#undef _CACHE
#undef MULTI_CACHE
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v3
-# endif
-#endif
-
#if defined(CONFIG_CPU_CACHE_V4)
# ifdef _CACHE
# define MULTI_CACHE 1
* IOP3XX processor registers
*/
#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000
+#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000
#define IOP3XX_PERIPHERAL_SIZE 0x00002000
#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
IOP3XX_PERIPHERAL_SIZE - 1)
#include <asm/glue.h>
-#define TLB_V3_PAGE (1 << 0)
#define TLB_V4_U_PAGE (1 << 1)
#define TLB_V4_D_PAGE (1 << 2)
#define TLB_V4_I_PAGE (1 << 3)
#define TLB_V6_D_PAGE (1 << 5)
#define TLB_V6_I_PAGE (1 << 6)
-#define TLB_V3_FULL (1 << 8)
#define TLB_V4_U_FULL (1 << 9)
#define TLB_V4_D_FULL (1 << 10)
#define TLB_V4_I_FULL (1 << 11)
* =============
*
* We have the following to choose from:
- * v3 - ARMv3
* v4 - ARMv4 without write buffer
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
if (tlb_flag(TLB_WB))
dsb();
- tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
if (tlb_flag(TLB_WB))
dsb();
- if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
+ if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
- tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
if (tlb_flag(TLB_WB))
dsb();
- if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
+ if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr);
tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr);
tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr);
if (tlb_flag(TLB_WB))
dsb();
- tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr);
tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = {
+static struct notifier_block dbg_cpu_pm_nb = {
.notifier_call = dbg_cpu_pm_notify,
};
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu *leader_pmu = event->group_leader->pmu;
- if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
+ if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
+ return 1;
+
+ if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
return 1;
return armpmu->get_event_idx(hw_events, event) >= 0;
static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
{
return (cyc * mult) >> shift;
}
-static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask)
{
u64 epoch_ns;
u32 epoch_cyc;
#include <asm/virt.h>
#include "atags.h"
-#include "tcm.h"
#if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
reserve_crashkernel();
- tcm_init();
-
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif
#include <asm/mach/map.h>
#include <asm/memory.h>
#include <asm/system_info.h>
-#include "tcm.h"
static struct gen_pool *tcm_pool;
static bool dtcm_present;
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_CACHE_V3 # although the core is v4t
+ select CPU_CACHE_V4
select CPU_CP15_MPU
select CPU_PABRT_LEGACY
help
bool
# The cache model
-config CPU_CACHE_V3
- bool
-
config CPU_CACHE_V4
bool
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
-obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
outer_cache.inv_range = feroceon_l2_inv_range;
outer_cache.clean_range = feroceon_l2_clean_range;
outer_cache.flush_range = feroceon_l2_flush_range;
+ outer_cache.inv_all = l2_inv_all;
enable_l2();
+++ /dev/null
-/*
- * linux/arch/arm/mm/cache-v3.S
- *
- * Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include "proc-macros.S"
-
-/*
- * flush_icache_all()
- *
- * Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(v3_flush_icache_all)
- mov pc, lr
-ENDPROC(v3_flush_icache_all)
-
-/*
- * flush_user_cache_all()
- *
- * Invalidate all cache entries in a particular address
- * space.
- *
- * - mm - mm_struct describing address space
- */
-ENTRY(v3_flush_user_cache_all)
- /* FALLTHROUGH */
-/*
- * flush_kern_cache_all()
- *
- * Clean and invalidate the entire cache.
- */
-ENTRY(v3_flush_kern_cache_all)
- /* FALLTHROUGH */
-
-/*
- * flush_user_cache_range(start, end, flags)
- *
- * Invalidate a range of cache entries in the specified
- * address space.
- *
- * - start - start address (may not be aligned)
- * - end - end address (exclusive, may not be aligned)
- * - flags - vma_area_struct flags describing address space
- */
-ENTRY(v3_flush_user_cache_range)
- mov ip, #0
- mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache
- mov pc, lr
-
-/*
- * coherent_kern_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start. If you have non-snooping
- * Harvard caches, you need to implement this function.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_coherent_kern_range)
- /* FALLTHROUGH */
-
-/*
- * coherent_user_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start. If you have non-snooping
- * Harvard caches, you need to implement this function.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_coherent_user_range)
- mov r0, #0
- mov pc, lr
-
-/*
- * flush_kern_dcache_area(void *page, size_t size)
- *
- * Ensure no D cache aliasing occurs, either with itself or
- * the I cache
- *
- * - addr - kernel address
- * - size - region size
- */
-ENTRY(v3_flush_kern_dcache_area)
- /* FALLTHROUGH */
-
-/*
- * dma_flush_range(start, end)
- *
- * Clean and invalidate the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(v3_dma_flush_range)
- mov r0, #0
- mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
- mov pc, lr
-
-/*
- * dma_unmap_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-ENTRY(v3_dma_unmap_area)
- teq r2, #DMA_TO_DEVICE
- bne v3_dma_flush_range
- /* FALLTHROUGH */
-
-/*
- * dma_map_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-ENTRY(v3_dma_map_area)
- mov pc, lr
-ENDPROC(v3_dma_unmap_area)
-ENDPROC(v3_dma_map_area)
-
- .globl v3_flush_kern_cache_louis
- .equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all
-
- __INITDATA
-
- @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
- define_cache_functions v3
ENTRY(v4_flush_user_cache_range)
#ifdef CONFIG_CPU_CP15
mov ip, #0
- mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache
+ mcr p15, 0, ip, c7, c7, 0 @ flush ID cache
mov pc, lr
#else
/* FALLTHROUGH */
#include <asm/mach/pci.h>
#include "mm.h"
+#include "tcm.h"
/*
* empty_zero_page is a special page that is used for
dma_contiguous_remap();
devicemaps_init(mdesc);
kmap_init();
+ tcm_init();
top_pmd = pmd_off_k(0xffff0000);
mcr p15, 0, r0, c6, c0 @ set area 0, default
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
- ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
- mov r2, #10 @ 11 is the minimum (4KB)
-1: add r2, r2, #1 @ area size *= 2
- mov r1, r1, lsr #1
+ ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
+ mov r4, #10 @ 11 is the minimum (4KB)
+1: add r4, r4, #1 @ area size *= 2
+ movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
- orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
- ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
- mov r2, #10 @ 11 is the minimum (4KB)
-1: add r2, r2, #1 @ area size *= 2
- mov r1, r1, lsr #1
+ ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
+ cmp r3, #0
+ moveq r0, #0
+ beq 2f
+ mov r4, #10 @ 11 is the minimum (4KB)
+1: add r4, r4, #1 @ area size *= 2
+ movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
- orr r0, r0, r2, lsl #1 @ the area register value
+ orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
- mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
+2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
mov r0, #0x06
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
.long 0x41807400
.long 0xfffffff0
.long 0
+ .long 0
b __arm740_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT
.long cpu_arm740_name
.long arm740_processor_functions
.long 0
.long 0
- .long v3_cache_fns @ cache model
+ .long v4_cache_fns @ cache model
.size __arm740_proc_info, . - __arm740_proc_info
#ifndef MULTI_CPU
EXPORT_SYMBOL(cpu_dcache_clean_area);
+#ifdef CONFIG_MMU
EXPORT_SYMBOL(cpu_set_pte_ext);
+#endif
#else
EXPORT_SYMBOL(processor);
#endif
projects / ~andy / linux / commitdiff