]> Pileus Git - ~andy/linux/commitdiff
w1: add 1-wire (w1) DS2408 8-Channel Addressable Switch support
authorJean-François Dagenais <dagenaisj@sonatest.com>
Thu, 26 May 2011 23:26:02 +0000 (16:26 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 27 May 2011 00:12:38 +0000 (17:12 -0700)
This DS2408 w1 slave driver is not complete for all the features of the
chip, but its sufficient if you use it as a simple IO expander.

[randy.dunlap@oracle.com: fix w1_ds2408.c printk formats]
Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/w1/slaves/Kconfig
drivers/w1/slaves/Makefile
drivers/w1/slaves/w1_ds2408.c [new file with mode: 0644]
drivers/w1/w1_family.h

index f0c909625bd1246991af2b0cda78de80b1d504da..cd1b72411bd44dcf5062d7403be64dc01cd4fd55 100644 (file)
@@ -16,6 +16,13 @@ config W1_SLAVE_SMEM
          Say Y here if you want to connect 1-wire
          simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
 
+config W1_SLAVE_DS2408
+        tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)"
+        help
+          Say Y here if you want to use a 1-wire
+
+                 DS2408 8-Channel Addressable Switch device support
+
 config W1_SLAVE_DS2423
        tristate "Counter 1-wire device (DS2423)"
        select CRC16
index 3c76350a24f7656097d6fde70673d50be4c4ca9c..75e3913910bb897931c0353e534719dd15e0c9e7 100644 (file)
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_W1_SLAVE_THERM)   += w1_therm.o
 obj-$(CONFIG_W1_SLAVE_SMEM)    += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2408)   += w1_ds2408.o
 obj-$(CONFIG_W1_SLAVE_DS2423)  += w1_ds2423.o
 obj-$(CONFIG_W1_SLAVE_DS2431)  += w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2433)  += w1_ds2433.o
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
new file mode 100644 (file)
index 0000000..c377818
--- /dev/null
@@ -0,0 +1,402 @@
+/*
+ *     w1_ds2408.c - w1 family 29 (DS2408) driver
+ *
+ * Copyright (c) 2010 Jean-Francois Dagenais <dagenaisj@sonatest.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@sonatest.com>");
+MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO");
+
+
+#define W1_F29_RETRIES         3
+
+#define W1_F29_REG_LOGIG_STATE             0x88 /* R */
+#define W1_F29_REG_OUTPUT_LATCH_STATE      0x89 /* R */
+#define W1_F29_REG_ACTIVITY_LATCH_STATE    0x8A /* R */
+#define W1_F29_REG_COND_SEARCH_SELECT_MASK 0x8B /* RW */
+#define W1_F29_REG_COND_SEARCH_POL_SELECT  0x8C /* RW */
+#define W1_F29_REG_CONTROL_AND_STATUS      0x8D /* RW */
+
+#define W1_F29_FUNC_READ_PIO_REGS          0xF0
+#define W1_F29_FUNC_CHANN_ACCESS_READ      0xF5
+#define W1_F29_FUNC_CHANN_ACCESS_WRITE     0x5A
+/* also used to write the control/status reg (0x8D): */
+#define W1_F29_FUNC_WRITE_COND_SEARCH_REG  0xCC
+#define W1_F29_FUNC_RESET_ACTIVITY_LATCHES 0xC3
+
+#define W1_F29_SUCCESS_CONFIRM_BYTE        0xAA
+
+static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
+{
+       u8 wrbuf[3];
+       dev_dbg(&sl->dev,
+                       "Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
+                       sl, (unsigned int)address, buf);
+
+       if (!buf)
+               return -EINVAL;
+
+       mutex_lock(&sl->master->mutex);
+       dev_dbg(&sl->dev, "mutex locked");
+
+       if (w1_reset_select_slave(sl)) {
+               mutex_unlock(&sl->master->mutex);
+               return -EIO;
+       }
+
+       wrbuf[0] = W1_F29_FUNC_READ_PIO_REGS;
+       wrbuf[1] = address;
+       wrbuf[2] = 0;
+       w1_write_block(sl->master, wrbuf, 3);
+       *buf = w1_read_8(sl->master);
+
+       mutex_unlock(&sl->master->mutex);
+       dev_dbg(&sl->dev, "mutex unlocked");
+       return 1;
+}
+
+static ssize_t w1_f29_read_state(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+               "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p",
+               bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj), W1_F29_REG_LOGIG_STATE, buf);
+}
+
+static ssize_t w1_f29_read_output(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+               "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p",
+               bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj),
+                                        W1_F29_REG_OUTPUT_LATCH_STATE, buf);
+}
+
+static ssize_t w1_f29_read_activity(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+               "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p",
+               bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj),
+                                        W1_F29_REG_ACTIVITY_LATCH_STATE, buf);
+}
+
+static ssize_t w1_f29_read_cond_search_mask(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+               "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p",
+               bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj),
+               W1_F29_REG_COND_SEARCH_SELECT_MASK, buf);
+}
+
+static ssize_t w1_f29_read_cond_search_polarity(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj),
+               W1_F29_REG_COND_SEARCH_POL_SELECT, buf);
+}
+
+static ssize_t w1_f29_read_status_control(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       if (count != 1 || off != 0)
+               return -EFAULT;
+       return _read_reg(kobj_to_w1_slave(kobj),
+               W1_F29_REG_CONTROL_AND_STATUS, buf);
+}
+
+
+
+
+static ssize_t w1_f29_write_output(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       struct w1_slave *sl = kobj_to_w1_slave(kobj);
+       u8 w1_buf[3];
+       u8 readBack;
+       unsigned int retries = W1_F29_RETRIES;
+
+       if (count != 1 || off != 0)
+               return -EFAULT;
+
+       dev_dbg(&sl->dev, "locking mutex for write_output");
+       mutex_lock(&sl->master->mutex);
+       dev_dbg(&sl->dev, "mutex locked");
+
+       if (w1_reset_select_slave(sl))
+               goto error;
+
+       while (retries--) {
+               w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE;
+               w1_buf[1] = *buf;
+               w1_buf[2] = ~(*buf);
+               w1_write_block(sl->master, w1_buf, 3);
+
+               readBack = w1_read_8(sl->master);
+               /* here the master could read another byte which
+                  would be the PIO reg (the actual pin logic state)
+                  since in this driver we don't know which pins are
+                  in and outs, there's no value to read the state and
+                  compare. with (*buf) so end this command abruptly: */
+               if (w1_reset_resume_command(sl->master))
+                       goto error;
+
+               if (readBack != 0xAA) {
+                       /* try again, the slave is ready for a command */
+                       continue;
+               }
+
+               /* go read back the output latches */
+               /* (the direct effect of the write above) */
+               w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS;
+               w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE;
+               w1_buf[2] = 0;
+               w1_write_block(sl->master, w1_buf, 3);
+               /* read the result of the READ_PIO_REGS command */
+               if (w1_read_8(sl->master) == *buf) {
+                       /* success! */
+                       mutex_unlock(&sl->master->mutex);
+                       dev_dbg(&sl->dev,
+                               "mutex unlocked, retries:%d", retries);
+                       return 1;
+               }
+       }
+error:
+       mutex_unlock(&sl->master->mutex);
+       dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries);
+
+       return -EIO;
+}
+
+
+/**
+ * Writing to the activity file resets the activity latches.
+ */
+static ssize_t w1_f29_write_activity(
+       struct file *filp, struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf, loff_t off, size_t count)
+{
+       struct w1_slave *sl = kobj_to_w1_slave(kobj);
+       unsigned int retries = W1_F29_RETRIES;
+
+       if (count != 1 || off != 0)
+               return -EFAULT;
+
+       mutex_lock(&sl->master->mutex);
+
+       if (w1_reset_select_slave(sl))
+               goto error;
+
+       while (retries--) {
+               w1_write_8(sl->master, W1_F29_FUNC_RESET_ACTIVITY_LATCHES);
+               if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE) {
+                       mutex_unlock(&sl->master->mutex);
+                       return 1;
+               }
+               if (w1_reset_resume_command(sl->master))
+                       goto error;
+       }
+
+error:
+       mutex_unlock(&sl->master->mutex);
+       return -EIO;
+}
+
+static ssize_t w1_f29_write_status_control(
+       struct file *filp,
+       struct kobject *kobj,
+       struct bin_attribute *bin_attr,
+       char *buf,
+       loff_t off,
+       size_t count)
+{
+       struct w1_slave *sl = kobj_to_w1_slave(kobj);
+       u8 w1_buf[4];
+       unsigned int retries = W1_F29_RETRIES;
+
+       if (count != 1 || off != 0)
+               return -EFAULT;
+
+       mutex_lock(&sl->master->mutex);
+
+       if (w1_reset_select_slave(sl))
+               goto error;
+
+       while (retries--) {
+               w1_buf[0] = W1_F29_FUNC_WRITE_COND_SEARCH_REG;
+               w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS;
+               w1_buf[2] = 0;
+               w1_buf[3] = *buf;
+
+               w1_write_block(sl->master, w1_buf, 4);
+               if (w1_reset_resume_command(sl->master))
+                       goto error;
+
+               w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS;
+               w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS;
+               w1_buf[2] = 0;
+
+               w1_write_block(sl->master, w1_buf, 3);
+               if (w1_read_8(sl->master) == *buf) {
+                       /* success! */
+                       mutex_unlock(&sl->master->mutex);
+                       return 1;
+               }
+       }
+error:
+       mutex_unlock(&sl->master->mutex);
+
+       return -EIO;
+}
+
+
+
+#define NB_SYSFS_BIN_FILES 6
+static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
+       {
+               .attr = {
+                       .name = "state",
+                       .mode = S_IRUGO,
+               },
+               .size = 1,
+               .read = w1_f29_read_state,
+       },
+       {
+               .attr = {
+                       .name = "output",
+                       .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+               },
+               .size = 1,
+               .read = w1_f29_read_output,
+               .write = w1_f29_write_output,
+       },
+       {
+               .attr = {
+                       .name = "activity",
+                       .mode = S_IRUGO,
+               },
+               .size = 1,
+               .read = w1_f29_read_activity,
+               .write = w1_f29_write_activity,
+       },
+       {
+               .attr = {
+                       .name = "cond_search_mask",
+                       .mode = S_IRUGO,
+               },
+               .size = 1,
+               .read = w1_f29_read_cond_search_mask,
+               .write = 0,
+       },
+       {
+               .attr = {
+                       .name = "cond_search_polarity",
+                       .mode = S_IRUGO,
+               },
+               .size = 1,
+               .read = w1_f29_read_cond_search_polarity,
+               .write = 0,
+       },
+       {
+               .attr = {
+                       .name = "status_control",
+                       .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+               },
+               .size = 1,
+               .read = w1_f29_read_status_control,
+               .write = w1_f29_write_status_control,
+       }
+};
+
+static int w1_f29_add_slave(struct w1_slave *sl)
+{
+       int err = 0;
+       int i;
+
+       for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
+               err = sysfs_create_bin_file(
+                       &sl->dev.kobj,
+                       &(w1_f29_sysfs_bin_files[i]));
+       if (err)
+               while (--i >= 0)
+                       sysfs_remove_bin_file(&sl->dev.kobj,
+                               &(w1_f29_sysfs_bin_files[i]));
+       return err;
+}
+
+static void w1_f29_remove_slave(struct w1_slave *sl)
+{
+       int i;
+       for (i = NB_SYSFS_BIN_FILES; i <= 0; --i)
+               sysfs_remove_bin_file(&sl->dev.kobj,
+                       &(w1_f29_sysfs_bin_files[i]));
+}
+
+static struct w1_family_ops w1_f29_fops = {
+       .add_slave      = w1_f29_add_slave,
+       .remove_slave   = w1_f29_remove_slave,
+};
+
+static struct w1_family w1_family_29 = {
+       .fid = W1_FAMILY_DS2408,
+       .fops = &w1_f29_fops,
+};
+
+static int __init w1_f29_init(void)
+{
+       return w1_register_family(&w1_family_29);
+}
+
+static void __exit w1_f29_exit(void)
+{
+       w1_unregister_family(&w1_family_29);
+}
+
+module_init(w1_f29_init);
+module_exit(w1_f29_exit);
index f3b636d7cafe76360bf41e6be048eddb9da3c256..75137590c3bc82603b83197c68da95f4250448a2 100644 (file)
@@ -34,6 +34,7 @@
 #define W1_THERM_DS1822        0x22
 #define W1_EEPROM_DS2433       0x23
 #define W1_THERM_DS18B20       0x28
+#define W1_FAMILY_DS2408       0x29
 #define W1_EEPROM_DS2431       0x2D
 #define W1_FAMILY_DS2760       0x30