Driver rtlwifi fails on a big-endian host.
These changes have been tested on a Mac PowerBook G4, which has
a PPC processor.
Although this patch touches some of the code that will affect endian
issues on PCI hardware through drivers rtl8192ce, rtl8192se, and
rtl8192de, these have not been tested due to lack of suitable hardware.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
if (is_valid_ether_addr(rtlefuse->dev_addr)) {
SET_IEEE80211_PERM_ADDR(hw, rtlefuse->dev_addr);
} else {
- u8 rtlmac[] = { 0x00, 0xe0, 0x4c, 0x81, 0x92, 0x00 };
- get_random_bytes((rtlmac + (ETH_ALEN - 1)), 1);
- SET_IEEE80211_PERM_ADDR(hw, rtlmac);
+ u8 rtlmac1[] = { 0x00, 0xe0, 0x4c, 0x81, 0x92, 0x00 };
+ get_random_bytes((rtlmac1 + (ETH_ALEN - 1)), 1);
+ SET_IEEE80211_PERM_ADDR(hw, rtlmac1);
}
}
SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
#define SET_80211_PS_POLL_AID(_hdr, _val) \
- (*(u16 *)((u8 *)(_hdr) + 2) = le16_to_cpu(_val))
+ (*(u16 *)((u8 *)(_hdr) + 2) = _val)
#define SET_80211_PS_POLL_BSSID(_hdr, _val) \
memcpy(((u8 *)(_hdr)) + 4, (u8 *)(_val), ETH_ALEN)
#define SET_80211_PS_POLL_TA(_hdr, _val) \
u8 *bufferPtr = (u8 *) buffer;
u32 *pu4BytePtr = (u32 *) buffer;
u32 i, offset, blockCount, remainSize;
+ u32 data;
if (rtlpriv->io.writeN_sync) {
rtl_block_fw_writeN(hw, buffer, size);
}
blockCount = size / blockSize;
remainSize = size % blockSize;
+ if (remainSize) {
+ /* the last word is < 4 bytes - pad it with zeros */
+ for (i = 0; i < 4 - remainSize; i++)
+ *(bufferPtr + size + i) = 0;
+ blockCount++;
+ }
for (i = 0; i < blockCount; i++) {
offset = i * blockSize;
+ /* for big-endian platforms, the firmware data need to be byte
+ * swapped as it was read as a byte string and will be written
+ * as 32-bit dwords and byte swapped when written
+ */
+ data = le32_to_cpu(*(__le32 *)(pu4BytePtr + i));
rtl_write_dword(rtlpriv, (FW_8192C_START_ADDRESS + offset),
- *(pu4BytePtr + i));
- }
-
- if (remainSize) {
- offset = blockCount * blockSize;
- bufferPtr += offset;
- for (i = 0; i < remainSize; i++) {
- rtl_write_byte(rtlpriv, (FW_8192C_START_ADDRESS +
- offset + i), *(bufferPtr + i));
- }
+ data);
}
}
if (IS_FW_HEADER_EXIST(pfwheader)) {
RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
("Firmware Version(%d), Signature(%#x),Size(%d)\n",
- pfwheader->version, pfwheader->signature,
- (uint)sizeof(struct rtl92c_firmware_header)));
+ le16_to_cpu(pfwheader->version),
+ le16_to_cpu(pfwheader->signature),
+ (uint)sizeof(struct rtl92c_firmware_header)));
pfwdata = pfwdata + sizeof(struct rtl92c_firmware_header);
fwsize = fwsize - sizeof(struct rtl92c_firmware_header);
#define FW_8192C_POLLING_TIMEOUT_COUNT 100
#define IS_FW_HEADER_EXIST(_pfwhdr) \
- ((_pfwhdr->signature&0xFFF0) == 0x92C0 ||\
- (_pfwhdr->signature&0xFFF0) == 0x88C0)
+ ((le16_to_cpu(_pfwhdr->signature)&0xFFF0) == 0x92C0 ||\
+ (le16_to_cpu(_pfwhdr->signature)&0xFFF0) == 0x88C0)
struct rtl92c_firmware_header {
- u16 signature;
+ __le16 signature;
u8 category;
u8 function;
- u16 version;
+ __le16 version;
u8 subversion;
u8 rsvd1;
u8 month;
u8 date;
u8 hour;
u8 minute;
- u16 ramcodeSize;
- u16 rsvd2;
- u32 svnindex;
- u32 rsvd3;
- u32 rsvd4;
- u32 rsvd5;
+ __le16 ramcodeSize;
+ __le16 rsvd2;
+ __le32 svnindex;
+ __le32 rsvd3;
+ __le32 rsvd4;
+ __le32 rsvd5;
};
enum rtl8192c_h2c_cmd {
}
RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, ("MAP\n"),
hwinfo, HWSET_MAX_SIZE);
- eeprom_id = *((u16 *)&hwinfo[0]);
+ eeprom_id = le16_to_cpu(*((__le16 *)&hwinfo[0]));
if (eeprom_id != RTL8190_EEPROM_ID) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
_rtl92cu_read_txpower_info_from_hwpg(hw,
rtlefuse->autoload_failflag, hwinfo);
- rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
- rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
+ rtlefuse->eeprom_vid = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VID]);
+ rtlefuse->eeprom_did = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_DID]);
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
(" VID = 0x%02x PID = 0x%02x\n",
rtlefuse->eeprom_vid, rtlefuse->eeprom_did));
rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
- rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+ rtlefuse->eeprom_version =
+ le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VERSION]);
rtlefuse->txpwr_fromeprom = true;
rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, 0);
for (index = 0; index < 16; index++)
checksum = checksum ^ (*(ptr + index));
- SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, checksum);
+ SET_TX_DESC_TX_DESC_CHECKSUM(txdesc, cpu_to_le16(checksum));
}
void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw,
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(len);
+ /* data are already in little-endian order */
memcpy(buf, pdata, len);
usb_fill_control_urb(urb, udev, pipe,
(unsigned char *)dr, buf, len,
int status;
u8 reqtype;
int vendorreq_times = 0;
+ static int count;
pipe = usb_rcvctrlpipe(udev, 0); /* read_in */
reqtype = REALTEK_USB_VENQT_READ;
break;
}
}
- if (status < 0)
+ if (status < 0 && count++ < 4)
pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n",
- value, status, *(u32 *)pdata);
+ value, status, le32_to_cpu(*(u32 *)pdata));
return status;
}
wvalue = (u16)addr;
_usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len);
- ret = *data;
+ ret = le32_to_cpu(*data);
kfree(data);
return ret;
}
u8 request;
u16 wvalue;
u16 index;
- u32 data;
+ __le32 data;
request = REALTEK_USB_VENQT_CMD_REQ;
index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */
wvalue = (u16)(addr&0x0000ffff);
- data = val;
+ data = cpu_to_le32(val);
_usbctrl_vendorreq_async_write(udev, request, wvalue, index, &data,
len);
}
projects / ~andy / linux / commitdiff