#include <linux/io.h>
#include <linux/irq.h>
#include <linux/mfd/tmio.h>
+#include <linux/mmc/cd-gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/tmio.h>
#include <linux/module.h>
spin_unlock_irqrestore(&host->lock, flags);
/*
- * pdata->power == false only if COLD_CD is available, otherwise only
- * in short time intervals during probing or resuming
+ * pdata->power toggles between false and true in both cases - either
+ * or not the controller can be runtime-suspended during inactivity.
+ * But if the controller has to be kept on, the runtime-pm usage_count
+ * is kept positive, so no suspending actually takes place.
*/
if (ios->power_mode == MMC_POWER_ON && ios->clock) {
if (!pdata->power) {
else
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- _host->native_hotplug = !(pdata->flags & TMIO_MMC_HAS_COLD_CD ||
+ _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
mmc->caps & MMC_CAP_NONREMOVABLE);
* 3) a worker thread polls the sdhi - indicated by MMC_CAP_NEEDS_POLL
* 4) the medium is non-removable - indicated by MMC_CAP_NONREMOVABLE
*
- * While we increment the rtpm counter for all scenarios when the mmc
- * core activates us by calling an appropriate set_ios(), we must
+ * While we increment the runtime PM counter for all scenarios when
+ * the mmc core activates us by calling an appropriate set_ios(), we
+ * must additionally ensure that in case 2) the tmio mmc hardware stays
* additionally ensure that in case 2) the tmio mmc hardware stays
* powered on during runtime for the card detection to work.
*/
tmio_mmc_enable_mmc_irqs(_host, irq_mask);
+ if (pdata->flags & TMIO_MMC_USE_GPIO_CD) {
+ ret = mmc_cd_gpio_request(mmc, pdata->cd_gpio);
+ if (ret < 0) {
+ tmio_mmc_host_remove(_host);
+ return ret;
+ }
+ }
+
*host = _host;
return 0;
void tmio_mmc_host_remove(struct tmio_mmc_host *host)
{
struct platform_device *pdev = host->pdev;
+ struct tmio_mmc_data *pdata = host->pdata;
+ struct mmc_host *mmc = host->mmc;
+
+ if (pdata->flags & TMIO_MMC_USE_GPIO_CD)
+ /*
+ * This means we can miss a card-eject, but this is anyway
+ * possible, because of delayed processing of hotplug events.
+ */
+ mmc_cd_gpio_free(mmc);
- /*
- * We don't have to manipulate pdata->power here: if there is a card in
- * the slot, the runtime PM is active and our .runtime_resume() will not
- * be run. If there is no card in the slot and the platform can suspend
- * the controller, the runtime PM is suspended and pdata->power == false,
- * so, our .runtime_resume() will not try to detect a card in the slot.
- */
if (!host->native_hotplug)
pm_runtime_get_sync(&pdev->dev);
dev_pm_qos_hide_latency_limit(&pdev->dev);
- mmc_remove_host(host->mmc);
+ mmc_remove_host(mmc);
cancel_work_sync(&host->done);
cancel_delayed_work_sync(&host->delayed_reset_work);
tmio_mmc_release_dma(host);
pm_runtime_disable(&pdev->dev);
iounmap(host->ctl);
- mmc_free_host(host->mmc);
+ mmc_free_host(mmc);
}
EXPORT_SYMBOL(tmio_mmc_host_remove);
if (!ret)
tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);
- host->pm_error = pm_runtime_put_sync(dev);
-
return ret;
}
EXPORT_SYMBOL(tmio_mmc_host_suspend);
struct mmc_host *mmc = dev_get_drvdata(dev);
struct tmio_mmc_host *host = mmc_priv(mmc);
- /* The MMC core will perform the complete set up */
- host->pdata->power = false;
-
- host->pm_global = true;
- if (!host->pm_error)
- pm_runtime_get_sync(dev);
-
- if (host->pm_global) {
- /* Runtime PM resume callback didn't run */
- tmio_mmc_reset(host);
- tmio_mmc_enable_dma(host, true);
- host->pm_global = false;
- }
+ tmio_mmc_reset(host);
+ tmio_mmc_enable_dma(host, true);
+ /* The MMC core will perform the complete set up */
return mmc_resume_host(mmc);
}
EXPORT_SYMBOL(tmio_mmc_host_resume);
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct tmio_mmc_host *host = mmc_priv(mmc);
- struct tmio_mmc_data *pdata = host->pdata;
tmio_mmc_reset(host);
tmio_mmc_enable_dma(host, true);
- if (pdata->power) {
- /* Only entered after a card-insert interrupt */
- if (!mmc->card)
- tmio_mmc_set_ios(mmc, &mmc->ios);
- mmc_detect_change(mmc, msecs_to_jiffies(100));
- }
- host->pm_global = false;
-
return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
#ifndef MFD_TMIO_H
#define MFD_TMIO_H
+#include <linux/device.h>
#include <linux/fb.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#define TMIO_MMC_SDIO_IRQ (1 << 2)
/*
* Some platforms can detect card insertion events with controller powered
- * down, in which case they have to call tmio_mmc_cd_wakeup() to power up the
- * controller and report the event to the driver.
+ * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio,
+ * and cd_flags fields of struct tmio_mmc_data.
*/
#define TMIO_MMC_HAS_COLD_CD (1 << 3)
/*
* idle before writing to some registers.
*/
#define TMIO_MMC_HAS_IDLE_WAIT (1 << 4)
+/*
+ * A GPIO is used for card hotplug detection. We need an extra flag for this,
+ * because 0 is a valid GPIO number too, and requiring users to specify
+ * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
+ */
+#define TMIO_MMC_USE_GPIO_CD (1 << 5)
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
struct tmio_mmc_dma *dma;
struct device *dev;
bool power;
+ unsigned int cd_gpio;
void (*set_pwr)(struct platform_device *host, int state);
void (*set_clk_div)(struct platform_device *host, int state);
int (*get_cd)(struct platform_device *host);
int (*write16_hook)(struct tmio_mmc_host *host, int addr);
};
+/*
+ * This function is deprecated and will be removed soon. Please, convert your
+ * platform to use drivers/mmc/core/cd-gpio.c
+ */
+#include <linux/mmc/host.h>
static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
{
- if (pdata && !pdata->power) {
- pdata->power = true;
- pm_runtime_get(pdata->dev);
- }
+ if (pdata)
+ mmc_detect_change(dev_get_drvdata(pdata->dev),
+ msecs_to_jiffies(100));
}
/*
projects / ~andy / linux / commitdiff