* derived from this software without specific prior written
* permission.
- * This Software, including technical data, may be subject to U.S. export control
- * laws, including the U.S. Export Administration Act and its associated
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
- * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
+ * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
- * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
- * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION
+ * OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
/* Normal prefetch that use the pref instruction. */
#define CVMX_PREFETCH(address, offset) asm volatile ("pref %[type], %[off](%[rbase])" : : [rbase] "d" (address), [off] "I" (offset), [type] "n" (0))
-#define MAX_RETRIES 3 /* Maximum number of times to retry failed transactions */
-#define MAX_PIPES 32 /* Maximum number of pipes that can be open at once */
-#define MAX_TRANSACTIONS 256 /* Maximum number of outstanding transactions across all pipes */
-#define MAX_CHANNELS 8 /* Maximum number of hardware channels supported by the USB block */
-#define MAX_USB_ADDRESS 127 /* The highest valid USB device address */
-#define MAX_USB_ENDPOINT 15 /* The highest valid USB endpoint number */
-#define MAX_USB_HUB_PORT 15 /* The highest valid port number on a hub */
-#define MAX_TRANSFER_BYTES ((1<<19)-1) /* The low level hardware can transfer a maximum of this number of bytes in each transfer. The field is 19 bits wide */
-#define MAX_TRANSFER_PACKETS ((1<<10)-1) /* The low level hardware can transfer a maximum of this number of packets in each transfer. The field is 10 bits wide */
+/* Maximum number of times to retry failed transactions */
+#define MAX_RETRIES 3
+
+/* Maximum number of pipes that can be open at once */
+#define MAX_PIPES 32
+
+/* Maximum number of outstanding transactions across all pipes */
+#define MAX_TRANSACTIONS 256
+
+/* Maximum number of hardware channels supported by the USB block */
+#define MAX_CHANNELS 8
+
+/* The highest valid USB device address */
+#define MAX_USB_ADDRESS 127
+
+/* The highest valid USB endpoint number */
+#define MAX_USB_ENDPOINT 15
+
+/* The highest valid port number on a hub */
+#define MAX_USB_HUB_PORT 15
+
+/*
+ * The low level hardware can transfer a maximum of this number of bytes in each
+ * transfer. The field is 19 bits wide
+ */
+#define MAX_TRANSFER_BYTES ((1<<19)-1)
+
+/*
+ * The low level hardware can transfer a maximum of this number of packets in
+ * each transfer. The field is 10 bits wide
+ */
+#define MAX_TRANSFER_PACKETS ((1<<10)-1)
enum cvmx_usb_transaction_flags {
__CVMX_USB_TRANSACTION_FLAGS_IN_USE = 1<<16,
* Most Octeon evaluation boards require this setting
*/
if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
- usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_rclk = 1;
usbn_clk_ctl.cn31xx.p_xenbn = 0;
} else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
- usbn_clk_ctl.cn56xx.p_rtype = 2; /* From CN56XX,CN50XX manual */
+ /* From CN56XX,CN50XX manual */
+ usbn_clk_ctl.cn56xx.p_rtype = 2;
else
- usbn_clk_ctl.cn52xx.p_rtype = 1; /* From CN52XX manual */
+ /* From CN52XX manual */
+ usbn_clk_ctl.cn52xx.p_rtype = 1;
switch (flags & CVMX_USB_INITIALIZE_FLAGS_CLOCK_MHZ_MASK) {
case CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ:
* at USB_XO and USB_XI
*/
if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
- usbn_clk_ctl.cn31xx.p_rclk = 1; /* From CN31XX,CN30XX manual */
+ /* From CN31XX,CN30XX manual */
+ usbn_clk_ctl.cn31xx.p_rclk = 1;
usbn_clk_ctl.cn31xx.p_xenbn = 1;
} else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN50XX))
- usbn_clk_ctl.cn56xx.p_rtype = 0; /* From CN56XX,CN50XX manual */
+ /* From CN56XX,CN50XX manual */
+ usbn_clk_ctl.cn56xx.p_rtype = 0;
else
- usbn_clk_ctl.cn52xx.p_rtype = 0; /* From CN52XX manual */
+ /* From CN52XX manual */
+ usbn_clk_ctl.cn52xx.p_rtype = 0;
usbn_clk_ctl.s.p_c_sel = 0;
}
*/
{
int divisor = (octeon_get_clock_rate()+125000000-1)/125000000;
- if (divisor < 4) /* Lower than 4 doesn't seem to work properly */
+ /* Lower than 4 doesn't seem to work properly */
+ if (divisor < 4)
divisor = 4;
usbn_clk_ctl.s.divide = divisor;
usbn_clk_ctl.s.divide2 = 0;
usbcx_gahbcfg.u32 = 0;
usbcx_gahbcfg.s.dmaen = !(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA);
if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)
- usb->idle_hardware_channels = 0x1; /* Only use one channel with non DMA */
+ /* Only use one channel with non DMA */
+ usb->idle_hardware_channels = 0x1;
else if (OCTEON_IS_MODEL(OCTEON_CN5XXX))
- usb->idle_hardware_channels = 0xf7; /* CN5XXX have an errata with channel 3 */
+ /* CN5XXX have an errata with channel 3 */
+ usb->idle_hardware_channels = 0xf7;
else
usb->idle_hardware_channels = 0xff;
usbcx_gahbcfg.s.hbstlen = 0;
__cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTMSK(usb->index),
usbcx_gintmsk.u32);
- /* Disable all channel interrupts. We'll enable them per channel later */
+ /*
+ * Disable all channel interrupts. We'll enable them per channel
+ * later.
+ */
for (channel = 0; channel < 8; channel++)
__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCINTMSKX(channel, usb->index), 0);
}
prtena, ==, 1, 100000))
return -ETIMEDOUT;
- /* Read the port speed field to get the enumerated speed, USBC_HPRT[PRTSPD]. */
+ /*
+ * Read the port speed field to get the enumerated speed,
+ * USBC_HPRT[PRTSPD].
+ */
usb->usbcx_hprt.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HPRT(usb->index));
usbcx_ghwcfg3.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_GHWCFG3(usb->index));
if (usbc_hcsplt.s.spltena && usbc_hcsplt.s.compsplt)
return;
- /* Find out how many bytes we need to fill and convert it into 32bit words */
+ /*
+ * Find out how many bytes we need to fill and convert it into 32bit
+ * words.
+ */
usbc_hctsiz.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCTSIZX(channel, usb->index));
if (!usbc_hctsiz.s.xfersize)
return;
usbc_hcintmsk.u32 = 0;
usbc_hcintmsk.s.chhltdmsk = 1;
if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
- /* Channels need these extra interrupts when we aren't in DMA mode */
+ /*
+ * Channels need these extra interrupts when we aren't
+ * in DMA mode.
+ */
usbc_hcintmsk.s.datatglerrmsk = 1;
usbc_hcintmsk.s.frmovrunmsk = 1;
usbc_hcintmsk.s.bblerrmsk = 1;
usbc_hcintmsk.s.xacterrmsk = 1;
if (__cvmx_usb_pipe_needs_split(usb, pipe)) {
- /* Splits don't generate xfercompl, so we need ACK and NYET */
+ /*
+ * Splits don't generate xfercompl, so we need
+ * ACK and NYET.
+ */
usbc_hcintmsk.s.nyetmsk = 1;
usbc_hcintmsk.s.ackmsk = 1;
}
* begin or the entire payload
*/
if (bytes_to_transfer <= 188)
- usbc_hcsplt.s.xactpos = 3; /* Entire payload in one go */
+ /* Entire payload in one go */
+ usbc_hcsplt.s.xactpos = 3;
else
- usbc_hcsplt.s.xactpos = 2; /* First part of payload */
+ /* First part of payload */
+ usbc_hcsplt.s.xactpos = 2;
} else {
/*
* Continuing the previous data, we must
* either be in the middle or at the end
*/
if (bytes_to_transfer <= 188)
- usbc_hcsplt.s.xactpos = 1; /* End of payload */
+ /* End of payload */
+ usbc_hcsplt.s.xactpos = 1;
else
- usbc_hcsplt.s.xactpos = 0; /* Middle of payload */
+ /* Middle of payload */
+ usbc_hcsplt.s.xactpos = 0;
}
/*
* Again, the transfer size is limited to 188
enum cvmx_usb_transfer ttype;
if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) {
- /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */
+ /*
+ * Without DMA we need to be careful to not schedule something
+ * at the end of a frame and cause an overrun.
+ */
union cvmx_usbcx_hfnum hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))};
union cvmx_usbcx_hfir hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))};
if (hfnum.s.frrem < hfir.s.frint/4)
* next one
*/
if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) {
- transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */
- transaction->iso_number_packets--; /* One less ISO waiting to transfer */
- transaction->iso_packets++; /* Increment to the next location in our packet array */
+ /* No bytes transferred for this packet as of yet */
+ transaction->actual_bytes = 0;
+ /* One less ISO waiting to transfer */
+ transaction->iso_number_packets--;
+ /* Increment to the next location in our packet array */
+ transaction->iso_packets++;
transaction->stage = CVMX_USB_STAGE_NON_CONTROL;
goto done;
}
transaction->buffer = buffer;
transaction->buffer_length = buffer_length;
transaction->control_header = control_header;
- transaction->iso_start_frame = iso_start_frame; // FIXME: This is not used, implement it
+ /* FIXME: This is not used, implement it. */
+ transaction->iso_start_frame = iso_start_frame;
transaction->iso_number_packets = iso_number_packets;
transaction->iso_packets = iso_packets;
transaction->callback = callback;
* @pipe_handle:
* Pipe handle to cancel requests in.
* @submit_handle:
- * Handle to transaction to cancel, returned by the submit function.
+ * Handle to transaction to cancel, returned by the submit
+ * function.
*
* Returns: 0 or a negative error code.
*/
CVMX_SYNCW;
usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index));
- /* If the channel isn't enabled then the transaction already completed */
+ /*
+ * If the channel isn't enabled then the transaction already
+ * completed.
+ */
if (usbc_hcchar.s.chena) {
usbc_hcchar.s.chdis = 1;
__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32);
__cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32);
return 0;
} else if (usbc_hcint.s.xfercompl) {
- /* Successful IN/OUT with transfer complete. Channel halt isn't needed */
+ /*
+ * Successful IN/OUT with transfer complete.
+ * Channel halt isn't needed.
+ */
} else {
cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel);
return 0;
break;
}
} else if (usbc_hcint.s.nak) {
- /* If this was a split then clear our split in progress marker */
+ /*
+ * If this was a split then clear our split in progress marker.
+ */
if (usb->active_split == transaction)
usb->active_split = NULL;
/*
projects / ~andy / linux / commitdiff