--- /dev/null
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+ model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+ compatible = "ti,omap3-ldp", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins>;
+
+ key_enter {
+ label = "enter";
+ gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+ linux,code = <0x0107001c>; /* KEY_ENTER */
+ gpio-key,wakeup;
+ };
+
+ key_f1 {
+ label = "f1";
+ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+ linux,code = <0x0303003b>; /* KEY_F1 */
+ gpio-key,wakeup;
+ };
+
+ key_f2 {
+ label = "f2";
+ gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+ linux,code = <0x0403003c>; /* KEY_F2 */
+ gpio-key,wakeup;
+ };
+
+ key_f3 {
+ label = "f3";
+ gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+ linux,code = <0x0503003d>; /* KEY_F3 */
+ gpio-key,wakeup;
+ };
+
+ key_f4 {
+ label = "f4";
+ gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+ linux,code = <0x0704003e>; /* KEY_F4 */
+ gpio-key,wakeup;
+ };
+
+ key_left {
+ label = "left";
+ gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+ linux,code = <0x04070069>; /* KEY_LEFT */
+ gpio-key,wakeup;
+ };
+
+ key_right {
+ label = "right";
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+ linux,code = <0x0507006a>; /* KEY_RIGHT */
+ gpio-key,wakeup;
+ };
+
+ key_up {
+ label = "up";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+ linux,code = <0x06070067>; /* KEY_UP */
+ gpio-key,wakeup;
+ };
+
+ key_down {
+ label = "down";
+ gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+ linux,code = <0x0707006c>; /* KEY_DOWN */
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x01000000>,
+ <1 0 0x08000000 0x01000000>;
+
+ nand@0,0 {
+ linux,mtd-name= "micron,nand";
+ reg = <0 0 0>;
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x140000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x1c0000 0x40000>;
+ };
+ partition@200000 {
+ label = "Kernel";
+ reg = <0x200000 0x1e00000>;
+ };
+ partition@2000000 {
+ label = "Filesystem";
+ reg = <0x2000000 0xe000000>;
+ };
+ };
+
+ ethernet@gpmc {
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ reg = <1 0 0xff>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: pinmux_gpio_key_pins {
+ pinctrl-single,pins = <
+ 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
+ 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
+ 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
+ 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
+ 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
+ 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
+ 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
+ 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
+ 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ >;
+ };
+
+ musb_pins: pinmux_musb_pins {
+ pinctrl-single,pins = <
+ 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ >;
+ };
+};
+
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&musb_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux1 {
+ /* Needed for ads7846 */
+ regulator-name = "vcc";
+};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
projects / ~andy / linux / commitdiff