]> Pileus Git - ~andy/linux/commitdiff
drivers/video/backlight/lp855x_bl.c: use generic PWM functions
authorKim, Milo <Milo.Kim@ti.com>
Tue, 18 Dec 2012 00:00:43 +0000 (16:00 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 18 Dec 2012 01:15:16 +0000 (17:15 -0800)
The LP855x family devices support the PWM input for the backlight control.
 Period of the PWM is configurable in the platform side.  Platform
specific functions are unnecessary anymore because generic PWM functions
are used inside the driver.

(PWM input mode)
To set the brightness, new lp855x_pwm_ctrl() is used.
If a PWM device is not allocated, devm_pwm_get() is called.
The PWM consumer name is from the chip name such as 'lp8550' and 'lp8556'.
To get the brightness value, no additional handling is required.
Just the value of 'props.brightness' is returned.

If the PWM driver is not ready while initializing the LP855x driver, it's
OK.  The PWM device can be retrieved later, when the brightness value is
changed.

Documentation is updated with an example.

[akpm@linux-foundation.org: coding-style simplification, per Thierry]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation/backlight/lp855x-driver.txt
drivers/video/backlight/lp855x_bl.c
include/linux/platform_data/lp855x.h

index f5e4caafab7d6a07dbd030cc017fafbe2458af2b..1529394cfe8b3ed51ca44391b81ed16c8635325d 100644 (file)
@@ -35,11 +35,8 @@ For supporting platform specific data, the lp855x platform data can be used.
 * mode : Brightness control mode. PWM or register based.
 * device_control : Value of DEVICE CONTROL register.
 * initial_brightness : Initial value of backlight brightness.
-* pwm_data : Platform specific pwm generation functions.
+* period_ns : Platform specific PWM period value. unit is nano.
             Only valid when brightness is pwm input mode.
-            Functions should be implemented by PWM driver.
-            - pwm_set_intensity() : set duty of PWM
-            - pwm_get_intensity() : get current duty of PWM
 * load_new_rom_data :
        0 : use default configuration data
        1 : update values of eeprom or eprom registers on loading driver
@@ -71,8 +68,5 @@ static struct lp855x_platform_data lp8556_pdata = {
        .mode = PWM_BASED,
        .device_control = PWM_CONFIG(LP8556),
        .initial_brightness = INITIAL_BRT,
-       .pwm_data = {
-                    .pwm_set_intensity = platform_pwm_set_intensity,
-                    .pwm_get_intensity = platform_pwm_get_intensity,
-                    },
+       .period_ns = 1000000,
 };
index fd985e0681e959a8c8716fe9cca582bf7b3d7804..b437541555ffbc1db13ddb75e68de46d6c0109e5 100644 (file)
@@ -15,6 +15,7 @@
 #include <linux/backlight.h>
 #include <linux/err.h>
 #include <linux/platform_data/lp855x.h>
+#include <linux/pwm.h>
 
 /* Registers */
 #define BRIGHTNESS_CTRL                0x00
@@ -36,6 +37,7 @@ struct lp855x {
        struct device *dev;
        struct mutex xfer_lock;
        struct lp855x_platform_data *pdata;
+       struct pwm_device *pwm;
 };
 
 static int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
@@ -121,6 +123,28 @@ static int lp855x_init_registers(struct lp855x *lp)
        return ret;
 }
 
+static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br)
+{
+       unsigned int period = lp->pdata->period_ns;
+       unsigned int duty = br * period / max_br;
+       struct pwm_device *pwm;
+
+       /* request pwm device with the consumer name */
+       if (!lp->pwm) {
+               pwm = devm_pwm_get(lp->dev, lp->chipname);
+               if (IS_ERR(pwm))
+                       return;
+
+               lp->pwm = pwm;
+       }
+
+       pwm_config(lp->pwm, duty, period);
+       if (duty)
+               pwm_enable(lp->pwm);
+       else
+               pwm_disable(lp->pwm);
+}
+
 static int lp855x_bl_update_status(struct backlight_device *bl)
 {
        struct lp855x *lp = bl_get_data(bl);
@@ -130,12 +154,10 @@ static int lp855x_bl_update_status(struct backlight_device *bl)
                bl->props.brightness = 0;
 
        if (mode == PWM_BASED) {
-               struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
                int br = bl->props.brightness;
                int max_br = bl->props.max_brightness;
 
-               if (pd->pwm_set_intensity)
-                       pd->pwm_set_intensity(br, max_br);
+               lp855x_pwm_ctrl(lp, br, max_br);
 
        } else if (mode == REGISTER_BASED) {
                u8 val = bl->props.brightness;
@@ -150,14 +172,7 @@ static int lp855x_bl_get_brightness(struct backlight_device *bl)
        struct lp855x *lp = bl_get_data(bl);
        enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
 
-       if (mode == PWM_BASED) {
-               struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
-               int max_br = bl->props.max_brightness;
-
-               if (pd->pwm_get_intensity)
-                       bl->props.brightness = pd->pwm_get_intensity(max_br);
-
-       } else if (mode == REGISTER_BASED) {
+       if (mode == REGISTER_BASED) {
                u8 val = 0;
 
                lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
index 761f31752367c46bc61b1715ecb019e963663043..e81f62d24ee261363e94c2cf87f21a931a8ad3b5 100644 (file)
@@ -89,11 +89,6 @@ enum lp8556_brightness_source {
        LP8556_COMBINED2,       /* pwm + i2c after the shaper block */
 };
 
-struct lp855x_pwm_data {
-       void (*pwm_set_intensity) (int brightness, int max_brightness);
-       int (*pwm_get_intensity) (int max_brightness);
-};
-
 struct lp855x_rom_data {
        u8 addr;
        u8 val;
@@ -105,7 +100,7 @@ struct lp855x_rom_data {
  * @mode : brightness control by pwm or lp855x register
  * @device_control : value of DEVICE CONTROL register
  * @initial_brightness : initial value of backlight brightness
- * @pwm_data : platform specific pwm generation functions.
+ * @period_ns : platform specific pwm period value. unit is nano.
                Only valid when mode is PWM_BASED.
  * @load_new_rom_data :
        0 : use default configuration data
@@ -118,7 +113,7 @@ struct lp855x_platform_data {
        enum lp855x_brightness_ctrl_mode mode;
        u8 device_control;
        int initial_brightness;
-       struct lp855x_pwm_data pwm_data;
+       unsigned int period_ns;
        u8 load_new_rom_data;
        int size_program;
        struct lp855x_rom_data *rom_data;