hpt366: remove dead old timing tables

It has been enough time since introduction of the new timing tables
(commit 809b53c from Dec 12 2007) and the old timing tables are still
available in pata_hpt37x.c (or git history) if somebody needs them.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index e2f1e69c31c6044ebf83f0bcebfef403dce27cb4..4d90ac2dbb1be827aef1a633159ae835f701588d 100644 (file)
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@ static u32 twenty_five_base_hpt36x[] = {
        /* XFER_PIO_0 */        0xc0d08585
 };
 
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
-       /* XFER_UDMA_6 */       0x12446231,     /* 0x12646231 ?? */
-       /* XFER_UDMA_5 */       0x12446231,
-       /* XFER_UDMA_4 */       0x12446231,
-       /* XFER_UDMA_3 */       0x126c6231,
-       /* XFER_UDMA_2 */       0x12486231,
-       /* XFER_UDMA_1 */       0x124c6233,
-       /* XFER_UDMA_0 */       0x12506297,
-
-       /* XFER_MW_DMA_2 */     0x22406c31,
-       /* XFER_MW_DMA_1 */     0x22406c33,
-       /* XFER_MW_DMA_0 */     0x22406c97,
-
-       /* XFER_PIO_4 */        0x06414e31,
-       /* XFER_PIO_3 */        0x06414e42,
-       /* XFER_PIO_2 */        0x06414e53,
-       /* XFER_PIO_1 */        0x06814e93,
-       /* XFER_PIO_0 */        0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
-       /* XFER_UDMA_6 */       0x12848242,
-       /* XFER_UDMA_5 */       0x12848242,
-       /* XFER_UDMA_4 */       0x12ac8242,
-       /* XFER_UDMA_3 */       0x128c8242,
-       /* XFER_UDMA_2 */       0x120c8242,
-       /* XFER_UDMA_1 */       0x12148254,
-       /* XFER_UDMA_0 */       0x121882ea,
-
-       /* XFER_MW_DMA_2 */     0x22808242,
-       /* XFER_MW_DMA_1 */     0x22808254,
-       /* XFER_MW_DMA_0 */     0x228082ea,
-
-       /* XFER_PIO_4 */        0x0a81f442,
-       /* XFER_PIO_3 */        0x0a81f443,
-       /* XFER_PIO_2 */        0x0a81f454,
-       /* XFER_PIO_1 */        0x0ac1f465,
-       /* XFER_PIO_0 */        0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
-       /* XFER_UDMA_6 */       0x1c869c62,
-       /* XFER_UDMA_5 */       0x1cae9c62,     /* 0x1c8a9c62 */
-       /* XFER_UDMA_4 */       0x1c8a9c62,
-       /* XFER_UDMA_3 */       0x1c8e9c62,
-       /* XFER_UDMA_2 */       0x1c929c62,
-       /* XFER_UDMA_1 */       0x1c9a9c62,
-       /* XFER_UDMA_0 */       0x1c829c62,
-
-       /* XFER_MW_DMA_2 */     0x2c829c62,
-       /* XFER_MW_DMA_1 */     0x2c829c66,
-       /* XFER_MW_DMA_0 */     0x2c829d2e,
-
-       /* XFER_PIO_4 */        0x0c829c62,
-       /* XFER_PIO_3 */        0x0c829c84,
-       /* XFER_PIO_2 */        0x0c829ca6,
-       /* XFER_PIO_1 */        0x0d029d26,
-       /* XFER_PIO_0 */        0x0d029d5e
-};
-#else
 /*
  * The following are the new timing tables with PIO mode data/taskfile transfer
  * overclocking fixed...
@@ -424,7 +362,6 @@ static u32 sixty_six_base_hpt37x[] = {
        /* XFER_PIO_1 */        0x0d02ff26,
        /* XFER_PIO_0 */        0x0d42ff7f
 };
-#endif
 
 #define HPT371_ALLOW_ATA133_6          1
 #define HPT302_ALLOW_ATA133_6          1