module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
MODULE_AUTHOR("Nick Kossifidis");
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
int ret, ani_mode;
+ bool fast;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
ath5k_drain_tx_buffs(sc);
if (chan)
sc->curchan = chan;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+ fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
/* Non fatal, can happen eg.
* on mode change */
ret = 0;
- } else
+ } else {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "fast chan change successful\n");
return 0;
+ }
}
/*
return 0;
}
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwl_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_sync(priv, &hcmd);
-}
-
static struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
- .set_channel_switch = iwl2030_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_chswitch_done(priv, false);
}
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
* at this point, staging_rxon has the
* configuration for channel switch
*/
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
#ifdef CONFIG_IWLWIFI_DEBUG
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
static inline int iwl_is_ready(struct iwl_priv *priv)
#endif
};
-/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
struct {
u32 error_event_table;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, false);
- }
+ iwl_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_chswitch_done(priv, false);
}
}
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
else
card->rx_unit = 0;
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
/*
* Enable interrupts now that everything is set up
*/
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
- /* Additional always once-executed workarounds */
- ssb_pcicore_serdes_workaround(pc);
- /* TODO: ASPM */
- /* TODO: Clock Request Update */
+ /* Additional PCIe always once-executed workarounds */
+ if (dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+ ret = dev_alloc_name(ndev, ndev->name);
+ if (ret < 0)
+ goto fail;
+
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
projects / ~andy / linux / commitdiff