};
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
-/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
-static unsigned short saa711x_addrs[] = {
- 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
- 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
- I2C_CLIENT_END };
-
-static unsigned short tvp5150_addrs[] = {
- 0xb8 >> 1,
- 0xba >> 1,
- I2C_CLIENT_END
-};
-
-static unsigned short msp3400_addrs[] = {
- 0x80 >> 1,
- 0x88 >> 1,
- I2C_CLIENT_END
-};
-
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
{
struct em28xx_i2c_bus *i2c_bus = ptr;
/* Allow override tuner type by a module parameter */
if (tuner >= 0)
dev->tuner_type = tuner;
-
- /* request some modules */
- if (dev->board.has_msp34xx)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "msp3400", 0, msp3400_addrs);
-
- if (dev->board.decoder == EM28XX_SAA711X)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "saa7115_auto", 0, saa711x_addrs);
-
- if (dev->board.decoder == EM28XX_TVP5150)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "tvp5150", 0, tvp5150_addrs);
-
- if (dev->board.adecoder == EM28XX_TVAUDIO)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "tvaudio", dev->board.tvaudio_addr, NULL);
-
- if (dev->board.tuner_type != TUNER_ABSENT) {
- int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
-
- if (dev->board.radio.type)
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "tuner", dev->board.radio_addr, NULL);
-
- if (has_demod)
- v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus], "tuner",
- 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
- if (dev->tuner_addr == 0) {
- enum v4l2_i2c_tuner_type type =
- has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
- struct v4l2_subdev *sd;
-
- sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus], "tuner",
- 0, v4l2_i2c_tuner_addrs(type));
-
- if (sd)
- dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
- } else {
- v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
- "tuner", dev->tuner_addr, NULL);
- }
- }
-
- em28xx_tuner_setup(dev);
-
- em28xx_init_camera(dev);
}
-
static void request_module_async(struct work_struct *work)
{
struct em28xx *dev = container_of(work,
struct usb_interface *interface,
int minor)
{
- struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
int retval;
static const char *default_chip_name = "em28xx";
const char *chip_name = default_chip_name;
}
}
- retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
- if (retval < 0) {
- em28xx_errdev("Call to v4l2_device_register() failed!\n");
- return retval;
- }
-
- v4l2_ctrl_handler_init(hdl, 8);
- dev->v4l2_dev.ctrl_handler = hdl;
-
rt_mutex_init(&dev->i2c_bus_lock);
/* register i2c bus 0 */
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
__func__, retval);
- goto unregister_dev;
+ return retval;
}
/* register i2c bus 1 */
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
__func__, retval);
- goto unregister_dev;
+ return retval;
}
}
- /*
- * Default format, used for tvp5150 or saa711x output formats
- */
- dev->vinmode = 0x10;
- dev->vinctl = EM28XX_VINCTRL_INTERLACED |
- EM28XX_VINCTRL_CCIR656_ENABLE;
-
/* Do board specific init and eeprom reading */
em28xx_card_setup(dev);
- /* Configure audio */
- retval = em28xx_audio_setup(dev);
- if (retval < 0) {
- em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
- __func__, retval);
- goto fail;
- }
- if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
- v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
- v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
- } else {
- /* install the em28xx notify callback */
- v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
- em28xx_ctrl_notify, dev);
- v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
- em28xx_ctrl_notify, dev);
- }
-
- /* wake i2c devices */
- em28xx_wake_i2c(dev);
-
- /* init video dma queues */
- INIT_LIST_HEAD(&dev->vidq.active);
- INIT_LIST_HEAD(&dev->vbiq.active);
-
- if (dev->board.has_msp34xx) {
- /* Send a reset to other chips via gpio */
- retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
- if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_reg - "
- "msp34xx(1) failed! error [%d]\n",
- __func__, retval);
- goto fail;
- }
- msleep(3);
-
- retval = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
- if (retval < 0) {
- em28xx_errdev("%s: em28xx_write_reg - "
- "msp34xx(2) failed! error [%d]\n",
- __func__, retval);
- goto fail;
- }
- msleep(3);
- }
-
retval = em28xx_register_analog_devices(dev);
- if (retval < 0) {
+ if (retval < 0)
goto fail;
- }
-
- /* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
return 0;
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
- v4l2_ctrl_handler_free(&dev->ctrl_handler);
-
-unregister_dev:
- v4l2_device_unregister(&dev->v4l2_dev);
return retval;
}
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
- /* initialize videobuf2 stuff */
- em28xx_vb2_setup(dev);
-
/* allocate device struct */
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
.ioctl_ops = &radio_ioctl_ops,
};
+/* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
+static unsigned short saa711x_addrs[] = {
+ 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
+ 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
+ I2C_CLIENT_END };
+
+static unsigned short tvp5150_addrs[] = {
+ 0xb8 >> 1,
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
+static unsigned short msp3400_addrs[] = {
+ 0x80 >> 1,
+ 0x88 >> 1,
+ I2C_CLIENT_END
+};
+
/******************************** usb interface ******************************/
u8 val;
int ret;
unsigned int maxw;
+ struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+
+ if (dev->is_audio_only) {
+ /* This device does not support the v4l2 extension */
+ return 0;
+ }
printk(KERN_INFO "%s: v4l2 driver version %s\n",
dev->name, EM28XX_VERSION);
+ ret = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
+ if (ret < 0) {
+ em28xx_errdev("Call to v4l2_device_register() failed!\n");
+ goto err;
+ }
+
+ v4l2_ctrl_handler_init(hdl, 8);
+ dev->v4l2_dev.ctrl_handler = hdl;
+
+ /*
+ * Default format, used for tvp5150 or saa711x output formats
+ */
+ dev->vinmode = 0x10;
+ dev->vinctl = EM28XX_VINCTRL_INTERLACED |
+ EM28XX_VINCTRL_CCIR656_ENABLE;
+
+ /* request some modules */
+
+ if (dev->board.has_msp34xx)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "msp3400", 0, msp3400_addrs);
+
+ if (dev->board.decoder == EM28XX_SAA711X)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "saa7115_auto", 0, saa711x_addrs);
+
+ if (dev->board.decoder == EM28XX_TVP5150)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "tvp5150", 0, tvp5150_addrs);
+
+ if (dev->board.adecoder == EM28XX_TVAUDIO)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "tvaudio", dev->board.tvaudio_addr, NULL);
+
+ /* Initialize tuner and camera */
+
+ if (dev->board.tuner_type != TUNER_ABSENT) {
+ int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
+
+ if (dev->board.radio.type)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "tuner", dev->board.radio_addr, NULL);
+
+ if (has_demod)
+ v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ if (dev->tuner_addr == 0) {
+ enum v4l2_i2c_tuner_type type =
+ has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
+ struct v4l2_subdev *sd;
+
+ sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
+ 0, v4l2_i2c_tuner_addrs(type));
+
+ if (sd)
+ dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
+ } else {
+ v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap[dev->def_i2c_bus],
+ "tuner", dev->tuner_addr, NULL);
+ }
+ }
+
+ em28xx_tuner_setup(dev);
+ em28xx_init_camera(dev);
+
+ /* Configure audio */
+ ret = em28xx_audio_setup(dev);
+ if (ret < 0) {
+ em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
+ __func__, ret);
+ goto unregister_dev;
+ }
+ if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+ v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+ v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
+ V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
+ } else {
+ /* install the em28xx notify callback */
+ v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
+ em28xx_ctrl_notify, dev);
+ v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
+ em28xx_ctrl_notify, dev);
+ }
+
+ /* wake i2c devices */
+ em28xx_wake_i2c(dev);
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&dev->vidq.active);
+ INIT_LIST_HEAD(&dev->vbiq.active);
+
+ if (dev->board.has_msp34xx) {
+ /* Send a reset to other chips via gpio */
+ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
+ if (ret < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - msp34xx(1) failed! error [%d]\n",
+ __func__, ret);
+ goto unregister_dev;
+ }
+ msleep(3);
+
+ ret = em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
+ if (ret < 0) {
+ em28xx_errdev("%s: em28xx_write_reg - msp34xx(2) failed! error [%d]\n",
+ __func__, ret);
+ goto unregister_dev;
+ }
+ msleep(3);
+ }
+
/* set default norm */
dev->norm = V4L2_STD_PAL;
v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
/* Reset image controls */
em28xx_colorlevels_set_default(dev);
v4l2_ctrl_handler_setup(&dev->ctrl_handler);
- if (dev->ctrl_handler.error)
- return dev->ctrl_handler.error;
+ ret = dev->ctrl_handler.error;
+ if (ret)
+ goto unregister_dev;
/* allocate and fill video video_device struct */
dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
if (!dev->vdev) {
em28xx_errdev("cannot allocate video_device.\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto unregister_dev;
}
dev->vdev->queue = &dev->vb_vidq;
dev->vdev->queue->lock = &dev->vb_queue_lock;
if (ret) {
em28xx_errdev("unable to register video device (error=%i).\n",
ret);
- return ret;
+ goto unregister_dev;
}
/* Allocate and fill vbi video_device struct */
vbi_nr[dev->devno]);
if (ret < 0) {
em28xx_errdev("unable to register vbi device\n");
- return ret;
+ goto unregister_dev;
}
}
"radio");
if (!dev->radio_dev) {
em28xx_errdev("cannot allocate video_device.\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto unregister_dev;
}
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
em28xx_errdev("can't register radio device\n");
- return ret;
+ goto unregister_dev;
}
em28xx_info("Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
em28xx_info("V4L2 VBI device registered as %s\n",
video_device_node_name(dev->vbi_dev));
+ /* Save some power by putting tuner to sleep */
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
+
+ /* initialize videobuf2 stuff */
+ em28xx_vb2_setup(dev);
+
return 0;
+
+unregister_dev:
+ v4l2_ctrl_handler_free(&dev->ctrl_handler);
+ v4l2_device_unregister(&dev->v4l2_dev);
+err:
+ return ret;
}
projects / ~andy / linux / commitdiff