V4L/DVB: IR/mceusb: kill pinnacle-device-specific nonsense

I have pinnacle hardware now. None of this pinnacle-specific crap is at
all necessary (in fact, some of it needed to be removed to actually make
it work). The only thing unique about this device is that it often
transfers inbound data w/a header of 0x90, meaning 16 bytes of IR data
following it, so I had to make adjustments for that, and now its working
perfectly fine.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c
index 756f7186edb848f3190bb10ce640d1ca27239937..708a71a384431402adefedc1cd2dfe4a409cd155 100644 (file)
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/IR/mceusb.c
@@ -68,7 +68,7 @@
 #define MCE_PULSE_BIT  0x80 /* Pulse bit, MSB set == PULSE else SPACE */
 #define MCE_PULSE_MASK 0x7F /* Pulse mask */
 #define MCE_MAX_PULSE_LENGTH 0x7F /* Longest transmittable pulse symbol */
-#define MCE_PACKET_LENGTH_MASK  0xF /* Packet length mask */
+#define MCE_PACKET_LENGTH_MASK  0x1F /* Packet length mask */
 
 
 /* module parameters */
@@ -209,11 +209,6 @@ static struct usb_device_id gen3_list[] = {
        {}
 };
 
-static struct usb_device_id pinnacle_list[] = {
-       { USB_DEVICE(VENDOR_PINNACLE, 0x0225) },
-       {}
-};
-
 static struct usb_device_id microsoft_gen1_list[] = {
        { USB_DEVICE(VENDOR_MICROSOFT, 0x006d) },
        {}
@@ -542,6 +537,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 {
        struct ir_raw_event rawir = { .pulse = false, .duration = 0 };
        int i, start_index = 0;
+       u8 hdr = MCE_CONTROL_HEADER;
 
        /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
        if (ir->flags.microsoft_gen1)
@@ -551,15 +547,16 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
                if (ir->rem == 0) {
                        /* decode mce packets of the form (84),AA,BB,CC,DD */
                        /* IR data packets can span USB messages - rem */
-                       ir->rem = (ir->buf_in[i] & MCE_PACKET_LENGTH_MASK);
-                       ir->cmd = (ir->buf_in[i] & ~MCE_PACKET_LENGTH_MASK);
+                       hdr = ir->buf_in[i];
+                       ir->rem = (hdr & MCE_PACKET_LENGTH_MASK);
+                       ir->cmd = (hdr & ~MCE_PACKET_LENGTH_MASK);
                        dev_dbg(ir->dev, "New data. rem: 0x%02x, cmd: 0x%02x\n",
                                ir->rem, ir->cmd);
                        i++;
                }
 
-               /* Only cmd 0x8<bytes> is IR data, don't process MCE commands */
-               if (ir->cmd != 0x80) {
+               /* don't process MCE commands */
+               if (hdr == MCE_CONTROL_HEADER || hdr == 0xff) {
                        ir->rem = 0;
                        return;
                }
@@ -841,12 +838,10 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
        struct usb_endpoint_descriptor *ep_out = NULL;
        struct usb_host_config *config;
        struct mceusb_dev *ir = NULL;
-       int pipe, maxp;
-       int i, ret;
+       int pipe, maxp, i;
        char buf[63], name[128] = "";
        bool is_gen3;
        bool is_microsoft_gen1;
-       bool is_pinnacle;
        bool tx_mask_inverted;
 
        dev_dbg(&intf->dev, ": %s called\n", __func__);
@@ -858,7 +853,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 
        is_gen3 = usb_match_id(intf, gen3_list) ? 1 : 0;
        is_microsoft_gen1 = usb_match_id(intf, microsoft_gen1_list) ? 1 : 0;
-       is_pinnacle = usb_match_id(intf, pinnacle_list) ? 1 : 0;
        tx_mask_inverted = usb_match_id(intf, std_tx_mask_list) ? 0 : 1;
 
        /* step through the endpoints to find first bulk in and out endpoint */
@@ -873,19 +867,11 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
                        || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
                            == USB_ENDPOINT_XFER_INT))) {
 
-                       dev_dbg(&intf->dev, ": acceptable inbound endpoint "
-                               "found\n");
                        ep_in = ep;
                        ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
-                       if (!is_pinnacle)
-                               /*
-                                * Ideally, we'd use what the device offers up,
-                                * but that leads to non-functioning first and
-                                * second-gen devices, and many devices have an
-                                * invalid bInterval of 0. Pinnacle devices
-                                * don't work witha  bInterval of 1 though.
-                                */
-                               ep_in->bInterval = 1;
+                       ep_in->bInterval = 1;
+                       dev_dbg(&intf->dev, ": acceptable inbound endpoint "
+                               "found\n");
                }
 
                if ((ep_out == NULL)
@@ -896,19 +882,11 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
                        || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
                            == USB_ENDPOINT_XFER_INT))) {
 
-                       dev_dbg(&intf->dev, ": acceptable outbound endpoint "
-                               "found\n");
                        ep_out = ep;
                        ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
-                       if (!is_pinnacle)
-                               /*
-                                * Ideally, we'd use what the device offers up,
-                                * but that leads to non-functioning first and
-                                * second-gen devices, and many devices have an
-                                * invalid bInterval of 0. Pinnacle devices
-                                * don't work witha  bInterval of 1 though.
-                                */
-                               ep_out->bInterval = 1;
+                       ep_out->bInterval = 1;
+                       dev_dbg(&intf->dev, ": acceptable outbound endpoint "
+                               "found\n");
                }
        }
        if (ep_in == NULL) {
@@ -962,19 +940,6 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
        ir->urb_in->transfer_dma = ir->dma_in;
        ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
-       if (is_pinnacle) {
-               /*
-                * I have no idea why but this reset seems to be crucial to
-                * getting the device to do outbound IO correctly - without
-                * this the device seems to hang, ignoring all input - although
-                * IR signals are correctly sent from the device, no input is
-                * interpreted by the device and the host never does the
-                * completion routine
-                */
-               ret = usb_reset_configuration(dev);
-               dev_info(&intf->dev, "usb reset config ret %x\n", ret);
-       }
-
        /* initialize device */
        if (ir->flags.gen3)
                mceusb_gen3_init(ir);