PCI: Workaround missing pci_set_master in pci drivers

Ben Herrenschmidt found that commit 928bea964827 ("PCI: Delay enabling
bridges until they're needed") breaks PCI in some powerpc environments.

The reason is that the PCIe port driver will call pci_enable_device() on
the bridge, so the device is enabled, but skips pci_set_master because
pcie_port_auto and no acpi on powerpc.

Because of that, pci_enable_bridge() later on (called as a result of the
child device driver doing pci_enable_device) will see the bridge as
already enabled and will not call pci_set_master() on it.

Fixed by add checking in pci_enable_bridge, and call pci_set_master
if driver skip that.

That will make the code more robot and wade off problem for missing
pci_set_master in drivers.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 36cc8d5ae8b2047de37753b88dca62f6d73e1c17..7a92d81c28e03e0582dc8068814434a49fbdbe04 100644 (file)
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1155,8 +1155,14 @@ static void pci_enable_bridge(struct pci_dev *dev)
 
        pci_enable_bridge(dev->bus->self);
 
-       if (pci_is_enabled(dev))
+       if (pci_is_enabled(dev)) {
+               if (!dev->is_busmaster) {
+                       dev_warn(&dev->dev, "driver skip pci_set_master, fix it!\n");
+                       pci_set_master(dev);
+               }
                return;
+       }
+
        retval = pci_enable_device(dev);
        if (retval)
                dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n",