contribution, since we effectively move our sample point to a known
- * busy state.
- *
- * This is solved by pushing the window forward, and thus skipping the
- * sample, for this cpu (effectively using the idle-delta for this cpu which
- * was in effect at the time the window opened). This also solves the issue
- * of having to deal with a cpu having been in NOHZ idle for multiple
- * LOAD_FREQ intervals.
- *
- * When making the ILB scale, we should try to pull this in as well.
- */
-static atomic_long_t calc_load_idle[2];
-static int calc_load_idx;
-
-static inline int calc_load_write_idx(void)
-{
- int idx = calc_load_idx;
-
- /*
- * See calc_global_nohz(), if we observe the new index, we also
- * need to observe the new update time.
- */
- smp_rmb();
-
- /*
- * If the folding window started, make sure we start writing in the
- * next idle-delta.
- */
- if (!time_before(jiffies, calc_load_update))
- idx++;
-
- return idx & 1;
-}
-
-static inline int calc_load_read_idx(void)
-{
- return calc_load_idx & 1;
-}
-
-void calc_load_enter_idle(void)
-{
- struct rq *this_rq = this_rq();
- long delta;
-
- /*
- * We're going into NOHZ mode, if there's any pending delta, fold it
- * into the pending idle delta.
- */
- delta = calc_load_fold_active(this_rq);
- if (delta) {
- int idx = calc_load_write_idx();
- atomic_long_add(delta, &calc_load_idle[idx]);
- }
-}
-
-void calc_load_exit_idle(void)
-{
- struct rq *this_rq = this_rq();
-
- /*
- * If we're still before the sample window, we're done.
- */
- if (time_before(jiffies, this_rq->calc_load_update))
- return;
-
- /*
- * We woke inside or after the sample window, this means we're already
- * accounted through the nohz accounting, so skip the entire deal and
- * sync up for the next window.
- */
- this_rq->calc_load_update = calc_load_update;
- if (time_before(jiffies, this_rq->calc_load_update + 10))
- this_rq->calc_load_update += LOAD_FREQ;
-}
-
-static long calc_load_fold_idle(void)
-{
- int idx = calc_load_read_idx();
- long delta = 0;
-
- if (atomic_long_read(&calc_load_idle[idx]))
- delta = atomic_long_xchg(&calc_load_idle[idx], 0);
-
- return delta;
-}
-
-/**
- * fixed_power_int - compute: x^n, in O(log n) time
- *
- * @x: base of the power
- * @frac_bits: fractional bits of @x
- * @n: power to raise @x to.
- *
- * By exploiting the relation between the definition of the natural power
- * function: x^n := x*x*...*x (x multiplied by itself for n times), and
- * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
- * (where: n_i \elem {0, 1}, the binary vector representing n),
- * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
- * of course trivially computable in O(log_2 n), the length of our binary
- * vector.
- */
-static unsigned long
-fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
-{
- unsigned long result = 1UL << frac_bits;
-
- if (n) for (;;) {
- if (n & 1) {
- result *= x;
- result += 1UL << (frac_bits - 1);
- result >>= frac_bits;
- }
- n >>= 1;
- if (!n)
- break;
- x *= x;
- x += 1UL << (frac_bits - 1);
- x >>= frac_bits;
- }
-
- return result;
-}
-
-/*
- * a1 = a0 * e + a * (1 - e)
- *
- * a2 = a1 * e + a * (1 - e)
- * = (a0 * e + a * (1 - e)) * e + a * (1 - e)
- * = a0 * e^2 + a * (1 - e) * (1 + e)
- *
- * a3 = a2 * e + a * (1 - e)
- * = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
- * = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
- *
- * ...
- *
- * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
- * = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
- * = a0 * e^n + a * (1 - e^n)
- *
- * [1] application of the geometric series:
- *
- * n 1 - x^(n+1)
- * S_n := \Sum x^i = -------------
- * i=0 1 - x
- */
-static unsigned long
-calc_load_n(unsigned long load, unsigned long exp,
- unsigned long active, unsigned int n)
-{
-
- return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
-}
-
-/*
- * NO_HZ can leave us missing all per-cpu ticks calling
- * calc_load_account_active(), but since an idle CPU folds its delta into
- * calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
- * in the pending idle delta if our idle period crossed a load cycle boundary.
- *
- * Once we've updated the global active value, we need to apply the exponential
- * weights adjusted to the number of cycles missed.
- */
-static void calc_global_nohz(void)
-{
- long delta, active, n;
-
- if (!time_before(jiffies, calc_load_update + 10)) {
- /*
- * Catch-up, fold however many we are behind still
- */
- delta = jiffies - calc_load_update - 10;
- n = 1 + (delta / LOAD_FREQ);
-
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
-
- avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
- avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
- avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
-
- calc_load_update += n * LOAD_FREQ;
- }
-
- /*
- * Flip the idle index...
- *
- * Make sure we first write the new time then flip the index, so that
- * calc_load_write_idx() will see the new time when it reads the new
- * index, this avoids a double flip messing things up.
- */
- smp_wmb();
- calc_load_idx++;
-}
-#else /* !CONFIG_NO_HZ_COMMON */
-
-static inline long calc_load_fold_idle(void) { return 0; }
-static inline void calc_global_nohz(void) { }
-
-#endif /* CONFIG_NO_HZ_COMMON */
-
-/*
- * calc_load - update the avenrun load estimates 10 ticks after the
- * CPUs have updated calc_load_tasks.
- */
-void calc_global_load(unsigned long ticks)
-{
- long active, delta;
-
- if (time_before(jiffies, calc_load_update + 10))
- return;
-
- /*
- * Fold the 'old' idle-delta to include all NO_HZ cpus.
- */
- delta = calc_load_fold_idle();
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
-
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
-
- avenrun[0] = calc_load(avenrun[0], EXP_1, active);
- avenrun[1] = calc_load(avenrun[1], EXP_5, active);
- avenrun[2] = calc_load(avenrun[2], EXP_15, active);
-
- calc_load_update += LOAD_FREQ;
-
- /*
- * In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
- */
- calc_global_nohz();
-}
-
-/*
- * Called from update_cpu_load() to periodically update this CPU's
- * active count.
- */
-static void calc_load_account_active(struct rq *this_rq)
-{
- long delta;
-
- if (time_before(jiffies, this_rq->calc_load_update))
- return;
-
- delta = calc_load_fold_active(this_rq);
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
-
- this_rq->calc_load_update += LOAD_FREQ;
-}
-
-/*
- * End of global load-average stuff
- */
-
-/*
- * The exact cpuload at various idx values, calculated at every tick would be
- * load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
- *
- * If a cpu misses updates for n-1 ticks (as it was idle) and update gets called
- * on nth tick when cpu may be busy, then we have:
- * load = ((2^idx - 1) / 2^idx)^(n-1) * load
- * load = (2^idx - 1) / 2^idx) * load + 1 / 2^idx * cur_load
- *
- * decay_load_missed() below does efficient calculation of
- * load = ((2^idx - 1) / 2^idx)^(n-1) * load
- * avoiding 0..n-1 loop doing load = ((2^idx - 1) / 2^idx) * load
- *
- * The calculation is approximated on a 128 point scale.
- * degrade_zero_ticks is the number of ticks after which load at any
- * particular idx is approximated to be zero.
- * degrade_factor is a precomputed table, a row for each load idx.
- * Each column corresponds to degradation factor for a power of two ticks,
- * based on 128 point scale.
- * Example:
- * row 2, col 3 (=12) says that the degradation at load idx 2 after
- * 8 ticks is 12/128 (which is an approximation of exact factor 3^8/4^8).
- *
- * With this power of 2 load factors, we can degrade the load n times
- * by looking at 1 bits in n and doing as many mult/shift instead of
- * n mult/shifts needed by the exact degradation.
- */
-#define DEGRADE_SHIFT 7
-static const unsigned char
- degrade_zero_ticks[CPU_LOAD_IDX_MAX] = {0, 8, 32, 64, 128};
-static const unsigned char
- degrade_factor[CPU_LOAD_IDX_MAX][DEGRADE_SHIFT + 1] = {
- {0, 0, 0, 0, 0, 0, 0, 0},
- {64, 32, 8, 0, 0, 0, 0, 0},
- {96, 72, 40, 12, 1, 0, 0},
- {112, 98, 75, 43, 15, 1, 0},
- {120, 112, 98, 76, 45, 16, 2} };
-
-/*
- * Update cpu_load for any missed ticks, due to tickless idle. The backlog
- * would be when CPU is idle and so we just decay the old load without
- * adding any new load.
- */
-static unsigned long
-decay_load_missed(unsigned long load, unsigned long missed_updates, int idx)
-{
- int j = 0;
-
- if (!missed_updates)
- return load;
-
- if (missed_updates >= degrade_zero_ticks[idx])
- return 0;
-
- if (idx == 1)
- return load >> missed_updates;
-
- while (missed_updates) {
- if (missed_updates % 2)
- load = (load * degrade_factor[idx][j]) >> DEGRADE_SHIFT;
-
- missed_updates >>= 1;
- j++;
- }
- return load;
-}
-
-/*
- * Update rq->cpu_load[] statistics. This function is usually called every
- * scheduler tick (TICK_NSEC). With tickless idle this will not be called
- * every tick. We fix it up based on jiffies.
- */
-static void __update_cpu_load(struct rq *this_rq, unsigned long this_load,
- unsigned long pending_updates)
-{
- int i, scale;
-
- this_rq->nr_load_updates++;
-
- /* Update our load: */
- this_rq->cpu_load[0] = this_load; /* Fasttrack for idx 0 */
- for (i = 1, scale = 2; i < CPU_LOAD_IDX_MAX; i++, scale += scale) {
- unsigned long old_load, new_load;
-
- /* scale is effectively 1 << i now, and >> i divides by scale */
-
- old_load = this_rq->cpu_load[i];
- old_load = decay_load_missed(old_load, pending_updates - 1, i);
- new_load = this_load;
- /*
- * Round up the averaging division if load is increasing. This
- * prevents us from getting stuck on 9 if the load is 10, for
- * example.
- */
- if (new_load > old_load)
- new_load += scale - 1;
-
- this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i;
- }
-
- sched_avg_update(this_rq);
-}
-
-#ifdef CONFIG_NO_HZ_COMMON
-/*
- * There is no sane way to deal with nohz on smp when using jiffies because the
- * cpu doing the jiffies update might drift wrt the cpu doing the jiffy reading
- * causing off-by-one errors in observed deltas; {0,2} instead of {1,1}.
- *
- * Therefore we cannot use the delta approach from the regular tick since that
- * would seriously skew the load calculation. However we'll make do for those
- * updates happening while idle (nohz_idle_balance) or coming out of idle
- * (tick_nohz_idle_exit).
- *
- * This means we might still be one tick off for nohz periods.
- */
-
-/*
- * Called from nohz_idle_balance() to update the load ratings before doing the
- * idle balance.
- */
-void update_idle_cpu_load(struct rq *this_rq)
-{
- unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
- unsigned long load = this_rq->load.weight;
- unsigned long pending_updates;
-
- /*
- * bail if there's load or we're actually up-to-date.
- */
- if (load || curr_jiffies == this_rq->last_load_update_tick)
- return;
-
- pending_updates = curr_jiffies - this_rq->last_load_update_tick;
- this_rq->last_load_update_tick = curr_jiffies;
-
- __update_cpu_load(this_rq, load, pending_updates);
-}
-
-/*
- * Called from tick_nohz_idle_exit() -- try and fix up the ticks we missed.
- */
-void update_cpu_load_nohz(void)
-{
- struct rq *this_rq = this_rq();
- unsigned long curr_jiffies = ACCESS_ONCE(jiffies);
- unsigned long pending_updates;
-
- if (curr_jiffies == this_rq->last_load_update_tick)
- return;
-
- raw_spin_lock(&this_rq->lock);
- pending_updates = curr_jiffies - this_rq->last_load_update_tick;
- if (pending_updates) {
- this_rq->last_load_update_tick = curr_jiffies;
- /*
- * We were idle, this means load 0, the current load might be
- * !0 due to remote wakeups and the sort.
- */
- __update_cpu_load(this_rq, 0, pending_updates);
- }
- raw_spin_unlock(&this_rq->lock);
-}
-#endif /* CONFIG_NO_HZ_COMMON */
-
-/*
- * Called from scheduler_tick()
- */
-static void update_cpu_load_active(struct rq *this_rq)
-{
- /*
- * See the mess around update_idle_cpu_load() / update_cpu_load_nohz().
- */
- this_rq->last_load_update_tick = jiffies;
- __update_cpu_load(this_rq, this_rq->load.weight, 1);
-
- calc_load_account_active(this_rq);
-}
-
#ifdef CONFIG_SMP
/*
if (task_current(rq, p)) {
update_rq_clock(rq);
- ns = rq->clock_task - p->se.exec_start;
+ ns = rq_clock_task(rq) - p->se.exec_start;
if ((s64)ns < 0)
ns = 0;
}
*/
rq->stop = NULL;
+ /*
+ * put_prev_task() and pick_next_task() sched
+ * class method both need to have an up-to-date
+ * value of rq->clock[_task]
+ */
+ update_rq_clock(rq);
+
for ( ; ; ) {
/*
* There's this thread running, bail when that's the only
hotcpu_notifier(cpuset_cpu_active, CPU_PRI_CPUSET_ACTIVE);
hotcpu_notifier(cpuset_cpu_inactive, CPU_PRI_CPUSET_INACTIVE);
- /* RT runtime code needs to handle some hotplug events */
- hotcpu_notifier(update_runtime, 0);
-
init_hrtick();
/* Move init over to a non-isolated CPU */
projects / ~andy / linux / commitdiff